p PatchFirst

PatchFirst · Свежие уязвимости

Уязвимости linux-aws-7.0 · Страница 114

За последние 30 дней в linux-aws-7.0 опубликовано уязвимостей: 835; в каталоге KEV: 0.

RSS ↗ JSON ↗
Фильтры уязвимостей
Сбросить фильтры

Уязвимостей: 5250

  1. CVE-2026-89945

    Без оценкиEPSS 0,22%Нет опубликованного исправления

    ASoC: cs35l34: drain threaded IRQ before runtime suspend

    In the Linux kernel, the following vulnerability has been resolved: ASoC: cs35l34: drain threaded IRQ before runtime suspend cs35l34_runtime_suspend() currently switches the codec into regcache_cache_only(true), asserts reset low, and powers the device off without first quiescing the threaded IRQ registered by devm_request_threaded_irq(). That leaves a window where cs35l34_irq_thread() can still run after suspend has removed live hardware access. A running system can reach this during runtime PM while the driver still has critical fault IRQs unmasked. If the threaded handler runs in that window, it reads volatile INT_STATUS_1..4 after cach

    linux-aws-7.0Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  2. CVE-2026-89944

    Без оценкиEPSS 0,21%Нет опубликованного исправления

    ASoC: hdac_hda: Fix hlink refcount leak on component registration failure

    In the Linux kernel, the following vulnerability has been resolved: ASoC: hdac_hda: Fix hlink refcount leak on component registration failure hdac_hda_dev_probe() gets the HDA link with snd_hdac_ext_bus_link_get() before registering the ASoC component. If component registration fails, the function returns without dropping the link reference. Always call snd_hdac_ext_bus_link_put() after the registration attempt so the reference taken during probe is balanced on both success and failure.

    linux-aws-7.0Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  3. CVE-2026-89942

    Высокий · CVSS 7.8EPSS 0,16%Нет опубликованного исправления

    iio: buffer: Fix potential use-after-free in anonymous buffer release

    In the Linux kernel, the following vulnerability has been resolved: iio: buffer: Fix potential use-after-free in anonymous buffer release An anonymous buffer handle holds a reference to the underlying IIO device. The reference is dropped in the buffer handle's release function. If the device has been removed, either through unbind or hot-unplug, the buffer handle might hold the last reference. The release function takes the mutex for the buffer using a guard, which means the unlock happens after all the code in the function, including `iio_device_put()`. If the anonymous buffer holds the last reference this might free both the IIO device a

    linux-aws-7.0Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  4. CVE-2026-89941

    Высокий · CVSS 7.8EPSS 0,16%Нет опубликованного исправления

    iio: buffer: Make IIO DMA fence release RCU-safe

    In the Linux kernel, the following vulnerability has been resolved: iio: buffer: Make IIO DMA fence release RCU-safe The `dma_fence` documentation states that if a custom release implementation is provided, the `dma_fence` object must be freed in an RCU-safe way. The current `iio_dma_fence` implementation uses `kfree()`, which might result in a use-after-free. Remove the custom `release` implementation. This makes the DMA fence core fall back to `dma_fence_free()`, which calls `kfree_rcu()` on the fence. This requires that the fence be the first member of `struct iio_dma_fence`. Using the default release method for extended DMA fence stru

    linux-aws-7.0Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  5. CVE-2026-89940

    Высокий · CVSS 7.8EPSS 0,16%Нет опубликованного исправления

    iio: buffer: Tie IIO dma fence lock lifetime to the fence

    In the Linux kernel, the following vulnerability has been resolved: iio: buffer: Tie IIO dma fence lock lifetime to the fence The `iio_dma_fence` implementation currently uses a lock embedded in the `iio_dmabuf_priv`. But the `iio_dma_fence` can outlive the `iio_dmabuf_priv`, which can cause a use-after-free. Tie the lifetime of the lock to the lifetime of the fence by embedding them in the same struct. We can't just hold a reference to the `iio_dmabuf_priv` from the `iio_dma_fence` since `iio_buffer_dmabuf_release()` might sleep and the fence release callback is not allowed to sleep. Note that the `dma_fence` framework now has an intern

    linux-aws-7.0Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  6. CVE-2026-89939

    Без оценкиEPSS 0,21%Нет опубликованного исправления

    iio: chemical: atlas-sensor: fix PM reference leak in buffer postenable

    In the Linux kernel, the following vulnerability has been resolved: iio: chemical: atlas-sensor: fix PM reference leak in buffer postenable atlas_buffer_postenable() acquires a runtime PM reference with pm_runtime_resume_and_get() but returns the result of atlas_set_interrupt() directly. If atlas_set_interrupt() fails, the runtime PM reference is leaked and the device can never autosuspend. Add pm_runtime_put_autosuspend() on the error path to balance the reference.

    linux-aws-7.0Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  7. CVE-2026-89938

    Высокий · CVSS 7.8EPSS 0,17%Нет опубликованного исправления

    iio: chemical: atlas-sensor: use iio_trigger_poll_nested() to fix remove UAF

    In the Linux kernel, the following vulnerability has been resolved: iio: chemical: atlas-sensor: use iio_trigger_poll_nested() to fix remove UAF The atlas driver requests its hardware data-ready IRQ with devm_request_threaded_irq(); its threaded handler queues an irq_work, atlas_work_handler(), that calls iio_trigger_poll(data->trig). The IRQ is devm-managed, so free_irq() runs from the devres unwind after atlas_remove() returns without flushing that irq_work. Once a buffer is enabled, conversion-complete IRQs keep firing and queueing it; a pending irq_work can therefore run after the unwind has freed atlas_data/indio_dev and the trigger,

    linux-aws-7.0Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  8. CVE-2026-89937

    Без оценкиEPSS 0,22%Нет опубликованного исправления

    iio: chemical: sgp30: Handle IAQ thread creation failure

    In the Linux kernel, the following vulnerability has been resolved: iio: chemical: sgp30: Handle IAQ thread creation failure kthread_run() can fail and return an error pointer, but sgp_probe() stores it and returns success, so the device is registered without its IAQ thread and sgp_remove() later passes the error pointer to kthread_stop(). Return the error from probe instead.

    linux-aws-7.0Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  9. CVE-2026-89936

    Без оценкиEPSS 0,22%Нет опубликованного исправления

    iio: dac: m62332: Fix regulator reference count imbalance

    In the Linux kernel, the following vulnerability has been resolved: iio: dac: m62332: Fix regulator reference count imbalance m62332_set_value() enables the Vcc regulator on every write of a non-zero value and disables it on every write of zero, without tracking the channel's current state. Because the regulator is reference counted, changing a channel directly from one non-zero value to another enables it more than once, while a later write of zero disables it only once. The reference count never returns to zero and the regulator is left enabled indefinitely. Only enable the regulator on the transition from zero to non-zero, and only disa

    linux-aws-7.0Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  10. CVE-2026-89935

    Без оценкиEPSS 0,21%Нет опубликованного исправления

    iio: light: apds9306: fix PM reference leak in apds9306_read_data()

    In the Linux kernel, the following vulnerability has been resolved: iio: light: apds9306: fix PM reference leak in apds9306_read_data() apds9306_read_data() calls pm_runtime_resume_and_get() but several error paths return directly without calling pm_runtime_put_autosuspend(), leaking the runtime PM reference and preventing the device from autosuspending. Use PM_RUNTIME_ACQUIRE_AUTOSUSPEND() and PM_RUNTIME_ACQUIRE_ERR() to automatically handle runtime PM reference release on all return paths.

    linux-aws-7.0Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  11. CVE-2026-89934

    Без оценкиEPSS 0,23%Нет опубликованного исправления

    iio: light: ltrf216a: fix runtime PM reference leak in error path

    In the Linux kernel, the following vulnerability has been resolved: iio: light: ltrf216a: fix runtime PM reference leak in error path ltrf216a_get_lux() acquires a runtime PM reference by calling ltrf216a_set_power_state(data, true). However, if ltrf216a_read_data() fails, the function returns immediately without dropping the reference. This leaves the runtime PM usage count unbalanced, preventing the device from autosuspending after a failed read. Fix this by releasing the runtime PM reference before returning from the error path.

    linux-aws-7.0Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  12. CVE-2026-89933

    Без оценкиEPSS 0,21%Нет опубликованного исправления

    iio: pressure: dps310: fix NULL pointer dereference on ACPI probe

    In the Linux kernel, the following vulnerability has been resolved: iio: pressure: dps310: fix NULL pointer dereference on ACPI probe When the device is enumerated through its ACPI HID (IFX3100), i2c_client_get_device_id() returns NULL: the ACPI-derived client name does not match the driver's i2c_device_id table. dps310_probe() then dereferences that NULL pointer in "iio->name = id->name" and crashes the kernel during probe. The IIO device name is always "dps310", so set it directly and drop the now-unused device-id lookup.

    linux-aws-7.0Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  13. CVE-2026-89932

    Высокий · CVSS 8.8EPSS 0,17%Нет опубликованного исправления

    KVM: nVMX: Always flush vpid02 on first use

    In the Linux kernel, the following vulnerability has been resolved: KVM: nVMX: Always flush vpid02 on first use Make sure vpid02 is always flushed on first use by setting last_vpid=0 when allocating vpid02. nested_vmx_transition_tlb_flush() will always detect a VPID change on first VM-Enter after VMXON, because VPID=0 in vmcs12 is not allowed if L1 enables VPID. This avoids using stale TLB entries from a previous lifetime of the VPID, that might have been associated with a different vCPU (or a completely different VM). Note that last_vpid is already being initialized as 0 when the vCPU is created, but it is not reset when vpid02 is freed

    linux-aws-7.0Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  14. CVE-2026-89931

    Без оценкиEPSS 0,21%Нет опубликованного исправления

    KVM: nVMX: Ensure KVM_REQ_GET_NESTED_STATE_PAGES is cleared on VM-Exit

    In the Linux kernel, the following vulnerability has been resolved: KVM: nVMX: Ensure KVM_REQ_GET_NESTED_STATE_PAGES is cleared on VM-Exit Always check and clear KVM_REQ_GET_NESTED_STATE_PAGES when emulating a nested VM-Exit to ensure the request is cleared, even when KVM was built with CONFIG_KVM_HYPERV=n, as KVM subtly relies on the "check" to clear the flag and thus avoid double-mapping the vmcs12 pages, e.g. if KVM manages to bail from VM-Enter without processing the request, and then emulates VMLAUNCH or VMRESUME.

    linux-aws-7.0Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  15. CVE-2026-89930

    Критический · CVSS 9.3EPSS 0,19%Нет опубликованного исправления

    KVM: nVMX: Service local TLB flushes on failed nested VM-Enter

    In the Linux kernel, the following vulnerability has been resolved: KVM: nVMX: Service local TLB flushes on failed nested VM-Enter KVM services local TLB flushes on "full" nested VM-Exits (through __nested_vmx_vmexit()), but not if a nested VM-Enter fails (e.g. due to failed VMCS checks in nested_vmx_enter_non_root_mode()). However, it is possible that KVM had queued TLB flushes that need to be performed, even if the nested VM-Enter was not successful. For example, if VPID is disabled for L2 (via nested_vmx_transition_tlb_flush(), or if via the MSR load lists, as the SDM says: If any MSR is being loaded in such a way that would architec

    linux-aws-7.0Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  16. CVE-2026-89929

    Высокий · CVSS 8.8EPSS 0,17%Нет опубликованного исправления

    KVM: nVM: Ensure INVVPID is emulated on the correct physical CPU

    In the Linux kernel, the following vulnerability has been resolved: KVM: nVM: Ensure INVVPID is emulated on the correct physical CPU When emulating INVVPID, KVM executes INVVPID on the physical CPU using vpid02 (instead of the L1 assigned VPID), after doing some validations on the operands. However, it is possible that the physical CPU KVM executes INVVPID on is different from the CPU L2 is running on. For example, in the following scenario: - L2 runs on CPU #1 and exits to L1 (vmx->nested.vmcs02.cpu=1) - L1 migrates to CPU #2 and executes INVVPID - KVM executes INVVPID on CPU #2 - L1 migrates back to CPU #1 and runs L2 (vmx->nested.vmcs02

    linux-aws-7.0Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  17. CVE-2026-89928

    Высокий · CVSS 8.8EPSS 0,17%Нет опубликованного исправления

    KVM: x86/mmu: Consume the locked rmap value in the lockless rmap walk

    In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: Consume the locked rmap value in the lockless rmap walk __kvm_rmap_lock() deliberately elides the rmap lock when it observes an empty rmap. In that case kvm_rmap_lock_readonly() also re-enables preemption and returns zero, so the caller holds neither the rmap lock nor a preemption reference. The elision documents the invariant it relies on: * Elide the lock if the rmap is empty, as lockless walkers (read-only * mode) don't need to (and can't) walk an empty rmap, nor can they add * entries to the rmap. I.e. the only paths that process empty rmaps *

    linux-aws-7.0Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  18. CVE-2026-89927

    Высокий · CVSS 7.1EPSS 0,18%Нет опубликованного исправления

    KVM: x86: hyper-v: Clamp stimer deadline to avoid livelock

    In the Linux kernel, the following vulnerability has been resolved: KVM: x86: hyper-v: Clamp stimer deadline to avoid livelock Fix an issue where userspace or the guest can program an Hyper-V synthetic timer to have a deadline in the past via integer overflow, preventing the CPU from making progress and triggering an RCU stall. Hyper-V's SynIC exposes 4 per-vCPU synthetic timers to the guest, which are emulated by KVM. Each is programmed through the HV_X64_MSR_STIMERi_CONFIG and HV_X64_MSR_STIMERi_COUNT MSRs. Depending on CONFIG, COUNT represents either the absolute expiration time or the period of a periodic timer, both expressed in 100ns

    linux-aws-7.0Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  19. CVE-2026-89926

    Без оценкиEPSS 0,22%Нет опубликованного исправления

    KVM: s390: Fix length check __import_wp_info()

    In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Fix length check __import_wp_info() struct kvm_hw_breakpoint::len is a __u64 that is fully controlled by user space. This is then assigned to wp_info->len, which is an int. The bounds check is done on the truncated value while the allocation uses the untruncated one: wp_info->len = bp_data->len; [...] if (wp_info->len < 0 || wp_info->len > MAX_WP_SIZE) return -EINVAL; wp_info->old_data = kmalloc(bp_data->len, GFP_KERNEL_ACCOUNT); Use the validated value for the allocation as intended. Without this fix userspace can trigger >4GB allocations which will fai

    linux-aws-7.0Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  20. CVE-2026-89925

    Без оценкиEPSS 0,22%Нет опубликованного исправления

    KVM: s390: Fix memory leak in guest debug handling

    In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Fix memory leak in guest debug handling bp_data is freed only for the error case by kfree(bp_data). Every successful KVM_SET_GUEST_DEBUG will leak bp_data.

    linux-aws-7.0Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

Проверьте свой сервер

Сопоставьте установленный стек и версии со свежими базами уязвимостей.

Проверьте свой сервер →