In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: aspeed_udc: check endpoint DMA allocation
ast_udc_probe() allocates a coherent DMA buffer used as the backing store
for endpoint buffers. ast_udc_init_ep() derives per-endpoint buffer
pointers from udc->ep0_buf, so a failed allocation is dereferenced during
probe.
Check the allocation before endpoint setup. The existing probe error path
called ast_udc_remove(), which unregisters the gadget unconditionally and
is not safe before usb_add_gadget_udc() succeeds. Add a local cleanup
helper for probe failures so pre-registration failures only unwind the
resources th
Без оценкиEPSS 0,21%Нет опубликованного исправления
usb: fix UAF when probe runs concurrent to dyn ID removal
In the Linux kernel, the following vulnerability has been resolved:
usb: fix UAF when probe runs concurrent to dyn ID removal
Dynamic IDs are only guaranteed to be valid when usb_dynids_lock is held,
as remove_id_store can free the node. Thus, make a copy in
usb_probe_interface. Clarify the documentation that the id parameter is
only valid during the probe.
USB serial has the same pattern, but it does not need fixing as the IDs
cannot be removed via sysfs.
Высокий · CVSS 7EPSS 0,16%Нет опубликованного исправления
platform/x86: asus-wmi: fix resource leaks on probe failure
In the Linux kernel, the following vulnerability has been resolved:
platform/x86: asus-wmi: fix resource leaks on probe failure
During driver initialization in asus_wmi_add(), various subsystems are
registered sequentially. However, the error path labels are out of order
relative to the registration sequence.
Specifically:
1. If asus_wmi_custom_fan_curve_init() fails, the driver jumps to
fail_custom_fan_curve. Because this label is placed below fail_sysfs,
it bypasses the cleanup calls for the input device and sysfs groups,
which were successfully registered before, leaking those resources.
2. If asus_screenpad_init() fails, the d
Без оценкиEPSS 0,21%Нет опубликованного исправления
platform/mellanox: mlxbf-pmc: Check ACPI_COMPANION() against NULL
In the Linux kernel, the following vulnerability has been resolved:
platform/mellanox: mlxbf-pmc: Check ACPI_COMPANION() against NULL
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
mlxbf_pmc_probe() passes the result of ACPI_COMPANION() to
acpi_device_hid(), which dereferences it, so force-binding the driver to
a device without an ACPI companion leads to a NULL pointer dereference.
Accordingly, add a requisite ACPI_COMPANION() check again
Без оценкиEPSS 0,17%Нет опубликованного исправления
platform/surface: acpi-notify: Check ACPI companion before use
In the Linux kernel, the following vulnerability has been resolved:
platform/surface: acpi-notify: Check ACPI companion before use
Since every platform driver can be forced to match a device that doesn't
match its list of device IDs because of device_match_driver_override(),
platform drivers that rely on the existence of a device's ACPI companion
object should verify its presence.
san_probe() dereferences the result of ACPI_COMPANION() when installing
the GSBUS address space handler, so force-binding the driver to a device
without an ACPI companion leads to a NULL pointer dereference. The
dereference was introduced when the probe function
In the Linux kernel, the following vulnerability has been resolved:
clk: qcom: camcc-sc8280xp: unregister CAMCC_GDSC_CLK
With the introduction of sync_state support in the clk and pmdomain
subsystems, the following warning happens when the unused clocks are
shutdown in camcc-sc8280xp:
[ 15.408367] titan_top_gdsc status stuck at 'on'
[ 15.408429] WARNING: drivers/clk/qcom/gdsc.c:178 at gdsc_toggle_logic+0x14c/0x160, CPU#2: kworker/u32:1/14
[ 15.408462] Modules linked in: bnep vfat fat ath11k_pci(+) ath11k mac80211 cfg80211 mhi libarc4 snd_soc_wcd938x snd_soc_wcd938x_sdw snd_soc_wcd_classh hci_uart snd_soc_wcd_common
sn
Высокий · CVSS 7.1EPSS 0,17%Нет опубликованного исправления
bpf: Require a BPF cpumask for bpf_cpumask_populate()
In the Linux kernel, the following vulnerability has been resolved:
bpf: Require a BPF cpumask for bpf_cpumask_populate()
bpf_cpumask_populate() writes to its destination with bitmap_copy(), but
the destination is typed as struct cpumask *. That allows the verifier to
accept borrowed cpumask pointers returned by read-only kfuncs, such as
scx_bpf_get_online_cpumask(), as a writable destination.
Make the destination a struct bpf_cpumask * so populate follows the same
ownership rule as the other mutating cpumask kfuncs. Query kfuncs continue
to accept const struct cpumask * inputs.
Без оценкиEPSS 0,18%Нет опубликованного исправления
RDMA/core: Wait for RCU callbacks before unloading ib_core
In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: Wait for RCU callbacks before unloading ib_core
put_gid_ndev() is queued with call_rcu() and implemented in ib_core.
Stopping the workqueues does not drain callbacks already queued, so RCU
could invoke it after the module code has been unloaded.
synchronize_rcu() does not wait for callbacks. Wait for them after all
producers have stopped.
Без оценкиEPSS 0,21%Нет опубликованного исправления
RDMA/mlx5: Drain RCU callbacks during module teardown
In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Drain RCU callbacks during module teardown
devx_free_subscription() can remain queued after the last DevX event file
drops its module reference or an auxiliary driver detaches its devices.
mlx5_ib can then unload before the callback runs.
Registration error unwind has the same risk because driver registration
can attach existing devices before failing. Wait after all drivers have
stopped.
Без оценкиEPSS 0,22%Нет опубликованного исправления
RDMA/ipoib: Drain RCU callbacks during module teardown
In the Linux kernel, the following vulnerability has been resolved:
RDMA/ipoib: Drain RCU callbacks during module teardown
IPoIB reclamation completions can be signaled from inside an RCU callback.
Teardown can wake before the callback returns and unload ib_ipoib while its
code is still executing.
Client registration failure can also remove already-added devices and queue
callbacks. Wait after client and workqueue teardown.
Высокий · CVSS 8.2EPSS 0,54%Нет опубликованного исправления
RDMA/rxe: Avoid reprocessing the current packet after the QP enters the error state
In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Avoid reprocessing the current packet after the QP enters the error state
When do_complete() finds the QP in the error state it returns
RESPST_CHK_RESOURCE. Before commit 49dc9c1f0c7e ("RDMA/rxe: Cleanup
reset state handling in rxe_resp.c") this was the flush loop:
check_resource() had an error-state branch that fetched each remaining
recv WQE and completed it with IB_WC_WR_FLUSH_ERR, without touching
the current packet. That commit removed the error-state branch from
check_resource() (draining is now done at rxe_receiver() entry) but
kept the do_complete() erro
Без оценкиEPSS 0,21%Нет опубликованного исправления
crash_dump: release keyring reference at the correct time
In the Linux kernel, the following vulnerability has been resolved:
crash_dump: release keyring reference at the correct time
restore_dm_crypt_keys_to_thread_keyring() gets a reference to the user
keyring before restoring the saved dm-crypt keys.
The same keyring reference is then passed to add_key_to_keyring() for each
saved key, but add_key_to_keyring() drops that reference on every call.
This is only balanced when exactly one key is restored. With multiple
keys, the keyring reference is dropped too many times and may trigger a
refcount underflow or use-after-free.
When more than five keys are restored, a refcount underflow/use-after-fr
Высокий · CVSS 7.8EPSS 0,18%Нет опубликованного исправления
esp: do not unref managed frag pages in esp_ssg_unref()
In the Linux kernel, the following vulnerability has been resolved:
esp: do not unref managed frag pages in esp_ssg_unref()
esp_ssg_unref() releases the page references held on the source
scatterlist after the AEAD operation completes. It calls
skb_page_unref() on every frag page for an out-of-place transform
(req->src != req->dst), and in the error path of esp_output_tail()
(already_unref == true) on the request's own scatterlist.
This is wrong when the skb carries managed frags
(SKBFL_MANAGED_FRAG_REFS). Managed frags are owned by a zerocopy ubuf
and the skb does not hold a per-frag page reference; io_uring SEND_ZC
with a registered bu
Без оценкиEPSS 0,18%Нет опубликованного исправления
RDMA/rvt: Return NULL after port allocation failure
In the Linux kernel, the following vulnerability has been resolved:
RDMA/rvt: Return NULL after port allocation failure
rvt_alloc_device() deallocates the IB device when its port array cannot
be allocated but then returns the pointer to the released allocation.
Callers treat any non-NULL value as valid and dereference it, resulting
in a use-after-free.
Return NULL immediately after deallocation so callers can propagate the
allocation failure.
Без оценкиEPSS 0,18%Нет опубликованного исправления
RDMA/hfi1: Preserve unit 0 on allocation failure
In the Linux kernel, the following vulnerability has been resolved:
RDMA/hfi1: Preserve unit 0 on allocation failure
hfi1_free_devdata() assumes that the device was inserted into the unit
table and unconditionally erases dd->unit. If xa_alloc_irq() fails, the
zero-initialized unit remains zero, so full cleanup can remove an
unrelated device from index 0.
Release only the rdmavt allocation and return immediately while the unit
table has not acquired the device.
Без оценкиEPSS 0,17%Нет опубликованного исправления
RDMA/hfi1: Free RX data on late probe failure
In the Linux kernel, the following vulnerability has been resolved:
RDMA/hfi1: Free RX data on late probe failure
hfi1_init_dd() allocates the shared AIP/VNIC RX support before returning.
If hfi1_init() or hfi1_register_ib_device() later fails, init_one() tears
down the device data without calling hfi1_free_rx(). This leaks netdev_rx
and its dummy netdev.
Free the RX support after IB unregistration and before postinit_cleanup(),
as done on normal device removal.
Без оценкиEPSS 0,17%Нет опубликованного исправления
media: v4l2-async: Unregister sub-device if asc_list is empty
In the Linux kernel, the following vulnerability has been resolved:
media: v4l2-async: Unregister sub-device if asc_list is empty
When my em28xx USB device that uses the i2c tvp5150 driver is
disconnected, it crashes.
The cause is that the tvp5150 i2c module uses v4l2_async, but
the em28xx driver does not since it predates v4l2_async.
In that corner case sd->asc_list is empty, so
v4l2_async_unregister_subdev() never calls v4l2_device_unregister_subdev().
Modify the code so that, if sd->asc_list is empty,
v4l2_device_unregister_subdev() is still called.
Без оценкиEPSS 0,21%Нет опубликованного исправления
fs/resctrl: Prevent use-after-free in rdtgroup_kn_put()
In the Linux kernel, the following vulnerability has been resolved:
fs/resctrl: Prevent use-after-free in rdtgroup_kn_put()
A struct rdtgroup is reference counted via rdtgroup::waitcount. Callers that
need the structure to remain valid across a sleep (while waiting on acquiring
rdtgroup_mutex) take a reference with rdtgroup_kn_get() and release it with
rdtgroup_kn_put().
The release path is intended to serve as the fallback freer: if the count
drops to zero and the group has already been marked RDT_DELETED,
rdtgroup_kn_put() frees the structure.
The bulk teardown paths free_all_child_rdtgrp() and rmdir_all_sub() resulting
from a resctrl d
Без оценкиEPSS 0,21%Нет опубликованного исправления
fs/resctrl: Fix UAF from worker threads when domains are removed
In the Linux kernel, the following vulnerability has been resolved:
fs/resctrl: Fix UAF from worker threads when domains are removed
The mbm_handle_overflow() and cqm_handle_limbo() workers read event counters
and may sleep while doing so. They are scheduled via delayed_work embedded in
struct rdt_l3_mon_domain. Architecture allocates and frees these domains from
CPU hotplug callbacks under cpus_write_lock(), and the workers acquire
cpus_read_lock() to keep the domain alive across their access.
A use-after-free can occur when a worker is blocked waiting for
cpus_read_lock() while the hotplug core holds cpus_write_lock(): the
architecture f
Без оценкиEPSS 0,22%Нет опубликованного исправления
rpmsg: glink: fix deadlock in endpoint destroy during driver detach
In the Linux kernel, the following vulnerability has been resolved:
rpmsg: glink: fix deadlock in endpoint destroy during driver detach
During driver detach, the device core holds the device mutex throughout
the driver's remove callback chain. When the rpmsg endpoint is
destroyed as part of that teardown, the GLINK endpoint destroy
implementation attempts to unregister the underlying rpmsg device.
That unregistration calls device_del(), which tries to re-acquire the
same device mutex already held higher up the stack, causing rmmod to
hang indefinitely.
The deadlock manifests with the following call chain:
[<0>] device_del+0x44/0x414 <-