Без оценкиEPSS 0,21%Нет опубликованного исправления
ALSA: FCP: do not copy out an uninitialised init response
In the Linux kernel, the following vulnerability has been resolved:
ALSA: FCP: do not copy out an uninitialised init response
fcp_ioctl_init() allocates its response buffer with kmalloc() and copies
the whole buffer back to userspace:
buf_size = init.step0_resp_size + init.step2_resp_size;
void *resp __free(kfree) =
kmalloc(buf_size, GFP_KERNEL);
...
if (copy_to_user(arg->resp, resp, buf_size))
return -EFAULT;
Nothing clears the buffer, and the only writer of its leading
step0_resp_size bytes is the step-0 control transfer:
err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0),
FCP_USB_REQ_STEP0,
USB_RECIP_INTERFACE | USB_TYPE
Без оценкиEPSS 0,22%Нет опубликованного исправления
ALSA: mpu401: Check card index validity at probe
In the Linux kernel, the following vulnerability has been resolved:
ALSA: mpu401: Check card index validity at probe
mpu401 driver blindly trusts that the given devptr->id value is within
the proper card index range at probe. It's OK for the devices the
driver itself creates at the module probe time, but if the device is
bound manually via sysfs interface, this could be -1 as "none", and
this leads to OOB access for index[] and other parameters.
Add a sanity check for the card index and warn/correct it if it's a
value out of the range.
Без оценкиEPSS 0,22%Нет опубликованного исправления
ALSA: mts64: Check card index validity at probe
In the Linux kernel, the following vulnerability has been resolved:
ALSA: mts64: Check card index validity at probe
Although mts64 driver has a check of the given devptr->id value, it
doesn't check for a negative id, which is often given as "none" or
such value when bound via sysfs. This may lead to OOB access for
index[] and other parameters.
Add a sanity check for the card index and warn/correct it if it's a
value out of the range.
Высокий · CVSS 8.4EPSS 0,18%Нет опубликованного исправления
ALSA: pcxhr: initialize mutexes before requesting threaded IRQ
In the Linux kernel, the following vulnerability has been resolved:
ALSA: pcxhr: initialize mutexes before requesting threaded IRQ
pcxhr_probe() requests pcxhr_threaded_irq() before initializing
mgr->lock, even though the threaded handler takes that mutex.
Initialize the manager locks before request_threaded_irq() so an
early interrupt cannot run against uninitialized mutex state during
probe.
Без оценкиEPSS 0,22%Нет опубликованного исправления
ALSA: portman2x4: Check card index validity at probe
In the Linux kernel, the following vulnerability has been resolved:
ALSA: portman2x4: Check card index validity at probe
Although portman2x4 driver has a check of the given devptr->id value,
it doesn't check for a negative id, which is often given as "none" or
such value when bound via sysfs. This may lead to OOB access for
index[] and other parameters.
Add a sanity check for the card index and warn/correct it if it's a
value out of the range.
Без оценкиEPSS 0,18%Нет опубликованного исправления
ALSA: serial-u16550: Check card index validity at probe
In the Linux kernel, the following vulnerability has been resolved:
ALSA: serial-u16550: Check card index validity at probe
serial-u16550 driver blindly trusts that the given devptr->id value is
within the proper card index range at probe. It's OK for the devices
the driver itself creates at the module probe time, but if the device
is bound manually via sysfs interface, this could be -1 as "none", and
this leads to OOB access for index[] and other parameters.
Add a sanity check for the card index and warn/correct it if it's a
value out of the range.
Без оценкиEPSS 0,17%Нет опубликованного исправления
ALSA: virmidi: Check card index validity at probe
In the Linux kernel, the following vulnerability has been resolved:
ALSA: virmidi: Check card index validity at probe
virmidi driver blindly trusts that the given devptr->id value is
within the proper card index range at probe. It's OK for the devices
the driver itself creates at the module probe time, but if the device
is bound manually via sysfs interface, this could be -1 as "none", and
this leads to OOB access for index[] and other parameters.
Add a sanity check for the card index and warn/correct it if it's a
value out of the range.
Без оценкиEPSS 0,18%Нет опубликованного исправления
dm-stats: fix a crash if allocation of per-cpu data fails
In the Linux kernel, the following vulnerability has been resolved:
dm-stats: fix a crash if allocation of per-cpu data fails
If "dm_kvzalloc(percpu_alloc_size, cpu_to_node(cpu))" fails, the code
jumps to the "out" label and calls dm_stat_free. dm_stat_free does
"for_each_possible_cpu(cpu) { dm_kvfree(s->stat_percpu[cpu][0].histogram,
s->histogram_alloc_size);", which crashes with NULL pointer dereference
if s->stat_percpu[cpu] is NULL.
This commit fixes the bug by testing s->stat_percpu[cpu] for NULL before
using it.
Высокий · CVSS 7.8EPSS 0,13%Нет опубликованного исправления
i3c: master: Fix info leak and UAF in device unregister path
In the Linux kernel, the following vulnerability has been resolved:
i3c: master: Fix info leak and UAF in device unregister path
i3c_master_unregister_i3c_devs() clears i3cdev->dev->desc before
calling device_unregister(). During device_unregister(),
device_del() emits a KOBJ_REMOVE uevent and unbinds the driver while
the device descriptor is still expected to be valid. As a result,
i3c_device_uevent() and a racing modalias_show() can observe a NULL
desc and fall back to an uninitialized stack struct i3c_device_info,
leaking kernel stack contents in the generated modalias. Driver
.remove() callbacks may also encounter an unexpected NULL
Без оценкиEPSS 0,21%Нет опубликованного исправления
i3c: master: svc: bound IBI payload to the requested max_payload_len
In the Linux kernel, the following vulnerability has been resolved:
i3c: master: svc: bound IBI payload to the requested max_payload_len
svc_i3c_master_handle_ibi() reads the IBI payload from the RX FIFO into
the IBI slot. The loop is bounded by the hardware FIFO size
(SVC_I3C_FIFO_SIZE), not by the slot size.
slot->data points into the IBI pool, which i3c_generic_ibi_alloc_pool()
sizes at max_payload_len per slot. svc_i3c_master_request_ibi() only
rejects a max_payload_len larger than SVC_I3C_FIFO_SIZE, so a driver can
request a smaller one. mctp-i3c requests 1. Each readsb() then copies the
controller RXCOUNT bytes (up to 31) with no che
Высокий · CVSS 7.8EPSS 0,17%Нет опубликованного исправления
i3c: renesas: Check that the transfer is valid before accessing it
In the Linux kernel, the following vulnerability has been resolved:
i3c: renesas: Check that the transfer is valid before accessing it
The Renesas I3C driver uses an asynchronous model to transfer data. It
prepares a struct renesas_i3c_xfer, enqueues it, and waits for completion.
The interrupt handler dequeues the transfer, updates/uses it, and signals
the waiting thread.
If the completion times out, the waiting thread dequeues the transfer and
free it. If an interrupt fires after that, the handler may access freed
memory, leading to crashes.
Check that the transfer is still valid before accessing it in the
interrupt handler. With it clea
Без оценкиEPSS 0,18%Нет опубликованного исправления
wifi: brcmfmac: Fix memory leak in brcmf_sdio_read_control()
In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: Fix memory leak in brcmf_sdio_read_control()
The memory allocated for buf is not freed in some of the error paths in
brcmf_sdio_read_control(). Fix that by adding vfree() calls.
[arend: rework as suggested by Johannes]
Без оценкиEPSS 0,22%Нет опубликованного исправления
wifi: iwlwifi: dvm: fix memory leak in iwl_op_mode_dvm_start()
In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: dvm: fix memory leak in iwl_op_mode_dvm_start()
In iwl_op_mode_dvm_start(), jumping to out_free_eeprom currently bypasses
the out_free_eeprom_blob label. Consequently, error paths triggered after
successfully parsing the EEPROM free priv->nvm_data but leak
priv->eeprom_blob.
Fix this memory leak by reordering the error handling labels so
that out_free_eeprom falls through to out_free_eeprom_blob.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under d
Высокий · CVSS 7.8EPSS 0,16%Нет опубликованного исправления
wifi: rtl8xxxu: fix use-after-free from rx_urb_wq on stop
In the Linux kernel, the following vulnerability has been resolved:
wifi: rtl8xxxu: fix use-after-free from rx_urb_wq on stop
rtl8xxxu arms rx_urb_wq from the RX completion path:
rtl8xxxu_rx_complete() hands the URB to rtl8xxxu_queue_rx_urb(), which
queues it on rx_urb_pending_list and, once the list grows past
RTL8XXXU_RX_URB_PENDING_WATER, schedules rx_urb_wq. The worker
rtl8xxxu_rx_urb_work() drains rx_urb_pending_list, recovers priv through
container_of, and resubmits each URB through rtl8xxxu_submit_rx_urb(),
which anchors it on rx_anchor and dereferences priv->udev.
rtl8xxxu_stop() cancels the sibling work items (c2hcmd_work, ra_wat
Без оценкиEPSS 0,17%Нет опубликованного исправления
fuse: copy request headers via a stack buffer for io-uring
In the Linux kernel, the following vulnerability has been resolved:
fuse: copy request headers via a stack buffer for io-uring
The fuse-io-uring transport copies req->in.h out to the ring in
fuse_uring_copy_to_ring() and req->out.h back in fuse_uring_commit().
Both headers live inside the fuse_request slab object, whose cache
(fuse_req_cachep) is created without a usercopy whitelist, so copying
them directly to/from userspace trips CONFIG_HARDENED_USERCOPY and
panics:
usercopy: Kernel memory exposure attempt detected from SLUB object
'fuse_request' (offset 56, size 40)!
kernel BUG at mm/usercopy.c:102!
Oops: invalid opcode: 0000 [#
crypto: iaa - unmap dst before software fallback on decompress
In the Linux kernel, the following vulnerability has been resolved:
crypto: iaa - unmap dst before software fallback on decompress
On a hardware analytics error, decompress retries through the software
fallback, which writes req->dst with the CPU while it is still mapped
DMA_FROM_DEVICE. With SWIOTLB active the later dma_unmap_sg() copies the
stale bounce buffer over req->dst, corrupting the result.
Unmap before the fallback runs. The async path unmaps inline; the sync
path signals the retry with -EAGAIN so iaa_comp_adecompress() runs the
fallback after unmapping.
Высокий · CVSS 7.8EPSS 0,13%Нет опубликованного исправления
wifi: mwifiex: Detach sync cmd buffer on interrupted wait
In the Linux kernel, the following vulnerability has been resolved:
wifi: mwifiex: Detach sync cmd buffer on interrupted wait
mwifiex synchronous commands keep the caller-provided data buffer in
cmd_node->data_buf. Several callers pass stack-allocated objects there.
If wait_event_interruptible_timeout() is interrupted, the caller can
return and release that stack object while the firmware command is still
the current command. A late firmware response then reaches the normal
response handler, which can copy data through cmd_node->data_buf into the
stale stack address.
This fixes a stack corruption observed during repeated association and
d
Высокий · CVSS 7.6EPSS 0,24%Нет опубликованного исправления
wifi: rtlwifi: rtl8192du: check QoS TID before indexing tids
In the Linux kernel, the following vulnerability has been resolved:
wifi: rtlwifi: rtl8192du: check QoS TID before indexing tids
rtl92du_tx_fill_desc() uses ieee80211_get_tid() to read the QoS TID
from the 802.11 header and then uses it as an index into
sta_entry->tids[]. ieee80211_get_tid() returns the low 4-bit QoS TID
value, so the result can be in the range 0..15.
rtlwifi only allocates MAX_TID_COUNT entries for sta_entry->tids[], and
MAX_TID_COUNT is 9. A QoS TID greater than 8 therefore indexes past the
aggregation state array. Keep the default RTL_AGG_STOP state for
out-of-range TIDs, matching rtl92cu_tx_fill_desc().
This issue was
Без оценкиEPSS 0,17%Нет опубликованного исправления
wifi: rtlwifi: rtl8192du: Fix possible memory leak in rtl92du_init_sw_vars()
In the Linux kernel, the following vulnerability has been resolved:
wifi: rtlwifi: rtl8192du: Fix possible memory leak in rtl92du_init_sw_vars()
The memory allocated inside rtl92du_init_shared_data() is not freed in
any of the subsequent error paths in rtl92du_init_sw_vars().
Fix that by adding a call to rtl92du_deinit_shared_data() in the error
path.
Без оценкиEPSS 0,22%Нет опубликованного исправления
wifi: rtw88: Fix potential memory leak in rtw_txq_push_skb()
In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: Fix potential memory leak in rtw_txq_push_skb()
The skb passed to the rtw_hci_tx_write() is expected to be freed when
the function fails, but the error path in rtw_txq_push_skb() does not
free the skb before returning. This can lead to a memory leak in
rtw_txq_push() where a dequeued skb is passed to rtw_txq_push_skb().