p PatchFirst

PatchFirst · Свежие уязвимости

Уязвимости linux-azure · Страница 128

За последние 30 дней в linux-azure опубликовано уязвимостей: 635; в каталоге KEV: 0.

RSS ↗ JSON ↗
Фильтры уязвимостей
Сбросить фильтры

Уязвимостей: 10261

  1. CVE-2026-74654

    Без оценкиEPSS 0,18%Нет опубликованного исправления

    serial: 8250_dma: Clear stale RX state on shutdown

    In the Linux kernel, the following vulnerability has been resolved: serial: 8250_dma: Clear stale RX state on shutdown serial8250_release_dma() terminates RX DMA and releases the channel, but leaves rx_running set. If the port is closed while an RX transfer is active, the stale state remains while rxchan is NULL until the channel is requested again on the next open. The DesignWare BUSY workaround added by commit a7b9ce39fbe4 ("serial: 8250_dw: Ensure BUSY is deasserted") calls serial8250_rx_dma_flush() from the LCR write path during startup. This happens before serial8250_request_dma() obtains a new RX channel. On reopen, the stale rx_r

    linux-azureОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  2. CVE-2026-74653

    Без оценкиEPSS 0,17%Нет опубликованного исправления

    serial: 8250_of: clear stuck empty-FIFO RX-timeout on LPC32xx

    In the Linux kernel, the following vulnerability has been resolved: serial: 8250_of: clear stuck empty-FIFO RX-timeout on LPC32xx The NXP LPC32xx UART (PORT_LPC3220) can latch an RX character-timeout interrupt while the RX FIFO is empty: IIR reports UART_IIR_RX_TIMEOUT (0x0c) but LSR.DR is clear. A character timeout is only cleared by reading RHR, but serial8250_rx_chars() reads RHR only when LSR.DR is set, so nothing ever clears the condition. The interrupt is level-triggered and re-fires immediately, so on a single-core ARM926 the resulting interrupt storm livelocks the CPU. It is reproducible when userspace repeatedly opens the front-pa

    linux-azureОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  3. CVE-2026-74651

    Высокий · CVSS 8.1EPSS 0,27%Нет опубликованного исправления

    staging: rtl8723bs: fix OOB read in rtw_get_wpa_ie()

    In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix OOB read in rtw_get_wpa_ie() rtw_get_wpa_ie() reads bytes at fixed offsets into a vendor-specific information element without checking that the element is long enough, causing an out-of-bounds read for a short trailing IE. The function locates a vendor-specific IE (EID 221) with rtw_get_ie() and then compares a 4-byte OUI+type at pbuf + 2 and reads a 2-byte version word at pbuf + 6. Those accesses require the IE body to be at least 6 bytes, but rtw_get_ie() only guarantees that the element fits within the buffer; it does not enforce a minimum body l

    linux-azureОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  4. CVE-2026-74650

    Без оценкиEPSS 0,18%Нет опубликованного исправления

    staging: rtl8723bs: fix OOB read in WMM_param_handler()

    In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix OOB read in WMM_param_handler() WMM_param_handler() copies a fixed-size WMM parameter element out of a received information element without checking that the element is long enough, causing an out-of-bounds read for a short WMM IE. The handler reads sizeof(struct WMM_para_element) (18) bytes at pIE->data + 6, so it requires pIE->length to be at least 24 (WLAN_WMM_LEN), but it never validates the length. Two of its three callers reach it after matching only the WMM OUI: OnAssocRsp() in rtw_mlme_ext.c matches a 6-byte OUI, and join_cmd_hdl() matches a

    linux-azureОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  5. CVE-2026-74649

    Высокий · CVSS 8.8EPSS 0,29%Нет опубликованного исправления

    staging: rtl8723bs: fix missing shared-key auth challenge length check

    In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix missing shared-key auth challenge length check The WEP shared-key authentication handler uses the challenge-text element's attacker-controlled length without checking it against the fixed 128-byte chg_txt buffer. In OnAuthClient() the length from rtw_get_ie() - up to 255 - is used to perform memcpy() into the 128-byte pmlmeinfo->chg_txt, so a malicious AP sending a malformed WLAN_EID_CHALLENGE element can overflow/underfill chg_txt by up to 127 bytes. It is reachable over the air, before association, during shared-key authentication. In the case of

    linux-azureОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  6. CVE-2026-74648

    Высокий · CVSS 7.8EPSS 0,13%Нет опубликованного исправления

    staging: rtl8723bs: validate monitor transmit frame lengths

    In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: validate monitor transmit frame lengths rtw_cfg80211_monitor_if_xmit_entry() removes the radiotap header and then reads the 802.11 frame control field without checking that a base 802.11 header remains. The data path also pulls the calculated 802.11, QoS and SNAP header span before confirming that the skb contains it. A truncated frame can therefore cause out-of-bounds reads or leave insufficient data for the Ethernet address writes. Reject frames that do not contain the base 802.11 header and data frames that do not contain their complete calculated h

    linux-azureОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  7. CVE-2026-74647

    Высокий · CVSS 7.8EPSS 0,13%Нет опубликованного исправления

    misc: fastrpc: Remove buffer from list prior to unmap operation

    In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: Remove buffer from list prior to unmap operation fastrpc_req_munmap_impl() is called to unmap any buffer. The buffer is getting removed from the list after it is unmapped from DSP. This can create potential race conditions if multiple threads invoke unmap concurrently, where one thread may remove the entry from the list while another thread's unmap operation is still ongoing. Fix this by removing the buffer entry from the list before calling the unmap operation. If the unmap fails, the entry is re-added to the list so that userspace can retry the unmap, or a

    linux-azureОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  8. CVE-2026-74646

    Высокий · CVSS 7.8EPSS 0,18%Нет опубликованного исправления

    misc: fastrpc: take fl->lock when moving mmaps on interrupted invoke

    In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: take fl->lock when moving mmaps on interrupted invoke When an invoke is interrupted by a signal, wait_for_completion_interruptible() returns -ERESTARTSYS and fastrpc_internal_invoke() moves every buffer from fl->mmaps onto cctx->invoke_interrupted_mmaps. This list_del()/list_add_tail() walk runs without holding fl->lock, the lock that serialises fl->mmaps in fastrpc_req_mmap() and fastrpc_req_munmap() everywhere else. Take fl->lock around the move, matching every other fl->mmaps accessor.

    linux-azureОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  9. CVE-2026-74641

    Высокий · CVSS 7.8EPSS 0,13%Нет опубликованного исправления

    ALSA: usx2y: bound the hwdep mmap fault offset

    In the Linux kernel, the following vulnerability has been resolved: ALSA: usx2y: bound the hwdep mmap fault offset snd_us428ctls_vm_fault() turns the faulting page offset into a kernel address with no bound of any kind: offset = vmf->pgoff << PAGE_SHIFT; vaddr = (char *)(...)->us428ctls_sharedmem + offset; page = virt_to_page(vaddr); get_page(page); vmf->page = page; return 0; snd_us428ctls_mmap() checks only the length of the mapping, never the offset, and us428ctls_sharedmem is a single page from alloc_pages_exact(). For a character device file_mmap_size_max() returns ULONG_MAX, so the mm layer imposes no ceiling either. Every

    linux-azureОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  10. CVE-2026-74638

    Средний · CVSS 5.7EPSS 0,17%Нет опубликованного исправления

    drm/v3d: Serialize the scheduler timeout handlers

    In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Serialize the scheduler timeout handlers V3D exposes several independent hardware queues (BIN, RENDER, TFU and CSD) but has only a single, global reset. A timeout on any one queue therefore has to stop, reset and restart the schedulers of every other queue as well. That makes concurrent timeout handlers unsafe. `reset_lock` was never able to make them safe, as a driver-side lock can only cover the driver's &drm_sched_backend_ops.timedout_job callback. The scheduler handles the timed out job and its pending list around that callback, outside of the driver's control

    linux-azureОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  11. CVE-2026-74637

    Высокий · CVSS 7.8EPSS 0,13%Нет опубликованного исправления

    perf/core: Fix group leader use-after-free after sibling detach

    In the Linux kernel, the following vulnerability has been resolved: perf/core: Fix group leader use-after-free after sibling detach perf_group_detach() handles leader and sibling detach differently. When the group leader is detached, all siblings are promoted to singleton events and their group_leader pointer is reset to themselves. When a sibling is detached, it is removed from the leader's sibling_list, but its group_leader pointer is left pointing at the old leader. That is harmless when the sibling is being closed and freed immediately, as in the DETACH_DEAD path. It is not safe when the sibling is detached but kept alive, such as duri

    linux-azureОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  12. CVE-2026-74636

    Без оценкиEPSS 0,17%Нет опубликованного исправления

    tracing: Fix race between update_event_fields and, event_define_fields

    In the Linux kernel, the following vulnerability has been resolved: tracing: Fix race between update_event_fields and, event_define_fields The following sequence may leads race between event_define_fields() and update_event_fields(): CPU0 (loads module A) CPU1 (loads module B) =============================== =============================== load_module(A) load_module(B) notifier_call_chain notifier_call_chain trace_module_notify trace_module_notify mutex_lock(&event_mutex) trace_event_update_all()

    linux-azureОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  13. CVE-2026-74635

    Высокий · CVSS 7.8EPSS 0,13%Нет опубликованного исправления

    fbdev: bitblit: bound-check glyph index in bit_cursor()

    In the Linux kernel, the following vulnerability has been resolved: fbdev: bitblit: bound-check glyph index in bit_cursor() bit_cursor() fetches the glyph under the cursor with c = scr_readw(vc_pos); src = vc_font.data + ((c & charmask) * w * height); where charmask is 0x1ff when vc_hi_font_mask is set. The screen buffer value comes directly from scr_readw() and may be larger than the current font's glyph count. Syzkaller triggers this via vcs_write(). The Call Trace shows vcs_write() in vc_screen.c writing an arbitrary 16-bit value with writev() to /dev/vcsa, which vcs_write_buf() in vc_screen.c stores via vcs_scr_writew() without che

    linux-azureОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  14. CVE-2026-74634

    Высокий · CVSS 7.8EPSS 0,12%Нет опубликованного исправления

    ring-buffer: Prevent subbuf order change when resizing is disabled

    In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Prevent subbuf order change when resizing is disabled Because ring_buffer_subbuf_order_set() frees buffer pages, we can't allow it when resizing is disabled. A non-consuming reader is at risk of use-after-free (rb_advance_iter()). Return -EBUSY on resize_disabled, matching ring_buffer_resize() behaviour.

    linux-azureОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  15. CVE-2026-74632

    Высокий · CVSS 7.8EPSS 0,13%Нет опубликованного исправления

    mm/huge_memory: fix huge_zero_pfn race

    In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: fix huge_zero_pfn race Patch series "mm/huge_memory: fix huge_zero_pfn race", v2. There is a subtle race in the reference-counted huge_zero_folio implementation. The fast path atomic logic fails to account for the fact that the shrinker (which drops the final huge_zero_refcount pin) can overwrite huge_zero_pfn with the ~0UL sentinel value in shrink_huge_zero_folio_scan() after a racing get_huge_zero_folio() installed a valid value there. This results in huge_zero_folio being correctly set but huge_zero_pfn being set incorrectly and thus is_huge_zero_pfn()

    linux-azureОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  16. CVE-2026-74631

    Высокий · CVSS 8.4EPSS 0,14%Нет опубликованного исправления

    net: smc: fix splice entry lifetime imbalance in smc_rx_splice

    In the Linux kernel, the following vulnerability has been resolved: net: smc: fix splice entry lifetime imbalance in smc_rx_splice smc_rx_splice() passes pages to splice_to_pipe() before taking the references that cover the lifetime of each splice entry. In the VM-backed RMB path, splice_to_pipe() may drop unqueued entries through smc_rx_spd_release(), while queued entries are released later via the pipe buffer callback. The old post-splice accounting also derives the number of queued VM pages from an offset mutated while building the descriptor, and a multi-page splice pairs one sock_hold() with multiple sock_put() calls. Take the page a

    linux-azureОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  17. CVE-2026-74630

    Высокий · CVSS 7.8EPSS 0,13%Нет опубликованного исправления

    ipv6: prevent in6_dev_get() from resurrecting inet6_dev

    In the Linux kernel, the following vulnerability has been resolved: ipv6: prevent in6_dev_get() from resurrecting inet6_dev in6_dev_get() reads dev->ip6_ptr under RCU and then unconditionally increments its refcount. Device teardown can clear the pointer and drop the last reference between these operations. The increment then resurrects an object whose RCU free has already been queued, so callers can use it after it is freed. Use refcount_inc_not_zero() and return NULL when the object has already reached zero. RCU keeps the memory accessible through the attempted reference acquisition, and a successful increment pins the object for the cal

    linux-azureОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  18. CVE-2026-74628

    Критический · CVSS 9.8EPSS 0,5%Нет опубликованного исправления

    net/x25: fix use-after-free of the socket by its timers

    In the Linux kernel, the following vulnerability has been resolved: net/x25: fix use-after-free of the socket by its timers The x25 timers are armed with mod_timer() and cancelled with timer_delete(), so a pending timer holds no reference on the socket and a cancel does not wait for a callback already running on another CPU. x25_heartbeat_expiry() also rearms unconditionally, so it can reinstall sk->sk_timer after __x25_destroy_socket() has passed its cancel point. The following __sock_put() frees the socket while the timer is still queued, and the next expiry uses freed memory. KASAN reports a slab-use-after-free on the kmalloc-2k object

    linux-azureОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  19. CVE-2026-74626

    Высокий · CVSS 7.5EPSS 0,5%Нет опубликованного исправления

    NTB: ntb_netdev: Preserve RX queue depth on allocation failure

    In the Linux kernel, the following vulnerability has been resolved: NTB: ntb_netdev: Preserve RX queue depth on allocation failure ntb_netdev_rx_handler() hands the received skb to the network stack before allocating its replacement. If the allocation fails, nothing is reposted. Every failure therefore takes one buffer out of the RX queue while the interface remains up, and enough failures eventually stall reception. A retry path could refill the queue later, but ntb_netdev has none. Allocate the replacement first instead. If that fails, drop the packet and repost the same skb. This keeps the queue full and lets packet delivery resume as s

    linux-azureОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  20. CVE-2026-74625

    Высокий · CVSS 7.5EPSS 0,5%Нет опубликованного исправления

    netfilter: bridge: release template ct on non-IP path

    In the Linux kernel, the following vulnerability has been resolved: netfilter: bridge: release template ct on non-IP path A bridge nftables ct zone set rule can attach a conntrack template to an skb before nf_ct_bridge_pre() sees it. For non-IPv4 and non-IPv6 EtherTypes, nf_ct_bridge_pre() currently overwrites skb->_nfct with IP_CT_UNTRACKED without releasing the existing template reference. That makes the per-cpu template, and any temporary templates allocated for concurrent use, unreachable and leaks memory until the host runs out of slab. Reset the skb conntrack state before marking the frame untracked so the existing template referenc

    linux-azureОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

Проверьте свой сервер

Сопоставьте установленный стек и версии со свежими базами уязвимостей.

Проверьте свой сервер →