p PatchFirst

PatchFirst · Свежие уязвимости

Уязвимости linux-oem-6.17 · Страница 137

За последние 30 дней в linux-oem-6.17 опубликовано уязвимостей: 946; в каталоге KEV: 0.

RSS ↗ JSON ↗
Фильтры уязвимостей
Сбросить фильтры

Уязвимостей: 7860

  1. CVE-2026-80789

    Без оценкиEPSS 0,23%Нет опубликованного исправления

    nvmet-tcp: bound SGL data length before allocating command buffers

    In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: bound SGL data length before allocating command buffers nvmet_tcp_map_data() reads the host-controlled 32-bit sgl->length and, for the in-capsule offset descriptor (type 0x01), checks it against port->inline_data_size before use. Any other SGL descriptor type -- including the non-inline transport SGL data-block descriptor (type (NVME_TRANSPORT_SGL_DATA_DESC << 4) | NVME_SGL_FMT_TRANSPORT_A, the type a real host uses for out-of-capsule writes) skips that check entirely and falls straight through to: cmd->req.sg = sgl_alloc(len, GFP_KERNEL, &cmd->req.sg_cnt); wi

    linux-oem-6.17Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  2. CVE-2026-80788

    Без оценкиEPSS 0,19%Нет опубликованного исправления

    nvmet-tcp: Do not WARN on remotely-controlled oversized SGL allocations

    In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: Do not WARN on remotely-controlled oversized SGL allocations When fuzzing the nvme target code, I tripped a kernel warning in nvmet_tcp_map_data() because the length passed into the allocator is controlled by the remote initiator. A remote initiator that sends a command with an SGL claiming a huge number, can create a scatterlist and iovec allocation of over 1 million entries, which causes the backing kmalloc call to exceed MAX_PAGE_ORDER and then the page allocator will trip on a WARN_ON_ONCE_GFP() message: WARNING: mm/page_alloc.c:5280 __alloc_frozen_pages_

    linux-oem-6.17Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  3. CVE-2026-80787

    Без оценкиEPSS 0,21%Нет опубликованного исправления

    nvmet: pci-epf: fix use-after-free in nvmet_pci_epf_exec_iod_work()

    In the Linux kernel, the following vulnerability has been resolved: nvmet: pci-epf: fix use-after-free in nvmet_pci_epf_exec_iod_work() nvmet_pci_epf_exec_iod_work() submits an I/O command with req->execute() and then waits for the command to complete and transfers the data back to the host. This wait is not needed for commands that do not transfer data from the device to the host. To decide whether that wait is needed, it reads iod->data_len and iod->dma_dir after calling req->execute(). However, once req->execute() is called, the command may complete asynchronously on another CPU. For commands that do not require a device-to-host data tr

    linux-oem-6.17Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  4. CVE-2026-80786

    Без оценкиEPSS 0,21%Нет опубликованного исправления

    fbdev: Wrap user-invoked calls to fb_set_var() in helper

    In the Linux kernel, the following vulnerability has been resolved: fbdev: Wrap user-invoked calls to fb_set_var() in helper Handle fbcon during display updates in fb_set_var_from_user(). Check with fbcon if the mode change is possible, update hardware state and finally update fbcon. Update all callers. Only the FBIOPUT_VSCREENINFO ioctl currently does all steps. Other mode-changes callers in sysfs and driver code are missing fbcon-related steps. With the new helper, ps3fb and sh_mobile_lcdcfb no longer maintain fbcon state themselves.

    linux-oem-6.17Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  5. CVE-2026-80785

    Без оценкиEPSS 0,15%Нет опубликованного исправления

    fbdev: serialize mode sysfs access with lock_fb_info()

    In the Linux kernel, the following vulnerability has been resolved: fbdev: serialize mode sysfs access with lock_fb_info() show_mode(), show_modes(), and store_mode() access fb_info->modelist and fb_info->mode without holding lock_fb_info(). store_modes() takes lock_fb_info() while replacing the modelist and freeing the old one. A concurrent reader or writer can load a pointer to an old modelist entry before store_modes() frees it, then dereference freed memory or store a stale freed pointer in fb_info->mode. Take lock_fb_info() in show_mode(), show_modes(), and store_mode() to serialize with store_modes(). In show_mode(), copy the mode t

    linux-oem-6.17Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  6. CVE-2026-80784

    Без оценкиEPSS 0,17%Нет опубликованного исправления

    mptcp: pm: fix memory leak from alloc-during-teardown race

    In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: fix memory leak from alloc-during-teardown race mptcp_pm_destroy() empties msk->pm.anno_list and msk->pm.userspace_pm_local_addr_list under msk->pm.lock during socket teardown, dropping the lock between the two. A concurrent userspace PM genl ANNOUNCE on the same msk holds a sock reference via mptcp_token_get_sock() and, in mptcp_pm_nl_announce_doit(), calls mptcp_userspace_pm_append_new_local_addr() and mptcp_pm_announced_alloc(). Both take msk->pm.lock briefly to add to their respective lists. Because the genl handler holds a sock reference, mptcp_pm_destroy()

    linux-oem-6.17Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  7. CVE-2026-80783

    Без оценкиEPSS 0,19%Нет опубликованного исправления

    HID: magicmouse: prevent unbounded recursion in magicmouse_raw_event()

    In the Linux kernel, the following vulnerability has been resolved: HID: magicmouse: prevent unbounded recursion in magicmouse_raw_event() magicmouse_raw_event() handles DOUBLE_REPORT_ID (0xf7) packets, which pack two touch reports into one, by splitting the packet and calling itself on each half. The only guard against runaway recursion is a "size < 1" check, which stops zero-sized calls but does not bound the recursion depth. A malicious HID device that matches this driver can send a report starting with DOUBLE_REPORT_ID and filled with the sequence [0xf7, 0x00]. Each level consumes two bytes and recurses on the remainder, so an incoming

    linux-oem-6.17Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  8. CVE-2026-80782

    Без оценкиEPSS 0,19%Нет опубликованного исправления

    HID: magicmouse: do not keep a stale msc->input if no input is claimed

    In the Linux kernel, the following vulnerability has been resolved: HID: magicmouse: do not keep a stale msc->input if no input is claimed magicmouse_input_mapping() caches the first hid_input's input_dev in msc->input while the report descriptor is parsed, and the rest of the driver treats a non-NULL msc->input as proof that an input device was registered. That does not hold on the hid-input error path. If hidinput_connect() fails -- for instance because input_register_device() returns an error -- it unwinds through hidinput_disconnect(), which frees every input_dev it created, including the one cached in msc->input. The failure does not

    linux-oem-6.17Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  9. CVE-2026-80781

    Без оценкиEPSS 0,19%Нет опубликованного исправления

    HID: core: fix OOB read of field->usage in hid_set_field()

    In the Linux kernel, the following vulnerability has been resolved: HID: core: fix OOB read of field->usage in hid_set_field() hid_set_field() hands field->usage + offset to hid_dump_input() before the guard that bounds offset: hid_dump_input(field->report->device, field->usage + offset, value); if (offset >= field->report_count) { hid_err(...); return -1; } Under CONFIG_DEBUG_FS hid_dump_input() dereferences that pointer, with buf = hid_resolv_usage(usage->hid, NULL). The usage[] array is allocated inline with the hid_field in hid_register_field() and holds field->maxusage entries, so an offset past it reads off the end of the k

    linux-oem-6.17Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  10. CVE-2026-80780

    Без оценкиEPSS 0,18%Нет опубликованного исправления

    HID: pidff: fix OOB write when hid->inputs is empty

    In the Linux kernel, the following vulnerability has been resolved: HID: pidff: fix OOB write when hid->inputs is empty hid_pidff_init_with_quirks() derives its input_dev from list_entry(hid->inputs.next, struct hid_input, list) without first checking that hid->inputs is non-empty. The list member of struct hid_input is at offset 0, so on an empty list list_entry() yields &hid->inputs itself and the following hidinput->input load reads an unrelated member of struct hid_device. dev is then a type-confused pointer, and force-feedback init writes through it: each set_bit(FF_*, dev->ffbit) stores 8 bytes at dev + 192, past the end of the o

    linux-oem-6.17Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  11. CVE-2026-80779

    Без оценкиEPSS 0,17%Нет опубликованного исправления

    net/ionic: avoid OOB TX partner lookup for hwstamp RXQ

    In the Linux kernel, the following vulnerability has been resolved: net/ionic: avoid OOB TX partner lookup for hwstamp RXQ The dedicated hardware timestamp RX queue is allocated with q->index equal to lif->ionic->nrxqs_per_lif. The normal txqcqs array only contains the regular queue pairs, so using that index to set rxq->partner can read one entry past txqcqs[] and then write through the derived pointer. Only link RX/TX partners for normal queue-pair indexes. Leave the hwstamp RX queue unpaired, and make the XDP_TX path abort cleanly if an RX queue has no TX partner.

    linux-oem-6.17Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  12. CVE-2026-80778

    Без оценкиEPSS 0,17%Нет опубликованного исправления

    futex/pi: Reject cross-mm private futex owners

    In the Linux kernel, the following vulnerability has been resolved: futex/pi: Reject cross-mm private futex owners A private futex key borrows the waiter's mm without taking an mm_users reference. Nevertheless, attach_to_pi_owner() currently accepts an owner from a different address space and copies the private key into the owner's PI state. When that owner exits, exit_pi_state_list() uses the saved key to find the hash bucket and acquires a reference to the waiter's private hash. If the last user of the waiter's mm exits concurrently, futex_hash_free() frees the hash while the owner still uses its bucket and reference. Prevent this by va

    linux-oem-6.17Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  13. CVE-2026-80777

    Без оценкиEPSS 0,21%Нет опубликованного исправления

    futex/pi: Plug private futex exec() race

    In the Linux kernel, the following vulnerability has been resolved: futex/pi: Plug private futex exec() race The check for private futexes whether the waiter's mm, which is stored in the futex_key and copied into the pi_state, is the same as the owner's mm is not sufficient for exec(). exec() has a gap where the mm check fails to give the correct answer: exec() ... exec_release_mm() futex_exec_release() tsk::futex::exit_state = EXITING; cleanup_robust_list(); 1) tsk::futex::exit_state = OK; ... old_mm = tsk::mm; 2) tsk::mm = ->mm; Between #1 and #2 the check for the mm is wrong as that mm is abo

    linux-oem-6.17Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  14. CVE-2026-80776

    Без оценкиEPSS 0,17%Нет опубликованного исправления

    futex: Fix race in futex_pivot_pending() during private hash resize

    In the Linux kernel, the following vulnerability has been resolved: futex: Fix race in futex_pivot_pending() during private hash resize A task performing a custom private hash resize can remain blocked in uninterruptible sleep indefinitely. The hung-task detector reports: INFO: task futex-resizer:314 blocked for more than 10 seconds. task:futex-resizer state:D stack:14824 pid:314 tgid:312 ppid:311 Call Trace: __schedule+0x521/0xf30 schedule+0x22/0xa0 futex_hash_allocate+0x3db/0x490 __do_sys_prctl+0x6f5/0xbd0 do_syscall_64+0xf9/0x530 entry_SYSCALL_64_after_hwframe+0x77/0x7f Kernel panic - not syncing: hung_task:

    linux-oem-6.17Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  15. CVE-2026-80775

    Без оценкиEPSS 0,18%Публичный эксплойтНет опубликованного исправления

    futex: Fix race on the initial mm->futex.phash.ref allocation

    In the Linux kernel, the following vulnerability has been resolved: futex: Fix race on the initial mm->futex.phash.ref allocation futex_hash_allocate() allocates mm->futex.phash.ref without any locking. Commit d9b05321e21e ("futex: Move futex_hash_free() back to __mmput()") moved the allocation here and assumed that the process has just a single thread at this point. Commit ee9dce44362b ("futex: Drop CLONE_THREAD requirement for private default hash alloc") widened need_futex_hash_allocate_default() to cover any CLONE_VM clone, but left out vfork because the parent is suspended and cannot race. That no longer holds once vfork is nested. I

    linux-oem-6.17Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  16. CVE-2026-80774

    Без оценкиEPSS 0,17%Нет опубликованного исправления

    HID: asus: fix missing hid_is_usb() check

    In the Linux kernel, the following vulnerability has been resolved: HID: asus: fix missing hid_is_usb() check to_usb_interface() can only be used on a hid_device whose parent is really USB; uhid can create devices that identify as being on BUS_USB, but don't actually have a USB parent. Fix the use of to_usb_interface() without a hid_is_usb() check. I have verified that it is currently possible to trigger a kernel splat due to this bug in an ASAN build, and that this commit fixes the issue.

    linux-oem-6.17Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  17. CVE-2026-80772

    Без оценкиEPSS 0,21%Нет опубликованного исправления

    HID: nintendo: fix out-of-bounds read in joycon_ctlr_read_handler()

    In the Linux kernel, the following vulnerability has been resolved: HID: nintendo: fix out-of-bounds read in joycon_ctlr_read_handler() joycon_ctlr_read_handler() casts an incoming HID input report to struct joycon_input_report and parses it, guarding the cast only with a 12-byte length check: if (size >= 12) /* make sure it contains the input report */ joycon_parse_report(ctlr, (struct joycon_input_report *)data); struct joycon_input_report is 49 bytes: a 13-byte header followed by a union whose IMU arm is 36 bytes. For an IMU report joycon_parse_report() -> joycon_parse_imu_report() walks that union (struct offsets 13..48), so a repo

    linux-oem-6.17Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  18. CVE-2026-80771

    Без оценкиEPSS 0,21%Нет опубликованного исправления

    HID: nintendo: register input device after capabilities are set

    In the Linux kernel, the following vulnerability has been resolved: HID: nintendo: register input device after capabilities are set input_register_device() exposes the device to userspace immediately. In joycon_input_create() it was called before joycon_config_rumble() configures the FF_RUMBLE capability and the memless force-feedback device, so a concurrent EVIOCSFF could dereference a NULL dev->ff. Registering early also means the initial udev event lacks button and axis information, which can make input managers ignore the device. Move input_register_device() to the end of joycon_input_create(), after all capabilities, the IMU input de

    linux-oem-6.17Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  19. CVE-2026-80770

    Без оценкиEPSS 0,21%Нет опубликованного исправления

    HID: nintendo: stop device IO before hid_hw_stop on probe failure

    In the Linux kernel, the following vulnerability has been resolved: HID: nintendo: stop device IO before hid_hw_stop on probe failure nintendo_hid_probe() calls hid_device_io_start() before joycon_init() and joycon_leds_create(). If either fails, the error path jumps to err_close which calls hid_hw_close()/hid_hw_stop() without first calling hid_device_io_stop(). hid_hw_stop() does not stop device IO, so hid_input_report() may still run and access driver data that is being torn down, resulting in a use-after-free. Add an err_io_stop label that calls hid_device_io_stop() before hid_hw_close(), and point the two post-io_start error paths a

    linux-oem-6.17Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  20. CVE-2026-80768

    Без оценкиEPSS 0,18%Нет опубликованного исправления

    HID: ft260: fix stack-use-after-return write in I2C read race

    In the Linux kernel, the following vulnerability has been resolved: HID: ft260: fix stack-use-after-return write in I2C read race ft260_i2c_read() points dev->read_buf at a caller-supplied buffer (often an on-stack variable), arms a completion and waits up to five seconds for the device to return the data. The HID input callback ft260_raw_event() runs in the input/IRQ path, independent of the dev->lock mutex held by the read path, and copies the device-supplied payload into dev->read_buf after a plain NULL check. These two paths share read_buf, read_idx and read_len with no serialization. If the device delays its response until the read ti

    linux-oem-6.17Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

Проверьте свой сервер

Сопоставьте установленный стек и версии со свежими базами уязвимостей.

Проверьте свой сервер →