Уязвимости linux-nvidia-tegra · Страница 91

nfc: llcp: reject PDUs shorter than the LLCP header

In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: reject PDUs shorter than the LLCP header Every LLCP PDU begins with a two-byte header (DSAP/SSAP + PTYPE), but the receive path never checked that a frame is at least LLCP_HEADER_SIZE bytes before parsing it. nfc_llcp_rx_skb() reads the header via nfc_llcp_ptype()/nfc_llcp_dsap()/ nfc_llcp_ssap(), which dereference pdu->data[0] and pdu->data[1], and a CONNECT or CC PDU then computes tlv_array_len = skb->len - LLCP_HEADER_SIZE; as a size_t and hands it to the TLV walk. When the frame is shorter than the header the subtraction wraps to a huge value and the walk

• Обновитесь до 5.15.0-1070.72

nfc: pn533: purge fragmented skbs during cleanup

In the Linux kernel, the following vulnerability has been resolved: nfc: pn533: purge fragmented skbs during cleanup pn53x_common_clean() purges resp_q before freeing the common PN533 state, but it leaves fragment_skb untouched. The fragmentation helpers queue transmit fragments there while sending large initiator or target-mode frames, and those skbs remain owned by the driver until they are sent or discarded. If the device is removed while fragments are still queued, the common cleanup path frees the PN533 state without releasing the queued fragment skbs, leaking them. Purge fragment_skb during cleanup alongside resp_q.

• Обновитесь до 5.15.0-1070.72

nfc: nci: add data_len bound checks to activation parameter extractors

In the Linux kernel, the following vulnerability has been resolved: nfc: nci: add data_len bound checks to activation parameter extractors nci_extract_activation_params_iso_dep() and nci_extract_activation_params_nfc_dep() read an inner length byte from the NCI RF_INTF_ACTIVATED_NTF payload and use it to memcpy() into fixed kernel buffers, but neither function receives the caller-validated activation_params_len. A crafted NCI notification with activation_params_len=1 and an inner length byte of up to 20 (NFC-A) or 50 (NFC-B) causes memcpy() to read that many bytes past the one valid byte in the activation params region -- a slab out-of-bou

• Обновитесь до 5.15.0-1070.72

nfc: nci: fix out-of-bounds write in nci_target_auto_activated()

In the Linux kernel, the following vulnerability has been resolved: nfc: nci: fix out-of-bounds write in nci_target_auto_activated() nci_target_auto_activated() appends a target to the fixed-size array ndev->targets[NCI_MAX_DISCOVERED_TARGETS] and increments ndev->n_targets without first checking the array is full; unlike its sibling nci_add_new_target(), which bails out when n_targets already equals NCI_MAX_DISCOVERED_TARGETS. ndev->n_targets is only cleared by nci_clear_target_list(), so an NFCC that repeatedly re-runs discovery (RF_DISCOVER_RSP, which re-enters NCI_DISCOVERY without clearing the target list) and reports an auto-activate

• Обновитесь до 5.15.0-1070.72

nfc: nci: fix uninit-value in the RF discover/activated NTF handlers

In the Linux kernel, the following vulnerability has been resolved: nfc: nci: fix uninit-value in the RF discover/activated NTF handlers nci_rf_discover_ntf_packet() and nci_rf_intf_activated_ntf_packet() each parse a notification into an on-stack struct (nci_rf_discover_ntf / nci_rf_intf_activated_ntf) that is not initialised. The RF technology-specific parameters are only extracted when rf_tech_specific_params_len is non-zero, so a notification that reports a zero length leaves the rf_tech_specific_params union uninitialised - and both handlers then pass it to nci_add_new_protocol(), which reads it: - discover: nci_add_new_target() ->

• Обновитесь до 5.15.0-1070.72

ipv4: reject undersized MTUs in ip_do_fragment()

In the Linux kernel, the following vulnerability has been resolved: ipv4: reject undersized MTUs in ip_do_fragment() ip_do_fragment() subtracts the IPv4 header length from the effective MTU and passes the resulting payload MTU to ip_frag_next(). If the effective MTU is smaller than hlen + 8, ip_frag_next() rounds the fragment payload length down to zero. The fragmentation state then never makes forward progress: state->left, state->ptr and state->offset stay unchanged while ip_do_fragment() keeps allocating and transmitting header-only fragments until the softlockup detector fires. This is reproducible with a route installed using "mtu lo

• Обновитесь до 5.15.0-1070.72

ipv6: fix use-after-free in ip6_finish_output2()

In the Linux kernel, the following vulnerability has been resolved: ipv6: fix use-after-free in ip6_finish_output2() ip6_finish_output2() caches a pointer to the IPv6 destination address (daddr) before invoking lwtunnel_xmit(). The LWT-BPF transmit path or other encapsulation operations within lwtunnel_xmit() can reallocate the skb head, freeing the memory that daddr points to. When lwtunnel_xmit() returns LWTUNNEL_XMIT_CONTINUE, the function continues to use the stale daddr pointer to compute the nexthop and to look up or create the neighbour entry. This results in a use-after-free read, which can leak sensitive kernel data, pollute the

• Обновитесь до 5.15.0-1070.72

nvmet-fc: fix invalid free in LS IOD error path

In the Linux kernel, the following vulnerability has been resolved: nvmet-fc: fix invalid free in LS IOD error path nvmet_fc_alloc_ls_iodlist() advances iod while initializing the LS IOD array. If an rqstbuf allocation or response buffer DMA mapping fails, the unwind loop decrements iod past the start of the array. The final kfree(iod) therefore frees an address before the allocated object. This can be reproduced with nvme-fcloop and failslab by setting fail-nth to 6 before creating a target port. KASAN reports: BUG: KASAN: invalid-free in nvmet_fc_register_targetport Free of addr ffff88816cf8ff48 by task nvmet_fail_nth/9552 Free the

• Обновитесь до 5.15.0-1070.72

nvmet-tcp: bound SGL data length before allocating command buffers

In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: bound SGL data length before allocating command buffers nvmet_tcp_map_data() reads the host-controlled 32-bit sgl->length and, for the in-capsule offset descriptor (type 0x01), checks it against port->inline_data_size before use. Any other SGL descriptor type -- including the non-inline transport SGL data-block descriptor (type (NVME_TRANSPORT_SGL_DATA_DESC << 4) | NVME_SGL_FMT_TRANSPORT_A, the type a real host uses for out-of-capsule writes) skips that check entirely and falls straight through to: cmd->req.sg = sgl_alloc(len, GFP_KERNEL, &cmd->req.sg_cnt); wi

• Обновитесь до 5.15.0-1070.72

nvmet-tcp: Do not WARN on remotely-controlled oversized SGL allocations

In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: Do not WARN on remotely-controlled oversized SGL allocations When fuzzing the nvme target code, I tripped a kernel warning in nvmet_tcp_map_data() because the length passed into the allocator is controlled by the remote initiator. A remote initiator that sends a command with an SGL claiming a huge number, can create a scatterlist and iovec allocation of over 1 million entries, which causes the backing kmalloc call to exceed MAX_PAGE_ORDER and then the page allocator will trip on a WARN_ON_ONCE_GFP() message: WARNING: mm/page_alloc.c:5280 __alloc_frozen_pages_

• Обновитесь до 5.15.0-1070.72

fbdev: Wrap user-invoked calls to fb_set_var() in helper

In the Linux kernel, the following vulnerability has been resolved: fbdev: Wrap user-invoked calls to fb_set_var() in helper Handle fbcon during display updates in fb_set_var_from_user(). Check with fbcon if the mode change is possible, update hardware state and finally update fbcon. Update all callers. Only the FBIOPUT_VSCREENINFO ioctl currently does all steps. Other mode-changes callers in sysfs and driver code are missing fbcon-related steps. With the new helper, ps3fb and sh_mobile_lcdcfb no longer maintain fbcon state themselves.

fbdev: serialize mode sysfs access with lock_fb_info()

In the Linux kernel, the following vulnerability has been resolved: fbdev: serialize mode sysfs access with lock_fb_info() show_mode(), show_modes(), and store_mode() access fb_info->modelist and fb_info->mode without holding lock_fb_info(). store_modes() takes lock_fb_info() while replacing the modelist and freeing the old one. A concurrent reader or writer can load a pointer to an old modelist entry before store_modes() frees it, then dereference freed memory or store a stale freed pointer in fb_info->mode. Take lock_fb_info() in show_mode(), show_modes(), and store_mode() to serialize with store_modes(). In show_mode(), copy the mode t

HID: magicmouse: prevent unbounded recursion in magicmouse_raw_event()

In the Linux kernel, the following vulnerability has been resolved: HID: magicmouse: prevent unbounded recursion in magicmouse_raw_event() magicmouse_raw_event() handles DOUBLE_REPORT_ID (0xf7) packets, which pack two touch reports into one, by splitting the packet and calling itself on each half. The only guard against runaway recursion is a "size < 1" check, which stops zero-sized calls but does not bound the recursion depth. A malicious HID device that matches this driver can send a report starting with DOUBLE_REPORT_ID and filled with the sequence [0xf7, 0x00]. Each level consumes two bytes and recurses on the remainder, so an incoming

• Обновитесь до 5.15.0-1070.72

HID: magicmouse: do not keep a stale msc->input if no input is claimed

In the Linux kernel, the following vulnerability has been resolved: HID: magicmouse: do not keep a stale msc->input if no input is claimed magicmouse_input_mapping() caches the first hid_input's input_dev in msc->input while the report descriptor is parsed, and the rest of the driver treats a non-NULL msc->input as proof that an input device was registered. That does not hold on the hid-input error path. If hidinput_connect() fails -- for instance because input_register_device() returns an error -- it unwinds through hidinput_disconnect(), which frees every input_dev it created, including the one cached in msc->input. The failure does not

• Обновитесь до 5.15.0-1070.72

HID: core: fix OOB read of field->usage in hid_set_field()

In the Linux kernel, the following vulnerability has been resolved: HID: core: fix OOB read of field->usage in hid_set_field() hid_set_field() hands field->usage + offset to hid_dump_input() before the guard that bounds offset: hid_dump_input(field->report->device, field->usage + offset, value); if (offset >= field->report_count) { hid_err(...); return -1; } Under CONFIG_DEBUG_FS hid_dump_input() dereferences that pointer, with buf = hid_resolv_usage(usage->hid, NULL). The usage[] array is allocated inline with the hid_field in hid_register_field() and holds field->maxusage entries, so an offset past it reads off the end of the k

• Обновитесь до 5.15.0-1070.72

HID: ft260: fix stack-use-after-return write in I2C read race

In the Linux kernel, the following vulnerability has been resolved: HID: ft260: fix stack-use-after-return write in I2C read race ft260_i2c_read() points dev->read_buf at a caller-supplied buffer (often an on-stack variable), arms a completion and waits up to five seconds for the device to return the data. The HID input callback ft260_raw_event() runs in the input/IRQ path, independent of the dev->lock mutex held by the read path, and copies the device-supplied payload into dev->read_buf after a plain NULL check. These two paths share read_buf, read_idx and read_len with no serialization. If the device delays its response until the read ti

• Обновитесь до 5.15.0-1070.72

HID: sensor: custom: Fix use-after-free in enable_sensor

In the Linux kernel, the following vulnerability has been resolved: HID: sensor: custom: Fix use-after-free in enable_sensor enable_sensor_store() can call set_power_report_state(), which dereferences sensor_inst->power_state and sensor_inst->report_state. These pointers refer to entries in sensor_inst->fields. Create the field attributes before exposing the enable_sensor sysfs attribute, so enable_sensor cannot be accessed before the state it depends on has been initialized. On remove, delete enable_sensor before freeing the field attributes, so a concurrent sysfs write cannot dereference freed memory through power_state or report_state.

• Обновитесь до 5.15.0-1070.72

HID: uclogic: fix use-after-free of inrange_timer on remove

In the Linux kernel, the following vulnerability has been resolved: HID: uclogic: fix use-after-free of inrange_timer on remove uclogic_remove() cancels the pen in-range timer and then stops the device: timer_delete_sync(&drvdata->inrange_timer); hid_hw_stop(hdev); timer_delete_sync() only guarantees the timer is idle at that instant. uclogic_raw_event_pen() keeps delivering pen reports until hid_hw_stop() stops the transport several lines later, and every report with pen->inrange == UCLOGIC_PARAMS_PEN_INRANGE_NONE re-arms the timer: mod_timer(&drvdata->inrange_timer, jiffies + msecs_to_jiffies(100)); A report landing between the tim

• Обновитесь до 5.15.0-1070.72

HID: hyperv: validate initial device info bounds

In the Linux kernel, the following vulnerability has been resolved: HID: hyperv: validate initial device info bounds The Hyper-V synthetic HID host supplies SYNTH_HID_INITIAL_DEVICE_INFO messages that contain a HID descriptor followed by the report descriptor bytes. mousevsc_on_receive_device_info() trusts bLength and wDescriptorLength without checking that the received packet contains both byte ranges. A malformed host or backend message can therefore make the guest read past the received VMBus packet while copying the report descriptor. Pass the received initial-device-info size into the parser and reject descriptor lengths that exceed t

• Обновитесь до 5.15.0-1070.72

Bluetooth: hci_event: fix LE list UAF on reset

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_event: fix LE list UAF on reset hci_cc_reset() clears the LE accept and resolving lists without taking hdev->lock. Other command-complete handlers serialize updates to these lists with that lock, and the debugfs readers hold it while walking them. This permits the reset completion and a debugfs read to interleave as follows: hci_rx_work debugfs reader ----------- -------------- lock hdev->lock fetch current entry list_del(entry) kfree(entry)