Без оценкиEPSS 0,18%Нет опубликованного исправления
RDMA/core: Wait for RCU callbacks before unloading ib_core
In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: Wait for RCU callbacks before unloading ib_core
put_gid_ndev() is queued with call_rcu() and implemented in ib_core.
Stopping the workqueues does not drain callbacks already queued, so RCU
could invoke it after the module code has been unloaded.
synchronize_rcu() does not wait for callbacks. Wait for them after all
producers have stopped.
Без оценкиEPSS 0,21%Нет опубликованного исправления
RDMA/mlx5: Drain RCU callbacks during module teardown
In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Drain RCU callbacks during module teardown
devx_free_subscription() can remain queued after the last DevX event file
drops its module reference or an auxiliary driver detaches its devices.
mlx5_ib can then unload before the callback runs.
Registration error unwind has the same risk because driver registration
can attach existing devices before failing. Wait after all drivers have
stopped.
Без оценкиEPSS 0,22%Нет опубликованного исправления
RDMA/ipoib: Drain RCU callbacks during module teardown
In the Linux kernel, the following vulnerability has been resolved:
RDMA/ipoib: Drain RCU callbacks during module teardown
IPoIB reclamation completions can be signaled from inside an RCU callback.
Teardown can wake before the callback returns and unload ib_ipoib while its
code is still executing.
Client registration failure can also remove already-added devices and queue
callbacks. Wait after client and workqueue teardown.
Высокий · CVSS 8.2EPSS 0,54%Нет опубликованного исправления
RDMA/rxe: Avoid reprocessing the current packet after the QP enters the error state
In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Avoid reprocessing the current packet after the QP enters the error state
When do_complete() finds the QP in the error state it returns
RESPST_CHK_RESOURCE. Before commit 49dc9c1f0c7e ("RDMA/rxe: Cleanup
reset state handling in rxe_resp.c") this was the flush loop:
check_resource() had an error-state branch that fetched each remaining
recv WQE and completed it with IB_WC_WR_FLUSH_ERR, without touching
the current packet. That commit removed the error-state branch from
check_resource() (draining is now done at rxe_receiver() entry) but
kept the do_complete() erro
Высокий · CVSS 7.8EPSS 0,18%Нет опубликованного исправления
esp: do not unref managed frag pages in esp_ssg_unref()
In the Linux kernel, the following vulnerability has been resolved:
esp: do not unref managed frag pages in esp_ssg_unref()
esp_ssg_unref() releases the page references held on the source
scatterlist after the AEAD operation completes. It calls
skb_page_unref() on every frag page for an out-of-place transform
(req->src != req->dst), and in the error path of esp_output_tail()
(already_unref == true) on the request's own scatterlist.
This is wrong when the skb carries managed frags
(SKBFL_MANAGED_FRAG_REFS). Managed frags are owned by a zerocopy ubuf
and the skb does not hold a per-frag page reference; io_uring SEND_ZC
with a registered bu
Без оценкиEPSS 0,18%Нет опубликованного исправления
RDMA/rvt: Return NULL after port allocation failure
In the Linux kernel, the following vulnerability has been resolved:
RDMA/rvt: Return NULL after port allocation failure
rvt_alloc_device() deallocates the IB device when its port array cannot
be allocated but then returns the pointer to the released allocation.
Callers treat any non-NULL value as valid and dereference it, resulting
in a use-after-free.
Return NULL immediately after deallocation so callers can propagate the
allocation failure.
Без оценкиEPSS 0,18%Нет опубликованного исправления
RDMA/hfi1: Preserve unit 0 on allocation failure
In the Linux kernel, the following vulnerability has been resolved:
RDMA/hfi1: Preserve unit 0 on allocation failure
hfi1_free_devdata() assumes that the device was inserted into the unit
table and unconditionally erases dd->unit. If xa_alloc_irq() fails, the
zero-initialized unit remains zero, so full cleanup can remove an
unrelated device from index 0.
Release only the rdmavt allocation and return immediately while the unit
table has not acquired the device.
Без оценкиEPSS 0,17%Нет опубликованного исправления
RDMA/hfi1: Free RX data on late probe failure
In the Linux kernel, the following vulnerability has been resolved:
RDMA/hfi1: Free RX data on late probe failure
hfi1_init_dd() allocates the shared AIP/VNIC RX support before returning.
If hfi1_init() or hfi1_register_ib_device() later fails, init_one() tears
down the device data without calling hfi1_free_rx(). This leaks netdev_rx
and its dummy netdev.
Free the RX support after IB unregistration and before postinit_cleanup(),
as done on normal device removal.
Без оценкиEPSS 0,17%Нет опубликованного исправления
media: v4l2-async: Unregister sub-device if asc_list is empty
In the Linux kernel, the following vulnerability has been resolved:
media: v4l2-async: Unregister sub-device if asc_list is empty
When my em28xx USB device that uses the i2c tvp5150 driver is
disconnected, it crashes.
The cause is that the tvp5150 i2c module uses v4l2_async, but
the em28xx driver does not since it predates v4l2_async.
In that corner case sd->asc_list is empty, so
v4l2_async_unregister_subdev() never calls v4l2_device_unregister_subdev().
Modify the code so that, if sd->asc_list is empty,
v4l2_device_unregister_subdev() is still called.
Без оценкиEPSS 0,21%Нет опубликованного исправления
fs/resctrl: Prevent use-after-free in rdtgroup_kn_put()
In the Linux kernel, the following vulnerability has been resolved:
fs/resctrl: Prevent use-after-free in rdtgroup_kn_put()
A struct rdtgroup is reference counted via rdtgroup::waitcount. Callers that
need the structure to remain valid across a sleep (while waiting on acquiring
rdtgroup_mutex) take a reference with rdtgroup_kn_get() and release it with
rdtgroup_kn_put().
The release path is intended to serve as the fallback freer: if the count
drops to zero and the group has already been marked RDT_DELETED,
rdtgroup_kn_put() frees the structure.
The bulk teardown paths free_all_child_rdtgrp() and rmdir_all_sub() resulting
from a resctrl d
Без оценкиEPSS 0,21%Нет опубликованного исправления
fs/resctrl: Fix UAF from worker threads when domains are removed
In the Linux kernel, the following vulnerability has been resolved:
fs/resctrl: Fix UAF from worker threads when domains are removed
The mbm_handle_overflow() and cqm_handle_limbo() workers read event counters
and may sleep while doing so. They are scheduled via delayed_work embedded in
struct rdt_l3_mon_domain. Architecture allocates and frees these domains from
CPU hotplug callbacks under cpus_write_lock(), and the workers acquire
cpus_read_lock() to keep the domain alive across their access.
A use-after-free can occur when a worker is blocked waiting for
cpus_read_lock() while the hotplug core holds cpus_write_lock(): the
architecture f
Без оценкиEPSS 0,22%Нет опубликованного исправления
rpmsg: glink: fix deadlock in endpoint destroy during driver detach
In the Linux kernel, the following vulnerability has been resolved:
rpmsg: glink: fix deadlock in endpoint destroy during driver detach
During driver detach, the device core holds the device mutex throughout
the driver's remove callback chain. When the rpmsg endpoint is
destroyed as part of that teardown, the GLINK endpoint destroy
implementation attempts to unregister the underlying rpmsg device.
That unregistration calls device_del(), which tries to re-acquire the
same device mutex already held higher up the stack, causing rmmod to
hang indefinitely.
The deadlock manifests with the following call chain:
[<0>] device_del+0x44/0x414 <-
Без оценкиEPSS 0,2%Нет опубликованного исправления
cxl/mbox: Break poison list loop on an empty payload
In the Linux kernel, the following vulnerability has been resolved:
cxl/mbox: Break poison list loop on an empty payload
A device that returns count == 0 with CXL_POISON_FLAG_MORE set on every
iteration never advances nr_records, so the max_errors guard never
trips and the do/while loops forever while holding poison.mutex. That
hangs the sysfs-triggered scan thread and blocks all subsequent poison
operations on the device. The existing "Protect against an uncleared
_FLAG_MORE" guard was intended to bound a misbehaving device but does
not cover the count == 0 case.
Stop the loop on an empty payload so a malfunctioning or malicious
device ca
Высокий · CVSS 7.8EPSS 0,18%Нет опубликованного исправления
hfsplus: validate thread record before delete key rebuild
In the Linux kernel, the following vulnerability has been resolved:
hfsplus: validate thread record before delete key rebuild
hfsplus_delete_cat() is called with str == NULL when the last open
reference to an unlinked HFS+ hardlink backing inode is closed. In that
case, the function finds the catalog thread by CNID and rebuilds the
catalog key from thread.nodeName.
That reconstruction path reads thread.nodeName.length directly from the
catalog B-tree into fd.search_key and then copies length * 2 bytes into
fd.search_key->cat.name.unicode. It does not first check that the found
record is a thread record or that its size matches the thread n
Без оценкиEPSS 0,17%Нет опубликованного исправления
firmware: arm_scmi: Publish channel state before callbacks
In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Publish channel state before callbacks
Transport setup can enable callbacks before the setup routine returns.
mailbox_chan_setup() registers the mailbox client with
mbox_request_channel(), and the mailbox controller startup path can enable
interrupt delivery before SCMI mailbox channel state has been published.
Similarly, smc_chan_setup() requests the optional A2P completion IRQ before
the SMC transport has made its cinfo pointer visible.
If a pending or spurious callback fires in those windows, the transport RX
callback can dereference a NULL transport
Без оценкиEPSS 0,17%Нет опубликованного исправления
firmware: arm_scmi: Unregister device notifier before IDR teardown
In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Unregister device notifier before IDR teardown
The requested-devices notifier looks up protocol fwnodes from the
active_protocols IDR. During remove, unregister the notifier before
releasing and destroying active_protocols so no notifier callback can race
with the IDR teardown.
Keep the bus notifier registered until after the protocol state is torn
down, matching the existing remove ordering for SCMI bus users.
Без оценкиEPSS 0,21%Нет опубликованного исправления
firmware: arm_scmi: Quiesce notifications before teardown
In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Quiesce notifications before teardown
scmi_notification_exit() clears and releases the notification instance,
but transport callbacks can still deliver incoming notifications until
the TX/RX channels are freed. During remove, an RX interrupt in that
window can enter scmi_notify() while notification state is being torn
down and then dereference freed memory. The same ordering exists on the
probe error path after notification initialization.
The notification late-init worker has a separate lifetime issue: protocol
event registration queues ni->init_work o
Без оценкиEPSS 0,21%Нет опубликованного исправления
firmware: arm_scmi: Clean up channels on setup failure
In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Clean up channels on setup failure
scmi_channels_setup() can fail after the common BASE channel or earlier
protocol channels have already been registered in the TX/RX IDRs.
Route this failure through the existing channel cleanup label so the
transport channels, transport devices and IDR state created before the
failure are released before the probe error path frees the SCMI instance
ID.
Без оценкиEPSS 0,21%Нет опубликованного исправления
firmware: arm_scmi: Free transport channel on IDR failure
In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Free transport channel on IDR failure
If transport channel setup succeeds but the following IDR insertion fails,
the error path destroys the transport device and frees the channel info
without invoking the transport cleanup callback.
Call chan_free() before destroying the device so transport specific
resources such as IRQs, mailbox channels and mapped shared memory are
released consistently with the normal teardown path.
Без оценкиEPSS 0,21%Нет опубликованного исправления
firmware: arm_scmi: Avoid IDR updates while cleaning channels
In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Avoid IDR updates while cleaning channels
scmi_cleanup_channels() walks the TX/RX channel IDRs with
idr_for_each() to free transport resources and destroy the dedicated
transport devices before calling idr_destroy().
The destroy callback removed each entry from the same IDR being walked.
That is not needed for this cleanup path, and it is unsafe because
idr_for_each() has not advanced its radix-tree iterator while the
callback is running. Removing the current entry from the callback can
invalidate the iterator state. The callback also cannot be protecte