Уязвимости linux · Страница 88

ipvs: fix integer overflow in ftp helper port/address parsing

In the Linux kernel, the following vulnerability has been resolved: ipvs: fix integer overflow in ftp helper port/address parsing ip_vs_ftp_get_addrport() accumulates decimal digits into a __u16 (hport) and into unsigned char (p[]) without checking for overflow. A crafted FTP PASV/EPSV response with an over-long port or address octet wraps the value, so the helper configures the data connection with a truncated port/address. The netfilter conntrack FTP helper had the same defect, fixed in commit 2b413fc689ba ("netfilter: nf_conntrack_ftp: avoid u16 overflows"). Apply the equivalent fix here: widen the port accumulator to u32 and reject val

• Обновитесь до 6.12.111-1

cuse: wait for pending RCU callbacks on module exit

In the Linux kernel, the following vulnerability has been resolved: cuse: wait for pending RCU callbacks on module exit Since commit 053fc4f755ad ("fuse: fix UAF in rcu pathwalks"), fuse_conn_put() frees the fuse_conn through call_rcu() rather than synchronously. For cuse, fc->release is cuse_fc_release(), which lives in the cuse module. If the module is removed before the RCU grace period ends, the callback jumps into freed module memory: userspace / module unload | RCU softirq ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ close(/dev/cuse) | cuse_channel_release()

• Обновитесь до 6.12.111-1

fuse: check for NULL root inode in fuse_fill_super_submount

In the Linux kernel, the following vulnerability has been resolved: fuse: check for NULL root inode in fuse_fill_super_submount fuse_iget() can return NULL when its inode allocation fails, but fuse_fill_super_submount() passed the result straight to get_fuse_inode() and decremented fi->nlookup without checking it: root = fuse_iget(sb, parent_fi->nodeid, ...); fi = get_fuse_inode(root); fi->nlookup--; Inside fuse_iget() the inode allocation can fail and return NULL. The submount root takes the iget5_locked() path, whose alloc_inode() can fail under memory pressure (the auto-submount branch can fail the same way in

• Обновитесь до 6.12.111-1

vsock: don't check the listener's sk_err in vsock_accept()

In the Linux kernel, the following vulnerability has been resolved: vsock: don't check the listener's sk_err in vsock_accept() Syzbot reported an issue which can be reproduced with these steps: r0 = socket(AF_VSOCK, SOCK_STREAM, 0) bind(r0, {VMADDR_CID_ANY, PORT}) connect(r0, {VMADDR_CID_LOCAL, PORT}) -> -1, EPROTO (self-connect) listen(r0, backlog) -> 0 r1 = socket(AF_VSOCK, SOCK_STREAM, 0) connect(r1, {VMADDR_CID_LOCAL, PORT}) -> 0 accept(r0) -> -1, EPROTO (stale sk_err) Basically, it creates a socket (r0) and triggers a self-connect after binding it. This self-connect fails with EPROTO

• Обновитесь до 6.12.111-1

platform/x86: hp-bioscfg: fix password encoding bounds check

In the Linux kernel, the following vulnerability has been resolved: platform/x86: hp-bioscfg: fix password encoding bounds check The password PSWD_ENCODINGS parser reads password_obj[elem + pos_values] while copying the supported password encodings from the ACPI package. The outer loop only guarantees that elem is within password_obj_count. The encoding count is bounded by MAX_ENCODINGS_SIZE, but that does not guarantee that the ACPI package contains enough entries for all elem + pos_values accesses. A malformed package can therefore declare a non-zero encoding count without providing enough string objects, causing the parser to read past

• Обновитесь до 6.12.111-1

net: add missing ref_tracker_dir_exit() to alloc_netdev_mqs()

In the Linux kernel, the following vulnerability has been resolved: net: add missing ref_tracker_dir_exit() to alloc_netdev_mqs() sashiko is reporting that trying to read /sys/kernel/debug/ref_tracker/* causes use-afer-free crash when either alloc_percpu() or dev_addr_init() in alloc_netdev_mqs() failed, for commit 4d92b95ff2f9 ("net: add net device refcount tracker infrastructure") added ref_tracker_dir_exit() to only free_netdev() path.

• Обновитесь до 6.12.111-1

vdpa_sim: fix cleanup after worker creation failure

In the Linux kernel, the following vulnerability has been resolved: vdpa_sim: fix cleanup after worker creation failure vdpasim_create() leaves vdpasim->worker as an ERR_PTR when kthread_run_worker() fails. The error path then drops the device reference, which releases the partially initialized simulator. vdpasim_free() unconditionally passes the worker pointer to kthread_destroy_worker(), so the ERR_PTR is dereferenced and can trigger a general protection fault. Store the worker error, clear the pointer, and only clean up the worker when it was successfully initialized. Also make the release path tolerate partially initialized objects by

• Обновитесь до 6.12.111-1

vdpa/mlx5: fix wrong list iterated in add_direct_chain error path

In the Linux kernel, the following vulnerability has been resolved: vdpa/mlx5: fix wrong list iterated in add_direct_chain error path In add_direct_chain(), newly allocated direct MR entries are added to the local list 'tmp', which is spliced into mr->head only on success. On the error path, the cleanup loop was incorrectly iterating over mr->head instead of tmp. Fix by iterating over 'tmp' in the err_alloc cleanup path.

• Обновитесь до 6.12.111-1

rtc: pcf8563: fix clock provider leak on unbind

In the Linux kernel, the following vulnerability has been resolved: rtc: pcf8563: fix clock provider leak on unbind pcf8563_clkout_register_clk() registers the CLKOUT clock provider with of_clk_add_provider(), but nothing ever unwinds it: there is no of_clk_del_provider() call and the driver has no remove callback. Each of_clk_add_provider() allocates a struct of_clk_provider, takes a reference on the OF node and adds an entry to the global of_clk_providers list, none of which is released when the device is unbound. Every bind/unbind (or module reload) therefore leaks a provider structure and an of_node reference. The clock itself is alrea

• Обновитесь до 6.12.111-1

smb: client: fix request buffer leak in smb2_new_read_req()

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix request buffer leak in smb2_new_read_req() smb2_new_read_req() allocates the request buffer with smb2_plain_req_init() but only publishes it to the caller with *buf = req at the very end of the function. Two error returns sit in between: rc = smb2_plain_req_init(SMB2_READ, io_parms->tcon, server, (void **) &req, total_len); if (rc) return rc; if (server == NULL) return -ECONNABORTED; [...] rdata->mr = smbd_register_mr(server->smbd_conn, &rdata->subreq.io_iter, true, need_invalidate); if (!rdata->mr) return -EAGAIN;

• Обновитесь до 6.12.111-1

irqchip/renesas-rzg2l: Fix loss of interrupt

In the Linux kernel, the following vulnerability has been resolved: irqchip/renesas-rzg2l: Fix loss of interrupt rzg2l_clear_irq_int() and rzg2l_clear_tint_int() perform a read-modify-write on the ISCR/TSCR status registers to clear the bit for the interrupt just handled. Since these registers are write-0-to-clear per bit, this is racy: If another interrupt's status bit gets set between the read and the write, that bit is written back as 0 by the software-constructed value, clearing an interrupt that hasn't been serviced yet and losing it. This can be reproduced by triggering multiple interrupts at once, e.g.: gpioset -c gpiochip0 355=

• Обновитесь до 6.12.111-1

clk: visconti: Make sure clk_init_data is fully initialized

In the Linux kernel, the following vulnerability has been resolved: clk: visconti: Make sure clk_init_data is fully initialized The clk_init_data structure contains several mutually-exclusive members for different methods to specify the possible parents of a clock, prompting drivers to initialize only the members they need. However, not initializing all members may cause subtle issues, which are only exposed when CONFIG_INIT_STACK_ALL_PATTERN or CONFIG_INIT_STACK_NONE is enabled. visconti_clk_register_gate() fills in init.parent_data, and assumes that init.parent_names is NULL. However, the latter in uninitialized, and thus may cause a c

• Обновитесь до 6.12.111-1

ALSA: ice1712: Fix the card leak at probe error with the auto-cleanup

In the Linux kernel, the following vulnerability has been resolved: ALSA: ice1712: Fix the card leak at probe error with the auto-cleanup snd_ice1712_probe() performs multiple initialization steps after snd_card_new(), but directly returns on failures from later steps without releasing the ALSA card, causing resource leaks when probing fails. Use snd_devm_card_new() together with scope-based cleanup via __free(snd_card_unref), and clear the card pointer after successful registration to keep it alive.

• Обновитесь до 6.12.111-1

ALSA: mtpav: shut down output timer before card teardown

In the Linux kernel, the following vulnerability has been resolved: ALSA: mtpav: shut down output timer before card teardown snd_mtpav_output_timer() rearms chip->timer while holding chip->spinlock and accesses the card-private mtpav state. snd_mtpav_free() currently takes the same lock and calls timer_delete() when the timer is active. This only removes a pending timer; it does not wait for a callback that is already running and does not prevent the callback from rearming the timer. A callback running on another CPU can therefore continue after snd_mtpav_free() releases the lock and access the card-private state while the card is being t

xsk: fix NULL pointer dereference in __xsk_rcv()

In the Linux kernel, the following vulnerability has been resolved: xsk: fix NULL pointer dereference in __xsk_rcv() In the __xsk_rcv() multi-buffer path, xsk_buff_alloc() is called in a loop without checking its return value. xsk_buff_can_alloc() only counts fill queue entries without validating their addresses, so it can succeed while xsk_buff_alloc() rejects all remaining entries and returns NULL. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000 KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:__xsk_rcv+0x426/0xc20 (net/xdp/xsk.c:350) Call Trace: xsk_g

• Обновитесь до 6.12.111-1

net: bridge: Reject descending VLAN tunnel ranges

In the Linux kernel, the following vulnerability has been resolved: net: bridge: Reject descending VLAN tunnel ranges A pair of descending VLAN and tunnel IDs can pass the tunnel range span check. The VLAN subtraction produces a negative int, which is converted to unsigned when compared with the u32 tunnel ID subtraction. It can therefore equal the wrapped tunnel ID delta. The range loop then performs no iterations. Since the batched notification handling added a post-loop error check, this leaves err uninitialized and makes the request's return value unpredictable. Reject descending VLAN ranges before comparing the spans. Valid ascending

• Обновитесь до 6.12.111-1

net: qlcnic: validate unified ROM sections before loading

In the Linux kernel, the following vulnerability has been resolved: net: qlcnic: validate unified ROM sections before loading The unified ROM parser reads directory, product, and data-descriptor fields from the firmware file. Existing validation forms table and data ends with unchecked additions and multiplications. Malformed values can wrap before they are compared with the firmware size. The parser also dereferences typed pointers at firmware-controlled offsets. Valid descriptor extents alone are insufficient for the consumers. The loader reads a fixed-size bootloader regardless of its declared size, the version parser assumes a 17-b

• Обновитесь до 6.12.111-1

ip6mr: do not clone dst in ip6mr_cache_report()

In the Linux kernel, the following vulnerability has been resolved: ip6mr: do not clone dst in ip6mr_cache_report() IPv6 input attaches a non-refcounted (NOREF) dst to skbs under RCU. When an ingress multicast packet misses MFC lookup, ip6mr_cache_unresolved() places the skb onto the unresolved queue, escaping the receive-side RCU grace period. If the underlying route is deleted and freed, and the MFC queue is later resolved with a wrong parent interface, ip6_mr_forward() invokes ip6mr_cache_report(..., MRT6MSG_WRONGMIF), which executes dst_clone(skb_dst(pkt)) on the freed dst entry, triggering a slab use-after-free. Report packets queued

inetpeer: randomize RB-tree node comparison using SipHash

In the Linux kernel, the following vulnerability has been resolved: inetpeer: randomize RB-tree node comparison using SipHash The inetpeer rate limiting system stores peer entries in a Red-Black tree keyed deterministically on the remote IP address. Because tree lookups walk the RB-tree using standard lexicographical comparisons (inetpeer_addr_cmp), an off-path adversary can predict the exact topology of the tree and the sequence of nodes traversed during lookups (the gc_stack candidate list). By combining deterministic tree traversal with aggressive garbage collection (triggered when tree size exceeds inet_peer_threshold), an attacker can

• Обновитесь до 6.12.111-1

net: sched: fix 32-bit backlog wrap in gred, bfifo and plug enqueue

In the Linux kernel, the following vulnerability has been resolved: net: sched: fix 32-bit backlog wrap in gred, bfifo and plug enqueue gred_enqueue(), bfifo_enqueue() and plug_enqueue() admit a packet when the current backlog plus the packet length fits within the queue limit: sch->qstats.backlog + qdisc_pkt_len(skb) <= sch->limit (gred default VQ) gred_backlog+qdisc_pkt_len(skb) <= q->limit (gred configured VQ) sch->qstats.backlog + qdisc_pkt_len(skb) <= sch->limit (bfifo) sch->qstats.backlog + skb->len <= q->limit (plug) sch->qstats.backlog and q->backlog are u32, and qdisc_pkt_len()/skb->len are unsigned int, so a

• Обновитесь до 6.12.111-1