Без оценкиEPSS 0,21%Нет опубликованного исправления
nvmet: fix max_qid race between configfs and controller allocation
In the Linux kernel, the following vulnerability has been resolved:
nvmet: fix max_qid race between configfs and controller allocation
The function nvmet_subsys_attr_qid_max_store() can race against
nvmet_alloc_ctrl() when a subsystem's max_qid limit is modified.
Suppose max_qid is currently 64. If nvmet_alloc_ctrl() executes:
ctrl->sqs = kzalloc_objs(struct nvmet_sq *, subsys->max_qid + 1);
and at this exact point, a userspace process changes max_qid to 128,
nvmet_subsys_attr_qid_max_store() will set the new max_qid value. It
attempts to delete active controllers to force a reconnect, but the
new controller won't be deleted because it has
Высокий · CVSS 7.8EPSS 0,18%Нет опубликованного исправления
ocfs2: validate orphan slot during inode read
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate orphan slot during inode read
Patch series "ocfs2: validate active orphan slots during inode read".
OCFS2 trusts active ordinary and append-DIO orphan slots read from dinodes.
A corrupted slot can therefore index osb_orphan_wipes or the slot-local
system-inode cache outside their allocations before the corruption is
reported.
Patch 1 validates the ordinary orphan slot used by inode wipe processing.
Patch 2 validates the append-DIO orphan slot used by DIO completion and
orphan recovery. Both checks reject corrupt metadata at the existing inode
validation b
Высокий · CVSS 7.8EPSS 0,18%Нет опубликованного исправления
ocfs2: validate DIO orphan slot during inode read
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate DIO orphan slot during inode read
[BUG]
A corrupted append-DIO dinode (high byte at offset 0xa1
corrupted from 0 to 1) can carry an i_dio_orphaned_slot
outside the mounted filesystem slot range and trigger a
use-after-free error:
BUG: KASAN: slab-use-after-free in ocfs2_get_system_file_inode+0x780/0x820 fs/ocfs2/sysfile.c:102
Read of size 8 at addr ffff88800b767c00 by task kworker/u8:3/85
Call Trace:
...
ocfs2_get_system_file_inode+0x780/0x820 fs/ocfs2/sysfile.c:102
ocfs2_wipe_inode+0x292/0xf70 fs/ocfs2/inode.c:840
ocfs2_delete_inode fs/ocfs2/inode.c:11
Высокий · CVSS 7.1EPSS 0,17%Нет опубликованного исправления
Squashfs: check block offset is not negative
In the Linux kernel, the following vulnerability has been resolved:
Squashfs: check block offset is not negative
If a negative offset is read off disk (for example the offset into the
decompressed fragment block), this will cause squashfs_copy_data() to
perform an out of bounds access.
Fix by checking if offset is negative, and returning 0. This matches
existing behaviour where an offset beyond the block returns 0 bytes
copied.
To trigger this out of bounds access requires a crafted Squashfs
filesystem and CAP_SYS_ADMIN to mount it. Unprivileged users will not be
able to mount such a filesystem, but once mounted, an unprivileged user
ca
In the Linux kernel, the following vulnerability has been resolved:
scsi: mpt3sas: Avoid freeing unallocated PCIe SGL buffers
_base_release_memory_pools() unconditionally frees every
ioc->pcie_sg_lookup[] entry, including ones the setup loop never
allocated after a partial failure, causing a "bad dma" warning on debug
kernels or a NULL pointer dereference otherwise.
Высокий · CVSS 7.1EPSS 0,22%Нет опубликованного исправления
fs/ntfs3: fix integer overflow in MFT cluster validation
In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: fix integer overflow in MFT cluster validation
In ntfs_init_from_boot(), the boot sector's MFT cluster numbers are
validated against the volume size with:
if (mlcn * sct_per_clst >= sectors ||
mlcn2 * sct_per_clst >= sectors)
goto out;
mlcn and mlcn2 are u64 fields read directly from the boot sector.
sct_per_clst is bounded above by 4096 (true_sectors_per_clst() plus
the is_power_of_2() check below it), but the multiplication is done
in u64 and wraps when mlcn (or mlcn2) is large enough -- e.g. mlcn
near 2^62 with sct_per_clst == 4 wraps to 0, which com
Высокий · CVSS 7.8EPSS 0,17%Нет опубликованного исправления
fs/ntfs3: reject out-of-range evcn in mi_enum_attr()
In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: reject out-of-range evcn in mi_enum_attr()
In mi_enum_attr(), the start/end VCN validation for non-resident
attributes is:
if (svcn > evcn + 1) goto out;
When evcn is U64_MAX the "evcn + 1" expression wraps to 0 and any svcn
passes the check. For evcn values close to U64_MAX (but not equal to it)
the right-hand side is still a meaningless near-wrap upper bound, so a
malformed on-disk attribute with svcn == 0 and evcn near U64_MAX can pass
mi_enum_attr() unrejected.
VCN (virtual cluster number) is a cluster index, so any valid evcn is
bounded by the volume's to
Без оценкиEPSS 0,23%Нет опубликованного исправления
ALSA: core: Fix use-after-free in snd_card_do_free()
In the Linux kernel, the following vulnerability has been resolved:
ALSA: core: Fix use-after-free in snd_card_do_free()
A use-after-free was detected in snd_card_do_free() when a sound card
managed by devres is unbound while a user-space application still holds an
open file descriptor.
For managed cards, the memory is allocated using devres_alloc(), and its
release function is set to __snd_card_release(), which calls
snd_card_free(). When the device is unbound, the unbind thread calls
snd_card_free(), which drops a reference to the card's device. If the user
thread still has an open file descriptor, the reference count does not
reach zero
Без оценкиEPSS 0,21%Нет опубликованного исправления
ASoC: SOF: validate topology volume range before allocation
In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: validate topology volume range before allocation
SOF treats the topology mixer min and max values as non-negative indices
into its volume table. It stores them in signed fields, allocates max + 1
entries through an int argument, and later indexes the table with the
stored range.
An inverted range is invalid, while a maximum at or above INT_MAX cannot
be represented safely after the increment or in the signed fields.
Validate the complete range before storing it or allocating the table.
Без оценкиEPSS 0,21%Нет опубликованного исправления
ACPI: scan: fix bus ID cleanup on device_add() failures
In the Linux kernel, the following vulnerability has been resolved:
ACPI: scan: fix bus ID cleanup on device_add() failures
When device_add() fails after acpi_device_set_name() has allocated an
instance ID and a new acpi_device_bus_id has been linked into
acpi_bus_id_list, the rollback path only removes wakeup_list and
detaches the ACPI handle data.
That leaves the bus-ID bookkeeping behind and keeps the allocated
instance number consumed.
Move the bus-ID cleanup and wakeup-list removal into a single helper.
Use it from both the normal device teardown path and the device_add()
rollback path. The wakeup list node is initialized before reg
Без оценкиEPSS 0,21%Нет опубликованного исправления
null_blk: use DEFINE_MUTEX for the file-scope mutex
In the Linux kernel, the following vulnerability has been resolved:
null_blk: use DEFINE_MUTEX for the file-scope mutex
In null_init(), mutex_init(&lock) currently happens after
configfs_register_subsystem(), which exposes the nullb subsystem to
userspace. A racing mkdir() into /sys/kernel/config/nullb/ can reach
null_find_dev_by_name() -> mutex_lock(&lock) before the mutex is
initialized, trigger warning:
[ 123.137788] DEBUG_LOCKS_WARN_ON(lock->magic != lock)
[ 123.137796] WARNING: kernel/locking/mutex.c:159 at mutex_lock+0x171/0x1c0, CPU#13: mkdir/1301
[ 123.140090] Modules linked in: null_blk(+) nft_fib_inet nft_fib_ipv4
......
[ 12
Без оценкиEPSS 0,17%Нет опубликованного исправления
null_blk: register configfs subsystem after creating default devices
In the Linux kernel, the following vulnerability has been resolved:
null_blk: register configfs subsystem after creating default devices
In null_init(), configfs_register_subsystem() currently runs before
register_blkdev(), so when null_blk is built as a module, a racing mkdir()
+ poweron from userspace can reach null_add_dev() while null_major is still
0. __add_disk() then hits WARN_ON(disk->minors) (major=0 with minors!=0)
and fails:
[root@fedora ~]# [ 2366.521436] WARNING: block/genhd.c:476 at __add_disk+0x8a7/0xde0,
[ 2366.523552] Modules linked in: null_blk(+) nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib
[ 2366.529081] CPU: 26 UID:
Без оценкиEPSS 0,21%Нет опубликованного исправления
null_blk: free global tag_set on init error path
In the Linux kernel, the following vulnerability has been resolved:
null_blk: free global tag_set on init error path
If shared_tags is enabled, null_setup_tagset() allocates the global tag_set
via null_init_global_tag_set(). If device creation later fails, err_dev
destroys the default devices and calls unregister_blkdev(), but never frees
the global tag_set. Since module init failed, null_exit() is never invoked,
so the global tag_set's tags and maps are permanently leaked.
Free the global tag_set in err_dev, matching null_exit() which does
if (tag_set.ops) blk_mq_free_tag_set(&tag_set).
Без оценкиEPSS 0,21%Нет опубликованного исправления
null_blk: free zones array on device power-off
In the Linux kernel, the following vulnerability has been resolved:
null_blk: free zones array on device power-off
null_init_zoned_dev() allocates dev->zones when a zoned device is powered
on, but null_del_dev() never frees it on power-off; dev->zones is only
freed later in null_free_dev(), when the configfs directory is removed. If
the device is powered off and then on again, null_init_zoned_dev()
allocates a new array and overwrites the dev->zones pointer, leaking the
previous allocation each power cycle.
Free dev->zones in null_del_dev() via null_free_zoned_dev() to solve it.
And calling null_free_zoned_dev() in null_free_dev() is no lo
Без оценкиEPSS 0,21%Нет опубликованного исправления
null_blk: reject per-device queue resize for shared tag set
In the Linux kernel, the following vulnerability has been resolved:
null_blk: reject per-device queue resize for shared tag set
When shared_tags is enabled, null_setup_tagset() makes the device use the
global tag_set, whose driver_data stays NULL. null_map_queues() therefore
falls back to the module-wide g_submit_queues/g_poll_queues instead of any
per-device value.
Resizing submit_queues or poll_queues via configfs on such a device calls
blk_mq_update_nr_hw_queues() on the shared set, shrinking
set->nr_hw_queues. __blk_mq_realloc_hw_ctxs() only grows the
q->queue_hw_ctx[] allocation, so on shrink it merely exits and NULLs the
now-excess
Без оценкиEPSS 0,21%Нет опубликованного исправления
null_blk: serialize configfs attribute stores with the lock
In the Linux kernel, the following vulnerability has been resolved:
null_blk: serialize configfs attribute stores with the lock
The NULLB_DEVICE_ATTR _store takes no lock: apply_fn attributes
(submit_queues, poll_queues) get dev->NAME written again after apply_fn
returns, outside its lock; APPLY=NULL attributes are entirely lockless.
configfs only serializes stores per-open-file, so concurrent stores on
separate fds race.
For apply_fn attributes, once one store's apply_fn has reconfigured the
hardware, a second (losing) store can still overwrite dev->NAME
afterwards. This leaves dev->submit_queues out of sync with the live
queue count, whi
Без оценкиEPSS 0,21%Нет опубликованного исправления
null_blk: serialize configfs attribute updates with device setup
In the Linux kernel, the following vulnerability has been resolved:
null_blk: serialize configfs attribute updates with device setup
The attribute store methods generated with NULLB_DEVICE_ATTR() refuse to
change the configuration of a live device by testing
NULLB_DEV_FL_CONFIGURED, but that flag is only set by
nullb_device_power_store() after null_add_dev() has returned, and the
store methods take no lock at all. configfs only serializes writes to
the same open file (buffer->mutex), so a write to any attribute can run
concurrently with null_add_dev() and change the device configuration
while it is being used.
null_add_dev() reads the conf
Средний · CVSS 6.8EPSS 0,21%Нет опубликованного исправления
blk-iolatency: clear delay state when freeing policy data
In the Linux kernel, the following vulnerability has been resolved:
blk-iolatency: clear delay state when freeing policy data
io.latency can throttle a group which has no latency target of its own.
When a sibling misses its target, check_scale_change() scales down its
peers, and a peer that reaches queue depth one gets blkcg_use_delay()
called on it on every further scale-down, even with min_lat_nsec == 0.
iolatency_pd_offline() resets the target through
iolatency_set_min_lat_nsec(), which clears the delay only on a nonzero
to zero transition, so it never clears such a peer. Freeing the policy
data then leaves blkg->use_delay set and blkc
blk-iocost: clear delay state when freeing policy data
In the Linux kernel, the following vulnerability has been resolved:
blk-iocost: clear delay state when freeing policy data
iocg_kick_delay() turns sufficiently large debt into an explicit
block-cgroup delay with blkcg_set_delay(), setting blkg->use_delay to
-1 and incrementing blkcg->congestion_count. Clearing it again depends
on iocg_kick_delay() running from the period timer, the waitq timer or
the issue path.
ioc_pd_free() removes the iocg from active_iocgs and cancels its waitq
timer, and no further bios can arrive, so once it has run nothing is
left which can reduce the debt and clear the delay. The blkcg stays
marked congested for
Без оценкиEPSS 0,21%Нет опубликованного исправления
block: mtip32xx: synchronize ioctls with device removal
In the Linux kernel, the following vulnerability has been resolved:
block: mtip32xx: synchronize ioctls with device removal
The ioctl handlers only test REMOVE_PENDING before entering
mtip_hw_ioctl(). Removal can set that bit immediately afterwards and free
dd->port in mtip_hw_exit() while an ioctl still dereferences it. An already
open block device can reach the handlers while del_gendisk() is in
progress.
Serialize both native and compat ioctls with removal. Set REMOVE_PENDING
before taking the mutex so new callers fail after an in-flight ioctl has
drained, and hold the mutex until the port has been torn down.