Уязвимости linux-gke · Страница 82

ocfs2: bound namelen in dlm_migrate_request_handler

In the Linux kernel, the following vulnerability has been resolved: ocfs2: bound namelen in dlm_migrate_request_handler Patch series "ocfs2/dlm: bound peer-controlled lengths in the o2dlm". The o2dlm receive handlers trust u8 length and count fields from the wire without bounding them, so a node in a DLM domain can corrupt or panic any other node with a malformed message. Three defects: - dlm_migrate_request_handler() passes migrate->namelen unchecked to dlm_init_mle(), which memcpy()s it into the 32-byte mname[] of an o2dlm_mle slab object: a heap out-of-bounds write of up to ~215 attacker-controlled bytes. - dlm_mig_lo

• Обновитесь до 5.15.0-1115.121

ocfs2: validate lengths in dlm_mig_lockres_handler

In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate lengths in dlm_mig_lockres_handler A node receiving a DLM_MIG_LOCKRES message trusts several fields of the peer-supplied dlm_migratable_lockres without validation. num_locks and lockname_len are bounded only on the sending side, and the message is never checked to actually carry num_locks migratable_lock entries. As a result dlm_process_recovery_data() walks mres->ml[0..num_locks) past the kmalloc(data_len) copy of the message (an out-of-bounds read that ends in a BUG_ON panic), and dlm_init_lockres() copies lockname_len bytes into the fixed 32-byte o2dlm_

• Обновитесь до 5.15.0-1115.121

ocfs2: validate rl_used against rl_count in refcount block validator

In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate rl_used against rl_count in refcount block validator ocfs2_find_refcount_rec_in_rl() walks the on-disk refcount record array with: for (; i < le16_to_cpu(rb->rf_records.rl_used); i++) { rec = &rb->rf_records.rl_recs[i]; ... rl_recs[] lives in a single metadata block (4096 bytes on the common configuration), so its real capacity is fixed by ocfs2_refcount_recs_per_rb(sb) (247 records for a 4K block with the 16-byte ocfs2_refcount_rec). rl_used and rl_count are both read directly off disk by ocfs2_validate_refcount_block() and are never checked against

• Обновитесь до 5.15.0-1115.121

ocfs2: validate directory-index entry counts when reading metadata

In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate directory-index entry counts when reading metadata ocfs2_validate_dx_leaf() and ocfs2_validate_dx_root() check the ECC and signature of an indexed-directory block before it reaches higher-level callers, but neither validator bounds the ocfs2_dx_entry_list counts against the capacity of the block that holds them. ocfs2_dx_dir_search() then walks for (i = 0; i < le16_to_cpu(entry_list->de_num_used); i++) dx_entry = &entry_list->de_entries[i]; over de_num_used entries with no bounds check. entry_list is either dx_leaf->dl_list (from ocfs2_read_dx_leaf) o

ocfs2: cluster: don't sleep while holding o2hb_live_lock in o2hb_region_pin()

In the Linux kernel, the following vulnerability has been resolved: ocfs2: cluster: don't sleep while holding o2hb_live_lock in o2hb_region_pin() Patch series "ocfs2: cluster: o2hb_region_pin() fixes", v2. This series fixes three related issues in o2hb_region_pin(), all are from the original implementation in commit: 58a3158a5d17 ("ocfs2/cluster: Pin/unpin o2hb regions"): 1) It is called with o2hb_live_lock (a spinlock) held, but the underlying configfs_depend_item() sleeps (takes inode rwsem and pins the filesystem). This triggers BUG under CONFIG_DEBUG_ATOMIC_SLEEP. 2) When called from the configfs drop_item callback, it crea

• Обновитесь до 5.15.0-1115.121

ocfs2: fix readdir position truncation on 32-bit kernels

In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix readdir position truncation on 32-bit kernels In ocfs2_dir_foreach_blk_el(), the directory cookie position is rebuilt with ctx->pos = (ctx->pos & ~(sb->s_blocksize - 1)) | offset; `ctx->pos` is loff_t (signed 64-bit), while `sb->s_blocksize` is unsigned long. On 32-bit kernels unsigned long is 32-bit, so the mask ~(sb->s_blocksize - 1) is computed as a 32-bit unsigned value (e.g. 0xfffff000 for a 4 KiB block size). In the AND expression with the 64-bit `ctx->pos`, that unsigned operand is zero-extended to 64 bits per the usual arithmetic conversions, yiel

• Обновитесь до 5.15.0-1115.121

openrisc: fix arbitrary kernel memory access via or1k_atomic syscall

In the Linux kernel, the following vulnerability has been resolved: openrisc: fix arbitrary kernel memory access via or1k_atomic syscall sys_or1k_atomic() (syscall 244 in the "or1k" ABI) takes two user pointers, v1 and v2, and swaps the words they point to in hand-written assembly. l.lwz r29,0(r4) l.lwz r27,0(r5) l.sw 0(r4),r27 l.sw 0(r5),r29 The pointers are not checked with access_ok(). The four memory accesses also have no exception table entries. A caller passes a kernel address as either pointer, and the syscall reads from and writes to it directly. This gives an unprivileged process a kernel read/write pr

• Обновитесь до 5.15.0-1115.121

openvswitch: Fix CT limit teardown use-after-free

In the Linux kernel, the following vulnerability has been resolved: openvswitch: Fix CT limit teardown use-after-free Packet processing uses CT limit state under RCU, while netns teardown frees that state under ovs_mutex. The CT limit pointer was neither removed from readers nor protected by a grace period, allowing packet processing to dereference the freed state. An unprivileged user can trigger this bug from a user and network namespace, causing a slab-use-after-free in ovs_ct_execute() when the netns is torn down. Publish the CT limit pointer through RCU, remove it before teardown, and wait for readers before freeing its contents. Kee

• Обновитесь до 5.15.0-1115.121

openvswitch: only skb_tx_error() a packet we are about to drop

In the Linux kernel, the following vulnerability has been resolved: openvswitch: only skb_tx_error() a packet we are about to drop queue_userspace_packet() borrows the packet skb -- it only copies it into a private netlink message (user_skb) and does not own it; on return do_execute_actions() keeps forwarding it through the flow's remaining actions. Its error path nevertheless calls skb_tx_error(skb), which via skb_zcopy_clear() does skb_shinfo(skb)->flags &= ~SKBFL_ALL_ZEROCOPY, stripping SKBFL_SHARED_FRAG from that live skb (skb_tx_error()'s kerneldoc says "skb must be freed afterwards"). For a MSG_ZEROCOPY skb carrying page-cache frags,

• Обновитесь до 5.15.0-1115.121

lockd: pin next file across nlm_inspect_file lock-drop

In the Linux kernel, the following vulnerability has been resolved: lockd: pin next file across nlm_inspect_file lock-drop nlm_traverse_files() pins the current file with f_count++ across a mutex_unlock for nlm_inspect_file(), but nothing pins the saved next pointer. A concurrent nlm_release_file() can kfree the next file during the unlock window, and the iterator dereferences freed memory on the next loop step. Pin both current and next before the lock-drop. Advance by swapping the pinned cursors at the end of each iteration so next is always held alive across the unlock. Always call nlm_file_release() after dropping the iteration pin,

• Обновитесь до 5.15.0-1115.121

lockd: fix NULL dereference on lockowner allocation failure

In the Linux kernel, the following vulnerability has been resolved: lockd: fix NULL dereference on lockowner allocation failure nlmclnt_locks_init_private() installs NLM file lock operations even when nlmclnt_find_lockowner() fails to allocate a lockowner. nlmclnt_proc() then returns -ENOMEM, but the VFS still tears down the partially initialized file_lock and calls locks_release_private(). That invokes nlmclnt_locks_release_private(), which dereferences fl->fl_u.nfs_fl.owner and crashes because the owner was never installed. Clear fl_ops before attempting to initialize the NLM private state, and install the NLM lock operations only after

nvme: zero the discard fallback page

In the Linux kernel, the following vulnerability has been resolved: nvme: zero the discard fallback page nvme_setup_discard() always maps sizeof(struct nvme_dsm_range) * NVME_DSM_MAX_RANGES = 4096 bytes as the DSM payload however many ranges the command declares, because some devices ignore the 'Number of Ranges' field - the Fixes: commit records two that read past the declared ranges. A single-range discard fills only the first 16 bytes. Normally the buffer comes from kzalloc() and the other 4080 bytes are zero. When that allocation fails the code falls back to the per-controller ctrl->discard_page, which nvme_init_ctrl() obtains with al

• Обновитесь до 5.15.0-1115.121

nvme-tcp: do not accept C2HData based on blk_rq_payload_bytes() alone

In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: do not accept C2HData based on blk_rq_payload_bytes() alone Commit 25e5cb780e62 ("nvme-tcp: fix possible crash in write_zeroes processing") established that blk_rq_payload_bytes() must not be read without first checking blk_rq_nr_phys_segments(), and recorded the result in nvme_tcp_setup_cmd_pdu() as req->data_len. The receive side was left as it was. The two differ for REQ_OP_WRITE_ZEROES, which has no physical segments but a non-zero blk_rq_bytes(), so setup leaves req->iter untouched while the receive gate lets a C2HData through and nvme_tcp_recv_data() copies

• Обновитесь до 5.15.0-1115.121

nvme-tcp: fix host memory disclosure on R2T for a read command

In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: fix host memory disclosure on R2T for a read command nvme_tcp_handle_r2t() does not check the direction of the request the R2T refers to. A malicious controller can send an R2T for a READ and the host will answer it: nvme_tcp_setup_h2c_data_pdu() builds the H2CData header and nvme_tcp_try_send_data() sends the request's data buffer. That buffer is the READ destination, so its contents go to the controller. The command then completes normally and nothing is logged. Against a test controller that answers every READ with an R2T, a 4096 byte buffered read returned a

nvme-tcp: reject a read that transferred too few bytes

In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: reject a read that transferred too few bytes nvme_tcp_recv_data() completes a request once the current C2HData PDU has been consumed. Nothing compares the total bytes received against the length the command asked for: struct nvme_tcp_request has no receive-side counter, queue->data_remaining is per queue, and blk_mq_end_request() completes for blk_rq_bytes(rq) unconditionally with no residual concept anywhere above. A controller can therefore answer a 4096-byte read with 512 bytes and have it reported as a complete read; user space then gets 4096 bytes of which 3

• Обновитесь до 5.15.0-1115.121

sctp: stop processing a packet once its association is deleted

In the Linux kernel, the following vulnerability has been resolved: sctp: stop processing a packet once its association is deleted sctp_endpoint_bh_rcv() looks the association up only when chunk->asoc is NULL, and caches the result in chunk->asoc and chunk->transport without taking a reference. A packet that matches no association is handed to the endpoint, so a peer can bundle COOKIE ECHO, SHUTDOWN and SHUTDOWN ACK in one packet. The COOKIE ECHO creates the association, the SHUTDOWN chunk caches it, and with the outqueue empty the SHUTDOWN ACK reaches sctp_sf_do_9_2_final(), so the association and its transports are freed. The endpoint l

• Обновитесь до 5.15.0-1115.121

sctp: drop a chunk if its transport was removed

In the Linux kernel, the following vulnerability has been resolved: sctp: drop a chunk if its transport was removed sctp_rcv() resolves the transport once per packet and leaves it in chunk->transport. The lookup reference, or the one sctp_add_backlog() takes if the socket is owned by userspace, keeps it around until the chunk has been processed. An authenticated ASCONF DEL-IP can remove it in the meantime. sctp_assoc_rm_peer() takes the transport out of the association and calls sctp_transport_free(), which tags it dead and drops the reference the association held. There is a window on both paths: the packet can sit on the socket backlog,

• Обновитесь до 5.15.0-1115.121

sctp: fix NULL deref on untransmitted RECONF completion

In the Linux kernel, the following vulnerability has been resolved: sctp: fix NULL deref on untransmitted RECONF completion sctp_process_strreset_outreq(), sctp_process_strreset_addstrm_out() and sctp_process_strreset_resp() complete a pending stream reconfiguration request by stopping the reconf timer on the transport it was sent on: t = asoc->strreset_chunk->transport; if (timer_delete(&t->reconf_timer)) sctp_transport_put(t); chunk->transport is assigned by __sctp_packet_append_chunk() when the chunk is appended to an outbound packet, and sctp_outq_flush_ctrl() arms the reconf timer at that same point. A request already published i

• Обновитесь до 5.15.0-1115.121

sctp: fix stream->outcnt underflow on duplicate RECONF responses

In the Linux kernel, the following vulnerability has been resolved: sctp: fix stream->outcnt underflow on duplicate RECONF responses A cached RECONF chunk may contain more than one request parameter. A duplicate response can therefore find and process the same ADD_OUT request again while another parameter is still outstanding, rolling back outcnt twice and possibly underflowing it. Track outstanding request types as bits and clear each bit after its first response. Later responses for the same request are then ignored.

• Обновитесь до 5.15.0-1115.121

power: supply: bq24257: fix use-after-free on remove

In the Linux kernel, the following vulnerability has been resolved: power: supply: bq24257: fix use-after-free on remove The STAT-pin interrupt is devm-managed, so it stays armed until the devm cleanup that runs after remove() returns. remove() cancels bq->iilimit_setup_work while the threaded handler can still fire; that handler reschedules the work and dereferences bq, so the work runs against freed memory once devm frees bq. Make the delayed work device-managed with devm_delayed_work_autocancel(), registered before the interrupt request. The devm cleanup then releases the interrupt first, so the handler can no longer reschedule the work

• Обновитесь до 5.15.0-1115.121