ARM: versatile: Add missing of_node_put in dcscb_init
In the Linux kernel, the following vulnerability has been resolved:
ARM: versatile: Add missing of_node_put in dcscb_init
The device_node pointer is returned by of_find_compatible_node
with refcount incremented. We should use of_node_put() to avoid
the refcount leak.
rxrpc: Fix listen() setting the bar too high for the prealloc rings
In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix listen() setting the bar too high for the prealloc rings
AF_RXRPC's listen() handler lets you set the backlog up to 32 (if you bump
up the sysctl), but whilst the preallocation circular buffers have 32 slots
in them, one of them has to be a dead slot because we're using CIRC_CNT().
This means that listen(rxrpc_sock, 32) will cause an oops when the socket
is closed because rxrpc_service_prealloc_one() allocated one too many calls
and rxrpc_discard_prealloc() won't then be able to get rid of them because
it'll think the ring is empty. rxrpc_release_calls_on_socke
ARM: hisi: Add missing of_node_put after of_find_compatible_node
In the Linux kernel, the following vulnerability has been resolved:
ARM: hisi: Add missing of_node_put after of_find_compatible_node
of_find_compatible_node will increment the refcount of the returned
device_node. Calling of_node_put() to avoid the refcount leak
In the Linux kernel, the following vulnerability has been resolved:
drivers/base/node.c: fix compaction sysfs file leak
Compaction sysfs file is created via compaction_register_node in
register_node. But we forgot to remove it in unregister_node. Thus
compaction sysfs file is leaked. Using compaction_unregister_node to fix
this issue.
tty: fix deadlock caused by calling printk() under tty_port->lock
In the Linux kernel, the following vulnerability has been resolved:
tty: fix deadlock caused by calling printk() under tty_port->lock
pty_write() invokes kmalloc() which may invoke a normal printk() to print
failure message. This can cause a deadlock in the scenario reported by
syz-bot below:
CPU0 CPU1 CPU2
---- ---- ----
lock(console_owner);
lock(&port_lock_key);
lock(&port->lock);
lock(&port_lock_key);
lock(&port
powerpc/fsl_rio: Fix refcount leak in fsl_rio_setup
In the Linux kernel, the following vulnerability has been resolved:
powerpc/fsl_rio: Fix refcount leak in fsl_rio_setup
of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.
Input: sparcspkr - fix refcount leak in bbc_beep_probe
In the Linux kernel, the following vulnerability has been resolved:
Input: sparcspkr - fix refcount leak in bbc_beep_probe
of_find_node_by_path() calls of_find_node_opts_by_path(),
which returns a node pointer with refcount
incremented, we should use of_node_put() on it when done.
Add missing of_node_put() to avoid refcount leak.
PCI: Avoid pci_dev_lock() AB/BA deadlock with sriov_numvfs_store()
In the Linux kernel, the following vulnerability has been resolved:
PCI: Avoid pci_dev_lock() AB/BA deadlock with sriov_numvfs_store()
The sysfs sriov_numvfs_store() path acquires the device lock before the
config space access lock:
sriov_numvfs_store
device_lock # A (1) acquire device lock
sriov_configure
vfio_pci_sriov_configure # (for example)
vfio_pci_core_sriov_configure
pci_disable_sriov
sriov_disable
pci_cfg_access_lock
pci_wait_cfg # B (4) wait for dev->block_cfg_access == 0
Previously, pci_dev_lock() acquired the config space access lo
powerpc/xics: fix refcount leak in icp_opal_init()
In the Linux kernel, the following vulnerability has been resolved:
powerpc/xics: fix refcount leak in icp_opal_init()
The of_find_compatible_node() function returns a node pointer with
refcount incremented, use of_node_put() on it when done.
In the Linux kernel, the following vulnerability has been resolved:
RDMA/hfi1: Prevent panic when SDMA is disabled
If the hfi1 module is loaded with HFI1_CAP_SDMA off, a call to
hfi1_write_iter() will dereference a NULL pointer and panic. A typical
stack frame is:
sdma_select_user_engine [hfi1]
hfi1_user_sdma_process_request [hfi1]
hfi1_write_iter [hfi1]
do_iter_readv_writev
do_iter_write
vfs_writev
do_writev
do_syscall_64
The fix is to test for SDMA in hfi1_write_iter() and fail the I/O with
EINVAL.
f2fs: fix dereference of stale list iterator after loop body
In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix dereference of stale list iterator after loop body
The list iterator variable will be a bogus pointer if no break was hit.
Dereferencing it (cur->page in this case) could load an out-of-bounds/undefined
value making it unsafe to use that in the comparision to determine if the
specific element was found.
Since 'cur->page' *can* be out-ouf-bounds it cannot be guaranteed that
by chance (or intention of an attacker) it matches the value of 'page'
even though the correct element was not found.
This is fixed by using a separate list iterator variable for the loop
and
video: fbdev: clcdfb: Fix refcount leak in clcdfb_of_vram_setup
In the Linux kernel, the following vulnerability has been resolved:
video: fbdev: clcdfb: Fix refcount leak in clcdfb_of_vram_setup
of_parse_phandle() returns a node pointer with refcount incremented, we should
use of_node_put() on it when not need anymore. Add missing of_node_put() to
avoid refcount leak.
wifi: mac80211: fix use-after-free in chanctx code
In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: fix use-after-free in chanctx code
In ieee80211_vif_use_reserved_context(), when we have an
old context and the new context's replace_state is set to
IEEE80211_CHANCTX_REPLACE_NONE, we free the old context
in ieee80211_vif_use_reserved_reassign(). Therefore, we
cannot check the old_ctx anymore, so we should set it to
NULL after this point.
However, since the new_ctx replace state is clearly not
IEEE80211_CHANCTX_REPLACES_OTHER, we're not going to do
anything else in this function and can just return to
avoid accessing the freed old_ctx.
In the Linux kernel, the following vulnerability has been resolved:
dlm: fix plock invalid read
This patch fixes an invalid read showed by KASAN. A unlock will allocate a
"struct plock_op" and a followed send_op() will append it to a global
send_list data structure. In some cases a followed dev_read() moves it
to recv_list and dev_write() will cast it to "struct plock_xop" and access
fields which are only available in those structures. At this point an
invalid read happens by accessing those fields.
To fix this issue the "callback" field is moved to "struct plock_op" to
indicate that a cast to "plock_xop" is allowed and does the additional
In the Linux kernel, the following vulnerability has been resolved:
RDMA/hfi1: Fix potential integer multiplication overflow errors
When multiplying of different types, an overflow is possible even when
storing the result in a larger type. This is because the conversion is
done after the multiplication. So arithmetic overflow and thus in
incorrect value is possible.
Correct an instance of this in the inter packet delay calculation. Fix by
ensuring one of the operands is u64 which will promote the other to u64 as
well ensuring no overflow.
tty: goldfish: Use tty_port_destroy() to destroy port
In the Linux kernel, the following vulnerability has been resolved:
tty: goldfish: Use tty_port_destroy() to destroy port
In goldfish_tty_probe(), the port initialized through tty_port_init()
should be destroyed in error paths.In goldfish_tty_remove(), qtty->port
also should be destroyed or else might leak resources.
Fix the above by calling tty_port_destroy().
phy: qcom-qmp: fix struct clk leak on probe errors
In the Linux kernel, the following vulnerability has been resolved:
phy: qcom-qmp: fix struct clk leak on probe errors
Make sure to release the pipe clock reference in case of a late probe
error (e.g. probe deferral).
phy: qcom-qmp: fix reset-controller leak on probe errors
In the Linux kernel, the following vulnerability has been resolved:
phy: qcom-qmp: fix reset-controller leak on probe errors
Make sure to release the lane reset controller in case of a late probe
error (e.g. probe deferral).
Note that due to the reset controller being defined in devicetree in
"lane" child nodes, devm_reset_control_get_exclusive() cannot be used
directly.
In the Linux kernel, the following vulnerability has been resolved:
um: Fix out-of-bounds read in LDT setup
syscall_stub_data() expects the data_count parameter to be the number of
longs, not bytes.
==================================================================
BUG: KASAN: stack-out-of-bounds in syscall_stub_data+0x70/0xe0
Read of size 128 at addr 000000006411f6f0 by task swapper/1
CPU: 0 PID: 1 Comm: swapper Not tainted 5.18.0+ #18
Call Trace:
show_stack.cold+0x166/0x2a7
__dump_stack+0x3a/0x43
dump_stack_lvl+0x1f/0x27
print_report.cold+0xdb/0xf81
kasan_report+0x119/0x1f0
kasan_check_range+0x3a3/0x440
memcpy+0x52/0x
In the Linux kernel, the following vulnerability has been resolved:
usb: usbip: fix a refcount leak in stub_probe()
usb_get_dev() is called in stub_device_alloc(). When stub_probe() fails
after that, usb_put_dev() needs to be called to release the reference.
Fix this by moving usb_put_dev() to sdev_free error path handling.
Find this by code review.