Уязвимости linux-lowlatency · Страница 119

i2c: imx: Fix slave registration race and error handling

In the Linux kernel, the following vulnerability has been resolved: i2c: imx: Fix slave registration race and error handling In i2c_imx_reg_slave(), the slave pointer was assigned before pm_runtime_resume_and_get(). If pm_runtime_resume_and_get() failed, the error path returned without clearing i2c_imx->slave, leaving it non-NULL and causing all subsequent registration attempts to fail with -EBUSY. Additionally, because this driver uses a shared IRQ, the interrupt handler i2c_imx_isr() can execute concurrently and, after acquiring slave_lock, dereference i2c_imx->slave. The previous fix attempt added a lockless i2c_imx->slave = NULL on t

driver core: use READ_ONCE() for dev->driver in dev_has_sync_state()

In the Linux kernel, the following vulnerability has been resolved: driver core: use READ_ONCE() for dev->driver in dev_has_sync_state() dev_has_sync_state() reads dev->driver twice without holding device_lock() -- once for the NULL check and once to dereference ->sync_state. Some callers only hold device_links_write_lock, which doesn't prevent a concurrent unbind from clearing dev->driver via device_unbind_cleanup(). Fix it by reading dev->driver exactly once with READ_ONCE(), pairing with the WRITE_ONCE() in device_set_driver().

• Обновитесь до 6.8.0-147.147.1

Drivers: hv: vmbus: use generic driver_override infrastructure

In the Linux kernel, the following vulnerability has been resolved: Drivers: hv: vmbus: use generic driver_override infrastructure When a driver is probed through __driver_attach(), the bus' match() callback is called without the device lock held, thus accessing the driver_override field without a lock, which can cause a UAF. Fix this by using the driver-core driver_override infrastructure taking care of proper locking internally. Note that calling match() from __driver_attach() without the device lock held is intentional. [1]

• Обновитесь до 6.8.0-147.147.1

perf sched: Fix register_pid() overflow, strcpy, and BUG_ON

In the Linux kernel, the following vulnerability has been resolved: perf sched: Fix register_pid() overflow, strcpy, and BUG_ON register_pid() has several issues when processing untrusted perf.data: 1. Integer overflow: (pid + 1) * sizeof(struct task_desc *) can wrap to a small value on 32-bit systems when pid is large (e.g. 0x40000000), causing realloc to return a tiny buffer followed by out-of-bounds writes in the initialization loop. 2. Heap buffer overflow: strcpy(task->comm, comm) copies the untrusted comm string into a fixed 20-byte COMM_LEN buffer with no length check. 3. BUG_ON on allocation failure: perf.data is u

perf tools: Use perf_env__get_cpu_topology() in machine__resolve()

In the Linux kernel, the following vulnerability has been resolved: perf tools: Use perf_env__get_cpu_topology() in machine__resolve() machine__resolve() accesses env->cpu[al->cpu].socket_id after checking al->cpu >= 0 and env->cpu != NULL, but without validating al->cpu against env->nr_cpus_avail. Since al->cpu comes from the untrusted perf.data sample, a crafted file with a large CPU index causes an out-of-bounds heap read. Use perf_env__get_cpu_topology() which validates both NULL and bounds. Also bounds-check al->cpu before the cast to struct perf_cpu (int16_t): without this, values like 65536 silently truncate to 0, bypassing the acc

bpf: Disable xfrm_decode_session hook attachment

In the Linux kernel, the following vulnerability has been resolved: bpf: Disable xfrm_decode_session hook attachment BPF LSM programs can currently attach to xfrm_decode_session(). That hook may return an error, but security_skb_classify_flow() calls it from a void path and triggers BUG_ON() if an error is returned. Disable BPF attachment to the hook to prevent a BPF LSM program from turning packet classification into a full panic.

• Обновитесь до 6.8.0-147.147.1

net/mlx5: LAG, MPESW, Fix missing complete() on devcom error

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: LAG, MPESW, Fix missing complete() on devcom error mlx5_mpesw_work() returned without calling complete() when mlx5_lag_get_devcom_comp() returned NULL. A caller that queued the work and waited on mpesww->comp would block indefinitely. Funnel the early-return path through a new "complete" label so the waiter is always woken.

• Обновитесь до 6.8.0-147.147.1

netfilter: xt_nat: reject unsupported target families

In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_nat: reject unsupported target families xt_nat SNAT and DNAT target handlers assume IP-family conntrack state is present and can dereference a NULL pointer when instantiated from an unsupported family through nft_compat. A bridge-family compat rule can therefore trigger a NULL-dereference in nf_nat_setup_info(). Reject non-IP families in xt_nat_checkentry() so unsupported targets cannot be installed. Keep NFPROTO_INET allowed for valid inet NAT compat users and leave the runtime fast path unchanged. [ The crash was fixed via 9dbba7e694ec ("netfilter: nft_c

• Обновитесь до 6.8.0-147.147.1

tools/power/x86/intel-speed-select: Harden daemon pidfile open

In the Linux kernel, the following vulnerability has been resolved: tools/power/x86/intel-speed-select: Harden daemon pidfile open Avoid symlink-based pidfile clobbering by opening the pidfile with O_NOFOLLOW and validating it with fstat() before locking/writing. The daemon currently uses a fixed pidfile path under /tmp. A local unprivileged user can pre-create a symlink at that path and cause a root-run daemon instance to write into an attacker-chosen file.

• Обновитесь до 6.8.0-147.147.1

cxl: Fix CXL_HEADERLOG_SIZE to match RAS Capability size

In the Linux kernel, the following vulnerability has been resolved: cxl: Fix CXL_HEADERLOG_SIZE to match RAS Capability size The CXL r4.0 8.2.4.17.7 RAS Capability Structure has total length 0x58 bytes (CXL_RAS_CAPABILITY_LENGTH); the Header Log occupies the trailing 64 bytes at offset 0x18. CXL_HEADERLOG_SIZE was defined as SZ_512, eight times the actual on-device size. header_log_copy() reads CXL_HEADERLOG_SIZE_U32 (128) dwords from the RAS capability iomap, overrunning the 88-byte mapping by 448 bytes. The cxl_aer_uncorrectable_error trace event memcpy()s CXL_HEADERLOG_SIZE (512) bytes from its source. For the CPER caller the source i

hwmon: (occ) unregister sysfs devices outside occ lock

In the Linux kernel, the following vulnerability has been resolved: hwmon: (occ) unregister sysfs devices outside occ lock occ_active(false) and occ_shutdown() unregister sysfs-backed devices while occ->lock is held. hwmon_device_unregister() and sysfs_remove_group() can wait for active sysfs callbacks to drain, and those callbacks can enter the OCC update path and try to take occ->lock again. That gives the unregister paths the lock ordering occ->lock -> sysfs callback drain, while a callback has the opposite edge sysfs callback -> occ->lock. This issue was found by our static analysis tool and then manually reviewed against the current

• Обновитесь до 6.8.0-147.147.1

mmc: vub300: defer reset until cmd_mutex is unlocked

In the Linux kernel, the following vulnerability has been resolved: mmc: vub300: defer reset until cmd_mutex is unlocked vub300_cmndwork_thread() holds cmd_mutex while it sends a command and waits for the command response. If the response wait times out, __vub300_command_response() kills the command URBs and then synchronously resets the USB device through usb_reset_device(). That reset path re-enters the driver through vub300_pre_reset(), which also takes cmd_mutex. The worker therefore tries to acquire the same mutex recursively while it is still holding it from the command path. This issue was found by our static analysis tool and th

• Обновитесь до 6.8.0-147.147.1

soc: xilinx: Shutdown and free rx mailbox channel

In the Linux kernel, the following vulnerability has been resolved: soc: xilinx: Shutdown and free rx mailbox channel A mbox rx channel is requested using mbox_request_channel_byname() in probe. In remove callback, the rx mailbox channel is cleaned up when the rx_chan is NULL due to incorrect condition check. The mailbox channel is not shutdown and it can receive messages even after the device removal. This leads to use after free. Also the channel resources are not freed. Fix this by checking the rx_chan correctly.

• Обновитесь до 6.8.0-147.147.1

scsi: hisi_sas: Add slave_destroy interface for v3 hw

In the Linux kernel, the following vulnerability has been resolved: scsi: hisi_sas: Add slave_destroy interface for v3 hw WARNING is triggered when executing link reset of remote PHY and rmmod SAS driver simultaneously. Following is the WARNING log: WARNING: CPU: 61 PID: 21818 at drivers/base/core.c:1347 __device_links_no_driver+0xb4/0xc0 Call trace: __device_links_no_driver+0xb4/0xc0 device_links_driver_cleanup+0xb0/0xfc __device_release_driver+0x198/0x23c device_release_driver+0x38/0x50 bus_remove_device+0x130/0x140 device_del+0x184/0x434 __scsi_remove_device+0x118/0x150 scsi_remove_target+0x1bc/0x240 sas_rphy_remove+0

crypto: ccp - Treat zero-length cert chain as query for blob lengths

In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Treat zero-length cert chain as query for blob lengths When handling a PDH export, treat a zero-length userspace cert chain buffer as a request to query the length of the relevant blobs. Failure to account for the zero-length buffer trips a BUG_ON() when running with CONFIG_DEBUG_VIRTUAL=y due to trying to get the physical address of the ZERO_SIZE_PTR (returned by kzalloc() on the bogus allocation). kernel BUG at arch/x86/mm/physaddr.c:28 ! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI CPU: 30 UID: 0 PID: 28580 Comm: syz.2.18 Kdump: loaded Tainted

• Обновитесь до 6.8.0-147.147.1

media: atomisp: gc2235: fix UAF and memory leak

In the Linux kernel, the following vulnerability has been resolved: media: atomisp: gc2235: fix UAF and memory leak gc2235_probe() handles its error paths incorrectly. If media_entity_pads_init() fails, gc2235_remove() is called, which tears down the subdev and frees dev, but then still falls through to atomisp_register_i2c_module(). This results in use-after-free. If atomisp_register_i2c_module() fails, the media entity and control handler are left initialized and dev is leaked. gc2235_remove() unconditionally calls media_entity_cleanup() and v4l2_ctrl_handler_free(), but these are not initialized at every error path in gc2235_probe().

• Обновитесь до 6.8.0-147.147.1

firmware: arm_scmi: Fix OOB in scmi_power_name_get()

In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Fix OOB in scmi_power_name_get() scmi_power_name_get() does not validate the domain number passed by the external caller, which may lead to an out-of-bounds access. Fix this by returning "unknown" for invalid domains, like scmi_reset_name_get() does.

• Обновитесь до 6.8.0-147.147.1

RDMA/hns: Fix warning in poll cq direct mode

In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix warning in poll cq direct mode CQs allocated by ib_alloc_cq() always have a comp_handler. Though in direct mode this handler is never expected to be called, it is still called when the driver is reset, triggering the following WARN_ONCE(): Call trace: ib_cq_completion_direct+0x38/0x60 hns_roce_cq_completion+0x54/0x90 (hns_roce_hw_v2] hns_roce_handle_device_err+Ox1c8/0x340 [hns_roce_hw_v2] hns_roce_hw_v2_uninit_instance.constprop.0+0x34/0x70 [hns_roce_hw_v2] hns_roce_hw_v2_reset_notify+0xc4/0xe0 [hns_roce_hw_v2] hclge_notify_roce_client+0x60/0xbc [hclge] hclge

• Обновитесь до 6.8.0-147.147.1

ipv6: guard against possible NULL deref in __in6_dev_stats_get()

In the Linux kernel, the following vulnerability has been resolved: ipv6: guard against possible NULL deref in __in6_dev_stats_get() dev_get_by_index_rcu() could return NULL if the original physical device is unregistered. Found by Sashiko.

• Обновитесь до 6.8.0-147.147.1

rapidio/tsi721: prevent a bad dereference in tsi721_db_dpc()

In the Linux kernel, the following vulnerability has been resolved: rapidio/tsi721: prevent a bad dereference in tsi721_db_dpc() With a list_for_each() loop, if we don't find the item we are looking for in the list, then the loop exits with the iterator, which is "dbell" in this loop, pointing to invalid memory. This code uses the "found" variable to determine if we have found the doorbell we are looking for or not. However, the problem that the "found" variable needs to be set to false at the start of each iteration, otherwise after the first correct doorbell, then everything is marked as found. Reset the "found" to false at the start o

• Обновитесь до 6.8.0-147.147.1