Уязвимости traefik

Traefik before 2.11.58 and 3.7.13 mTLS Bypass via Negated Host Matcher

Traefik before 2.11.58 and 3.7.13 contains an authentication bypass vulnerability that allows unauthenticated clients to skip client-certificate checks because negated Host matchers are counted as served domains. Attackers can reach backends protected by RequireAndVerifyClientCert when a router rule with !Host() creates a TLS options conflict that falls back to the default options.

• Обновитесь до 2.11.58
• Обновитесь до 3.7.13

Traefik before 2.11.58 and 3.7.14 TLS Config Bypass via NTLM/Kerberos Round Tripper

Traefik 2.11.0 before 2.11.58 and 3.0.0 before 3.7.14 stores its NTLM/Kerberos backend round tripper in a client-connection slot not keyed by ServersTransport, so one service's TLS client configuration is reused for another service's backend. An unauthenticated client can arm the slot via a backend issuing an NTLM or Negotiate challenge, then reach another service on the same keep-alive connection, bypassing its root CAs, server name, and certificate verification.

• Обновитесь до 2.11.58
• Обновитесь до 3.7.14

Traefik before 2.11.58 and 3.7.14 Race Condition in NTLM/Kerberos Round Tripper

Traefik 2.11.x before 2.11.58 and 3.x before 3.7.14 contains a race condition in NTLM and Kerberos (Negotiate) backend authentication, where the per-connection sticky round tripper slot is read and written without synchronization. Remote attackers can send concurrent HTTP/2 or HTTP/3 requests over one connection to orphan backend connections, break connection-bound authentication, or crash Traefik.

• Обновитесь до 2.11.58
• Обновитесь до 3.7.14

Traefik v3.7.0 before v3.7.14 mTLS Header Spoofing via Ingress-NGINX HTTP Router

Traefik from v3.7.0 before v3.7.14 contains an authentication bypass vulnerability in its Kubernetes Ingress-NGINX provider that forwards client-supplied Ssl-Client-* headers on the plaintext HTTP router. When ssl-redirect is disabled alongside auth-tls-pass-certificate-to-upstream, unauthenticated attackers can send Ssl-Client-Verify: SUCCESS with a chosen certificate subject and issuer to impersonate mTLS identities.

• Обновитесь до 3.7.14

Traefik before 2.11.58 and 3.7.14 Authentication Bypass via Negotiate Connection Pool

Traefik 2.11.0 before 2.11.58 and 3.0.0 before 3.7.14 contains an authentication bypass because a first request preauthenticated with an Authorization: Negotiate token authenticates a socket in the globally shared backend connection pool, which is never isolated. Unauthenticated attackers on separate frontend connections can be assigned that NTLM/Kerberos-bound socket and perform reads or writes with the victim's identity.

• Обновитесь до 2.11.58
• Обновитесь до 3.7.14

Traefik v3.7.0 before v3.7.14 Client CA Mix-up via auth-tls-secret Name Collision

Traefik v3.7.0 before v3.7.14 contains an improper authentication vulnerability in the Kubernetes Ingress NGINX provider that merges client CAs when auth-tls-secret names collide after dot-to-dash normalization. Attackers holding certificates from another host's CA can access a host requiring its own client CA, while that host's legitimate clients are refused.

• Обновитесь до 3.7.14

Traefik v3.2.0 before v3.7.14 FastProxy NTLM/Negotiate Connection Pool Identity Leak

Traefik from v3.2.0 before v3.7.14 contains an authentication bypass vulnerability in the experimental FastProxy connection pool, which fails to pin NTLM/Negotiate-authenticated backend connections to their frontend connection. Unauthenticated clients can be handed a pooled keep-alive backend connection where a victim completed an NTLM or Negotiate handshake, letting them read victim data and act as that victim.

• Обновитесь до 3.7.14

Traefik v3.7.13 Authentication Bypass via ssl-passthrough Ingress HTTP Router

Traefik v3.7.13 before v3.7.14 contains an access-control bypass in the Kubernetes Ingress NGINX provider, where the HTTP router generated for ssl-passthrough Ingresses on non-TLS entry points never applies the Ingress's access-control annotations. Unauthenticated attackers reaching the HTTP entry point with the Ingress host can access backends protected by auth-type, auth-url, or whitelist-source-range annotations, with nothing logged.

• Обновитесь до 3.7.14

Traefik before v2.11.58 and v3.7.14 SNI Check Bypass via HTTP/2 Scheme

Traefik before v2.11.58 and v3.7.14 contains an authentication bypass vulnerability in its SNI check, which is skipped when request TLS state is nil. Unauthenticated clients can send HTTP/2 requests with the :scheme http pseudo-header over TLS on Go 1.27 builds to reach routers requiring client certificates without presenting one.

• Обновитесь до 2.11.58
• Обновитесь до 3.7.14

Traefik before 2.11.46, 3.6.17, and 3.7.1 Cross-Namespace Resource Reference via Kubernetes Annotations

Traefik before 2.11.46, 3.x before 3.6.17, and 3.7.0 lack namespace validation for Ingress and Service annotations in the Kubernetes Ingress provider, allowing references to Middlewares, ServersTransports, and TLSOptions in other namespaces. Attackers able to create or update Ingress or Service resources in one namespace can set router.middlewares or service.serverstransport annotations to obtain another tenant's injected credentials or reuse its client certificates, bypassing namespace-based tenant isolation.

• Обновитесь до 2.11.46
• Обновитесь до 3.6.17
• Обновитесь до 3.7.1

Traefik: BasicAuth singleflight coalescing reintroduces an unauthenticated username-enumeration timing oracle

Traefik is an open source HTTP reverse proxy and load balancer. From 3.6.11 until 3.7.13, checkPassword in pkg/middlewares/auth/basic_auth.go constructs the BasicAuth singleflight key from the submitted password and stored secret. Concurrent requests for absent usernames therefore coalesce on one key while configured usernames perform separate password hashes, creating an unauthenticated timing discrepancy that reveals whether a username exists. Sequential checks remain cost-equalized, Traefik v2 and Digest authentication are not affected, and the issue does not disclose credentials or bypass authentication. This issue is fixed in version 3.7

Traefik: respondingTimeouts.readTimeout is not applied to HTTP/3, leaving slow-body uploads unbounded

Traefik is an open source HTTP reverse proxy and load balancer. From 2.8.2 until 2.11.56 and 3.7.12, HTTP/3 entrypoints do not apply entryPoints..transport.respondingTimeouts.readTimeout because the timeout is enforced on a TCP connection and the HTTP/3 server has no corresponding QUIC stream deadline. An unauthenticated client can use a slow request body, trickling data indefinitely while holding a request and an upstream connection open and exhausting backends with bounded connection pools. This issue is fixed in 2.11.56 and 3.7.12.

Traefik: ForwardAuth identity spoofing via dot-form header alias

Traefik is an open source HTTP reverse proxy and load balancer. Prior to 2.11.56, and from 3.0.0 until 3.7.12, a client-supplied dot-form header such as X.Authenticated.User survives ForwardAuth replacement and underscoreHeadersStrategy because Go treats it as distinct from X-Authenticated-User while normalization-prone CGI, WSGI, PHP, and NGINX backends collapse both names. A backend can consequently consume the client value instead of the identity Traefik asserted, allowing identity spoofing for any header managed by Traefik. The aliasHeadersStrategy protection is disabled by default and must be configured as delete or reject. The mitigatio

Traefik: Rootless HTTP/1 request-target routes as "/" but is forwarded verbatim, bypassing path-scoped routing, middleware guards and access logging

Traefik is an open source HTTP reverse proxy and load balancer. Prior to 2.11.57, and 3.7.13, Traefik accepts a rootless HTTP/1 request target that Go stores in URL.Opaque while leaving URL.Path empty. The rewriteRequestBuilder path evaluates routing, path sanitization, forwardAuth, encodedCharacters, and access logging against a path normalized to / but forwards URL.Opaque verbatim to the backend, allowing cross-vhost routing bypass, path-scoped authorization bypass, and access-log evasion when the backend interprets the opaque target as a path. This issue is fixed in 2.11.57 and 3.7.13.

Traefik: Inconsistent Interpretation of HTTP Requests ('HTTP Request/Response Smuggling') and Incorrect Authorization

Traefik is an open source HTTP reverse proxy and load balancer. From 2.11.26 until 2.11.57 and 3.7.13, Traefik forwards a client-supplied Connection header requesting Upgrade, the Upgrade: h2c token, and HTTP2-Settings to a shared backend. If the backend accepts h2c and returns 101 Switching Protocols, Traefik enters a raw tunnel and no longer applies routers, BasicAuth, ForwardAuth, IPAllowList, RateLimit, access logging, metrics, or tracing to later HTTP/2 requests, allowing an unauthenticated request through an unprotected route to reach protected paths on the same backend. This issue is fixed in 2.11.57 and 3.7.13.

Traefik HTTP/3 Backend NTLM Connection Reuse

Traefik is an open source HTTP reverse proxy and load balancer. From 2.11.0 until 2.11.57 and 3.7.13, the HTTP/3 entrypoint ConnContext does not call service.AddTransportOnContext, so kerberosRoundTripper uses a shared backend transport instead of a transport dedicated to each frontend connection. With HTTP/3 enabled, a backend using connection-bound NTLM or Negotiate authentication, and backend keep-alive, an unrelated client can reuse a backend connection authenticated for a victim, read victim-only data, and act as that victim without the victim credentials. This issue is fixed in 2.11.57 and 3.7.13.

Traefik entrypoint header-name sanitization bypassed via request trailers

Traefik is an open source HTTP reverse proxy and load balancer. From 3.2.0 until 3.7.13, Traefik entrypoint defenses aliasHeadersStrategy, underscoreHeadersStrategy, and forwardedHeaders inspect req.Header but not req.Trailer, allowing an unauthenticated client to submit an aliasing or trusted header name in an HTTP/1.1 chunked trailer or an HTTP/2 trailer. When the retry or buffering middleware reads the body before the reverse proxy clones the request, the attacker-controlled trailer value reaches a backend that merges trailers into the header namespace, bypassing the documented delete or reject behavior and potentially spoofing identity or

Traefik before v2.11.56 Identity Spoofing via Header Alias

Traefik is an HTTP reverse proxy and load balancer. In Traefik v1.x, v2.x through v2.11.55, and v3.0.0 through v3.7.11, header names are canonicalized only on dashes, so X-Auth-User, X_Auth_User and X.Auth.User are treated as three distinct headers by Traefik, while backends that derive variable names from header names (CGI, WSGI, PHP, NGINX and others) collapse them into a single variable. A client can therefore smuggle a dot-form alias of a header that Traefik manages past the middleware managing it — for example supplying X.Authenticated.User alongside the canonical X-Authenticated-User written by the ForwardAuth middleware — causing such

• Обновитесь до 2.11.56

Traefik v2.8.2 through v3.6 HTTP/3 Timeout Bypass

Traefik is an HTTP reverse proxy and load balancer. In versions >= v2.8.2 through <= v2.11.55 and >= v3.0.0 through <= v3.7.11, the entryPoints.<name>.transport.respondingTimeouts settings — notably readTimeout, which is enabled by default at 60s — are not applied to the HTTP/3 request path. readTimeout is enforced as a deadline on the underlying TCP connection, which cannot be applied to a QUIC stream, and Traefik's HTTP/3 server is constructed without any timeout. As a result, on entry points with HTTP/3 enabled, an unauthenticated remote client that trickles request body bytes can hold a request open indefinitely and, with it, one upstream

Traefik v3.7.0 Authentication Bypass via from-to-www-redirect

Traefik is a HTTP reverse proxy and load balancer. In versions >= v3.7.0 and <= v3.7.11, the Kubernetes ingress-nginx provider mishandles Ingresses that carry both an authentication annotation and the nginx.ingress.kubernetes.io/from-to-www-redirect annotation. For such Ingresses the provider creates an additional 'sibling' router that matches on the host alone, carries only the RedirectRegex middleware, and still points at the parent router's protected backend service. Because RedirectRegex is not a terminal handler, a request its pattern does not match is forwarded to the backend, and because the redirect pattern only accepts a numeric port