Уязвимости linux · Страница 8

flow_dissector: avoid u16 truncation of skb->len when computing thoff

In the Linux kernel, the following vulnerability has been resolved: flow_dissector: avoid u16 truncation of skb->len when computing thoff __skb_flow_dissect() computes key_control->thoff using: key_control->thoff = min_t(u16, nhoff, skb ? skb->len : hlen); min_t(u16, ...) casts both arguments to u16 before comparing them. Whenever skb->len (or hlen) modulo 65536 is smaller than nhoff, the truncated length wins and thoff is set to a bogus small value, even when the dissection succeeded. For example, an IPv4/TCP frame with skb->len == 65540 and nhoff == 34 gets thoff == 4, so callers such as skb_probe_transport_header() point the transpor

net: always dissect GSO packets in __virtio_net_hdr_to_skb()

In the Linux kernel, the following vulnerability has been resolved: net: always dissect GSO packets in __virtio_net_hdr_to_skb() Commit 9e8db5913264 ("net: avoid false positives in untrusted gso validation") added a '&& skb->network_header' check before flow-dissecting GSO packets without VIRTIO_NET_HDR_F_NEEDS_CSUM in __virtio_net_hdr_to_skb(), because some callers (such as tun_get_user(), tun_xdp_one(), virtnet_receive_done(), and raw_verify_header()) called virtio_net_hdr_*_to_skb() before initializing skb->network_header and skb->dev. Because __alloc_skb() and __build_skb_around() zero-initialize skb->network_header to 0 (unlike mac_he

flow_dissector: avoid u16 truncation of hlen in bpf_flow_dissect()

In the Linux kernel, the following vulnerability has been resolved: flow_dissector: avoid u16 truncation of hlen in bpf_flow_dissect() bpf_flow_dissect() sanitizes the offsets returned by the BPF program with clamp_t(u16, ..., hlen). If hlen is bigger than 65535, the upper bound is truncated before the comparison. For instance, with hlen == 65536, both nhoff and thoff are forced to zero, even if the program returned sane values. This is the same class of bug as the one fixed in commit 99bda1ecbd56 ("flow_dissector: avoid u16 truncation of skb->len when computing thoff"). That fix does not cover the BPF path, because __skb_flow_dissect() r

vsock: Fix memory leak in vmci_transport_recv_dgram_cb()

In the Linux kernel, the following vulnerability has been resolved: vsock: Fix memory leak in vmci_transport_recv_dgram_cb() During the closure of a datagram socket, the vmci_transport_recv_dgram_cb() function may be called, which will add the packets to the socket's backlog; then, after the receive queue is cleared, the __release_sock() function will move the packet back from the socket's backlog to the receive queue, which will lead to a memory leak. sock_close __sock_release __vsock_release // take ownership by user-space lock_sock_nested sock_set_flag(sk, SOCK_DEAD) vmci_transport_release

drm/vc4: Disable the V3D interrupt across runtime suspend

In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Disable the V3D interrupt across runtime suspend vc4_irq_disable() masks the V3D interrupt sources and then calls synchronize_irq() before the V3D is powered down. However, by itself, this is not enough to quiesce the interrupt handler. synchronize_irq() waits for handlers that have already set IRQD_IRQ_INPROGRESS, and for irqchips reporting IRQCHIP_STATE_ACTIVE. A GIC interrupt chip is able to mark an interrupt active as soon as a CPU acknowledges it, so there these checks cover the whole dispatch path. On RPi 0-3, however, the interrupt controller is ARMCTRL, wh

HID: steam: Rearrange teardown sequence

In the Linux kernel, the following vulnerability has been resolved: HID: steam: Rearrange teardown sequence This fixes a narrow window during the teardown sequence where callbacks could still be scheduled during cleanup that would then have a dangling pointer to the now-freed steam struct. This also puts work canceling for rumble and mode switch in steam_unregister, as that shouldn't persist while the client hdev is open.

HID: steam: Refactor registration

In the Linux kernel, the following vulnerability has been resolved: HID: steam: Refactor registration This refactors and simplifies the registration/unregistration flow. Since we now only perform registration when the client isn't opened anymore, the logic for handling that can be removed, and the rest of the function streamlined. We also remove the previous assumption that we have a serial number to show we're registered, replacing it with a single purpose boolean. In a previous refactor the code for unregistering a battery if later registration steps failed was accidentally left out. As a result, a lingering power_supply object could ge

sched_ext: Build the cid tables privately and publish them with RCU

In the Linux kernel, the following vulnerability has been resolved: sched_ext: Build the cid tables privately and publish them with RCU The cid tables are visible to the cid kfuncs while being modified: the first enable publishes the global pointers before filling them, ops.init_cids() overrides rewrite them in place, and re-enables rebuild them in place. A racing TRACING or SYSCALL program can read unfilled entries, including uninitialized memory in the kmalloc'd tables, or torn topo updates. Tie the tables' lifetimes to the root sched instead: each root enable builds a fresh set privately and publishes the per-table __rcu globals once th

ASoC: qcom: lpass-cpu: use DAI table index for playback constraints

In the Linux kernel, the following vulnerability has been resolved: ASoC: qcom: lpass-cpu: use DAI table index for playback constraints The DAI ID is a hardware port ID and is not necessarily the index of the corresponding entry in variant->dai_driver. When configuring a DAI with LPAIF_I2SCTL_MODE_QUAD01, the probe code currently uses dai_id to index variant->dai_driver. This is incorrect for platforms where DAI IDs are sparse. For example, the IPQ806x MI2S DAI has ID 4 while it is the only entry in the DAI driver table. If that DAI is configured for QUAD01 and probe reaches this branch, the code writes beyond that single entry via dai_dri

perf/core: Check kernel access when kernel callchains are requested

In the Linux kernel, the following vulnerability has been resolved: perf/core: Check kernel access when kernel callchains are requested perf_event_open() currently gates perf_allow_kernel() only on !attr.exclude_kernel. However, users can still request kernel callchain collection with attr.exclude_callchain_kernel == 0 even when attr.exclude_kernel == 1. That still requires kernel profiling privilege, but the existing check does not enforce it. Update the permission check to call perf_allow_kernel() when either kernel sampling is requested or kernel callchains are requested. This keeps permission checks aligned with requested data and pr

wifi: ath11k: reset ar->num_stations on hardware start

In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: reset ar->num_stations on hardware start When (multiple) hw restart occurs, we end up in a situation where we cannot accept new stations / mesh peers. This seems to be the 'num_stations' in 'struct ath11k' that did not get reset properly in this case. In ath11k_mac_op_start(), it was indeed the only accounting var that did not get reset so let's clear it too. This avoids problems like those: [1248828.088023] WARNING: CPU: 0 PID: 12281 at net/mac80211/util.c:1682 ieee80211_reconfig_stations+0x98/0xc0 [1248828.088115] Call trace: [1248828.088116] ieee80211

rtc: dev: zero-initialize struct rtc_wkalrm to prevent information leak

In the Linux kernel, the following vulnerability has been resolved: rtc: dev: zero-initialize struct rtc_wkalrm to prevent information leak The struct rtc_wkalrm has padding holes after the 'pending' member. When returned to userspace via the RTC_WKALRM_RD ioctl, uninitialized kernel stack data residing in these holes may be leaked. Zero-initialize the struct at declaration to eliminate this information leak risk. Fixes smatch warnings: - drivers/rtc/dev.c:392 rtc_dev_ioctl() warn: check that 'alarm' doesn't leak information (struct has a hole after 'pending')

ipv6: sr: use skb_get_hash_net() in seg6_make_flowlabel()

In the Linux kernel, the following vulnerability has been resolved: ipv6: sr: use skb_get_hash_net() in seg6_make_flowlabel() Since commit d58e468b1112 ("flow_dissector: implements flow dissector BPF hook") __skb_flow_dissect() needs a net pointer, either from skb->dev, skb->sk, or since commit 3cbf4ffba5ee ("net: plumb network namespace into __skb_flow_dissect") a caller provided pointer. syzbot was able to reach seg6_make_flowlabel() with an skb having neither skb->dev nor skb->sk set: a TIPC UDP bearer sends a discovery message through an IPv4 route using seg6 encap, while net.ipv6.seg6_flowlabel is set to 1. seg6_make_flowlabel() alre

usb: hub: use shorter 120ms post resume hold for SS root hubs

In the Linux kernel, the following vulnerability has been resolved: usb: hub: use shorter 120ms post resume hold for SS root hubs Holding a USB3 hub PM runtime reference for 200ms at hub resume triggers an AMD platform issue. Users running Android adb report crashes after adb has been polling and waking up the USB subsystem once a second for some time. Vendors are working on a solution. Disabling USB runtime PM is one way to prevent this issue, but it is also proven that reducing the hold time to 120ms in resume also mitigates it. See Link for more details. Reducing the hold time to 120ms for the USB3 roothub is in itself a valid chang

EDAC/altera: Fix use-after-free in error paths

In the Linux kernel, the following vulnerability has been resolved: EDAC/altera: Fix use-after-free in error paths In both altr_edac_a10_device_add() and altr_portb_setup(), the error path freed the dci structure before releasing the devres group. Since the managed single and double bit IRQ handlers use altdev(dci->pvt_info) as their data, an IRQ firing between freeing dci and unregistering the IRQs could dereference the freed memory. Release the devres group first so the managed IRQs are unregistered before the dci structure is freed.

mtd: spinand: fix NULL pointer dereference with no ECC engine

In the Linux kernel, the following vulnerability has been resolved: mtd: spinand: fix NULL pointer dereference with no ECC engine When "nand-no-ecc-engine" is set in DT, nanddev_get_ecc_engine() takes the NAND_ECC_ENGINE_TYPE_NONE path and returns success while leaving nand->ecc.engine NULL. The SPI-NAND code nevertheless dereferences it unconditionally to test for a pipelined engine, so probing such a device oopses immediately. Rather than open-coding the test three times, add a nand_ecc_is_pipelined() helper to the NAND core that folds the NULL check into the integration comparison, and use it everywhere. Future callers then cannot reint

KVM: s390: Fix IRQ injection with SIGP Stop and Store Status

In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Fix IRQ injection with SIGP Stop and Store Status When __inject_sigp_stop() is called for a Stop and Store Status operation, if the vCPU is running, the interrupt is marked as pending and the status is stored by the thread performing the KVM_RUN IOCTL. If the vCPU is already stopped, the status is stored immediately. Storing the status means writing into userspace, which might fault, and __inject_sigp_stop() is called from do_inject_vcpu() which in turn is always called holding a spinlock, which is obviously an issue. Fix this by returning -EWOULDBLOCK from __

macsec: initialize SecY before registering the netdevice

In the Linux kernel, the following vulnerability has been resolved: macsec: initialize SecY before registering the netdevice Creating a MACsec device with MAC offload over an LRO-capable lower device triggers a warning in rtmsg_ifinfo_build_skb() when IPv4 forwarding is enabled by default. register_netdevice() invokes inetdev_init(), which disables LRO and emits a NETDEV_FEAT_CHANGE notification. This reaches macsec_fill_info() before macsec_add_dev() initializes the SecY. key_len is still zero, so macsec_fill_info() returns -EMSGSIZE and trips the WARN_ON in rtmsg_ifinfo_build_skb(), even though the skb has enough space. Even without the

drm/amd/display: Remove sink usage from DPMS

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Remove sink usage from DPMS [Why] stream->sink is optional and can be null, so should always be checked before dereference. Additionally, most of its usage in DPMS sequences is for stream->sink->link, which can be replaced with stream->link, as the two should always be the same. [How] * Replace stream->sink->link in DPMS on/off * Add assert to USB4 BW allocation where sink is required * Avoid inconsistencies in resource access, e.g. don't repeat stream->link after it was already saved to a local variable * Pull out effective VPG calculation to helper gette

bpf, sockmap: Fix self-redirect copied_seq double-counting

In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix self-redirect copied_seq double-counting When a BPF stream_verdict program redirects an skb back to the same socket (self-redirect with BPF_F_INGRESS), sk_psock_verdict_apply() calls tcp_eat_skb() which advances tcp_sk->copied_seq. However, the skb is then delivered to the socket's psock ingress queue and later read by tcp_bpf_recvmsg_parser(), which also advances copied_seq via the copied_from_self accounting path. This double-counting causes copied_seq to advance by 2x the actual data length, triggering: TCP recvmsg seq # bug 2: copied BF2E806, seq BF

• Обновитесь до 6.1.190-1