Свежие уязвимости · Страница 2

MariaDB Connector/J: Server could switch character_set_results away from UTF-8 without the client noticing

MariaDB Connector/J is used to connect applications developed in Java to MariaDB and MySQL databases. From 3.0.0 until 3.3.7, 3.4.5, and 3.5.11, the connector assumed result bytes were UTF-8 but guarded only changes to character_set_client. It did not reject non-UTF-8 character_set_results changes and relied on the server's global session_track_system_variables configuration to report character-set changes. A malicious or compromised server, or a machine-in-the-middle attacker, could suppress tracking or change the result charset so application strings differed from the returned bytes, potentially defeating application-side validation or esca

MariaDB Connector/J : XA recover() trusted server-supplied gtrid and bqual lengths

MariaDB Connector/J is used to connect applications developed in Java to MariaDB and MySQL databases. From 3.0.0 until 3.3.7, 3.4.5, and 3.5.11, the MariaDbPoolConnection.recover() and MariaDbPoolPinnedConnection.recover() implementations trusted the gtrid_length and bqual_length columns returned by XA RECOVER. The methods allocated and split Xid byte arrays without validating the lengths against Xid.MAXGTRIDSIZE, Xid.MAXBQUALSIZE, or the actual data payload. A malicious or compromised server, or a machine-in-the-middle attacker, could cause large allocations, NegativeArraySizeException, or ArrayIndexOutOfBoundsException during XA recovery. T

MariaDB Connector/J: Length-encoded integers larger than Integer.MAX_VALUE were truncated before being used as lengths

MariaDB Connector/J is used to connect applications developed in Java to MariaDB and MySQL databases. From 3.0.0 until 3.3.7, 3.4.5, and 3.5.10, the ReadableByteBuf.readLength() and ReadableByteBuf.readIntLengthEncodedNotNull() methods narrowed the protocol's unsigned 8-byte length-encoded integer to a Java int without checking that the value fit a non-negative integer. Values above Integer.MAX_VALUE could wrap to a negative or unrelated length that downstream allocation and read paths used. A malicious or compromised server, or a machine-in-the-middle attacker, could trigger NegativeArraySizeException, out-of-bounds failures, or oversized al

MariaDB Connector/J: Rogue server can crash the client during caching_sha2_password authentication

MariaDB Connector/J is used to connect applications developed in Java to MariaDB and MySQL databases. From 3.0.0 until 3.3.7 and 3.4.5, during caching_sha2_password authentication, the authentication-more-data response was treated as a length-encoded byte array, memory was allocated from the server-declared length, and authResult[0] was accessed without ensuring a byte existed. A malicious or compromised server, or a machine-in-the-middle attacker, could declare a very large length or send an empty response before any password was transmitted. The malformed packet could cause excessive allocation or an unchecked ArrayIndexOutOfBoundsException

MariaDB Connector/J: Rogue server can make the client read past the packet through server-declared lengths

MariaDB Connector/J is used to connect applications developed in Java to MariaDB and MySQL databases. From 3.0.0 until 3.3.7, 3.4.5, and 3.5.11, decoders for OK packet session-state blocks, column definition packets, text row data, or binary row data used server-declared lengths without confirming that the requested bytes remained in the receive buffer. The decoders could position reads, create sub-buffers, or decode strings beyond the packet boundary. A malicious or compromised server, or a machine-in-the-middle attacker, could trigger unchecked ArrayIndexOutOfBoundsException or IllegalArgumentException failures inside JDBC calls and termina

MariaDB Connector/J: Rogue server can drive large heap allocations from server-declared lengths in OK packets

MariaDB Connector/J is used to connect applications developed in Java to MariaDB and MySQL databases. From 3.0.0 until 3.3.7, 3.4.5, and 3.5.11, when CLIENT_SESSION_TRACK was negotiated, the OkPacket.parse() and OkPacket.parseWithInfo() paths allocated byte arrays using server-declared lengths for the OK packet info field and session-state variable names and values before confirming that the bytes remained in the packet. A malicious or compromised server, or a machine-in-the-middle attacker, could send a small OK packet declaring a much larger length and repeatedly force attacker-controlled heap allocations before the subsequent copy failed.

MariaDB Connector/J: LOAD DATA LOCAL INFILE file check could be satisfied by text inside quoted identifiers, letting a malicious server read client files

MariaDB Connector/J is used to connect applications developed in Java to MariaDB and MySQL databases. From 3.0.0 until 3.3.7, 3.4.5, and 3.5.11, the ClientMessage.validateLocalFileName() check used a regular expression that could match LOAD DATA LOCAL INFILE text inside quoted identifiers, string literals, or comments instead of requiring a real statement. A malicious or compromised server, or a machine-in-the-middle attacker, could return crafted database or table identifiers that the connector reused in metadata or updatable-result queries, then answer with a LOCAL INFILE request for a client file. With allowLocalInfile enabled, this caused

pypdf: Possible large memory usage when parsing cross-reference streams

pypdf is a free and open-source pure-python PDF library. Prior to 6.21.3, pypdf can consume excessive memory while opening a crafted PDF containing cross-reference streams that declare very large entry counts. Highly compressible streams and /Prev chains can multiply the number of parsed entries across a document, while negative /Index counts can bypass the existing per-stream clamp. This issue is fixed in version 6.21.3.

pypdf: Possible long runtimes/large memory usage for encrypted PDF files

pypdf is a free and open-source pure-python PDF library. Prior to 6.21.3, pypdf can consume excessive time and memory when an application accesses the page count of a crafted encrypted PDF whose page tree declares a forged /Count value. Even after successful decryption, page-count retrieval trusts the unvalidated declared count instead of walking the page tree, allowing the attacker-controlled value to drive excessive work and memory use. This issue is fixed in version 6.21.3.

pypdf: Possible large memory usage for exceptions in strict mode

pypdf is a free and open-source pure-python PDF library. Prior to 6.21.3, pypdf can consume excessive memory when strict mode loads a crafted invalid PDF dictionary. Nested parsing failures add repeated exception text to newly raised errors, allowing a small malformed dictionary to amplify into very large error messages. This issue is fixed in version 6.21.3.

pypdf: Possible long runtimes when retrieving page labels

pypdf is a free and open-source pure-python PDF library. Prior to 6.21.3, pypdf can take excessive time to retrieve page labels from a crafted PDF containing a flat page-label number tree with many ranges. The page_labels property resolves each page independently and repeatedly scans the same /Nums array from the beginning, causing work to grow with both the page count and the number of label ranges. This issue is fixed in version 6.21.3.

pypdf: Possible infinite loop when cloning dictionaries

pypdf is a free and open-source pure-python PDF library. Prior to 6.21.4, pypdf can enter an infinite loop when cloning or duplicating a crafted cyclic DictionaryObject. Clone traversal checked generated destination references rather than the original source references, allowing some source cycles to evade the visited-object check. This issue is fixed in version 6.21.4.

Bricks Theme Broken Access Control via load_popup_content

Bricks Theme 2.4 and before for WordPress contains an unauthenticated broken access control vulnerability in the load_popup_content REST endpoint that allows anonymous attackers to read draft and unpublished page content by supplying a popupId parameter without any status or capability checks. Attackers can obtain a public nonce via the bricks_regenerate_query_nonce action and then increment the popupId value in requests to the /wp-json/bricks/v1/load_popup_content endpoint to enumerate and disclose confidential content from any unpublished post on the site.

• Обновитесь до 2.4.1

pypdf: Possible large memory usage when parsing page tree

pypdf is a free and open-source pure-python PDF library. Prior to 6.21.4, pypdf can consume excessive memory while parsing a crafted PDF page tree containing many shared resources. Page-tree flattening copies page dictionary and inherited resource entries without a document-wide entry budget, allowing the crafted resource structure to cause disproportionate allocations. This issue is fixed in version 6.21.4.

pypdf: Possible infinite loop when hitting EOF in standard xref table during trailer search

pypdf is a free and open-source pure-python PDF library. Prior to 6.21.4, pypdf can enter an infinite loop while opening a crafted incomplete PDF whose standard cross-reference table reaches the end of the file without a trailer. The trailer search can repeatedly rewind to the same stream position instead of terminating when parsing makes no progress, blocking the processing thread. This issue is fixed in version 6.21.4.

@hapi/content: quadratic-time parsing of Content-Disposition parameters allows denial of service

@hapi/content provides HTTP Content-* header parsing. From 3.0.6 until 6.0.3, Content.disposition() uses an unanchored parameter-name expression in a global regular-expression scan, causing repeated failed matching over the remaining input when a Content-Disposition parameter contains a long token without an equals sign. The resulting quadratic processing can block the Node.js event loop before route handlers or validation when @hapi/pez parses multipart/form-data headers, including unauthenticated hapi routes with payload.multipart enabled, and also affects applications that pass untrusted headers directly to Content.disposition(). This issu

Nuxt dev server exposes generated appSecret through Vite file serving

Nuxt is an open-source web development framework for Vue.js. From 4.6.0 until 4.6.3, nuxt dev stores a generated appSecret in <buildDir>/app-secret, by default .nuxt/app-secret, within a directory allowed by Vite's server.fs configuration. A client with direct HTTP access to an exposed development server can fetch the file, use deriveSecret() to compute derived secrets such as the default useSession password, and forge session cookies accepted by that development server. The default localhost binding limits remote exposure, cross-origin browser reads are blocked, production builds and development servers with an explicitly configured appSecre

Nuxt: Dot segments in the request path bypass `server/middleware` path checks and server route rules on page routes

Nuxt is an open-source web development framework for Vue.js. From 4.6.0 until 4.6.3, Nuxt resolves literal or percent-encoded dot segments before rendering a page while Nitro routing, server/middleware checks, and server route rules evaluate the unresolved path. A request such as /%2e/admin can therefore render app/pages/admin.vue and its server-rendered data while checks keyed to /admin, redirects, or per-route security headers do not apply. API handlers, appMiddleware, Nuxt 3, and Nuxt 4.0.0 through 4.5.x are not affected, and exploitation requires a client that sends dot segments without browser normalization. This issue is fixed in versio

Nuxt dev server exposes private runtime config through the Nitro dev bundle

Nuxt is an open-source web development framework for Vue.js. From 3.0.0 until 4.6.3, the Nuxt development server can expose the Nitro 2 development bundle at <buildDir>/dev/index.mjs through Vite file serving when the server is reachable over HTTP. Nitro inlines private runtimeConfig values resolved at build time into that bundle, including secrets configured in nuxt.config, and Nuxt 4.6.0 and later also inline the generated development appSecret. The default localhost binding limits remote exposure, production builds and Nitro 3 are not affected, and runtime configuration supplied only through NUXT_* environment variables at server startup i

Nuxt dev server arbitrary file read through client error reports

Nuxt is an open-source web development framework for Vue.js. From 4.6.0 until 4.6.3, a client with TCP access to an exposed Nuxt development server can send a nuxt:dev:client-error event over the HMR socket with an absolute file path at the end of its message. The development server reads that file while building the client error report and returns its contents through the error overlay, development error channel, and terminal report, bypassing Vite's server.fs allow list. The default localhost binding limits remote exposure, cross-origin browser requests are rejected, production builds and Nuxt 3 are not affected, and no browser interaction