p PatchFirst

PatchFirst · Свежие уязвимости

Уязвимости linux-azure-fde-6.2 · Страница 115

За последние 30 дней в linux-azure-fde-6.2 опубликовано уязвимостей: 1109; в каталоге KEV: 0.

RSS ↗ JSON ↗
Фильтры уязвимостей
Сбросить фильтры

Уязвимостей: 18783

  1. CVE-2026-90091

    Высокий · CVSS 8EPSS 0,36%Нет опубликованного исправления

    Bluetooth: L2CAP: fix race l2cap_sock_cleanup_listen() vs. put_chan

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: fix race l2cap_sock_cleanup_listen() vs. put_chan For L2CAP sockets without owning sk->sk_socket, reading l2cap_pi(sk)->chan may race against concurrent l2cap_sock_kill() -> l2cap_sock_put_chan(). This excludes simultaneous proto_ops callbacks, but access in l2cap_sock_cleanup_listen() has unsafe lockless read. [Task 1] [Task 2 (hdev->workqueue)] l2cap_sock_release(parent) l2cap_disconn_cfm l2cap_sock_cleanup_listen l2cap_conn_del bt_accept_dequeue l2cap_chan_del lock_sock(sk)

    linux-azure-fde-6.2Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  2. CVE-2026-90090

    Средний · CVSS 4.8EPSS 0,21%Нет опубликованного исправления

    Bluetooth: btmtksdio: Fix out-of-bounds DMA read in the TX path

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btmtksdio: Fix out-of-bounds DMA read in the TX path btmtksdio_tx_packet() rounds the transfer size up to the SDIO block size of 256 bytes, but hands the host controller the SKB buffer as is: err = sdio_writesb(bdev->func, MTK_REG_CTDR, skb->data, round_up(skb->len, MTK_SDIO_BLOCK_SIZE)); Only skb->len bytes hold packet data, so the controller reads up to 255 bytes of uninitialised memory and sends it to the device over the SDIO bus. Depending on how much tailroom slack the SKB allocation happens to carry, that read can also extend past the end of the bu

    linux-azure-fde-6.2Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  3. CVE-2026-90089

    Высокий · CVSS 7.1EPSS 0,33%Нет опубликованного исправления

    Bluetooth: btnxpuart: Validate the FW dump header length

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btnxpuart: Validate the FW dump header length nxp_process_fw_dump() pulls the ACL header off the frame and then reads seq_num and buf_len from a struct nxp_fw_dump_hdr placed at skb->data, without checking that the ACL payload is long enough to contain it. h4_recv_buf() collects HCI_ACL_HDR_SIZE bytes of header followed by the number of payload bytes named in that header, so skb->len is 4 + dlen with dlen supplied by the controller and possibly smaller than the 8 byte dump header, or zero. A short frame with connection handle 0xfff therefore reads both fields fr

    linux-azure-fde-6.2Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  4. CVE-2026-90088

    Без оценкиEPSS 0,22%Нет опубликованного исправления

    Bluetooth: RFCOMM: Validate MTU in rfcomm_apply_pn() to prevent infinite loop

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: Validate MTU in rfcomm_apply_pn() to prevent infinite loop rfcomm_apply_pn() accepts the MTU value from a remote PN (Parameter Negotiation) frame without checking for zero. When the remote peer sends an MTU of zero, d->mtu is set to 0. This causes the sendmsg path to enter an infinite loop when fragmenting data, as each fragment has size == min_t(size_t, len, 0) == 0, so the remaining length never decreases. The infinite allocation of zero-length skbs exhausts all system memory. Fix by clamping d->mtu to RFCOMM_DEFAULT_MTU when the negotiated value is ze

    linux-azure-fde-6.2Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  5. CVE-2026-90087

    Средний · CVSS 6.8EPSS 0,21%Нет опубликованного исправления

    Bluetooth: do not leak an hci_conn when a second LE connect is rejected

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: do not leak an hci_conn when a second LE connect is rejected create_le_conn_complete() decides whether the failed connection is still pending by comparing it against hci_lookup_le_connect(), which returns the first LE connection in BT_CONNECT. That is the same connection only while at most one is pending. Two can be pending. Connections created on the passive scan path sit in BT_CONNECT with HCI_CONN_SCANNING set and are invisible to hci_lookup_le_connect() until hci_le_create_conn_sync() clears the flag when their command is issued, so the -EBUSY guard in hci_c

    linux-azure-fde-6.2Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  6. CVE-2026-90086

    Средний · CVSS 4.6EPSS 0,21%Нет опубликованного исправления

    xsk: honor XDP_TX_METADATA in zero-copy path

    In the Linux kernel, the following vulnerability has been resolved: xsk: honor XDP_TX_METADATA in zero-copy path The zero-copy path reads TX metadata whenever the UMEM has metadata space, even if the descriptor does not set XDP_TX_METADATA. Pass descriptor options through the metadata helpers and ignore metadata unless the option is set. This does not fix the existing per-WQE metadata handling for mlx5 MPWQEs. Only the descriptor that starts a session passes through xsk_tx_metadata_request() and configures offload state shared by the batch. Metadata on descriptors joining an open session is therefore not validated and does not configure it

    linux-azure-fde-6.2Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  7. CVE-2026-90085

    Без оценкиEPSS 0,21%Нет опубликованного исправления

    octeontx2-af: fix NULL deref in NIX TM tree debugfs read path

    In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: fix NULL deref in NIX TM tree debugfs read path rvu_dbg_nix_tm_tree_display() dereferences pfvf->sq_ctx without checking whether the SQ context has been allocated. Reading /sys/kernel/debug/octeontx2/nix/tm_tree for a NIX LF whose transmit queues are not set up triggers a kernel oops. Guard the read path the same way rvu_dbg_nix_tm_tree_write() already does and return -EINVAL with a seq_file message when sq_ctx is NULL.

    linux-azure-fde-6.2Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  8. CVE-2026-90084

    Без оценкиEPSS 0,21%Нет опубликованного исправления

    octeontx2-vf: fix workqueue and netdev race in probe/remove

    In the Linux kernel, the following vulnerability has been resolved: octeontx2-vf: fix workqueue and netdev race in probe/remove Initialize the VF workqueue before register_netdev() so ndo_set_rx_mode does not queue work on a NULL workqueue. Unregister the netdev before destroying the workqueue, and add proper probe error cleanup.

    linux-azure-fde-6.2Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  9. CVE-2026-90083

    Средний · CVSS 6.8EPSS 0,21%Нет опубликованного исправления

    net/sched: act_ife: Only operate on Ethernet frames

    In the Linux kernel, the following vulnerability has been resolved: net/sched: act_ife: Only operate on Ethernet frames act_ife encapsulates/decapsulates the original Ethernet header and uses skb->dev->hard_header_len as the length of that header. That is only correct for Ethernet devices: on a device where hard_header_len does not match the L2 header that was actually pulled (PPP reports PPP_HDRLEN while nothing is stripped on ingress), the ingress skb_push()/skb_pull() use the wrong length and can hit skb_under_panic when headroom is tight. IFE is Ethernet-only by design - it builds an outer ethhdr, rewrites h_source/h_dest/h_proto, and

    linux-azure-fde-6.2Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  10. CVE-2026-90082

    Без оценкиEPSS 0,21%Нет опубликованного исправления

    net: mana: Cap MSI-X vectors to the device MSI-X table size

    In the Linux kernel, the following vulnerability has been resolved: net: mana: Cap MSI-X vectors to the device MSI-X table size mana_gd_query_max_resources() sizes gc->num_msix_usable from resp.max_msix and the CPU count, but never from the device MSI-X table. On a 1792 vCPU M-series VM that yields 1793 while the table has 1024 entries, and mana_gd_setup_remaining_irqs() then walks indices 1..1792, running off the end of the region mapped by msix_map_region(): BUG: unable to handle page fault for address: ff8e347f8b99800c RIP: 0010:msix_prepare_msi_desc+0x7a/0x90 RAX: 0000000000004000 RBX: ff4330cb164ea780 RCX: ff8e347f8b998000 Cal

    linux-azure-fde-6.2Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  11. CVE-2026-90081

    Без оценкиEPSS 0,22%Нет опубликованного исправления

    net/rds: use wq_has_sleeper() in rds_cong_map_updated()

    In the Linux kernel, the following vulnerability has been resolved: net/rds: use wq_has_sleeper() in rds_cong_map_updated() rds_cong_map_updated() runs after a peer's congestion map has been rewritten (by rds_tcp_cong_recv() and rds_ib_cong_recv(), or the clear-all in the loopback and IB send-completion paths). It bumps rds_cong_generation and then checks waitqueue_active() on map->m_waitq and on rds_poll_waitq to decide whether anyone needs waking. atomic_inc() carries no ordering and waitqueue_active() is a plain load, so nothing orders the map and generation stores before the wait queue reads. The waiters do the mirror image: rds_cong

    linux-azure-fde-6.2Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  12. CVE-2026-90080

    Без оценкиEPSS 0,21%Нет опубликованного исправления

    octeontx2-pf: fix NULL deref of af_xdp_zc_qidx on rep setup

    In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: fix NULL deref of af_xdp_zc_qidx on rep setup af_xdp_zc_qidx tracks receive queues using AF_XDP zero-copy and is allocated during PF/VF probe. Representors and other non-AF_XDP paths leave the pointer NULL, but several call sites used test_bit() on it unconditionally. Switching to devlink eswitch mode creates representors and runs otx2_init_hw_resources(), which reaches otx2_pool_aq_init() and oopses when dereferencing the NULL bitmap. Add NULL checks before every af_xdp_zc_qidx test_bit() use in the RSS, ethtool, XSK, and pool init paths.

    linux-azure-fde-6.2Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  13. CVE-2026-90079

    Без оценкиEPSS 0,21%Нет опубликованного исправления

    octeontx2-af: fix cn20k mailbox lifetime on repeated rvu_mbox_init()

    In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: fix cn20k mailbox lifetime on repeated rvu_mbox_init() rvu_mbox_init() is called separately for AF-PF mailboxes during probe and for AF-VF mailboxes when SR-IOV is enabled. Each call used to allocate a new ng_rvu object, leaking the first allocation when the pointer was overwritten on the second call. Sharing one ng_rvu across both paths exposed several teardown bugs: the error path freed all cn20k mailbox DMA and kfree()d ng_rvu even when only the failing init type should be unwound, leaving live AF-PF mailbox memory in use after an AF-VF init failure. mut

    linux-azure-fde-6.2Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  14. CVE-2026-90078

    Без оценкиEPSS 0,21%Нет опубликованного исправления

    net/sched: act_skbmod: fix length calculations and avoid invalid header warnings

    In the Linux kernel, the following vulnerability has been resolved: net/sched: act_skbmod: fix length calculations and avoid invalid header warnings syzbot reported a warning in skb_network_header_len() triggered by tcf_skbmod_act(): !skb_transport_header_was_set(skb) WARNING: CPU: 0 PID: 14949 at include/linux/skbuff.h:3243 skb_network_header_len include/linux/skbuff.h:3243 [inline] WARNING: CPU: 0 PID: 14949 at net/sched/act_skbmod.c:55 tcf_skbmod_act+0xfe8/0x1810 net/sched/act_skbmod.c:55 There are a few issues in tcf_skbmod_act(): 1. Calling skb_network_header_len() assumes skb->transport_header is set, which is not guarante

    linux-azure-fde-6.2Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  15. CVE-2026-90077

    Без оценкиEPSS 0,21%Нет опубликованного исправления

    net: fix a resource leak in copy_net_ns() error handling path

    In the Linux kernel, the following vulnerability has been resolved: net: fix a resource leak in copy_net_ns() error handling path Currently, preinit_net() does two things: (1) call ns_common_init() which might fail (2) initialize resources which does not fail However, preinit_net() is returning early when (1) fails, and copy_net_ns() is jumping to the dec_ucounts: label. As a result, resources allocated by net_alloc() are leaking. We need to call key_remove_domain() and net_passive_dec() in order to release resources allocated by net_alloc(). We cannot simply jump to the put_userns: label when preinit_net() failed, for (2) is not yet

    linux-azure-fde-6.2Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  16. CVE-2026-90076

    Средний · CVSS 6.8EPSS 0,21%Нет опубликованного исправления

    net/sched: fq: add overflow bounds to quantum and initial quantum

    In the Linux kernel, the following vulnerability has been resolved: net/sched: fq: add overflow bounds to quantum and initial quantum fq_init() computes quantum = 2 * psched_mtu() and initial_quantum = 10 * psched_mtu() with no overflow check. A device with a huge MTU (e.g. dummy with max_mtu == 0 accepting MTU 2147483634) makes psched_mtu() return 0x80000000; the 2 * and 10 * multiplications wrap to 0 in 32-bit arithmetic, so q->quantum == 0. Then in fq_dequeue() the credit-refill loop adds 0 to f->credit (which stays <= 0) and goto begin loops forever under the qdisc lock, creating a soft lockup. Clamp psched_mtu() to [1, 1 << 20] before

    linux-azure-fde-6.2Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  17. CVE-2026-90075

    Без оценкиEPSS 0,22%Нет опубликованного исправления

    net/sched: fq_codel: clamp default quantum and mtu

    In the Linux kernel, the following vulnerability has been resolved: net/sched: fq_codel: clamp default quantum and mtu fq_codel_init() sets q->quantum = psched_mtu(qdisc_dev(sch)) without clamping. A device with a huge MTU (e.g. dummy with max_mtu == 0 accepting MTU 2147483634) makes psched_mtu() return 0x80000000, which overflows the signed flow->deficit to INT_MIN in fq_codel_dequeue(), causing an infinite loop and soft lockup. Emulate fq_codel_change() and constrain to [256, FQ_CODEL_QUANTUM_MAX]. The same unclamped psched_mtu() is assigned to q->cparams.mtu a bit below, and fq_codel_change() never updates it. codel_should_drop() tests

    linux-azure-fde-6.2Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  18. CVE-2026-90074

    Без оценкиEPSS 0,22%Нет опубликованного исправления

    net/sched: fq_pie: clamp default quantum to avoid signed overflow

    In the Linux kernel, the following vulnerability has been resolved: net/sched: fq_pie: clamp default quantum to avoid signed overflow fq_pie_init() sets q->quantum = psched_mtu(qdisc_dev(sch)) without clamping. A device with a huge MTU (e.g. dummy with max_mtu == 0 accepting MTU 2147483634) makes psched_mtu() return 0x80000000, which overflows the signed flow->deficit to INT_MIN in fq_pie_qdisc_dequeue(), causing an infinite loop and soft lockup. Emulate fq_pie_policy which is already bounded to [1, 1 << 20]; clamp the default to [256, 1 << 20]. 256 matches fq_codel's floor and is a sane minimum for a DRR quantum. Conditions to recreate th

    linux-azure-fde-6.2Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  19. CVE-2026-90073

    Без оценкиEPSS 0,22%Нет опубликованного исправления

    net/sched: hhf: clamp quantum before hhf_change() to avoid overflow

    In the Linux kernel, the following vulnerability has been resolved: net/sched: hhf: clamp quantum before hhf_change() to avoid overflow hhf_init() sets q->quantum = psched_mtu(qdisc_dev(sch)) with no overflow check. A device with a huge MTU (e.g. dummy with max_mtu == 0 accepting MTU 2147483634) makes weight * quantum overflow the signed deficit in hhf_dequeue(), spinning forever. Clamp q->quantum before hhf_change() so both the opt and !opt paths see a sane quantum. Without this, bare "tc qdisc add ... hhf" succeeds with a clamped quantum but "tc qdisc add ... hhf limit 1000" (any option present) fails with -EINVAL because hhf_change() re

    linux-azure-fde-6.2Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  20. CVE-2026-90072

    Без оценкиEPSS 0,22%Нет опубликованного исправления

    net/sched: sfq: clamp quantum to avoid signed overflow soft lockup

    In the Linux kernel, the following vulnerability has been resolved: net/sched: sfq: clamp quantum to avoid signed overflow soft lockup sfq_init() sets q->quantum = psched_mtu(qdisc_dev(sch)) (unsigned). A device with a huge MTU (e.g. dummy with max_mtu == 0 accepting MTU 2147483634) makes psched_mtu() return 0x80000000, so slot->allot = INT_MIN and INT_MIN + INT_MIN toggles between INT_MIN and 0 forever, spinning sfq_dequeue() under the qdisc lock. Clamp the quantum to [256, 1 << 20] so the refill loop terminates. The lower bound also covers q->quantum == 0 (psched_mtu() returning 0), which spins sfq_dequeue() identically. sfq_change() alr

    linux-azure-fde-6.2Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

Проверьте свой сервер

Сопоставьте установленный стек и версии со свежими базами уязвимостей.

Проверьте свой сервер →