drm/xe: harden adjust_idledly() against divide-by-zero and overflow
In the Linux kernel, the following vulnerability has been resolved:
drm/xe: harden adjust_idledly() against divide-by-zero and overflow
adjust_idledly() has several corner-case issues flagged during review:
1. If xe_gt_clock_init() failed to recognise the crystal clock,
gt->info.timestamp_base is 0, which makes idledly_units_ps also 0.
The subsequent DIV_ROUND_CLOSEST(..., idledly_units_ps) is then a
divide-by-zero and panics the kernel.
2. The tick-to-ns conversions are done in u32:
idledly * idledly_units_ps, (maxcnt - 1) * 1000
Both overflow u32 before DIV_ROUND_CLOSEST() sees them.
3. If IDLE_WAIT_TI
mm/damon/ops-common: use a page-aligned address in damon_ptep_mkold()
In the Linux kernel, the following vulnerability has been resolved:
mm/damon/ops-common: use a page-aligned address in damon_ptep_mkold()
__damon_va_prepare_access_check() picks a random byte address within the
region and stores it in r->sampling_addr. damon_va_mkold() passes it into
a page table walk, which hands it to damon_ptep_mkold() as the address of
the page to sample:
damon_va_mkold(mm, r->sampling_addr)
damon_va_walk_page_range(mm, addr, addr + 1)
damon_mkold_pmd_entry()
damon_ptep_mkold(pte, vma, addr)
ptep_test_and_clear_young(vma, addr, pte)
mmu_notifier_clear_young(mm, addr, addr + PAGE
In the Linux kernel, the following vulnerability has been resolved:
parisc: Increase kernel stack size to 32kb
For 64-bit Linux kernels, increase the default kernel stack size
(THREAD_SIZE_ORDER) to 32 kB, in order to avoid kernel crashes which have been
triggered recently when building the debian vtk9 package with gcc 17:
stackcheck: kworker/u128:0 will most likely overflow kernel stack (sp:179a83af0, stk bottom-top:179a80000-179a84000)
Kernel panic - not syncing: low stack detected by irq handler - check messages
CPU: 2 UID: 0 PID: 30760 Comm: kworker/u128:0 Tainted: G W 6.18.46-dirty #1 NONE
Tainted: [W]=WARN
Hardware name: 9000/800/rp3
wifi: nl80211: check link is beaconing for color change
In the Linux kernel, the following vulnerability has been resolved:
wifi: nl80211: check link is beaconing for color change
When trying to do a color change, validate that the link is
beaconing first, to avoid calling the driver with an invalid
link.
media: video-i2c: use vb2_video_unregister_device on driver removal
In the Linux kernel, the following vulnerability has been resolved:
media: video-i2c: use vb2_video_unregister_device on driver removal
The driver uses vb2_fop_release() as its file release operation, so
vb2_video_unregister_device() should be used instead of
video_unregister_device() during driver removal.
This ensures that the vb2 queue is properly disconnected before the
video device is unregistered.
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: cap ATOM command table nesting depth
Cap nesting at 32 levels with execute_depth and
return -ELOOP when exceeded.
net: thunderx: fix PTP device ref leak in nicvf_probe()
In the Linux kernel, the following vulnerability has been resolved:
net: thunderx: fix PTP device ref leak in nicvf_probe()
cavium_ptp_get() acquires a reference to the PTP PCI device
through pci_get_device(). If any initialization step fails
after cavium_ptp_get(), the PTP PCI device reference is leaked.
Add a common error path to release the PTP reference before
returning from probe failures.
ALSA: seq: oss: Reject reads that cannot fit the next event
In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: oss: Reject reads that cannot fit the next event
snd_seq_oss_read() checks whether the next queued OSS sequencer event
fits in the remaining userspace buffer before removing it from the read
queue.
The check is inverted. It currently stops when the event is smaller than
the remaining buffer, so a normal 4-byte event is not copied for an
8-byte read buffer. Conversely, an 8-byte event can be copied for a
smaller read count.
Break only when the remaining userspace buffer is smaller than the next
event, and report -EINVAL if no complete event has been copied. This
dpaa2-switch: fix the error path in dpaa2_switch_rx()
In the Linux kernel, the following vulnerability has been resolved:
dpaa2-switch: fix the error path in dpaa2_switch_rx()
In case of an error in dpaa2_switch_rx(), the dpaa2_switch_free_fd()
function is called in order to free the FD. This is incorrect since the
dpaa2_switch_free_fd() is intended to be used on Tx frame descriptors,
meaning that it expects in the software annotation area of the FD data
to find a valid skb pointer on which to call dev_kfree_skb().
Fix this by extracting the dma_unmap_page() from
dpaa2_switch_build_linear_skb() directly into the dpaa2_switch_rx()
function. This allows us to directly use free_pages() in case o
drm/amdkfd: Unwind debug trap enable on copy_to_user failure
In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Unwind debug trap enable on copy_to_user failure
If kfd_dbg_trap_enable() fails while copying runtime_info to userspace,
it had already activated the trap, set debug_trap_enabled, taken an extra
process reference, and opened the debug event file. Return -EFAULT without
unwinding that state, leaving inconsistent trap state and a refcount
imbalance that could break later DISABLE/ENABLE.
On copy_to_user failure, deactivate the trap and undo the rest of the
enable setup before returning.
net: cpsw_new: unregister devlink on port registration failure
In the Linux kernel, the following vulnerability has been resolved:
net: cpsw_new: unregister devlink on port registration failure
cpsw_probe() registers devlink before registering the CPSW ports.
If cpsw_register_ports() fails, the error path only unregisters the
notifiers and then releases the lower level resources. It does not undo
the successful cpsw_register_devlink() call, leaving the devlink instance
and its parameters registered after probe has failed.
Add a devlink cleanup label for the path where devlink registration has
already succeeded, and use it when port registration fails.
net: microchip: sparx5: clean up PSFP resources on flower setup failure
In the Linux kernel, the following vulnerability has been resolved:
net: microchip: sparx5: clean up PSFP resources on flower setup failure
sparx5_tc_flower_psfp_setup() allocates PSFP stream gate, flow meter and
stream filter resources before adding VCAP actions. If a later step
fails, the resources allocated earlier in the function are not unwound.
Add error paths to release the stream filter, flow meter and stream gate
when setup fails after they have been acquired.
Also make sparx5_psfp_fm_add() return the acquired flow-meter id before
the existing-flow-meter early return. When an existing flow meter is
reused, sparx5_psfp_fm_get() in
btrfs: protect sb_write_pointer() with invalidate lock
In the Linux kernel, the following vulnerability has been resolved:
btrfs: protect sb_write_pointer() with invalidate lock
sb_write_pointer() reads the super block from the block device page cache
using read_cache_page_gfp(). This has the same race with BLKBSZSET as the
one fixed by commit 3f29d661e568 ("btrfs: sync read disk super and set
block size").
Take the mapping invalidate lock around read_cache_page_gfp() to
serialize the read against block size changes.
In the Linux kernel, the following vulnerability has been resolved:
net: lan966x: restore RX state on reload failure
lan966x_fdma_reload() backs up rx->page_pool and rx->fdma before
reallocating the RX resources for the new MTU. If the allocation fails,
the restore path puts these fields back before restarting RX.
However, the reload path also updates rx->page_order and rx->max_mtu
before calling lan966x_fdma_rx_alloc(). These fields are not restored on
failure, so RX can be restarted with the old pages, old FDMA state and
old page pool, but with the page geometry from the failed new MTU.
This can make the XDP path advertise a frame size
drm/amdkfd: Properly acquire queue buffers in CRIU restore
In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Properly acquire queue buffers in CRIU restore
When kfd_queue_acquire_buffers() was split off from
set_queue_properties_from_user(), set_queue_properties_from_criu()
was missed. Thus, set_queue_properties_from_criu() is not
filling out the buffer fields of queue_properties, which
can come up when subsequent code expects them to be non-null.
Add the proper call to kfd_queue_acquire_buffers(), and also
use the right cast types in set_queue_properties_from_criu()
(which were missed at the same time)
(cherry picked from commit 88ed96abbbe27b70193544fbc1ee06448c274
In the Linux kernel, the following vulnerability has been resolved:
mailbox: imx: Use devm_pm_runtime_enable()
sashiko complained about early usage of the device while probe isn't
completed. This can be mitigated by delaying the pm_runtime_enable()
into the removal path instead doing it early. This ensures that in an
error case the device is removed (and imx_mu_shutdown()) before
pm_runtime_disable() so we don't have to do this manually.
For the order to work, lets move devm_mbox_controller_register() until
after the pm-runtime part. So the reverse order will be mbox-controller
removal followed by disabling pm runtime.
Use devm_pm_runtime
In the Linux kernel, the following vulnerability has been resolved:
mailbox: imx: Add a channel shutdown field
sashiko complained about possible teardown problem. The scenario
CPU 0 CPU 1
imx_mu_isr() imx_mu_shutdown()
imx_mu_xcr_rmw(priv, IMX_MU_RCR, 0, IMX_MU_xCR_RIEn(priv->dcfg->type, cp->idx));
imx_mu_specific_rx()
imx_mu_xcr_rmw(priv, IMX_MU_RCR, IMX_MU_xCR_RIEn(priv->dcfg->type, 0), 0);
free_irq()
The RX event remains enabled because in this short window the RX event
was disabled in ->shutdown() while the
md/raid5: let stripe batch bm_seq comparison wrap-safe
In the Linux kernel, the following vulnerability has been resolved:
md/raid5: let stripe batch bm_seq comparison wrap-safe
Once the 32-bit seq wraps, a newer bm_seq can look smaller
than old, so .. covert to wrap-safe calculate way.
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix lease break and ack state handling
Do not skip valid lease states containing WRITE_CACHING when breaking
level-II/read leases for writes and truncates.
Handle lease break acknowledgments according to the SMB2 rule that the
acknowledged state must be a subset of the server's break target. Apply
the acknowledged state directly and keep the break pending on failed ACKs.
xen/gntalloc: validate grant count before allocation
In the Linux kernel, the following vulnerability has been resolved:
xen/gntalloc: validate grant count before allocation
gntalloc_ioctl_alloc() allocates the grant-id array before checking
whether the requested count fits within the global grant limit. Counts
above that limit cannot succeed, so reject them before the
user-controlled allocation reaches kcalloc().
Use a subtraction-based check while holding gref_mutex so adding the
requested count cannot wrap. Also cast the count before advancing the
per-file index so the page-size multiplication is performed in 64-bit
arithmetic.