p PatchFirst

PatchFirst · Свежие уязвимости

Уязвимости linux-azure-fde · Страница 116

За последние 30 дней в linux-azure-fde опубликовано уязвимостей: 798; в каталоге KEV: 0.

RSS ↗ JSON ↗
Фильтры уязвимостей
Сбросить фильтры

Уязвимостей: 7450

  1. CVE-2026-80783

    Без оценкиEPSS 0,19%Нет опубликованного исправления

    HID: magicmouse: prevent unbounded recursion in magicmouse_raw_event()

    In the Linux kernel, the following vulnerability has been resolved: HID: magicmouse: prevent unbounded recursion in magicmouse_raw_event() magicmouse_raw_event() handles DOUBLE_REPORT_ID (0xf7) packets, which pack two touch reports into one, by splitting the packet and calling itself on each half. The only guard against runaway recursion is a "size < 1" check, which stops zero-sized calls but does not bound the recursion depth. A malicious HID device that matches this driver can send a report starting with DOUBLE_REPORT_ID and filled with the sequence [0xf7, 0x00]. Each level consumes two bytes and recurses on the remainder, so an incoming

    linux-azure-fdeОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  2. CVE-2026-80782

    Без оценкиEPSS 0,19%Нет опубликованного исправления

    HID: magicmouse: do not keep a stale msc->input if no input is claimed

    In the Linux kernel, the following vulnerability has been resolved: HID: magicmouse: do not keep a stale msc->input if no input is claimed magicmouse_input_mapping() caches the first hid_input's input_dev in msc->input while the report descriptor is parsed, and the rest of the driver treats a non-NULL msc->input as proof that an input device was registered. That does not hold on the hid-input error path. If hidinput_connect() fails -- for instance because input_register_device() returns an error -- it unwinds through hidinput_disconnect(), which frees every input_dev it created, including the one cached in msc->input. The failure does not

    linux-azure-fdeОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  3. CVE-2026-80781

    Без оценкиEPSS 0,19%Нет опубликованного исправления

    HID: core: fix OOB read of field->usage in hid_set_field()

    In the Linux kernel, the following vulnerability has been resolved: HID: core: fix OOB read of field->usage in hid_set_field() hid_set_field() hands field->usage + offset to hid_dump_input() before the guard that bounds offset: hid_dump_input(field->report->device, field->usage + offset, value); if (offset >= field->report_count) { hid_err(...); return -1; } Under CONFIG_DEBUG_FS hid_dump_input() dereferences that pointer, with buf = hid_resolv_usage(usage->hid, NULL). The usage[] array is allocated inline with the hid_field in hid_register_field() and holds field->maxusage entries, so an offset past it reads off the end of the k

    linux-azure-fdeОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  4. CVE-2026-80780

    Без оценкиEPSS 0,18%Нет опубликованного исправления

    HID: pidff: fix OOB write when hid->inputs is empty

    In the Linux kernel, the following vulnerability has been resolved: HID: pidff: fix OOB write when hid->inputs is empty hid_pidff_init_with_quirks() derives its input_dev from list_entry(hid->inputs.next, struct hid_input, list) without first checking that hid->inputs is non-empty. The list member of struct hid_input is at offset 0, so on an empty list list_entry() yields &hid->inputs itself and the following hidinput->input load reads an unrelated member of struct hid_device. dev is then a type-confused pointer, and force-feedback init writes through it: each set_bit(FF_*, dev->ffbit) stores 8 bytes at dev + 192, past the end of the o

    linux-azure-fdeОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  5. CVE-2026-80774

    Без оценкиEPSS 0,17%Нет опубликованного исправления

    HID: asus: fix missing hid_is_usb() check

    In the Linux kernel, the following vulnerability has been resolved: HID: asus: fix missing hid_is_usb() check to_usb_interface() can only be used on a hid_device whose parent is really USB; uhid can create devices that identify as being on BUS_USB, but don't actually have a USB parent. Fix the use of to_usb_interface() without a hid_is_usb() check. I have verified that it is currently possible to trigger a kernel splat due to this bug in an ASAN build, and that this commit fixes the issue.

    linux-azure-fdeОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  6. CVE-2026-80772

    Без оценкиEPSS 0,21%Нет опубликованного исправления

    HID: nintendo: fix out-of-bounds read in joycon_ctlr_read_handler()

    In the Linux kernel, the following vulnerability has been resolved: HID: nintendo: fix out-of-bounds read in joycon_ctlr_read_handler() joycon_ctlr_read_handler() casts an incoming HID input report to struct joycon_input_report and parses it, guarding the cast only with a 12-byte length check: if (size >= 12) /* make sure it contains the input report */ joycon_parse_report(ctlr, (struct joycon_input_report *)data); struct joycon_input_report is 49 bytes: a 13-byte header followed by a union whose IMU arm is 36 bytes. For an IMU report joycon_parse_report() -> joycon_parse_imu_report() walks that union (struct offsets 13..48), so a repo

    linux-azure-fdeОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  7. CVE-2026-80771

    Без оценкиEPSS 0,21%Нет опубликованного исправления

    HID: nintendo: register input device after capabilities are set

    In the Linux kernel, the following vulnerability has been resolved: HID: nintendo: register input device after capabilities are set input_register_device() exposes the device to userspace immediately. In joycon_input_create() it was called before joycon_config_rumble() configures the FF_RUMBLE capability and the memless force-feedback device, so a concurrent EVIOCSFF could dereference a NULL dev->ff. Registering early also means the initial udev event lacks button and axis information, which can make input managers ignore the device. Move input_register_device() to the end of joycon_input_create(), after all capabilities, the IMU input de

    linux-azure-fdeОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  8. CVE-2026-80770

    Без оценкиEPSS 0,21%Нет опубликованного исправления

    HID: nintendo: stop device IO before hid_hw_stop on probe failure

    In the Linux kernel, the following vulnerability has been resolved: HID: nintendo: stop device IO before hid_hw_stop on probe failure nintendo_hid_probe() calls hid_device_io_start() before joycon_init() and joycon_leds_create(). If either fails, the error path jumps to err_close which calls hid_hw_close()/hid_hw_stop() without first calling hid_device_io_stop(). hid_hw_stop() does not stop device IO, so hid_input_report() may still run and access driver data that is being torn down, resulting in a use-after-free. Add an err_io_stop label that calls hid_device_io_stop() before hid_hw_close(), and point the two post-io_start error paths a

    linux-azure-fdeОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  9. CVE-2026-80768

    Без оценкиEPSS 0,18%Нет опубликованного исправления

    HID: ft260: fix stack-use-after-return write in I2C read race

    In the Linux kernel, the following vulnerability has been resolved: HID: ft260: fix stack-use-after-return write in I2C read race ft260_i2c_read() points dev->read_buf at a caller-supplied buffer (often an on-stack variable), arms a completion and waits up to five seconds for the device to return the data. The HID input callback ft260_raw_event() runs in the input/IRQ path, independent of the dev->lock mutex held by the read path, and copies the device-supplied payload into dev->read_buf after a plain NULL check. These two paths share read_buf, read_idx and read_len with no serialization. If the device delays its response until the read ti

    linux-azure-fdeОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  10. CVE-2026-80767

    Без оценкиEPSS 0,19%Нет опубликованного исправления

    HID: sensor: custom: Fix use-after-free in enable_sensor

    In the Linux kernel, the following vulnerability has been resolved: HID: sensor: custom: Fix use-after-free in enable_sensor enable_sensor_store() can call set_power_report_state(), which dereferences sensor_inst->power_state and sensor_inst->report_state. These pointers refer to entries in sensor_inst->fields. Create the field attributes before exposing the enable_sensor sysfs attribute, so enable_sensor cannot be accessed before the state it depends on has been initialized. On remove, delete enable_sensor before freeing the field attributes, so a concurrent sysfs write cannot dereference freed memory through power_state or report_state.

    linux-azure-fdeОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  11. CVE-2026-80766

    Без оценкиEPSS 0,18%Нет опубликованного исправления

    HID: uclogic: fix use-after-free of inrange_timer on remove

    In the Linux kernel, the following vulnerability has been resolved: HID: uclogic: fix use-after-free of inrange_timer on remove uclogic_remove() cancels the pen in-range timer and then stops the device: timer_delete_sync(&drvdata->inrange_timer); hid_hw_stop(hdev); timer_delete_sync() only guarantees the timer is idle at that instant. uclogic_raw_event_pen() keeps delivering pen reports until hid_hw_stop() stops the transport several lines later, and every report with pen->inrange == UCLOGIC_PARAMS_PEN_INRANGE_NONE re-arms the timer: mod_timer(&drvdata->inrange_timer, jiffies + msecs_to_jiffies(100)); A report landing between the tim

    linux-azure-fdeОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  12. CVE-2026-80765

    Без оценкиEPSS 0,19%Нет опубликованного исправления

    HID: hyperv: validate initial device info bounds

    In the Linux kernel, the following vulnerability has been resolved: HID: hyperv: validate initial device info bounds The Hyper-V synthetic HID host supplies SYNTH_HID_INITIAL_DEVICE_INFO messages that contain a HID descriptor followed by the report descriptor bytes. mousevsc_on_receive_device_info() trusts bLength and wDescriptorLength without checking that the received packet contains both byte ranges. A malformed host or backend message can therefore make the guest read past the received VMBus packet while copying the report descriptor. Pass the received initial-device-info size into the parser and reject descriptor lengths that exceed t

    linux-azure-fdeОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  13. CVE-2026-80764

    Без оценкиEPSS 0,17%Нет опубликованного исправления

    Bluetooth: hci_event: fix LE list UAF on reset

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_event: fix LE list UAF on reset hci_cc_reset() clears the LE accept and resolving lists without taking hdev->lock. Other command-complete handlers serialize updates to these lists with that lock, and the debugfs readers hold it while walking them. This permits the reset completion and a debugfs read to interleave as follows: hci_rx_work debugfs reader ----------- -------------- lock hdev->lock fetch current entry list_del(entry) kfree(entry)

    linux-azure-fdeОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  14. CVE-2026-80763

    Без оценкиEPSS 0,17%Нет опубликованного исправления

    Bluetooth: hci_event: validate LE Set CIG Parameters response

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_event: validate LE Set CIG Parameters response The Command Complete dispatch validates only the fixed part of the LE Set CIG Parameters response. After that part is pulled from the skb, hci_cc_le_set_cig_params() trusts num_handles and reads each entry in the trailing handle array. Matching num_handles against the command's num_cis does not guarantee that the response contains the advertised handles. A truncated response from a malfunctioning controller can therefore make the handler read beyond the skb data. Validate that the remaining skb data contains al

    linux-azure-fdeОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  15. CVE-2026-80762

    Без оценкиEPSS 0,17%Нет опубликованного исправления

    Bluetooth: hci_sync: Fix accept list UAF during suspend

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: Fix accept list UAF during suspend hci_update_event_filter_sync() walks hdev->accept_list while sending a synchronous HCI command for each remote-wakeup device. The suspend path holds hdev->req_lock, but accept-list updates are serialized by hdev->lock. Consequently, remove_device() can free the current list entry during the controller wait. The following interleaving causes the use-after-free: hci_update_event_filter_sync() remove_device() fetch accept-list entry hci_set_event_filter_sync() wait for controller response hci_dev_lock()

    linux-azure-fdeОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  16. CVE-2026-80761

    Средний · CVSS 4.8EPSS 0,21%Нет опубликованного исправления

    Bluetooth: ISO: zero the sockaddr before returning it in getname

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: zero the sockaddr before returning it in getname iso_sock_getname() fills a struct sockaddr_iso in place and returns its size without clearing it first, so bytes it does not write are copied to user space from the kernel stack. The getsockname(2) and getpeername(2) paths both run through do_getsockname(), which hands getname() an uninitialized sockaddr_storage on the stack and copies back up to the number of bytes getname() returns, so the driver has to initialize every byte it accounts for. Two ranges are left uninitialized: - struct sockaddr_iso is 10

    linux-azure-fdeОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  17. CVE-2026-80757

    Без оценкиEPSS 0,17%Нет опубликованного исправления

    selinux: reject a class permission count below its inherited common

    In the Linux kernel, the following vulnerability has been resolved: selinux: reject a class permission count below its inherited common security_get_permissions() maps an inherited common's permissions into an array sized by the class's own permissions.nprim, but class_read() takes that nprim verbatim from the policy image and never checks that it covers the common. A class that inherits a common of N permissions while declaring a smaller nprim is accepted, and on load the common's permissions are written past the class-sized array -- an out-of-bounds heap write. Reject a class whose permission count is below its inherited common's. Well-

    linux-azure-fdeОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  18. CVE-2026-80756

    Без оценкиEPSS 0,17%Нет опубликованного исправления

    selinux: do not cancel a policy conversion that never started

    In the Linux kernel, the following vulnerability has been resolved: selinux: do not cancel a policy conversion that never started sel_write_load() calls selinux_policy_cancel() when sel_make_policy_nodes() fails, and that helper dereferences the outgoing policy to cancel its sidtab conversion. On the first policy load there is no outgoing policy: security_load_policy() returns early for that case, before it converts anything, and state->policy is still NULL. A first load that fails while building the selinuxfs tree therefore takes a NULL dereference in selinux_policy_cancel(), reached from a write(2) to /sys/fs/selinux/load. Skip the cance

    linux-azure-fdeОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  19. CVE-2026-80755

    Без оценкиEPSS 0,16%Нет опубликованного исправления

    selinux: reject a permission value exceeding the class permission count

    In the Linux kernel, the following vulnerability has been resolved: selinux: reject a permission value exceeding the class permission count perm_read() bounds a permission value by SEL_VEC_MAX but never by the nprim of the owning class or common, which is taken verbatim from the policy image. security_get_permissions() then writes perms[value - 1] into an nprim-sized kcalloc() array, so a class declaring fewer permissions than its largest permission value drives an out-of-bounds heap write. The top-level symbol tables are validated this way; the nested per-class permission table is not. Reject a permission whose value exceeds nprim, whic

    linux-azure-fdeОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  20. CVE-2026-80754

    Высокий · CVSS 7.8EPSS 0,12%Нет опубликованного исправления

    Input: synaptics-rmi4 - fix F55 transmitter electrode count typo

    In the Linux kernel, the following vulnerability has been resolved: Input: synaptics-rmi4 - fix F55 transmitter electrode count typo During F55 sensor detection, the transmitter (TX) electrode count was incorrectly assigned the value of the receiver (RX) electrode count due to copy-paste typos. This incorrect value was then propagated to the driver data and used by F54 to determine the diagnostics report size. On devices with more RX than TX electrodes, this inflated the perceived TX count, leading to incorrect report size calculations and potential out-of-bounds buffer accesses. Fix the typos by correctly assigning the TX electrode count

    linux-azure-fdeОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

Проверьте свой сервер

Сопоставьте установленный стек и версии со свежими базами уязвимостей.

Проверьте свой сервер →