xhci: Fix command ring pointer corruption while aborting a command
In the Linux kernel, the following vulnerability has been resolved:
xhci: Fix command ring pointer corruption while aborting a command
The command ring pointer is located at [6:63] bits of the command
ring control register (CRCR). All the control bits like command stop,
abort are located at [0:3] bits. While aborting a command, we read the
CRCR and set the abort bit and write to the CRCR. The read will always
give command ring pointer as all zeros. So we essentially write only
the control bits. Since we split the 64 bit write into two 32 bit writes,
there is a possibility of xHC command ring stopped before the upper
dword (all zeros) is wri
clk: mediatek: clk-mt7629-eth: Add check for mtk_alloc_clk_data
In the Linux kernel, the following vulnerability has been resolved:
clk: mediatek: clk-mt7629-eth: Add check for mtk_alloc_clk_data
Add the check for the return value of mtk_alloc_clk_data() in order to
avoid NULL pointer dereference.
clk: mediatek: clk-mt2701: Add check for mtk_alloc_clk_data
In the Linux kernel, the following vulnerability has been resolved:
clk: mediatek: clk-mt2701: Add check for mtk_alloc_clk_data
Add the check for the return value of mtk_alloc_clk_data() in order to
avoid NULL pointer dereference.
clk: mediatek: clk-mt6779: Add check for mtk_alloc_clk_data
In the Linux kernel, the following vulnerability has been resolved:
clk: mediatek: clk-mt6779: Add check for mtk_alloc_clk_data
Add the check for the return value of mtk_alloc_clk_data() in order to
avoid NULL pointer dereference.
soc: qcom: llcc: Handle a second device without data corruption
In the Linux kernel, the following vulnerability has been resolved:
soc: qcom: llcc: Handle a second device without data corruption
Usually there is only one llcc device. But if there were a second, even
a failed probe call would modify the global drv_data pointer. So check
if drv_data is valid before overwriting it.
In the Linux kernel, the following vulnerability has been resolved:
thermal: core: prevent potential string overflow
The dev->id value comes from ida_alloc() so it's a number between zero
and INT_MAX. If it's too high then these sprintf()s will overflow.
In the Linux kernel, the following vulnerability has been resolved:
drm/radeon: possible buffer overflow
Buffer 'afmt_status' of size 6 could overflow, since index 'afmt_idx' is
checked after access.
clk: mediatek: clk-mt6797: Add check for mtk_alloc_clk_data
In the Linux kernel, the following vulnerability has been resolved:
clk: mediatek: clk-mt6797: Add check for mtk_alloc_clk_data
Add the check for the return value of mtk_alloc_clk_data() in order to
avoid NULL pointer dereference.
In the Linux kernel, the following vulnerability has been resolved:
platform/x86: wmi: Fix opening of char device
Since commit fa1f68db6ca7 ("drivers: misc: pass miscdevice pointer via
file private data"), the miscdevice stores a pointer to itself inside
filp->private_data, which means that private_data will not be NULL when
wmi_char_open() is called. This might cause memory corruption should
wmi_char_open() be unable to find its driver, something which can
happen when the associated WMI device is deleted in wmi_free_devices().
Fix the problem by using the miscdevice pointer to retrieve the WMI
device data associated with a char device usi
clk: mediatek: clk-mt7629: Add check for mtk_alloc_clk_data
In the Linux kernel, the following vulnerability has been resolved:
clk: mediatek: clk-mt7629: Add check for mtk_alloc_clk_data
Add the check for the return value of mtk_alloc_clk_data() in order to
avoid NULL pointer dereference.
usb: dwc2: fix possible NULL pointer dereference caused by driver concurrency
In the Linux kernel, the following vulnerability has been resolved:
usb: dwc2: fix possible NULL pointer dereference caused by driver concurrency
In _dwc2_hcd_urb_enqueue(), "urb->hcpriv = NULL" is executed without
holding the lock "hsotg->lock". In _dwc2_hcd_urb_dequeue():
spin_lock_irqsave(&hsotg->lock, flags);
...
if (!urb->hcpriv) {
dev_dbg(hsotg->dev, "## urb->hcpriv is NULL ##\n");
goto out;
}
rc = dwc2_hcd_urb_dequeue(hsotg, urb->hcpriv); // Use urb->hcpriv
...
out:
spin_unlock_irqrestore(&hsotg->lock, flags);
When _dwc2_hcd_urb_enqueue() and _dwc2_hcd_urb_dequeue() are
concurrently executed, the NULL chec
In the Linux kernel, the following vulnerability has been resolved:
hid: cp2112: Fix duplicate workqueue initialization
Previously the cp2112 driver called INIT_DELAYED_WORK within
cp2112_gpio_irq_startup, resulting in duplicate initilizations of the
workqueue on subsequent IRQ startups following an initial request. This
resulted in a warning in set_work_data in workqueue.c, as well as a rare
NULL dereference within process_one_work in workqueue.c.
Initialize the workqueue within _probe instead.
media: bttv: fix use after free error due to btv->timeout timer
In the Linux kernel, the following vulnerability has been resolved:
media: bttv: fix use after free error due to btv->timeout timer
There may be some a race condition between timer function
bttv_irq_timeout and bttv_remove. The timer is setup in
probe and there is no timer_delete operation in remove
function. When it hit kfree btv, the function might still be
invoked, which will cause use after free bug.
This bug is found by static analysis, it may be false positive.
Fix it by adding del_timer_sync invoking to the remove function.
cpu0 cpu1
bttv_probe
->timer_setup
tipc: Change nla_policy for bearer-related names to NLA_NUL_STRING
In the Linux kernel, the following vulnerability has been resolved:
tipc: Change nla_policy for bearer-related names to NLA_NUL_STRING
syzbot reported the following uninit-value access issue [1]:
=====================================================
BUG: KMSAN: uninit-value in strlen lib/string.c:418 [inline]
BUG: KMSAN: uninit-value in strstr+0xb8/0x2f0 lib/string.c:756
strlen lib/string.c:418 [inline]
strstr+0xb8/0x2f0 lib/string.c:756
tipc_nl_node_reset_link_stats+0x3ea/0xb50 net/tipc/node.c:2595
genl_family_rcv_msg_doit net/netlink/genetlink.c:971 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:1051 [inline]
genl_rcv_msg+0x1
In the Linux kernel, the following vulnerability has been resolved:
llc: verify mac len before reading mac header
LLC reads the mac header with eth_hdr without verifying that the skb
has an Ethernet header.
Syzbot was able to enter llc_rcv on a tun device. Tun can insert
packets without mac len and with user configurable skb->protocol
(passing a tun_pi header when not configuring IFF_NO_PI).
BUG: KMSAN: uninit-value in llc_station_ac_send_test_r net/llc/llc_station.c:81 [inline]
BUG: KMSAN: uninit-value in llc_station_rcv+0x6fb/0x1290 net/llc/llc_station.c:111
llc_station_ac_send_test_r net/llc/llc_station.c:81 [inline]
ll
Input: synaptics-rmi4 - fix use after free in rmi_unregister_function()
In the Linux kernel, the following vulnerability has been resolved:
Input: synaptics-rmi4 - fix use after free in rmi_unregister_function()
The put_device() calls rmi_release_function() which frees "fn" so the
dereference on the next line "fn->num_of_irqs" is a use after free.
Move the put_device() to the end to fix this.
In the Linux kernel, the following vulnerability has been resolved:
fbdev: imsttfb: fix a resource leak in probe
I've re-written the error handling but the bug is that if init_imstt()
fails we need to call iounmap(par->cmap_regs).
In the Linux kernel, the following vulnerability has been resolved:
locking/ww_mutex/test: Fix potential workqueue corruption
In some cases running with the test-ww_mutex code, I was seeing
odd behavior where sometimes it seemed flush_workqueue was
returning before all the work threads were finished.
Often this would cause strange crashes as the mutexes would be
freed while they were being used.
Looking at the code, there is a lifetime problem as the
controlling thread that spawns the work allocates the
"struct stress" structures that are passed to the workqueue
threads. Then when the workqueue threads are finished,
they free the stress s