Уязвимости linux · Страница 76

bpf: Fix WARNING in bpf_tracing_link_release

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix WARNING in bpf_tracing_link_release The trampoline could be corrupted by the blindly 'tr->flags = BPF_TRAMP_F_TAIL_CALL_CTX' in verifier. 1. A fexit attached to a tail_call_reachable prog. 'tr->flags' became 'BPF_TRAMP_F_CALL_ORIG | BPF_TRAMP_F_TAIL_CALL_CTX'. And, the trampoline would poke the target prog's nop insn using jmp insn instead of call insn. 2. Another fexit loaded with the same tail_call_reachable prog target. 'tr->flags' became 'BPF_TRAMP_F_TAIL_CALL_CTX'. 3. Close the first fexit link. Due to no BPF_TRAMP_F_CALL_ORIG in 'tr->flags', t

cxl/region: Fix use-after-free in find_pos_and_ways() error path

In the Linux kernel, the following vulnerability has been resolved: cxl/region: Fix use-after-free in find_pos_and_ways() error path The error path releases its reference to a switch decoder before logging an error that includes the decoder name. If the released reference is the last one, the decoder can be freed before the error message accesses its name. Drop the reference after the error is reported.

• Обновитесь до 6.12.111-1

pinctrl: mediatek: use devm_gpiochip_add_data() for GPIO chip

In the Linux kernel, the following vulnerability has been resolved: pinctrl: mediatek: use devm_gpiochip_add_data() for GPIO chip The gpio_chip is allocated with device-managed memory but registered with the non-managed gpiochip_add_data(). This was harmless while the drivers were built-in, but once they can be built as modules and unbound/rmmod'd, devm frees the gpio_chip's memory while it is still registered, causing a use-after-free. Register it with devm_gpiochip_add_data() so it shares the same device-managed lifecycle, which also lets the manual gpiochip_remove() error paths go away.

pinctrl: mediatek: free EINT resources on unbind

In the Linux kernel, the following vulnerability has been resolved: pinctrl: mediatek: free EINT resources on unbind mtk_eint_do_init() creates an IRQ domain, populates it with a mapping for every EINT line and installs a chained handler on the parent interrupt, but none of these are ever released. This was harmless while the drivers were built-in, but now that they can be built as modules and unbound/rmmod'd it leaves behind a dangling IRQ domain, interrupt mappings whose chip data points at freed memory, and a chained handler that keeps firing into that freed data. The plain allocations in mtk_eint_do_init() already use the device-manage

• Обновитесь до 6.12.111-1

scsi: ufs: core: Validate string descriptors

In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Validate string descriptors The string descriptor length includes a two-byte header while the UTF-16 payload starts after it. utf16s_to_utf8s() expects a count of UTF-16 code units, not bytes. Passing the payload byte count can make it read beyond the descriptor buffer. Validate that the payload has an even byte count, pass a code-unit count to the converter, and allocate sufficient UTF-8 output space. The raw string buffer starts after the descriptor header but its size is bLength. Copying bLength bytes from that pointer can read beyond the response buff

scsi: ufs: debugfs: Reserve space for a string terminator

In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: debugfs: Reserve space for a string terminator ufs_saved_err_write() copies user input into a zero-initialized stack buffer and passes it to kstrtoint(). A write that fills the entire buffer overwrites its only terminator. Reject an input whose length leaves no room for the trailing NUL.

• Обновитесь до 6.12.111-1

crypto: keembay - Initialize completion before requesting IRQ

In the Linux kernel, the following vulnerability has been resolved: crypto: keembay - Initialize completion before requesting IRQ kmb_ocs_aes_probe() requests the device IRQ before initializing irq_completion. Once the handler is registered it can run immediately, and ocs_aes_irq_handler() unconditionally calls complete(). An interrupt in this window would therefore use an uninitialized completion. Initialize the completion before requesting the IRQ, as the sibling OCS HCU and ECC drivers already do.

• Обновитесь до 6.12.111-1

RDMA/mlx5: Fix integer overflow of user QP buffer size

In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix integer overflow of user QP buffer size set_user_buf_size() computes the QP buffer size by left-shifting the user-supplied rq.wqe_cnt and rq.wqe_shift values as signed integers. A sufficiently large rq.wqe_cnt causes signed integer overflow, which is undefined behavior, and yields a small or negative buf_size, causing ib_umem_get() to map a buffer smaller than the hardware will actually write into. Replace the shifts and addition with check_shl_overflow() and check_add_overflow(), rejecting invalid user inputs. Moreover, guard the identical shift computing

• Обновитесь до 6.12.111-1

isofs: release zisofs block pointer buffer head

In the Linux kernel, the following vulnerability has been resolved: isofs: release zisofs block pointer buffer head zisofs_fill_pages() reads the compressed block pointer table. The error paths release the current buffer_head, the loop also releases the old buffer_head when it advances. However, the success path leaves the last buffer_head referenced. Release it before returning success.

• Обновитесь до 6.12.111-1

spi: oc-tiny: switch to managed controller allocation

In the Linux kernel, the following vulnerability has been resolved: spi: oc-tiny: switch to managed controller allocation The controller is allocated with the non-managed spi_alloc_host() while the interrupt is registered with devm_request_irq(). During removal, spi_bitbang_stop() only unregisters the controller; the subsequent spi_controller_put() then frees the controller together with its embedded driver-private devdata, which is the IRQ handler's dev_id. The devm_request_irq() release action (free_irq()), which drains the handler, does not run until after .remove() returns. A late or latched interrupt can therefore reach tiny_spi_irq

• Обновитесь до 6.12.111-1

remoteproc: Prevent crash handling to race with rproc_del()

In the Linux kernel, the following vulnerability has been resolved: remoteproc: Prevent crash handling to race with rproc_del() There's no synchronization between rproc_crash_handler_work() and rproc_del(), as such it's possible for a driver to be removed while crash-handler work is scheduled, or even executing - resulting in use-after-free issues. To avoid this the scheduled work need to be cancelled and synchronized against before the removal proceeds. In order to ensure that this doesn't race with the reporting, and thereby scheduling new work, a "deleting" flag is introduced. This is similar to the RPROC_DELETE state that was introduc

• Обновитесь до 6.12.111-1

iommu/tegra241-cmdqv: Publish an LVCMDQ only after it is fully initialized

In the Linux kernel, the following vulnerability has been resolved: iommu/tegra241-cmdqv: Publish an LVCMDQ only after it is fully initialized tegra241_vintf_init_lvcmdq() stores the freshly allocated vcmdq pointer to the vintf->lvcmdqs[] array, before tegra241_vcmdq_alloc_smmu_cmdq() builds the vcmdq->cmdq. The error ISR dereferences that cmdq, so a latched LVCMDQ error (e.g. one inherited across a kexec) firing in this window would make tegra241_vintf0_handle_error() pass the still-zeroed arm_smmu_cmdq down to __arm_smmu_cmdq_skip_err(), dereferencing NULL queue register pointers. Drop the store from tegra241_vintf_init_lvcmdq() and publ

• Обновитесь до 6.12.111-1

iommu/tegra241-cmdqv: Don't run the error ISR before probe sets up vintfs

In the Linux kernel, the following vulnerability has been resolved: iommu/tegra241-cmdqv: Don't run the error ISR before probe sets up vintfs __tegra241_cmdqv_probe() requests the error IRQ before it has allocated the cmdqv->vintfs array and set cmdqv->num_vintfs. A CMDQV left enabled with a latched error across a kexec fires the IRQ as soon as it is requested, and tegra241_cmdqv_isr() then walks the uninitialized cmdqv->vintfs array. Request the IRQ only after cmdqv->vintfs is allocated and zeroed, so that a latched interrupt firing early runs the ISR against a valid array of NULL slots that it safely skips.

• Обновитесь до 6.12.111-1

iommu/tegra241-cmdqv: Don't fall back to a freed smmu after devm_krealloc()

In the Linux kernel, the following vulnerability has been resolved: iommu/tegra241-cmdqv: Don't fall back to a freed smmu after devm_krealloc() __tegra241_cmdqv_probe() uses devm_krealloc() to grow @smmu into the larger tegra241_cmdqv, which frees the original @smmu once it relocates. A failure after that returned NULL, and the caller then dereferenced the freed @smmu on its fallback path. Return an int and take @smmu by reference instead, then update *smmu to the reallocated pointer after devm_krealloc() succeeds, so the caller and its fallback path both use the live @smmu rather than the freed original.

iommu/tegra241-cmdqv: Free the error IRQ before tearing down VINTFs

In the Linux kernel, the following vulnerability has been resolved: iommu/tegra241-cmdqv: Free the error IRQ before tearing down VINTFs tegra241_cmdqv_remove() tears each VINTF down first, then calls free_irq(). Tearing a VINTF down frees vintf0 and clears cmdqv->vintfs[0]. An error in that window makes tegra241_cmdqv_isr() read the stale slot and hand it to tegra241_vintf0_handle_error(), which dereferences a NULL or freed pointer. Free the IRQ before tearing the VINTFs down. free_irq() waits for in-flight handlers to finish and blocks new ones, so no ISR can observe a VINTF as it is torn down. Note: a user-owned VINTF (viommu) could out

• Обновитесь до 6.12.111-1

iommu/tegra241-cmdqv: Fix VINTF0 leak on the init-failure path

In the Linux kernel, the following vulnerability has been resolved: iommu/tegra241-cmdqv: Fix VINTF0 leak on the init-failure path tegra241_cmdqv_init_structures() allocates VINTF0 with kzalloc_obj(), inits it, and preallocates its logical VCMDQs. Two of its error paths leak. When tegra241_cmdqv_init_vintf() fails it returns before VINTF0 reaches the cmdqv->vintfs[] array, so the devres unwind on probe failure cannot reach it; free it directly there. A later VCMDQ preallocation failure instead leaves VINTF0 published, and so this time the unwind does reach tegra241_cmdqv_remove_vintf(), which then frees it from vintf->hyp_own. But tegra24

clk: mediatek: pllfh: Fix IO remapping leak in register_pllfhs error path

In the Linux kernel, the following vulnerability has been resolved: clk: mediatek: pllfh: Fix IO remapping leak in register_pllfhs error path When mtk_clk_register_pllfhs function fails to register a PLL, it unregisters all PLLs and cleans up itself in its error path before returning, so the function callers don't need to do it. But contrary to mtk_clk_unregister_pllfhs function, that does almost the same sequence, it does not free the IO memory mapped on fhctl node, leading to a leak. Fix this leak by factorizing the cleanup sequence in a new private function and use it both mtk_clk_register_pllfhs and mtk_clk_unregister_pllfhs functions

PCI: Fix UAF when probe runs concurrent to dyn ID removal

In the Linux kernel, the following vulnerability has been resolved: PCI: Fix UAF when probe runs concurrent to dyn ID removal Dynamic IDs are only guaranteed to be valid when dynids.lock is held, as remove_id_store() can free the node. Thus, make a copy in pci_match_device(). Also, clarify that the id parameter is only valid during probe.

nilfs2: fix infinite loop in nilfs_clean_segments()

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix infinite loop in nilfs_clean_segments() syzbot reported a hung task in nilfs_transaction_begin(). This occurs because the cleaner ioctl falls into an infinite loop if nilfs_segctor_construct() repeatedly returns -EROFS (e.g. the device is remounted as read-only after an I/O error). Currently in nilfs_clean_segments(), if err is non-zero, it logs the error and sleeps but doesn't abort when it encounters a terminal error like -EROFS. This causes the thread to loop forever. Fix this by breaking out of the loop if nilfs_segctor_construct() returns -EROFS. This mat

• Обновитесь до 6.12.111-1

nilfs2: prevent out-of-bounds read in super root block parsing

In the Linux kernel, the following vulnerability has been resolved: nilfs2: prevent out-of-bounds read in super root block parsing super-root inode metadata size is trusted before nilfs_read_inode_common(). Reject super-root inode sizes whose computed on-disk footprint exceeds the filesystem block size. This prevents malformed filesystem images from making nilfs_read_inode_common() read past the end of the super-root block. [ryusuke: clarify the commit title]

• Обновитесь до 6.12.111-1