Уязвимости linux · Страница 82

RDMA/siw: Fix use-after-free in siw_accept()

In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Fix use-after-free in siw_accept() siw_accept() looks up the QP supplied by userspace. If that QP is already in RTS, the function jumps to error cleanup before associating the incoming CEP with it. The cleanup tests whether qp->cep is non-NULL and assumes the current call installed the association. However, qp->cep can point to the CEP of an existing connection. The cleanup then drops a reference from the incoming cep, not qp->cep. Once the incoming endpoint loses its remaining references, this can free it before the subsequent cep->qp store, causing a use-after-

• Обновитесь до 6.12.111-1

module/dups: Fix use-after-free in kmod_dup_req lifetime handling

In the Linux kernel, the following vulnerability has been resolved: module/dups: Fix use-after-free in kmod_dup_req lifetime handling The kmod dups code uses RCU to ensure that a kmod_dup_req instance is freed only after it is no longer referenced. When releasing an instance, the kmod_dup_request_delete() function removes the kmod_dup_req from the dup_kmod_reqs list, waits via synchronize_rcu() and finally frees it. However, this doesn't work correctly because parallel users referencing the instance in kmod_dup_request_exists_wait() don't enter an RCU read-side critical section. This can result in a use-after-free. The kmod_dup_request_exi

• Обновитесь до 6.12.111-1

arm64: hibernate: Restore DAIF state on error

In the Linux kernel, the following vulnerability has been resolved: arm64: hibernate: Restore DAIF state on error Sashiko AI has reported that if swsusp_mte_save_tags() for some reason fails we return from swsusp_arch_suspend() with DAIF being masked - that is not what we'd expect. Restore the saved DAIF state before returning from the error path.

• Обновитесь до 6.12.111-1

drm/amd/display: Resize MST HDCP per-connector arrays to 32

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Resize MST HDCP per-connector arrays to 32 AMDGPU_DM_MAX_DISPLAY_INDEX is 31. It suggest a maximum number of 32 connectors. But the way it's used is like MAX_DISPLAY_COUNT. Hence we're off by one with DRM core, which supports a max of 32 connectors. Rename AMDGPU_DM_MAX_DISPLAY_INDEX to AMDGPU_DM_MAX_DISPLAY_COUNT to match its actual use, and increase the size to 32 to match the originally intended size.

phy: sunplus: fix error handling in sp_uphy_init()

In the Linux kernel, the following vulnerability has been resolved: phy: sunplus: fix error handling in sp_uphy_init() Fix the error paths of sp_uphy_init() to undo exactly what each stage did: return directly if clk_prepare_enable() fails, release only the clock if reset_control_deassert() fails, and jump to err_reset if update_disc_vol() fails so the clock and reset are not leaked.

• Обновитесь до 6.12.111-1

drm/amdgpu/gfx6: Use PFP on the compute queues too

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/gfx6: Use PFP on the compute queues too On GFX6, the compute rings use the same CP path as the graphics ring. The only difference is that they don't support draw commands. (As opposed to GFX7 and newer which have a separate command parser that is called MEC for compute queues.) This means that we have to take into consideration that the PFP also exists on compute queues on GFX6: Use PFP for register writes on both graphics and compute queues. In the pipeline sync, use the PFP to wait for the previous fence (and not the ME) to prevent the PFP from starting to e

• Обновитесь до 6.12.111-1

scsi: qla2xxx: Remove redundant VPD flash read in sysfs read path

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Remove redundant VPD flash read in sysfs read path qla2x00_sysfs_read_vpd() called ha->isp_ops->read_optrom() a second time after releasing optrom_mutex. The repeated read is redundant and, unlike the first, runs without optrom_mutex held, exposing flash access to concurrent optrom operations. Drop the duplicate call.

• Обновитесь до 6.12.111-1

firmware_loader: do not queue completed sysfs fallback requests

In the Linux kernel, the following vulnerability has been resolved: firmware_loader: do not queue completed sysfs fallback requests fw_load_sysfs_fallback() calls device_add() before adding the fw_priv to pending_fw_head. device_add() publishes the fallback loading interface, so a userspace helper which discovers the device by scanning sysfs can write 0 to the loading attribute and complete the request before it is queued as pending. In that interleaving firmware_loading_store() calls fw_state_done() while pending_list still points to itself, so it cannot remove an entry from pending_fw_head. The subsequent unconditional list_add() then qu

• Обновитесь до 6.12.111-1

hugetlbfs: release subpool on fill_super failure

In the Linux kernel, the following vulnerability has been resolved: hugetlbfs: release subpool on fill_super failure hugetlbfs_fill_super() allocates a hugepage subpool when size or min_size mount options are specified. hugepage_new_subpool() may also reserve huge pages for min_size. If root dentry creation fails after the subpool is created, the failure path frees the subpool with kfree(). This bypasses hugepage_put_subpool() and can leave min_size reservations charged. Use hugepage_put_subpool() on the failure path, matching the normal put_super path.

• Обновитесь до 6.12.111-1

phy: qcom: qmp-usb-legacy: Fix possible NULL-deref on early runtime suspend

In the Linux kernel, the following vulnerability has been resolved: phy: qcom: qmp-usb-legacy: Fix possible NULL-deref on early runtime suspend There is a small window where the runtime suspend callback may run after pm_runtime_enable() and before pm_runtime_forbid(). In this case, a crash occurs because runtime suspend/resume dereferences qmp->phy pointer, which is not yet initialized: `if (!qmp->phy->init_count) {` This can also happen if user re-enables runtime-pm via the sysfs attribute before qmp phy is initialized. Similarly to other qcom phy drivers, introduce a qmp->phy_initialized variable that can be used to avoid relyin

• Обновитесь до 6.12.111-1

phy: qcom: snps-femto-v2: Fix possible NULL-deref on early runtime suspend

In the Linux kernel, the following vulnerability has been resolved: phy: qcom: snps-femto-v2: Fix possible NULL-deref on early runtime suspend Runtime PM must be enabled before creating the PHY, since phy_create() only enables runtime PM on the PHY device if it is already enabled on this parent device. However, the runtime PM callbacks dereference the hsphy instance, which is not yet ready, leaving a window where a suspend callback may trigger a NULL pointer dereference. Take a runtime PM usage reference with pm_runtime_get_noresume() before enabling runtime PM and release it once the PHY has been created, so that no runtime suspend can ru

• Обновитесь до 6.12.111-1

phy: qcom: qmp-usb: Fix possible NULL-deref on early runtime suspend

In the Linux kernel, the following vulnerability has been resolved: phy: qcom: qmp-usb: Fix possible NULL-deref on early runtime suspend There is a small window where the runtime suspend callback may run after pm_runtime_enable() and before pm_runtime_forbid(). In this case, a crash occurs because runtime suspend/resume dereferences qmp->phy pointer, which is not yet initialized: `if (!qmp->phy->init_count) {` This can also happen if user re-enables runtime-pm via the sysfs attribute before qmp phy is initialized. Similarly to other qcom phy drivers, introduce a qmp->phy_initialized variable that can be used to avoid relying on th

• Обновитесь до 6.12.111-1

md/raid5: round bitmap stripes with sector division

In the Linux kernel, the following vulnerability has been resolved: md/raid5: round bitmap stripes with sector division raid5_bitmap_sector_map() aligns the array range to full RAID5 stripe widths before converting it to component sectors. That width is chunk_sectors multiplied by the number of data disks, and it is not always a power of two. Reproduce with a 4-disk RAID5, 1024-sector chunks, and three data disks. The full-stripe width is 3072 sectors. For a one-sector write at array sector 3072, correct rounding gives array range [3072, 6144), which maps to component range [1024, 2048). The old round_down()/round_up() logic instead gives

• Обновитесь до 6.12.111-1

md/raid1: don't set array_frozen in raid1_takeover()

In the Linux kernel, the following vulnerability has been resolved: md/raid1: don't set array_frozen in raid1_takeover() raid1_takeover() sets conf->array_frozen = 1 on the newly-allocated r1conf and nothing ever clears it, so every I/O to the array stalls permanently once _wait_barrier() sees it stuck at 1. This used to be harmless: level_store() called mddev_resume() right after pers->run(), which called raid1_quiesce(mddev, 0) and cleared array_frozen back to 0 regardless of what raid1_takeover() set. Commit b39f35ebe86d ("md: don't quiesce in mddev_suspend()") removed that quiesce(mddev, 0) call, so the pre-set now sticks. setup_conf(

• Обновитесь до 6.12.111-1

coresight: etm4x: fix underflow for usage of (nrseqstate - 1)

In the Linux kernel, the following vulnerability has been resolved: coresight: etm4x: fix underflow for usage of (nrseqstate - 1) According to IHI006H Embedded Trace Macrocell Architecture Specification[0], TRCSEQEVR<n> is implemented only when TRCIDR5.NUMSEQSTATE is 0b100, in which case n ranges from 0 to 2; otherwise, TRCIDR5.NUMSEQSTATE is 0b000. IOW, the number of usage in the initialisation or setting TRCSEQEVR<n> with drvdata->nrseqstate - 1 in the loop could make underflow issue when TRCIDR5.NUMSEQSTATE is 0b000. Therefore, introduce nr_seq_ctrls field and untie it from nrseqstate. As part of this introduce ETM_MAX_SEQ_TRANSITIONS

• Обновитесь до 6.12.111-1

coresight: etm4x: missing cscfg_csdev_disable_active_config() in perf enable

In the Linux kernel, the following vulnerability has been resolved: coresight: etm4x: missing cscfg_csdev_disable_active_config() in perf enable In the perf enable path, there are missing cases where cscfg_csdev_disable_active_config() is not called: - Branch broadcast is selected but not supported by the hardware - etm4_enable_hw() fails This can lead to a leak of config_desc->active_cnt. Fix this by properly calling cscfg_csdev_disable_active_config() in these error paths.

scsi: sd: Fix special_vec mempool leak when scsi_alloc_sgtables() fails

In the Linux kernel, the following vulnerability has been resolved: scsi: sd: Fix special_vec mempool leak when scsi_alloc_sgtables() fails sd_set_special_bvec() allocates a special payload page for UNMAP and WRITE SAME commands. If scsi_alloc_sgtables() fails afterward in sd_setup_unmap_cmnd() or sd_setup_write_same{10,16}_cmnd(), the SCSI midlayer does not call uninit_command() because RQF_DONTPREP is not set yet, leaking the page. Call sd_uninit_command() on error, and clear RQF_SPECIAL_PAYLOAD after freeing the page.

btrfs: defrag: fix deadlock between defrag and delalloc space reservation

In the Linux kernel, the following vulnerability has been resolved: btrfs: defrag: fix deadlock between defrag and delalloc space reservation While running fsstress with autodefrag and flushoncommit, hit a deadlock due to the fact that defrag reserves delalloc space while it's holding dirty and locked folios, besides the extent range lock. The stack traces are the following: [958.624] task:kworker/u50:3 state:D stack:0 pid:20365 tgid:20365 ppid:2 task_flags:0x4208060 flags:0x00080000 [958.626] Workqueue: events_unbound btrfs_async_reclaim_metadata_space [btrfs] [958.627] Call Trace: [958.628] <TASK> [958.628] __

btrfs: always wait for ordered extents to avoid OE races

In the Linux kernel, the following vulnerability has been resolved: btrfs: always wait for ordered extents to avoid OE races [BUG] Syzbot reported a bug that there can be conflicting OEs for the same range: BTRFS critical (device loop4): panic in insert_ordered_extent:264: overlapping ordered extents, existing oe file_offset 16384 num_bytes 430080 flags 0x1089, new oe file_offset 16384 num_bytes 430080 flags 0x80 (errno=-17 Object alrea[ 179.162726][ T6897] BTRFS critical (device loop4): panic in insert_ordered_extent:264: overlapping ordered extents, existing oe file_offset 16384 num_bytes 430080 flags 0x1089, new oe file_offset 16384

btrfs: check if root is readonly when setting posix acl

In the Linux kernel, the following vulnerability has been resolved: btrfs: check if root is readonly when setting posix acl For a filesystem which has btrfs read-only property set to true, all write operations including acl and xattr should be denied. However, acl can still be set even if btrfs ro property is true. This happens because no function on the set_acl code path checks the root is readonly or not. It was checked in btrfs_setxattr_trans() but got removed in commit 353c2ea735e4 ("btrfs: remove redundant readonly root check in btrfs_setxattr_trans") That commit didn't check if all the callers properly check the root's read-only fla