scsi: sg: Fix slab-use-after-free read in sg_release()
In the Linux kernel, the following vulnerability has been resolved:
scsi: sg: Fix slab-use-after-free read in sg_release()
Fix a use-after-free bug in sg_release(), detected by syzbot with KASAN:
BUG: KASAN: slab-use-after-free in lock_release+0x151/0xa30
kernel/locking/lockdep.c:5838
__mutex_unlock_slowpath+0xe2/0x750 kernel/locking/mutex.c:912
sg_release+0x1f4/0x2e0 drivers/scsi/sg.c:407
In sg_release(), the function kref_put(&sfp->f_ref, sg_remove_sfp) is
called before releasing the open_rel_lock mutex. The kref_put() call may
decrement the reference count of sfp to zero, triggering its cleanup
through sg_remove_sfp(). This cleanup inc
ocfs2: free inode when ocfs2_get_init_inode() fails
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: free inode when ocfs2_get_init_inode() fails
syzbot is reporting busy inodes after unmount, for commit 9c89fe0af826
("ocfs2: Handle error from dquot_initialize()") forgot to call iput() when
new_inode() succeeded and dquot_initialize() failed.
HID: wacom: fix when get product name maybe null pointer
In the Linux kernel, the following vulnerability has been resolved:
HID: wacom: fix when get product name maybe null pointer
Due to incorrect dev->product reporting by certain devices, null
pointer dereferences occur when dev->product is empty, leading to
potential system crashes.
This issue was found on EXCELSIOR DL37-D05 device with
Loongson-LS3A6000-7A2000-DL37 motherboard.
Kernel logs:
[ 56.470885] usb 4-3: new full-speed USB device number 4 using ohci-pci
[ 56.671638] usb 4-3: string descriptor 0 read error: -22
[ 56.671644] usb 4-3: New USB device found, idVendor=056a, idProduct=0374, bcdDevice= 1.07
[ 56.671647] usb 4-3: Ne
nilfs2: fix potential out-of-bounds memory access in nilfs_find_entry()
In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix potential out-of-bounds memory access in nilfs_find_entry()
Syzbot reported that when searching for records in a directory where the
inode's i_size is corrupted and has a large value, memory access outside
the folio/page range may occur, or a use-after-free bug may be detected if
KASAN is enabled.
This is because nilfs_last_byte(), which is called by nilfs_find_entry()
and others to calculate the number of valid bytes of directory data in a
page from i_size and the page index, loses the upper 32 bits of the 64-bit
size information due to an inappropriate type o
In the Linux kernel, the following vulnerability has been resolved:
bpf: fix OOB devmap writes when deleting elements
Jordy reported issue against XSKMAP which also applies to DEVMAP - the
index used for accessing map entry, due to being a signed integer,
causes the OOB writes. Fix is simple as changing the type from int to
u32, however, when compared to XSKMAP case, one more thing needs to be
addressed.
When map is released from system via dev_map_free(), we iterate through
all of the entries and an iterator variable is also an int, which
implies OOB accesses. Again, change it to be u32.
Example splat below:
[ 160.724676] BUG: unable t
In the Linux kernel, the following vulnerability has been resolved:
xsk: fix OOB map writes when deleting elements
Jordy says:
"
In the xsk_map_delete_elem function an unsigned integer
(map->max_entries) is compared with a user-controlled signed integer
(k). Due to implicit type conversion, a large unsigned value for
map->max_entries can bypass the intended bounds check:
if (k >= map->max_entries)
return -EINVAL;
This allows k to hold a negative value (between -2147483648 and -2),
which is then used as an array index in m->xsk_map[k], which results
in an out-of-bounds access.
spin_lock_bh(&m->lock);
map_entry = &m->xsk_map[k]; // O
af_packet: avoid erroring out after sock_init_data() in packet_create()
In the Linux kernel, the following vulnerability has been resolved:
af_packet: avoid erroring out after sock_init_data() in packet_create()
After sock_init_data() the allocated sk object is attached to the provided
sock object. On error, packet_create() frees the sk object leaving the
dangling pointer in the sock object on return. Some other code may try
to use this pointer and cause use-after-free.
Bluetooth: L2CAP: do not leave dangling sk pointer on error in l2cap_sock_create()
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: do not leave dangling sk pointer on error in l2cap_sock_create()
bt_sock_alloc() allocates the sk object and attaches it to the provided
sock object. On error l2cap_sock_alloc() frees the sk object, but the
dangling pointer is still attached to the sock object, which may create
use-after-free in other code.
net: af_can: do not leave a dangling sk pointer in can_create()
In the Linux kernel, the following vulnerability has been resolved:
net: af_can: do not leave a dangling sk pointer in can_create()
On error can_create() frees the allocated sk object, but sock_init_data()
has already attached it to the provided sock object. This will leave a
dangling sk pointer in the sock object and may cause use-after-free later.
net: ieee802154: do not leave a dangling sk pointer in ieee802154_create()
In the Linux kernel, the following vulnerability has been resolved:
net: ieee802154: do not leave a dangling sk pointer in ieee802154_create()
sock_init_data() attaches the allocated sk object to the provided sock
object. If ieee802154_create() fails later, the allocated sk object is
freed, but the dangling pointer remains in the provided sock object, which
may allow use-after-free.
Clear the sk pointer in the sock object on error.
net: inet: do not leave a dangling sk pointer in inet_create()
In the Linux kernel, the following vulnerability has been resolved:
net: inet: do not leave a dangling sk pointer in inet_create()
sock_init_data() attaches the allocated sk object to the provided sock
object. If inet_create() fails later, the sk object is freed, but the
sock object retains the dangling pointer, which may create use-after-free
later.
Clear the sk pointer in the sock object on error.
net: inet6: do not leave a dangling sk pointer in inet6_create()
In the Linux kernel, the following vulnerability has been resolved:
net: inet6: do not leave a dangling sk pointer in inet6_create()
sock_init_data() attaches the allocated sk pointer to the provided sock
object. If inet6_create() fails later, the sk object is released, but the
sock object retains the dangling sk pointer, which may cause use-after-free
later.
Clear the sock sk pointer on error.
wifi: ath10k: avoid NULL pointer error during sdio remove
In the Linux kernel, the following vulnerability has been resolved:
wifi: ath10k: avoid NULL pointer error during sdio remove
When running 'rmmod ath10k', ath10k_sdio_remove() will free sdio
workqueue by destroy_workqueue(). But if CONFIG_INIT_ON_FREE_DEFAULT_ON
is set to yes, kernel panic will happen:
Call trace:
destroy_workqueue+0x1c/0x258
ath10k_sdio_remove+0x84/0x94
sdio_bus_remove+0x50/0x16c
device_release_driver_internal+0x188/0x25c
device_driver_detach+0x20/0x2c
This is because during 'rmmod ath10k', ath10k_sdio_remove() will call
ath10k_core_destroy() before destroy_workqueue(). wiphy_dev_release()
will finally be called in a
In the Linux kernel, the following vulnerability has been resolved:
jfs: array-index-out-of-bounds fix in dtReadFirst
The value of stbl can be sometimes out of bounds due
to a bad filesystem. Added a check with appopriate return
of error code in that case.
In the Linux kernel, the following vulnerability has been resolved:
jfs: fix shift-out-of-bounds in dbSplit
When dmt_budmin is less than zero, it causes errors
in the later stages. Added a check to return an error beforehand
in dbAllocCtl itself.
In the Linux kernel, the following vulnerability has been resolved:
jfs: fix array-index-out-of-bounds in jfs_readdir
The stbl might contain some invalid values. Added a check to
return error code in that case.
jfs: add a check to prevent array-index-out-of-bounds in dbAdjTree
In the Linux kernel, the following vulnerability has been resolved:
jfs: add a check to prevent array-index-out-of-bounds in dbAdjTree
When the value of lp is 0 at the beginning of the for loop, it will
become negative in the next assignment and we should bail out.
drm/amdgpu: set the right AMDGPU sg segment limitation
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: set the right AMDGPU sg segment limitation
The driver needs to set the correct max_segment_size;
otherwise debug_dma_map_sg() will complain about the
over-mapping of the AMDGPU sg length as following:
WARNING: CPU: 6 PID: 1964 at kernel/dma/debug.c:1178 debug_dma_map_sg+0x2dc/0x370
[ 364.049444] Modules linked in: veth amdgpu(OE) amdxcp drm_exec gpu_sched drm_buddy drm_ttm_helper ttm(OE) drm_suballoc_helper drm_display_helper drm_kms_helper i2c_algo_bit rpcsec_gss_krb5 auth_rpcgss nfsv4 nfs lockd grace netfs xt_conntrack xt_MASQUERADE nf_conntrack_netlink xfrm
wifi: brcmfmac: Fix oops due to NULL pointer dereference in brcmf_sdiod_sglist_rw()
In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: Fix oops due to NULL pointer dereference in brcmf_sdiod_sglist_rw()
This patch fixes a NULL pointer dereference bug in brcmfmac that occurs
when a high 'sd_sgentry_align' value applies (e.g. 512) and a lot of queued SKBs
are sent from the pkt queue.
The problem is the number of entries in the pre-allocated sgtable, it is
nents = max(rxglom_size, txglom_size) + max(rxglom_size, txglom_size) >> 4 + 1.
Given the default [rt]xglom_size=32 it's actually 35 which is too small.
Worst case, the pkt queue can end up with 64 SKBs. This occurs when a new SKB
is added
leds: class: Protect brightness_show() with led_cdev->led_access mutex
In the Linux kernel, the following vulnerability has been resolved:
leds: class: Protect brightness_show() with led_cdev->led_access mutex
There is NULL pointer issue observed if from Process A where hid device
being added which results in adding a led_cdev addition and later a
another call to access of led_cdev attribute from Process B can result
in NULL pointer issue.
Use mutex led_cdev->led_access to protect access to led->cdev and its
attribute inside brightness_show() and max_brightness_show() and also
update the comment for mutex that it should be used to protect the led
class device fields.
Process A Process B
kthread+0x114