PatchFirst · Свежие уязвимости
За последние 30 дней в linux-azure-fde-7.0 опубликовано уязвимостей: 1039; в каталоге KEV: 0.
Уязвимостей: 6113
In the Linux kernel, the following vulnerability has been resolved: platform/x86: think-lmi: Free system certificate signatures Multi-certificate support also allows the system authentication object to store ->signature and ->save_signature, which leak when the driver is removed. Free the signatures to avoid leaking memory.
In the Linux kernel, the following vulnerability has been resolved: platform/chrome: sensorhub: Bound the EC-reported sensor number Each EC FIFO event carries an 8-bit sensor number (in->sensor_num). cros_ec_sensorhub_ring_handler() validates the FIFO event count, the per-read count and the ring bound, but not the sensor number, which cros_ec_sensor_ring_process_event() then uses unchecked to index sensorhub->batch_state[] - allocated with only sensorhub->sensor_num entries. A sensor number of sensor_num or larger is an out-of-bounds read and write of batch_state[]. Validate the sensor number in the ring handler, where each event is read f
In the Linux kernel, the following vulnerability has been resolved: platform/x86/amd/pmc: Propagate SMU errors and validate S2D address amd_stb_s2d_init() discards the return value of several S2D SMU commands. When the SMU refuses a command (e.g. "SMU cmd failed. err: 0xff") the failure is only noticed indirectly - if at all - and reported as -EIO, masking the real error. More seriously, the S2D_PHYS_ADDR_LOW/HIGH return values are ignored, so on failure phys_addr_low/hi are left uninitialised and the assembled address is passed straight to devm_ioremap(). When the SMU leaves them at zero this maps physical address 0 and trips the ioremap
In the Linux kernel, the following vulnerability has been resolved: platform/x86/amd/pmc: Fix LPS0 and debugfs leaks when STB init fails amd_pmc_probe() registers the LPS0 s2idle handler with acpi_register_lps0_dev() and creates the driver's debugfs directory before calling amd_stb_s2d_init(), which is the last step in probe that can fail. When amd_stb_s2d_init() fails (for example the S2D telemetry region cannot be ioremapped on a long-running system, or the SMU rejects the S2D setup) the error path only calls pci_dev_put() and returns. This leaves amd_pmc_s2idle_dev_ops on the global lps0_s2idle_devops_head list and leaks the debugfs di
In the Linux kernel, the following vulnerability has been resolved: platform/x86: hp-bioscfg: fix heap OOB read in sk_store() and kek_store() sk_store() and kek_store() strip a trailing newline from the sysfs write before allocating the key buffer: length = count; if (buf[length - 1] == '\n') length--; bioscfg_drv.spm_data.signing_key = kmemdup(buf, length, GFP_KERNEL); but then pass the original "count" (not "length") as the copy size to hp_wmi_perform_query(), which memcpy()s that many bytes out of the "length"-sized allocation, reading one byte past it whenever the write ends in a newline, the normal case for a shell "echo" into s
In the Linux kernel, the following vulnerability has been resolved: platform/x86: hp-bioscfg: fix heap OOB read on empty password write validate_password_input() computes length = strlen(buf) and then checks buf[length - 1] to strip a trailing newline, without checking that length is nonzero first. Writing an empty string (a bare '\n') to current_password or new_password gives length == 0, and buf[length - 1] reads buf[-1], one byte before the heap allocation holding the copied input. KASAN confirms this directly: BUG: KASAN: slab-out-of-bounds in store_password_instance.constprop.0+0x223/0x2a0 [hp_bioscfg] Read of size 1 at addr ffff
In the Linux kernel, the following vulnerability has been resolved: platform/x86: hp-bioscfg: fix off-by-one write in hp_get_string_from_buffer() hp_get_string_from_buffer() clamps the converted string length against the destination buffer size with "size > dst_size", so when the converted length is exactly equal to dst_size, conv_dst_size is left at dst_size and the unconditional NUL terminator write dst[conv_dst_size] = 0; lands one byte past the destination buffer. This is the same shape of bug as the previously fixed off-by-one in hp_convert_hexstr_to_str(): the buffer is sized correctly for the content, but the terminator write is n
In the Linux kernel, the following vulnerability has been resolved: platform/x86: hp-bioscfg: pass validated element count to package parsers The per-type package parsers are handed the wrong element count. hp_init_bios_package_attribute() validates obj->package.count and then calls one of the five hp_populate_*_package_data() wrappers (string, integer, enumeration, ordered list, password). Each wrapper forwards a count to its hp_populate_*_elements_from_package() parser, but instead of forwarding the validated obj->package.count it derives the count from elements[0]. elements[0] is the NAME field and is always an ACPI_TYPE_STRING, so read
In the Linux kernel, the following vulnerability has been resolved: interconnect: Fix use after free in icc_get() and of_icc_get_by_index() In of_icc_get_by_index() and icc_get(), if the dynamic allocation for path->name fails via kasprintf(), the error handling path directly calls kfree(path) to free the path object and returns an error. However, prior to this point, path_find() calls path_init(), which already links the path's requests into the req_list of the respective interconnect nodes via hlist_add_head(). Directly invoking kfree(path) leaves dangling pointers in the hlist. A subsequent call to icc_get() or icc_set_bw() will travers
In the Linux kernel, the following vulnerability has been resolved: ipmi: ipmb: validate write message length ipmb_write() read message fields before validating the length byte. A zero or short write can read uninitialized stack bytes. A length smaller than the SMBus header underflows the block write length. Require a non-empty buffer and the minimum IPMB request length. Also require the length byte plus payload before parsing the message.
In the Linux kernel, the following vulnerability has been resolved: ipmi: Remove all sysfs files on registration failure ipmi_add_smi() creates the nr_users and nr_msgs files before trying to create the maintenance_mode file. If that last creation fails, the error path removes only nr_users before dropping the final reference to the interface. Remove nr_msgs as well so no sysfs attribute embedded in the freed interface remains registered.
In the Linux kernel, the following vulnerability has been resolved: ipmi: si: Fix NULL pointer dereference after failed registration try_smi_init() allocates new_smi->si_sm and later calls ipmi_register_smi_mod(), which maps to ipmi_add_smi(). During ipmi_add_smi(), the upper IPMI message handler obtains the initial BMC device information through __bmc_get_device_id(). This can fail if the BMC does not return a successful response to the Get Device ID command. When the BMC returns a nonzero completion code, the device-id helper retries the command and eventually returns -EIO if the device ID still cannot be fetched. On this failure path,
In the Linux kernel, the following vulnerability has been resolved: ipmi:msghandler: Cancel work cleanly on an error If an error occurs during startup of an IPMI interface, it may have scheduled work to run. The work needs to be canceled before the interface can be freed.
In the Linux kernel, the following vulnerability has been resolved: net/iucv: filter frames in afiucv_hs_rcv() by ingress device afiucv_hs_rcv() selects a socket from iucv_sk_list by matching four 8-byte name fields in the transport header alone. No check is made against the net_device the frame arrived on. This can cause a frame arriving on any netdev to be delivered to an AF_IUCV socket. Three problems follow. First, a frame arriving over HiperSockets can be delivered to a socket bound to the classic z/VM IUCV transport, which has iucv->hs_dev == NULL. iucv_sock_bind() takes the classic path whenever the requested userid matches iucv_us
In the Linux kernel, the following vulnerability has been resolved: xdp: fix zero-copy frame layout xdp_convert_zc_to_xdp_frame() clones an XSK packet into an order-0 page and advertises PAGE_SIZE as its frame size. It allows the copied frame to occupy the page tail needed by skb_shared_info and records zero headroom even when metadata separates the frame header from packet data. An AF_XDP zero-copy packet redirected through cpumap can therefore make the skb overlap skb_shared_info or place it beyond the allocated page. Limit the copied layout to SKB_WITH_OVERHEAD(PAGE_SIZE) and include the metadata length in frame headroom. Redirect cal
In the Linux kernel, the following vulnerability has been resolved: slip: fix use-after-free in sl_sync() slip_devs[] stores bare net_device pointers and takes no reference on them. sl_sync() and sl_alloc() walk that table from slip_open() under rtnl_lock(), while an entry is dropped by sl_free_netdev(), which sl_setup() installs as dev->priv_destructor. priv_destructor is called from netdev_run_todo(), which deliberately runs with the RTNL semaphore released so that it can sleep while waiting for the device refcount to drop: /* Snapshot list, allow later requests */ list_replace_init(&net_todo_list, &list); __rtnl_unlock(); ... i
In the Linux kernel, the following vulnerability has been resolved: net: tun: bound receive headroom tun_get_user() uses tun->align both as skb headroom and when choosing how much packet data to keep linear. OVS can propagate an oversized headroom request from another port to TUN or TAP. When align is larger than the usable space in a one-page skb head, SKB_MAX_HEAD(align) underflows and the result becomes negative when stored in good_linear. That value later wraps when assigned to the size_t linear variable, and tun_alloc_skb() can place skb->data outside the allocated head. Bound the headroom stored by TUN to the one-page skb-head budge
In the Linux kernel, the following vulnerability has been resolved: net: dsa: realtek: use gpiod_set_value_cansleep for reset GPIO rtl83xx_reset_assert() and rtl83xx_reset_deassert() are only called from the probe path, which may sleep and is not timing-critical. When the reset GPIO is provided by a sleeping controller such as an I2C I/O expander, gpiod_set_value() warns: WARNING: drivers/gpio/gpiolib.c:4030 at gpiod_set_value+0x44/0x80, CPU#1: kworker/u16:4/61 Hardware name: B&O MAP CA33 Rev f (UNKNOWN) (DT) Workqueue: events_unbound deferred_probe_work_func pc : gpiod_set_value+0x44/0x80 lr : rtl83xx_probe+0x1d8/0x3a0 Call t
In the Linux kernel, the following vulnerability has been resolved: net: ipa: fix stalled modem TX queue after runtime resume ipa_start_xmit() unconditionally stops the TX queue before calling pm_runtime_get(), relying on the wake scheduled by runtime resume (ipa_modem_wake_queue_work()) to restart it once power is ACTIVE. But that work is queued from within the runtime resume callback, before the device's power state reaches RPM_ACTIVE, so it can run while the device is still RPM_RESUMING. The wake is then consumed too early: the transmit it restarts stops the queue again, pm_runtime_get() returns -EINPROGRESS without arranging any future
In the Linux kernel, the following vulnerability has been resolved: net: l2tp: do not propagate multicast notification errors The tunnel create, tunnel modify, session create, and session modify netlink handlers send multicast notifications through helpers that can fail while allocating or encoding a message, or while multicasting it. For tunnel and session create/modify, a notification is sent after the live operation has completed. Returning a best-effort notification error as the command result can therefore report failure for an operation that already committed and can cause callers to retry and accumulate live objects. Keep sending n
Сопоставьте установленный стек и версии со свежими базами уязвимостей.