In the Linux kernel, the following vulnerability has been resolved:
net_sched: cls_flow: validate TCA_FLOW_RSHIFT attribute
syzbot found that TCA_FLOW_RSHIFT attribute was not validated.
Right shitfing a 32bit integer is undefined for large shift values.
UBSAN: shift-out-of-bounds in net/sched/cls_flow.c:329:23
shift exponent 9445 is too large for 32-bit type 'u32' (aka 'unsigned int')
CPU: 1 UID: 0 PID: 54 Comm: kworker/u8:3 Not tainted 6.13.0-rc3-syzkaller-00180-g4f619d518db9 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Workqueue: ipv6_addrconf addrconf_dad_work
Call Trace:
<TASK>
__dump
netfilter: conntrack: clamp maximum hashtable size to INT_MAX
In the Linux kernel, the following vulnerability has been resolved:
netfilter: conntrack: clamp maximum hashtable size to INT_MAX
Use INT_MAX as maximum size for the conntrack hashtable. Otherwise, it
is possible to hit WARN_ON_ONCE in __kvmalloc_node_noprof() when
resizing hashtable because __GFP_NOWARN is unset. See:
0708a0afe291 ("mm: Consider __GFP_NOWARN flag for oversized kvmalloc() calls")
Note: hashtable resize is only possible from init_netns.
In the Linux kernel, the following vulnerability has been resolved:
sched: sch_cake: add bounds checks to host bulk flow fairness counts
Even though we fixed a logic error in the commit cited below, syzbot
still managed to trigger an underflow of the per-host bulk flow
counters, leading to an out of bounds memory access.
To avoid any such logic errors causing out of bounds memory accesses,
this commit factors out all accesses to the per-host bulk flow counters
to a series of helpers that perform bounds-checking before any
increments and decrements. This also has the benefit of improving
readability by moving the conditional checks for the
In the Linux kernel, the following vulnerability has been resolved:
afs: Fix the maximum cell name length
The kafs filesystem limits the maximum length of a cell to 256 bytes, but a
problem occurs if someone actually does that: kafs tries to create a
directory under /proc/net/afs/ with the name of the cell, but that fails
with a warning:
WARNING: CPU: 0 PID: 9 at fs/proc/generic.c:405
because procfs limits the maximum filename length to 255.
However, the DNS limits the maximum lookup length and, by extension, the
maximum cell name, to 255 less two (length count and trailing NUL).
Fix this by limiting the maximum acceptable celln
sctp: sysctl: cookie_hmac_alg: avoid using current->nsproxy
In the Linux kernel, the following vulnerability has been resolved:
sctp: sysctl: cookie_hmac_alg: avoid using current->nsproxy
As mentioned in a previous commit of this series, using the 'net'
structure via 'current' is not recommended for different reasons:
- Inconsistency: getting info from the reader's/writer's netns vs only
from the opener's netns.
- current->nsproxy can be NULL in some cases, resulting in an 'Oops'
(null-ptr-deref), e.g. when the current task is exiting, as spotted by
syzbot [1] using acct(2).
The 'net' structure can be obtained from the table->data using
container_of().
Note that table->data could also be u
sctp: sysctl: rto_min/max: avoid using current->nsproxy
In the Linux kernel, the following vulnerability has been resolved:
sctp: sysctl: rto_min/max: avoid using current->nsproxy
As mentioned in a previous commit of this series, using the 'net'
structure via 'current' is not recommended for different reasons:
- Inconsistency: getting info from the reader's/writer's netns vs only
from the opener's netns.
- current->nsproxy can be NULL in some cases, resulting in an 'Oops'
(null-ptr-deref), e.g. when the current task is exiting, as spotted by
syzbot [1] using acct(2).
The 'net' structure can be obtained from the table->data using
container_of().
Note that table->data could also be used
sctp: sysctl: auth_enable: avoid using current->nsproxy
In the Linux kernel, the following vulnerability has been resolved:
sctp: sysctl: auth_enable: avoid using current->nsproxy
As mentioned in a previous commit of this series, using the 'net'
structure via 'current' is not recommended for different reasons:
- Inconsistency: getting info from the reader's/writer's netns vs only
from the opener's netns.
- current->nsproxy can be NULL in some cases, resulting in an 'Oops'
(null-ptr-deref), e.g. when the current task is exiting, as spotted by
syzbot [1] using acct(2).
The 'net' structure can be obtained from the table->data using
container_of().
Note that table->data could also be used
sctp: sysctl: udp_port: avoid using current->nsproxy
In the Linux kernel, the following vulnerability has been resolved:
sctp: sysctl: udp_port: avoid using current->nsproxy
As mentioned in a previous commit of this series, using the 'net'
structure via 'current' is not recommended for different reasons:
- Inconsistency: getting info from the reader's/writer's netns vs only
from the opener's netns.
- current->nsproxy can be NULL in some cases, resulting in an 'Oops'
(null-ptr-deref), e.g. when the current task is exiting, as spotted by
syzbot [1] using acct(2).
The 'net' structure can be obtained from the table->data using
container_of().
Note that table->data could also be used dir
sctp: sysctl: plpmtud_probe_interval: avoid using current->nsproxy
In the Linux kernel, the following vulnerability has been resolved:
sctp: sysctl: plpmtud_probe_interval: avoid using current->nsproxy
As mentioned in a previous commit of this series, using the 'net'
structure via 'current' is not recommended for different reasons:
- Inconsistency: getting info from the reader's/writer's netns vs only
from the opener's netns.
- current->nsproxy can be NULL in some cases, resulting in an 'Oops'
(null-ptr-deref), e.g. when the current task is exiting, as spotted by
syzbot [1] using acct(2).
The 'net' structure can be obtained from the table->data using
container_of().
Note that table->data could al
block, bfq: fix waker_bfqq UAF after bfq_split_bfqq()
In the Linux kernel, the following vulnerability has been resolved:
block, bfq: fix waker_bfqq UAF after bfq_split_bfqq()
Our syzkaller report a following UAF for v6.6:
BUG: KASAN: slab-use-after-free in bfq_init_rq+0x175d/0x17a0 block/bfq-iosched.c:6958
Read of size 8 at addr ffff8881b57147d8 by task fsstress/232726
CPU: 2 PID: 232726 Comm: fsstress Not tainted 6.6.0-g3629d1885222 #39
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x91/0xf0 lib/dump_stack.c:106
print_address_description.constprop.0+0x66/0x300 mm/kasan/report.c:364
print_report+0x3e/0x70 mm/kasan/report.c:475
kasan_report+0xb8/0xf0 mm/ka
In the Linux kernel, the following vulnerability has been resolved:
net: fix memory leak in tcp_conn_request()
If inet_csk_reqsk_queue_hash_add() return false, tcp_conn_request() will
return without free the dst memory, which allocated in af_ops->route_req.
Here is the kmemleak stack:
unreferenced object 0xffff8881198631c0 (size 240):
comm "softirq", pid 0, jiffies 4299266571 (age 1802.392s)
hex dump (first 32 bytes):
00 10 9b 03 81 88 ff ff 80 98 da bc ff ff ff ff ................
81 55 18 bb ff ff ff ff 00 00 00 00 00 00 00 00 .U..............
backtrace:
[<ffffffffb93e8d4c>] kmem_cache_alloc+0x60c/0xa80
[<fffffff
In the Linux kernel, the following vulnerability has been resolved:
netrom: check buffer length before accessing it
Syzkaller reports an uninit value read from ax25cmp when sending raw message
through ieee802154 implementation.
=====================================================
BUG: KMSAN: uninit-value in ax25cmp+0x3a5/0x460 net/ax25/ax25_addr.c:119
ax25cmp+0x3a5/0x460 net/ax25/ax25_addr.c:119
nr_dev_get+0x20e/0x450 net/netrom/nr_route.c:601
nr_route_frame+0x1a2/0xfc0 net/netrom/nr_route.c:774
nr_xmit+0x5a/0x1c0 net/netrom/nr_dev.c:144
__netdev_start_xmit include/linux/netdevice.h:4940 [inline]
netdev_start_xmit include/linux/netd
In the Linux kernel, the following vulnerability has been resolved:
RDMA/rtrs: Ensure 'ib_sge list' is accessible
Move the declaration of the 'ib_sge list' variable outside the
'always_invalidate' block to ensure it remains accessible for use
throughout the function.
Previously, 'ib_sge list' was declared within the 'always_invalidate'
block, limiting its accessibility, then caused a
'BUG: kernel NULL pointer dereference'[1].
? __die_body.cold+0x19/0x27
? page_fault_oops+0x15a/0x2d0
? search_module_extables+0x19/0x60
? search_bpf_extables+0x5f/0x80
? exc_page_fault+0x7e/0x180
? asm_exc_page_fault+0x26/0x30
? memcpy_orig+0xd5/0x140
In the Linux kernel, the following vulnerability has been resolved:
net: restrict SO_REUSEPORT to inet sockets
After blamed commit, crypto sockets could accidentally be destroyed
from RCU call back, as spotted by zyzbot [1].
Trying to acquire a mutex in RCU callback is not allowed.
Restrict SO_REUSEPORT socket option to inet sockets.
v1 of this patch supported TCP, UDP and SCTP sockets,
but fcnal-test.sh test needed RAW and ICMP support.
[1]
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:562
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 24, name: ksoftirqd/1
preempt_count: 100, expected: 0
RCU nest
In the Linux kernel, the following vulnerability has been resolved:
af_packet: fix vlan_get_tci() vs MSG_PEEK
Blamed commit forgot MSG_PEEK case, allowing a crash [1] as found
by syzbot.
Rework vlan_get_tci() to not touch skb at all,
so that it can be used from many cpus on the same skb.
Add a const qualifier to skb argument.
[1]
skbuff: skb_under_panic: text:ffffffff8a8da482 len:32 put:14 head:ffff88807a1d5800 data:ffff88807a1d5810 tail:0x14 end:0x140 dev:<NULL>
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:206 !
Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 0 UID: 0 PID: 5880 Comm: syz-executor172 N
af_packet: fix vlan_get_protocol_dgram() vs MSG_PEEK
In the Linux kernel, the following vulnerability has been resolved:
af_packet: fix vlan_get_protocol_dgram() vs MSG_PEEK
Blamed commit forgot MSG_PEEK case, allowing a crash [1] as found
by syzbot.
Rework vlan_get_protocol_dgram() to not touch skb at all,
so that it can be used from many cpus on the same skb.
Add a const qualifier to skb argument.
[1]
skbuff: skb_under_panic: text:ffffffff8a8ccd05 len:29 put:14 head:ffff88807fc8e400 data:ffff88807fc8e3f4 tail:0x11 end:0x140 dev:<NULL>
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:206 !
Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 1 UID: 0 PID: 5892 C
In the Linux kernel, the following vulnerability has been resolved:
ila: serialize calls to nf_register_net_hooks()
syzbot found a race in ila_add_mapping() [1]
commit 031ae72825ce ("ila: call nf_unregister_net_hooks() sooner")
attempted to fix a similar issue.
Looking at the syzbot repro, we have concurrent ILA_CMD_ADD commands.
Add a mutex to make sure at most one thread is calling nf_register_net_hooks().
[1]
BUG: KASAN: slab-use-after-free in rht_key_hashfn include/linux/rhashtable.h:159 [inline]
BUG: KASAN: slab-use-after-free in __rhashtable_lookup.constprop.0+0x426/0x550 include/linux/rhashtable.h:604
Read of size 4 at addr fff
drm/amdkfd: Correct the migration DMA map direction
In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Correct the migration DMA map direction
The SVM DMA device map direction should be set the same as
the DMA unmap setting, otherwise the DMA core will report
the following warning.
Before finialize this solution, there're some discussion on
the DMA mapping type(stream-based or coherent) in this KFD
migration case, followed by https://lore.kernel.org/all/04d4ab32
-45a1-4b88-86ee-fb0f35a0ca40@amd.com/T/.
As there's no dma_sync_single_for_*() in the DMA buffer accessed
that because this migration operation should be sync properly and
automatically. Give that there
btrfs: flush delalloc workers queue before stopping cleaner kthread during unmount
In the Linux kernel, the following vulnerability has been resolved:
btrfs: flush delalloc workers queue before stopping cleaner kthread during unmount
During the unmount path, at close_ctree(), we first stop the cleaner
kthread, using kthread_stop() which frees the associated task_struct, and
then stop and destroy all the work queues. However after we stopped the
cleaner we may still have a worker from the delalloc_workers queue running
inode.c:submit_compressed_extents(), which calls btrfs_add_delayed_iput(),
which in turn tries to wake up the cleaner kthread - which was already
destroyed before, resulting in a use-after-free on the task_s
ocfs2: fix slab-use-after-free due to dangling pointer dqi_priv
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix slab-use-after-free due to dangling pointer dqi_priv
When mounting ocfs2 and then remounting it as read-only, a
slab-use-after-free occurs after the user uses a syscall to
quota_getnextquota. Specifically, sb_dqinfo(sb, type)->dqi_priv is the
dangling pointer.
During the remounting process, the pointer dqi_priv is freed but is never
set as null leaving it to be accessed. Additionally, the read-only option
for remounting sets the DQUOT_SUSPENDED flag instead of setting the
DQUOT_USAGE_ENABLED flags. Moreover, later in the process of getting the
next quota, the