Уязвимости traefik · Страница 2

Traefik before v2.11.55 and v3.0.0 through v3.7.10 mTLS Bypass via TLS Option Conflict

Traefik before v2.11.55 and v3.0.0 through v3.7.10 contain a TLS option conflict resolution vulnerability that allows unauthenticated attackers to bypass client-certificate authentication by creating conflicting TLS options on multi-host routers. Attackers can reach protected backends by exploiting shared TLS resolution across multiple hostnames in a single router rule, causing the strict mTLS requirement to fall back to default options for all hosts.

• Обновитесь до 2.11.55

Traefik v3.7 Authentication Bypass via TLS Option Conflict

Traefik versions >= v3.7.0 and <= v3.7.10 contain an authentication bypass in the Kubernetes Ingress NGINX provider. The TLS option generated for an Ingress carrying the nginx.ingress.kubernetes.io/auth-tls-secret annotation was named after the Ingress namespace and name. As a result, two Ingress objects sharing the same host, the same client CA secret, and the same client-authentication mode produced two distinct TLS option names for that host. Traefik treats this as a TLS options conflict and falls back to the entry point's default TLS configuration, which does not request a client certificate, so a route configured with nginx.ingress.kuber

Traefik before v2.11.55 and v3.0.0 through v3.7.10 Authentication Bypass via digestAuth

Traefik versions before v2.11.55 and versions v3.0.0 through v3.7.10 contain an authentication bypass vulnerability in the digestAuth middleware where unknown usernames receive an empty secret instead of rejection. Attackers can compute a valid digest response using the empty secret and arbitrary credentials to bypass authentication on any digestAuth-protected route without a valid username or password.

• Обновитесь до 2.11.55

Traefik v3.7.1 crossProviderNamespaces Bypass via Service Middleware

Traefik versions from v3.7.1 fail to enforce crossProviderNamespaces restrictions on the traefik.ingress.kubernetes.io/service.middlewares Service annotation in the Kubernetes Ingress provider. A namespace-limited tenant excluded from the allowlist can attach an operator-owned middleware to its Service, and if that middleware injects backend credentials, recover them at a controlled backend.

Traefik: Gateway API route identity collision allows cross-namespace backend hijacking

Traefik is an open source HTTP reverse proxy and load balancer. From 3.0.0 until 3.6.25 and 3.7.10, Traefik's Kubernetes Gateway API provider in pkg/provider/kubernetes/gateway/httproute.go, grpcroute.go, tcproute.go, and tlsroute.go builds HTTPRoute, GRPCRoute, TCPRoute, and TLSRoute router and service identities by hyphen-concatenating namespace, route name, Gateway identity, entry point, and rule index, allowing colliding Routes to overwrite another namespace's backend. This issue is fixed in 3.6.25 and 3.7.10.

Traefik: BasicAuth singleflight key collision allows authenticated identity spoofing

Traefik is an open source HTTP reverse proxy and load balancer. From 3.6.11 until 3.6.25 and 3.7.10, Traefik's BasicAuth middleware in pkg/middlewares/auth/basic_auth.go deduplicates concurrent password checks with a singleflight key built from the delimiter-free concatenation of password and secret, allowing an attacker who has a valid credential and the stored hash to authenticate as an unconfigured username when headerField trusts the forwarded identity. This issue is fixed in 3.6.25 and 3.7.10.

Traefik: `allowCrossNamespace=false` bypass via `@kubernetescrd` TraefikService backendRef

Traefik is an open-source edge router that makes publishing services a fun and easy experience. Prior to 2.11.54, 3.6.25, and 3.7.10, cross-namespace @kubernetescrd references are not rejected for TraefikService backend references resolved by the service resolver. A tenant confined by RBAC to a single namespace can therefore bind its own router to a TraefikService owned by another namespace and expose or reroute that namespace's backend, defeating the namespace isolation allowCrossNamespace=false is meant to enforce. This issue is fixed in version 2.11.54, 3.6.25, 3.7.10.

Traefik: Cross-user response poisoning via proxied CONNECT on Traefik's shared backend keep-alive pool

Traefik is an open source HTTP reverse proxy and load balancer. Prior to 2.11.53, 3.6.24, and 3.7.9, Traefik's default HTTP reverse proxy forwards a plain HTTP/2 or HTTP/3 CONNECT request and its body to an HTTP/1.1 upstream through a shared net/http.Transport. When the upstream answers the CONNECT with a keep-alive non-2xx response and does not drain the body, Traefik returns the desynchronized backend socket to its shared pool and reuses it for other clients. An unauthenticated attacker can use this behavior to make a different client read the attacker's smuggled response, which can include authenticated or private content from another requ

Traefik v3.7.0 Path Traversal via RewriteTarget Authentication Bypass

Traefik versions >= v3.7.0 and <= v3.7.7 contain a path traversal vulnerability in the Kubernetes Ingress NGINX provider's RewriteTarget middleware (generated from the nginx.ingress.kubernetes.io/rewrite-target annotation). When an Ingress path uses a regex that captures attacker-controlled text without requiring a path separator (e.g., path /api(.*) with rewrite target /$1), a crafted request such as /api../admin matches the public router, is rewritten to a dot-segment traversal path (/../admin), and is forwarded without post-replacement normalization validation. A backend that normalizes dot segments resolves the path to a protected endpoin

• Обновитесь до 3.7.8

Traefik before 3.6.23 IngressRouteTCP ServersTransport Namespace Bypass

Traefik 3.6.0 through 3.6.22 and 3.7.0 through 3.7.6 fail to enforce the crossProviderNamespaces allowlist for IngressRouteTCP service serversTransport references (the allowlist was only enforced for HTTP serversTransport references). A low-privileged Kubernetes user in a namespace not listed in crossProviderNamespaces can set serversTransport: foo@file on an IngressRouteTCP service, causing Traefik to accept the forbidden cross-provider reference and use a file-provider TCPServersTransport — including privileged backend mTLS client certificates, SPIFFE identity, or PROXY-protocol settings. This is fixed in 3.6.23 and 3.7.7.

• Обновитесь до 3.6.23
• Обновитесь до 3.7.7

Traefik before 3.7.7 Namespace Confusion via HTTPRoute ExtensionRef

Traefik versions 3.7.0 through 3.7.6 contain a namespace confusion vulnerability in the Kubernetes Gateway API provider. When resolving HTTPRoute.spec.rules[].backendRefs[].filters[].extensionRef, Traefik used the backend Service namespace instead of the HTTPRoute namespace. A low-privileged route author holding a ReferenceGrant for a cross-namespace Service could therefore bind a Traefik Middleware from the backend namespace without a separate grant for that middleware, potentially injecting trusted reverse-proxy identity headers into downstream requests. The issue is fixed in version 3.7.7.

• Обновитесь до 3.7.7

Traefik before v2.11.52 Authentication Bypass via ReplacePathRegex

Traefik versions <= v2.11.51, >= v3.6.0 <= v3.6.22, and >= v3.7.0 <= v3.7.6 contain an authentication bypass via path traversal in the ReplacePathRegex middleware. When ReplacePathRegex is configured with a regex that captures user-controlled path segments without a mandatory path separator (e.g. regex "^/api(.*)", replacement "/$1"), the middleware forwards the replaced path to the backend without validating that it matches its normalized form. An unauthenticated remote attacker can send a crafted request (e.g. GET /api../admin) that produces an un-normalized path such as /../admin, which a backend that normalizes paths resolves to a protect

• Обновитесь до 2.11.52
• Обновитесь до 3.6.23
• Обновитесь до 3.7.7

Traefik: headerField underscore-variant identity spoofing in BasicAuth / DigestAuth / ForwardAuth

Traefik is an HTTP reverse proxy and load balancer. Prior to v2.11.51, v3.6.22, and v3.7.6, Traefik's BasicAuth, DigestAuth, and ForwardAuth middlewares strip canonical-cased spoofed identity headers before writing Traefik's own value, but do not account for underscore-variant header names, which many backends normalize identically to dashed forms. An attacker able to reach a protected route can inject an underscore-variant header that survives Traefik's stripping and reaches the backend alongside, or on the unauthenticated ForwardAuth authResponseHeaders path instead of, the value Traefik intended to set, spoofing identity or authorization c

Traefik: Gateway HTTPRoute backendRef filters can leak backend context across routes sharing a Service:port

Traefik is an open source HTTP reverse proxy and load balancer. From v3.7.0 prior to v3.7.6, Traefik's Kubernetes Gateway API provider may resolve two accepted HTTPRoutes that target the same backend Service:port but configure different backendRef filters to the same child service and apply only one route's filter set to all requests reaching that backend. In Gateway deployments where backendRef filters set security-sensitive headers, such as tenant identity, authorization context, or values the backend trusts, an attacker who can create an accepted HTTPRoute sharing the same backend Service:port may cause their route's filter context to be a

ForwardAuth middleware leaks X-Forwarded-Port spoofing via untrusted X-Forwarded-Proto when trustForwardHeader=false

Traefik is an HTTP reverse proxy and load balancer. Prior to v2.11.51, v3.6.22, and v3.7.6, Traefik's ForwardAuth middleware, even when configured with trustForwardHeader: false, derives the X-Forwarded-Port header sent to the authentication service from the original incoming request instead of the sanitized forwarded request. As a result, an unauthenticated remote attacker can inject an X-Forwarded-Proto: https header over a plain HTTP connection and cause Traefik to forward X-Forwarded-Port: 443 to the authentication service, bypassing port-based authorization checks. This issue is fixed in versions v2.11.51, v3.6.22, and v3.7.6.

Traefik Kubernetes Ingress NGINX provider fails open when auth-secret resolution fails

Traefik is an HTTP reverse proxy and load balancer. From 3.7.0-ea.1 until 3.7.5, there is a medium severity vulnerability in Traefik's Kubernetes Ingress NGINX provider that causes affected routes to fail open. When an Ingress explicitly enables BasicAuth or DigestAuth through the supported nginx.ingress.kubernetes.io/auth-type and auth-secret annotations, but the referenced auth Secret cannot be resolved or parsed, Traefik logs the resolution error, skips installing the authentication middleware, and still emits a router to the backend service. A route that operators intended to protect is therefore published to the data plane without its au

Traefik: Kubernetes Gateway crossProviderNamespaces bypass allows HTTPRoute outside the allowlist to expose internal Traefik services

Traefik is an HTTP reverse proxy and load balancer. Prior to 3.6.21 and 3.7.5, there is a high severity vulnerability in Traefik's Kubernetes Gateway provider affecting the crossProviderNamespaces allowlist. For HTTPRoute rules that declare multiple (WRR) backendRefs, Traefik evaluates the allowlist against the target backendRef.namespace instead of the route's own namespace. As a result, an HTTPRoute created in a namespace that is not allow-listed can reference a cross-provider TraefikService such as api@internal, dashboard@internal or rest@internal by pointing backendRef.namespace at an allow-listed namespace covered by a Gateway API Refere

Traefik: HTTP/3 mTLS bypass via exact SNI TLSOptions lookup for wildcard and mixed-case hosts

Traefik is an HTTP reverse proxy and load balancer. Versions prior to 3.7.3, 3.6.18, and 2.11.51 have a critical vulnerability in Traefik's HTTP/3 (QUIC) TLS configuration selection that allows unauthenticated clients to bypass router-specific mTLS enforcement. When HTTP/3 is enabled on an entrypoint, the TLS handshake selects the applicable TLS configuration through an exact, case-sensitive lookup on the SNI value, which fails to match wildcard host patterns (e.g., *.example.com) or case variants of the configured hostname. Because the handshake falls back to the default TLS configuration — which may not require client certificates — a clien

Traefik: SNICheck ignores wildcard TLSOptions mappings, allowing domain-fronted mTLS bypass

Traefik is an HTTP reverse proxy and load balancer. From 3.7.0 until 3.7.3, there is a high severity vulnerability in Traefik's domain-fronting protection (SNICheck) that allows an unauthenticated client to bypass mutual TLS enforced through wildcard router TLSOptions. When a router uses a wildcard host rule such as Host(*.example.com) with stricter TLS options (for example RequireAndVerifyClientCert), SNICheck resolves the TLS options for the HTTP Host header using exact map lookups only and never applies wildcard matching. If another permissive SNI is served on the same entrypoint, an attacker can complete the TLS handshake under the permis

Traefik StripPrefix Route-Level Auth Bypass via Path Normalization

Traefik is an HTTP reverse proxy and load balancer. Prior to 2.11.48, 3.6.19, and 3.7.3, there is a high severity vulnerability in Traefik's StripPrefix middleware that allows an unauthenticated attacker to bypass route-level authentication and authorization. When a public router matches on a PathPrefix rule and applies the StripPrefix middleware, a request path containing .. or its percent-encoded form %2e%2e can match the public route at routing time and then, after the prefix is stripped and the path is normalized, resolve to a path served by a separate, authenticated router. As a result, an attacker can reach protected backend paths — suc