Без оценкиEPSS 0,21%Нет опубликованного исправления
iommu/sva: Set handle->dev before the SVA handle is visible
In the Linux kernel, the following vulnerability has been resolved:
iommu/sva: Set handle->dev before the SVA handle is visible
iommu_attach_device_pasid() installs the new SVA attach handle in the
group PASID lookup before iommu_sva_bind_device() returns. A concurrent
bind can therefore find and reuse the same handle after iommu_sva_lock is
dropped.
handle->dev was initialized after dropping iommu_sva_lock. This leaves a
window where a racing bind can return a handle whose dev pointer is still
NULL. A subsequent iommu_sva_unbind_device() can then dereference it via
handle->dev->iommu_group.
Initialize handle->dev before releasing iommu_s
Высокий · CVSS 8.8EPSS 0,13%Нет опубликованного исправления
iommu/tegra241-cmdqv: Reject a vSID wider than the SID_MATCH field
In the Linux kernel, the following vulnerability has been resolved:
iommu/tegra241-cmdqv: Reject a vSID wider than the SID_MATCH field
tegra241_vintf_init_vsid() programs the guest-provided vSID into SID_MATCH,
whose VIRT_SID field spans bits [20:1] with bit 0 as the match-enable flag.
The HW therefore matches only a 20-bit Stream ID.
The bound check rejects only virt_sid > UINT_MAX, which admits a value far
wider than the field. The write "virt_sid << 1 | 0x1" then drops every bit
above 20: a virt_sid of 0x80000000 lands as SID_MATCH = 0x1, a valid match
on vSID 0, so the entry aliases the wrong Stream ID. Because vdev->virt_id
is guest-c
Без оценкиEPSS 0,21%Нет опубликованного исправления
iommu: Fix dev_iommu memory leak when device_add fails in iommu_mock_device_add
In the Linux kernel, the following vulnerability has been resolved:
iommu: Fix dev_iommu memory leak when device_add fails in iommu_mock_device_add
iommu_mock_device_add() first calls iommu_fwspec_init(), which on
success allocates both dev->iommu (via dev_iommu_get()) and
dev->iommu->fwspec. If the subsequent device_add(dev) call fails,
the error path only calls iommu_fwspec_free(dev), which frees
fwspec but leaves dev->iommu still allocated.
This triggers the following kmemleak report when fuzzing with Syzkaller:
BUG: memory leak
unreferenced object 0xffff888011e0a200 (size 192):
comm "syz.1.1695", pid 24885, jiffies 4295222527
hex
iommu/vt-d: Force requesting ACS when tboot is enabled
In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Force requesting ACS when tboot is enabled
Currently the conditions of requesting ACS in detect_intel_iommu()
don't include tboot, leading to a possible misconfiguration with ACS
disabled (e.g. due to user opts) while iommu is later forced on by
tboot_force_iommu().
Fix it by checking tboot in detect_intel_iommu().
Без оценкиEPSS 0,22%Нет опубликованного исправления
iommufd: Avoid locking internal accesses during unmap
In the Linux kernel, the following vulnerability has been resolved:
iommufd: Avoid locking internal accesses during unmap
iommufd_access_notify_unmap() skips internal accesses because they do
not have an external unmap callback to invoke.
However, the current test calls iommufd_lock_obj() before checking
whether the access is internal. If iommufd_lock_obj() succeeds, the loop
then sees the internal access and continues, bypassing the matching
iommufd_put_object() used by the normal unmap path. This leaks the
object reference taken by iommufd_lock_obj().
Check for internal accesses first so skipped entries are never locked.
Без оценкиEPSS 0,21%Нет опубликованного исправления
iommufd: Release current IOAS on xa_store() failure
In the Linux kernel, the following vulnerability has been resolved:
iommufd: Release current IOAS on xa_store() failure
iommufd_take_all_iova_rwsem() takes an object reference and the
iova_rwsem write lock before storing the IOAS in the temporary ioas_list
xarray.
If xa_store() fails, the current IOAS has not been inserted into
ioas_list yet. iommufd_release_all_iova_rwsem() only unwinds IOAS
objects already present in that xarray, so it cannot release the current
IOAS.
Release the current IOAS rwsem and object reference before unwinding the
previously stored entries.
Высокий · CVSS 8.8EPSS 0,17%Нет опубликованного исправления
iommufd: Fix UAF in selftest IOPF reporting
In the Linux kernel, the following vulnerability has been resolved:
iommufd: Fix UAF in selftest IOPF reporting
IOMMUFD selftest TRIGGER_IOPF borrows an attach handle from
group->pasid_array without synchronizing against PASID detach,
then a concurrent iommu_report_device_fault() can dereference
that borrowed handle's domain pointer after the detach erases
the handle and frees the backing struct iommufd_attach_handle.
TRIGGER_IOPF then dereferences the freed handle, causing a UAF.
Fix by adding a iopf_rwsem in mock_dev to follow the expected design
of a real driver. Hold its read side across the whole
iommu_report_device_fault() call, and
In the Linux kernel, the following vulnerability has been resolved:
platform/x86: dell-wmi-sysman: Don't hex dump attribute security buffer
set_attribute() populates the security area of the BIOS attribute request
buffer with the current admin password via populate_security_buffer(), then
dumps the whole request buffer with print_hex_dump_bytes(). This can expose
the plaintext admin password in the kernel log.
The same issue was fixed for the password attribute path by
commit d1a196e0a6dc ("platform/x86: dell-wmi-sysman: Don't hex dump
plaintext password data"). Remove the remaining dump from the BIOS
attribute path.
Высокий · CVSS 7.1EPSS 0,16%Нет опубликованного исправления
platform/x86: ISST: Validate level in perf mask ioctls
In the Linux kernel, the following vulnerability has been resolved:
platform/x86: ISST: Validate level in perf mask ioctls
isst_if_get_perf_level_mask() and isst_if_get_base_freq_mask() use the
user-provided level as an index into perf_levels[] via
_read_pp_level_info() and _read_bf_level_info(), but neither helper
validates it first.
The adjacent level-info helpers reject levels above max_level before
reading the same per-level register block. Add the same bounds checks to
the mask helpers, and reject disabled SST-PP levels in
isst_if_get_perf_level_mask() to match isst_if_get_perf_level_info().
This prevents out-of-bounds reads from the
Высокий · CVSS 7.8EPSS 0,17%Нет опубликованного исправления
platform/x86: ISST: Validate socket ID in clos_assoc ioctl
In the Linux kernel, the following vulnerability has been resolved:
platform/x86: ISST: Validate socket ID in clos_assoc ioctl
isst_if_clos_assoc() validates the user-supplied socket_id with
'socket_id > topology_max_packages()', but isst_common.sst_inst[] is
allocated with topology_max_packages() entries, so the valid index range
is [0, topology_max_packages()). The '>' comparison lets
socket_id == topology_max_packages() pass and index one entry past the
array.
In addition, isst_common.sst_inst[socket_id] is NULL for an in-range
package that has no bound TPMI SST instance, and the pointer is used
without a NULL check. Both the out-of-b
Высокий · CVSS 7.8EPSS 0,13%Нет опубликованного исправления
mmc: via-sdmmc: cancel card-detect work on remove
In the Linux kernel, the following vulnerability has been resolved:
mmc: via-sdmmc: cancel card-detect work on remove
Disabling the device interrupt and freeing the IRQ prevents new card-detect
work from being queued, but carddet_work already queued by the handler can
still run after via_sd_remove() returns. via_sdc_card_detect() recovers the
host through container_of() and dereferences its MMIO base; once remove()
returns the host can be freed, so that work would touch freed memory.
Cancel carddet_work after freeing the IRQ and before cancelling
finish_bh_work, which the card-detect handler can also queue. carddet_work
can re-enable the i
Высокий · CVSS 7.8EPSS 0,17%Нет опубликованного исправления
mmc: via-sdmmc: stop card-detect handling on probe failure
In the Linux kernel, the following vulnerability has been resolved:
mmc: via-sdmmc: stop card-detect handling on probe failure
request_irq() registers the SD card-detect interrupt and the probe enables
it before mmc_add_host() runs. If mmc_add_host() fails, the error path only
unmaps the registers and returns: the interrupt stays registered, so the
handler keeps running against the host once it is freed. via_sdc_isr()
dereferences sdhost and its MMIO base and schedules carddet_work, which
via_sdc_card_detect() also runs against freed memory through its
container_of() dereference.
Add a probe-error path that disables and frees the interrupt
Без оценкиEPSS 0,21%Нет опубликованного исправления
platform/x86: ISST: Add a NULL check for sst_inst[]
In the Linux kernel, the following vulnerability has been resolved:
platform/x86: ISST: Add a NULL check for sst_inst[]
To be consistent with other places, add a NULL check for failed socket
loading by checking isst_common.sst_inst[].
Без оценкиEPSS 0,21%Нет опубликованного исправления
platform/x86: ISST: Validate logical CPU id and clos id
In the Linux kernel, the following vulnerability has been resolved:
platform/x86: ISST: Validate logical CPU id and clos id
Validate max CLOS ID and logical CPU ID for core power feature.
Reject any clos level or logical CPU number greater than the
supported maximum. These are used to calculate MMIO offset.
Без оценкиEPSS 0,17%Нет опубликованного исправления
platform/x86: int1092: Fix potential memory leak in sar_probe()
In the Linux kernel, the following vulnerability has been resolved:
platform/x86: int1092: Fix potential memory leak in sar_probe()
The memory allocated for device_mode_info in parse_package() called by
sar_get_data() is not freed in some of the error paths in sar_probe().
Fix that by converting to use device managed allocations.
Высокий · CVSS 7.8EPSS 0,18%Нет опубликованного исправления
platform/x86: panasonic-laptop: Fix sentinel write past pcc->sinf[]
In the Linux kernel, the following vulnerability has been resolved:
platform/x86: panasonic-laptop: Fix sentinel write past pcc->sinf[]
acpi_pcc_retrieve_biosdata() rejects SINF packages only when
pcc->num_sifr is strictly less than hkey->package.count, then
unconditionally writes a trailing sentinel at
pcc->sinf[hkey->package.count]. But pcc->sinf[] is allocated with
exactly pcc->num_sifr elements (valid indices 0..num_sifr-1), so that
write needs num_sifr strictly greater than package.count to stay in
bounds -- num_sifr == package.count passes the existing check but
still overflows by one element.
This is exactly the case probe()'s exist
Без оценкиEPSS 0,16%Нет опубликованного исправления
platform/x86: think-lmi: Free system certificate signatures
In the Linux kernel, the following vulnerability has been resolved:
platform/x86: think-lmi: Free system certificate signatures
Multi-certificate support also allows the system authentication object
to store ->signature and ->save_signature, which leak when the driver is
removed. Free the signatures to avoid leaking memory.
Высокий · CVSS 8.4EPSS 0,18%Нет опубликованного исправления
platform/chrome: sensorhub: Bound the EC-reported sensor number
In the Linux kernel, the following vulnerability has been resolved:
platform/chrome: sensorhub: Bound the EC-reported sensor number
Each EC FIFO event carries an 8-bit sensor number (in->sensor_num).
cros_ec_sensorhub_ring_handler() validates the FIFO event count, the
per-read count and the ring bound, but not the sensor number, which
cros_ec_sensor_ring_process_event() then uses unchecked to index
sensorhub->batch_state[] - allocated with only sensorhub->sensor_num
entries. A sensor number of sensor_num or larger is an out-of-bounds
read and write of batch_state[].
Validate the sensor number in the ring handler, where each event is read
f
Высокий · CVSS 7.7EPSS 0,19%Нет опубликованного исправления
platform/x86/amd/pmc: Propagate SMU errors and validate S2D address
In the Linux kernel, the following vulnerability has been resolved:
platform/x86/amd/pmc: Propagate SMU errors and validate S2D address
amd_stb_s2d_init() discards the return value of several S2D SMU commands.
When the SMU refuses a command (e.g. "SMU cmd failed. err: 0xff") the
failure is only noticed indirectly - if at all - and reported as -EIO,
masking the real error.
More seriously, the S2D_PHYS_ADDR_LOW/HIGH return values are ignored, so
on failure phys_addr_low/hi are left uninitialised and the assembled
address is passed straight to devm_ioremap(). When the SMU leaves them at
zero this maps physical address 0 and trips the ioremap
Высокий · CVSS 7.8EPSS 0,18%Нет опубликованного исправления
platform/x86/amd/pmc: Fix LPS0 and debugfs leaks when STB init fails
In the Linux kernel, the following vulnerability has been resolved:
platform/x86/amd/pmc: Fix LPS0 and debugfs leaks when STB init fails
amd_pmc_probe() registers the LPS0 s2idle handler with
acpi_register_lps0_dev() and creates the driver's debugfs directory before
calling amd_stb_s2d_init(), which is the last step in probe that can fail.
When amd_stb_s2d_init() fails (for example the S2D telemetry region cannot
be ioremapped on a long-running system, or the SMU rejects the S2D setup)
the error path only calls pci_dev_put() and returns. This leaves
amd_pmc_s2idle_dev_ops on the global lps0_s2idle_devops_head list and leaks
the debugfs di