Уязвимости linux-gke · Страница 86

wifi: rtw88: Fix potential memory leak in rtw_txq_push_skb()

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: Fix potential memory leak in rtw_txq_push_skb() The skb passed to the rtw_hci_tx_write() is expected to be freed when the function fails, but the error path in rtw_txq_push_skb() does not free the skb before returning. This can lead to a memory leak in rtw_txq_push() where a dequeued skb is passed to rtw_txq_push_skb().

• Обновитесь до 5.15.0-1115.121

wifi: mt76: mt7615: avoid waiting for mac work under the mt76 mutex

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7615: avoid waiting for mac work under the mt76 mutex mt7615_suspend() acquired the mt76 mutex and then called cancel_delayed_work_sync() on mac_work. mt7615_mac_work() acquires the same mutex via mt7615_mutex_acquire() at the top of the worker, so if mac_work is already running and blocked on the mutex, the suspend path deadlocks waiting for the work it holds the mutex against. Flush scan_work and mac_work before taking the mutex, matching the suspend paths in mt7921 and mt7925. scan_work only takes the mt76 spinlock, but moving it keeps the sequence consi

• Обновитесь до 5.15.0-1115.121

wifi: mt76: mt7915: bound the device EEPROM address before the EFUSE copy

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: bound the device EEPROM address before the EFUSE copy mt7915_mcu_get_eeprom() copies a fixed EFUSE block into the driver's dev->mt76.eeprom.data buffer at the offset reported by the MCU response (res->addr, a device-controlled __le32) without checking it against the buffer size. A malicious or malfunctioning device can report an arbitrary address and drive a 16-byte out-of-bounds write past eeprom.data. Reject a response whose address would place the copy outside eeprom.data before deriving the destination pointer. Devices that echo the requested in-bou

vsock/virtio: flush works in dependency order

In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: flush works in dependency order virtio_vsock_remove() stops the virtqueues and then flushes each work item before freeing the enclosing virtio_vsock. The current order does not account for dependencies between those items: tx_work may queue send_pkt_work, and send_pkt_work may queue rx_work. In particular, send_pkt_work can set restart_rx and release tx_lock. The remove path can then stop the queues and flush rx_work before send_pkt_work queues it. Although the later send_pkt_work flush waits for that producer to finish, nothing waits for the newly queued r

• Обновитесь до 5.15.0-1115.121

w1: ds28e17: reject an oversize length on an I2C block read

In the Linux kernel, the following vulnerability has been resolved: w1: ds28e17: reject an oversize length on an I2C block read w1_f19_i2c_master_transfer() is the master_xfer for the DS28E17 1-Wire to I2C bridge. On an I2C_M_RECV_LEN read, it takes the length from the device. The downstream slave puts a length byte in buf[0]. The driver then reads that many bytes into buf[1] with w1_f19_i2c_read(). buf[0] is controlled by the device and can be 0 to 255. w1_f19_i2c_read() only rejects a zero count. The caller buffer is I2C_SMBUS_BLOCK_MAX + 2, so 34 bytes. A length above 32 makes the read run past it, up to about 222 bytes out of bounds.

• Обновитесь до 5.15.0-1115.121

tpm: tpm_i2c_nuvoton: disable IRQ on wait timeout

In the Linux kernel, the following vulnerability has been resolved: tpm: tpm_i2c_nuvoton: disable IRQ on wait timeout i2c_nuvoton_wait_for_stat() enables the IRQ before waiting for the interrupt handler to report a status change. If the wait times out, or is interrupted before the handler runs, the function returns without balancing the enable_irq() call. Disable the IRQ before leaving the failed wait path. Also preserve an interrupted wait's original error code instead of converting it to -ETIMEDOUT inside the helper.

• Обновитесь до 5.15.0-1115.121

smack: fix cred UAF in smack_file_send_sigiotask()

In the Linux kernel, the following vulnerability has been resolved: smack: fix cred UAF in smack_file_send_sigiotask() When inspecting the credentials of another task, objective credentials (->real_cred, accessed with __task_cred()) must always be used. Accessing ->cred on a non-current task is forbidden unless that task is being created or destroyed; a task is allowed to change its own ->cred pointer with no synchronization, and changing ->cred should only affect the current syscall. smack_file_send_sigiotask() was accessing both sets of credentials: First tsk->cred, then __task_cred(tsk). Fix it, always access the objective credentials

• Обновитесь до 5.15.0-1115.121

vlan: fix skb_under_panic and races when toggling HW VLAN offload

In the Linux kernel, the following vulnerability has been resolved: vlan: fix skb_under_panic and races when toggling HW VLAN offload Toggling hardware VLAN TX offload (NETIF_F_HW_VLAN_CTAG_TX or NETIF_F_HW_VLAN_STAG_TX) on a lower device invokes vlan_transfer_features(), which dynamically changed vlandev->hard_header_len. This causes two issues: 1. Lockless TX paths (e.g. packet_snd in af_packet.c, ip6_finish_output2) read dev->hard_header_len without holding RTNL lock. Mutating hard_header_len dynamically under RTNL creates a data race where upper layers reserve insufficient headroom based on a stale hard_header_len, resultin

xhci: dbgtty: Fix unregister on tty_register_driver() failure

In the Linux kernel, the following vulnerability has been resolved: xhci: dbgtty: Fix unregister on tty_register_driver() failure If tty_register_driver() fails, it drops the reference, but fails to set the global dbc_tty_driver to NULL, causing the unregister to be called again when module exits. On module unload dbc_tty_exit() only gates its cleanup on the driver pointer being non-NULL, so it operates on the already-freed driver: module_init(xhci_hcd_init) xhci_hcd_init() xhci_dbc_init() [return value ignored] dbc_tty_init() tty_register_driver() fails tty_drive

• Обновитесь до 5.15.0-1115.121

KVM: s390: vsie: zero stale crypto bits

In the Linux kernel, the following vulnerability has been resolved: KVM: s390: vsie: zero stale crypto bits When shadowing crypto access bits from a format0 apcb (crycb 0 or 1), the bits 64..255 are unchanged from whatever is in the vsie page in the crycb and thus in the apcb. This gives a nested guest potential access to a device no longer available. Zero out the remaining bits.

• Обновитесь до 5.15.0-1115.121

HID: core: fix number/pointer type confusion on long items

In the Linux kernel, the following vulnerability has been resolved: HID: core: fix number/pointer type confusion on long items When fetch_item() is called by hid_scan_report() on an item with HID_ITEM_TAG_LONG, it stores a pointer to the item data in item->data.longdata instead of storing a value directly in item->data.{u8/u16/u32}. When item_udata() or item_sdata() encounters such an item, it incorrectly assumes that the item is in short format, and therefore returns the lower part of a kernel pointer reinterpreted as a number. When a HID device is connected whose descriptor contains a HID_GLOBAL_ITEM_TAG_REPORT_SIZE encoded in long form

• Обновитесь до 5.15.0-1115.121

PCI: host-generic: Fix NULL pointer dereference on 32-bit CAM systems

In the Linux kernel, the following vulnerability has been resolved: PCI: host-generic: Fix NULL pointer dereference on 32-bit CAM systems On 32-bit systems the config space is too large to ioremap in one go, so pci_ecam_create() maps each bus segment separately and relies on the ->add_bus callback (pci_ecam_add_bus) to populate the per-bus mapping in cfg->winp[]. pci_ecam_map_bus() then uses that mapping as the base for every config access. The generic ECAM ops (pci_generic_ecam_ops) already provide the ->add_bus and ->remove_bus callbacks, but the CAM (legacy) ops in pci-host-generic.c do not. As a result, on a 32-bit host using "pci-host

• Обновитесь до 5.15.0-1115.121

kcov: fix data corruption and race conditions on PREEMPT_RT

In the Linux kernel, the following vulnerability has been resolved: kcov: fix data corruption and race conditions on PREEMPT_RT syzbot is reporting KCOV state corruption on PREEMPT_RT kernels, for the temporary storage used for saving/restoring remote KCOV state is currently allocated as the per-CPU area. On PREEMPT_RT kernels, softirq handlers run as preemptible task threads (e.g., ksoftirqd). If a softirq context preempts a task running a remote KCOV session, it safely saves the task's state into the per-CPU area. However, if that softirq thread is subsequently preempted by a higher- priority softirq thread on the same CPU, the second so

• Обновитесь до 5.15.0-1115.121

selinux: require every boolean value to be defined

In the Linux kernel, the following vulnerability has been resolved: selinux: require every boolean value to be defined p_bools.nprim comes from the policy image independently of how many booleans follow it, and cond_index_bool() fills bool_val_to_struct[] at value - 1, so a count larger than the values present leaves NULL entries. Every user of that array then walks it by index and dereferences each entry: cond_evaluate_expr() on the access-vector path, security_get_bools() and security_get_bool_value() behind selinuxfs, and security_set_bools(). A sparse class value is absorbed by policydb_class_isvalid() and its siblings; booleans have no

• Обновитесь до 5.15.0-1115.121

selinux: reject an unclaimed class value in security_get_classes()

In the Linux kernel, the following vulnerability has been resolved: selinux: reject an unclaimed class value in security_get_classes() security_get_classes() sizes an array by p_classes.nprim and fills it at value - 1, so a class value the policy never defines leaves a NULL. sel_make_classes() passes every entry to sel_make_dir(), reaching the same d_alloc_name() dereference as the permission array. The class symbol table is allowed to be sparse (policydb_class_isvalid() exists to absorb that), but this getter builds its own array straight from the hash table and has no such predicate. Fail the lookup when a value went unclaimed instead of

• Обновитесь до 5.15.0-1115.121

ASoC: codecs: lpass-wsa-macro: Fix enum kcontrol accesses

In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: lpass-wsa-macro: Fix enum kcontrol accesses EAR SPKR PA Gain" and the four "WSA RX* Mux" controls are enumerated, but their get and put callbacks access the value through ucontrol->value.integer.value[0] (a long) instead of ucontrol->value.enumerated.item[0] (an unsigned int). This same pattern was fixed in the sibling drivers by commit bcfe5f76cc40 ("ASoC: codecs: rx-macro: fix accessing array out of bounds for enum type") and commit 0ea5eff7c606 ("ASoC: codecs: va-macro: fix accessing array out of bounds for enum type"), but wsa-macro was missed. On 64-bit

• Обновитесь до 5.15.0-1115.121

drm/amdgpu: Reject UVD message with invalid number of h265 refs

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Reject UVD message with invalid number of h265 refs Same change as for h264, avoids overflow later when calculating min dpb size. (cherry picked from commit a4b0720e4f1601f97f59a2be9c1b4b94fa6527d5)

• Обновитесь до 5.15.0-1115.121

drm/amdgpu: Reject UVD message with dimensions above 4096

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Reject UVD message with dimensions above 4096 Fixes potential overflow in DPB size calculations. (cherry picked from commit 05e1387d151f71569fbe122d2c89f9db0c21dc10)

• Обновитесь до 5.15.0-1115.121

drm/amdgpu: Fix UVD dpb min size calculation for H264

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix UVD dpb min size calculation for H264 This should use actual number of references from the decode message, instead of maximum derived from level. (cherry picked from commit 64b525edb7e7bdfcdc77883c5e413804e2396856)

net: packet: fix wrong transport_header when sending VLAN-tagged frame

In the Linux kernel, the following vulnerability has been resolved: net: packet: fix wrong transport_header when sending VLAN-tagged frame In packet_parse_headers(), when processing a VLAN-tagged frame, skb_set_network_header() is called to advance network_header past the VLAN tag to the inner protocol header. skb_probe_transport_header() is then called with skb->protocol still set to the outer VLAN EtherType (e.g. ETH_P_8021Q), while nhoff (derived from skb_network_offset()) already points past the VLAN tag to the inner protocol header. In __skb_flow_dissect(), proto is initialized to ETH_P_8021Q and nhoff points past the VLAN tag. When t

• Обновитесь до 5.15.0-1115.121