Уязвимости linux-gkeop · Страница 107

power: supply: lp8727: fix use-after-free in lp8727_release_irq()

In the Linux kernel, the following vulnerability has been resolved: power: supply: lp8727: fix use-after-free in lp8727_release_irq() lp8727_isr_func(), the threaded IRQ handler, is the only caller that arms pchg->work via schedule_delayed_work(). lp8727_release_irq() currently cancels the work before freeing the IRQ, so an IRQ delivered in between can re-arm the work through the threaded handler. After .remove returns the devm layer frees pchg while lp8727_delayed_func() may still run and dereference it. Free the IRQ first so the threaded handler is quiesced and can no longer queue work, then cancel the delayed work to drain the final g

power: supply: lp8788-charger: fix use-after-free on remove

In the Linux kernel, the following vulnerability has been resolved: power: supply: lp8788-charger: fix use-after-free on remove lp8788_charger_remove() flushes charger_work before unregistering the IRQs. An IRQ thread can queue charger_work after flush_work() has returned. The work can then run after devres frees pchg and dereference it in lp8788_charger_event(). Unregister the IRQs first. free_irq() waits for any running threaded handler, so no handler can queue more work afterwards. Then use cancel_work_sync() to cancel pending work or wait for running work to finish. This issue was found by an in-house static analysis tool.

power: supply: qcom_battmgr: fix use-after-free

In the Linux kernel, the following vulnerability has been resolved: power: supply: qcom_battmgr: fix use-after-free qcom_battmgr_pdr_notify() queues enable_work when the PMIC GLINK service comes up, and the worker recovers battmgr through container_of() to issue firmware requests. The PMIC GLINK client stays on the client list until its devres release action runs, so a PDR notification can keep queueing the work, and a pending or running worker can access battmgr after devres frees it. Make enable_work device-managed with devm_work_autocancel(), registered before the PMIC GLINK client is allocated. The devres cleanup then releases the clie

power: supply: qcom_battmgr: terminate the strings from firmware

In the Linux kernel, the following vulnerability has been resolved: power: supply: qcom_battmgr: terminate the strings from firmware The qcom_battmgr_sc8280xp_strcpy() takes a Pascal-style string when the firmware sends one. Otherwise it copies all BATTMGR_STRING_LEN bytes and leaves the destination without a terminator. Those destinations are model_number, serial_number and oem_info, each BATTMGR_STRING_LEN and declared next to each other. They go out to user space as val->strval, which power_supply_format_property() prints with "%s", so a firmware string that fills the whole field makes that read run into the following members. Use strs

power: supply: rt9455: quiesce delayed work before teardown

In the Linux kernel, the following vulnerability has been resolved: power: supply: rt9455: quiesce delayed work before teardown The threaded IRQ handler can queue pwr_rdy_work, max_charging_time_work and batt_presence_work. pwr_rdy_work and batt_presence_work can also queue max_charging_time_work, while batt_presence_work can requeue itself. rt9455_remove() cancels max_charging_time_work before batt_presence_work. The latter can therefore queue max_charging_time_work after it has already been cancelled: rt9455_remove() workqueue cancel pwr_rdy_work cancel max_charging_time_work

power: supply: twl4030_charger: cancel workers via devm

In the Linux kernel, the following vulnerability has been resolved: power: supply: twl4030_charger: cancel workers via devm bci is devm-allocated. Two workers (bci->work and bci->current_worker) dereference it. twl4030_bci_remove() disables charging and masks interrupts. It cancels neither worker. A worker pending at remove() can run after devm frees bci. The USB transceiver comes from devm_usb_get_phy_by_node(). devm unregisters its notifier only after remove() returns. A cancel_work_sync() in remove() can then race a notifier reschedule. devm_work_autocancel() and devm_delayed_work_autocancel() avoid that. They cancel the workers during

power: supply: ucs1002: fix use-after-free on remove

In the Linux kernel, the following vulnerability has been resolved: power: supply: ucs1002: fix use-after-free on remove ucs1002 has no remove callback, so unbind runs entirely through devm. The alert IRQ handler queues the health_poll delayed work, and the work reschedules itself while the chip reports a bad-health condition. devm frees the alert IRQ, which only synchronizes the handler; it does not cancel the delayed work, which can then run after devm frees the driver data and dereference it. Register health_poll with devm_delayed_work_autocancel() before the alert IRQ is requested. devm then frees the IRQ before cancelling the work,

power: supply: max17040: propagate register read errors

In the Linux kernel, the following vulnerability has been resolved: power: supply: max17040: propagate register read errors max17040_get_vcell() and max17040_get_soc() ignore errors returned by regmap_read(). When an I2C transfer fails, the uninitialized register value is converted and reported to userspace as a valid voltage or state of charge. The polling worker can also replace the cached state of charge with the bogus value and emit a spurious change event. Propagate read errors through the power supply get_property callback and keep the last valid cached state of charge when polling fails.

power: supply: max17040: synchronize work cancellation on suspend

In the Linux kernel, the following vulnerability has been resolved: power: supply: max17040: synchronize work cancellation on suspend max17040_work() requeues itself after every poll. cancel_delayed_work() only cancels a pending instance and does not wait for a callback that is already running. If system suspend races with the polling callback, the callback can continue accessing the fuel gauge and requeue itself after the suspend callback returns. Use cancel_delayed_work_sync() to ensure polling is quiesced before suspend completes.

s390/cpum_cf: Handle CPU hotplug via prepare/dead callbacks

In the Linux kernel, the following vulnerability has been resolved: s390/cpum_cf: Handle CPU hotplug via prepare/dead callbacks The command 'perf stat -e cycles -- <command>' crashes the kernel when CPUs are hotplug added during that run. Root cause is the allocation of struct cpu_cf_events at first event initialization. The allocation is dynamic and the first event that has task context creates such a structure for each online CPU. This is not sufficient. CPUs may be offline during event creation and can be set online during the perf run time. For example commands # echo 0 > /sys/devices/system/cpu/cpu1/online # perf stat -e cycles -i

• Обновитесь до 6.8.0-1052.56

s390/dasd: Do not complete a failed ESE read as successful

In the Linux kernel, the following vulnerability has been resolved: s390/dasd: Do not complete a failed ESE read as successful dasd_int_handler() completes an NRF read of an unallocated ESE track by calling ese_read() and unconditionally marking the request DASD_CQR_SUCCESS. dasd_eckd_ese_read() can return an error before it has zeroed the destination buffer: a failed sense-data parse or a current track outside the requested range both return early, leaving the destination pages untouched. The request is still completed successfully, so the block layer is handed stale / uninitialized memory instead of zeros. Check the ese_read() return val

s390/dasd: Guard sysfs discipline callbacks against unallocated private data

In the Linux kernel, the following vulnerability has been resolved: s390/dasd: Guard sysfs discipline callbacks against unallocated private data Several sysfs show/store handlers call a discipline callback that dereferences device->private, either directly or through the DASD_DEFINE_ATTR() macro. During dasd_generic_set_online() the discipline is assigned before check_device() allocates device->private, so an unprivileged read of one of these world-readable attributes in that window dereferences a NULL pointer and panics. Guard the dereference inside each callback that actually touches device->private.

s390/dasd: Propagate partial completion length across ERP recovery

In the Linux kernel, the following vulnerability has been resolved: s390/dasd: Propagate partial completion length across ERP recovery dasd_default_erp_postaction() copies the timing and device state from the finished ERP request back to the original request but drops proc_bytes. A request that was partially completed, an ESE read of a not-yet-allocated track returns fewer bytes than requested, and then recovered through the ERP chain loses its partial-completion length. __dasd_cleanup_cqr() then sees proc_bytes == 0 and completes the whole request instead of requeueing the remainder, silently returning zeroed data for the part that was nev

iommu/msm: Unwind probe state on registration failure

In the Linux kernel, the following vulnerability has been resolved: iommu/msm: Unwind probe state on registration failure msm_iommu_probe() adds its devm-managed IOMMU object to qcom_iommu_devices before adding the IOMMU sysfs device and registering it with the IOMMU core. If iommu_device_sysfs_add() fails, probe returns with the object still on qcom_iommu_devices. The driver core then releases the devm allocation, leaving a dangling list entry that later list walks may dereference. If iommu_device_register() fails, the same dangling list entry remains and the sysfs device is left registered as well. Unwind the sysfs device and global li

iommu/sva: Set handle->dev before the SVA handle is visible

In the Linux kernel, the following vulnerability has been resolved: iommu/sva: Set handle->dev before the SVA handle is visible iommu_attach_device_pasid() installs the new SVA attach handle in the group PASID lookup before iommu_sva_bind_device() returns. A concurrent bind can therefore find and reuse the same handle after iommu_sva_lock is dropped. handle->dev was initialized after dropping iommu_sva_lock. This leaves a window where a racing bind can return a handle whose dev pointer is still NULL. A subsequent iommu_sva_unbind_device() can then dereference it via handle->dev->iommu_group. Initialize handle->dev before releasing iommu_s

iommu/vt-d: Force requesting ACS when tboot is enabled

In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Force requesting ACS when tboot is enabled Currently the conditions of requesting ACS in detect_intel_iommu() don't include tboot, leading to a possible misconfiguration with ACS disabled (e.g. due to user opts) while iommu is later forced on by tboot_force_iommu(). Fix it by checking tboot in detect_intel_iommu().

platform/x86: dell-wmi-sysman: Don't hex dump attribute security buffer

In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell-wmi-sysman: Don't hex dump attribute security buffer set_attribute() populates the security area of the BIOS attribute request buffer with the current admin password via populate_security_buffer(), then dumps the whole request buffer with print_hex_dump_bytes(). This can expose the plaintext admin password in the kernel log. The same issue was fixed for the password attribute path by commit d1a196e0a6dc ("platform/x86: dell-wmi-sysman: Don't hex dump plaintext password data"). Remove the remaining dump from the BIOS attribute path.

platform/x86: ISST: Validate level in perf mask ioctls

In the Linux kernel, the following vulnerability has been resolved: platform/x86: ISST: Validate level in perf mask ioctls isst_if_get_perf_level_mask() and isst_if_get_base_freq_mask() use the user-provided level as an index into perf_levels[] via _read_pp_level_info() and _read_bf_level_info(), but neither helper validates it first. The adjacent level-info helpers reject levels above max_level before reading the same per-level register block. Add the same bounds checks to the mask helpers, and reject disabled SST-PP levels in isst_if_get_perf_level_mask() to match isst_if_get_perf_level_info(). This prevents out-of-bounds reads from the

platform/x86: ISST: Validate socket ID in clos_assoc ioctl

In the Linux kernel, the following vulnerability has been resolved: platform/x86: ISST: Validate socket ID in clos_assoc ioctl isst_if_clos_assoc() validates the user-supplied socket_id with 'socket_id > topology_max_packages()', but isst_common.sst_inst[] is allocated with topology_max_packages() entries, so the valid index range is [0, topology_max_packages()). The '>' comparison lets socket_id == topology_max_packages() pass and index one entry past the array. In addition, isst_common.sst_inst[socket_id] is NULL for an in-range package that has no bound TPMI SST instance, and the pointer is used without a NULL check. Both the out-of-b

mmc: via-sdmmc: cancel card-detect work on remove

In the Linux kernel, the following vulnerability has been resolved: mmc: via-sdmmc: cancel card-detect work on remove Disabling the device interrupt and freeing the IRQ prevents new card-detect work from being queued, but carddet_work already queued by the handler can still run after via_sd_remove() returns. via_sdc_card_detect() recovers the host through container_of() and dereferences its MMIO base; once remove() returns the host can be freed, so that work would touch freed memory. Cancel carddet_work after freeing the IRQ and before cancelling finish_bh_work, which the card-detect handler can also queue. carddet_work can re-enable the i