p PatchFirst

PatchFirst · Свежие уязвимости

Уязвимости linux-oem-6.17 · Страница 172

За последние 30 дней в linux-oem-6.17 опубликовано уязвимостей: 763; в каталоге KEV: 0.

RSS ↗ JSON ↗
Фильтры уязвимостей
Сбросить фильтры

Уязвимостей: 7859

  1. CVE-2026-72469

    Высокий · CVSS 8.8EPSS 0,4%Нет опубликованного исправления

    xprtrdma: Fix ep kref imbalance on ADDR_CHANGE

    In the Linux kernel, the following vulnerability has been resolved: xprtrdma: Fix ep kref imbalance on ADDR_CHANGE rpcrdma_cm_event_handler() falls through to the disconnected: label on RDMA_CM_EVENT_ADDR_CHANGE and calls rpcrdma_ep_put() with no matching get when the event arrives before RDMA_CM_EVENT_ESTABLISHED. The kref then underflows during connect teardown and rpcrdma_xprt_disconnect() operates on a freed ep. Reference counts across a normal connection lifecycle: rpcrdma_ep_create() kref_init ->1 rpcrdma_xprt_connect() ep_get ->2 (before post_recvs) RDMA_CM_EVENT_ESTABLISHED ep_get

    linux-oem-6.17Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  2. CVE-2026-72468

    Без оценкиEPSS 0,21%Нет опубликованного исправления

    xprtrdma: Initialize re_id before removal registration

    In the Linux kernel, the following vulnerability has been resolved: xprtrdma: Initialize re_id before removal registration rpcrdma_create_id() registers ep->re_rn with the rpcrdma ib_client before returning the new rdma_cm_id to rpcrdma_ep_create(). However rpcrdma_ep_create() currently stores that pointer in ep->re_id only after rpcrdma_create_id() returns. A local administrator can race an NFS/RDMA mount against RDMA device removal. If rpcrdma_remove_one() observes the just-registered notification before rpcrdma_ep_create() assigns ep->re_id, rpcrdma_ep_removal_done() calls trace_xprtrdma_device_removal(NULL). The tracepoint dereferences

    linux-oem-6.17Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  3. CVE-2026-72467

    Без оценкиEPSS 0,21%Нет опубликованного исправления

    xprtrdma: Check frwr_wp_create() during connect

    In the Linux kernel, the following vulnerability has been resolved: xprtrdma: Check frwr_wp_create() during connect frwr_wp_create() creates the singleton Memory Region used to encode padding for Write chunks whose payload length is not XDR-aligned. Its failure paths return a negative errno and leave ep->re_write_pad_mr set to NULL. rpcrdma_xprt_connect() currently ignores that return value. If frwr_wp_create() fails after the rest of the connection setup succeeds, xprt_rdma_connect_worker() treats the connection attempt as successful and sets XPRT_CONNECTED. A later NFS/RDMA read with a non-4-byte-aligned receive page length reaches rpcrd

    linux-oem-6.17Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  4. CVE-2026-72466

    Критический · CVSS 9.8EPSS 0,74%Нет опубликованного исправления

    xprtrdma: Fix bcall rep leak and unbounded peek

    In the Linux kernel, the following vulnerability has been resolved: xprtrdma: Fix bcall rep leak and unbounded peek rpcrdma_is_bcall() decodes a reply's first words to decide whether the frame is a backchannel call. Two issues in that decode path let a short or malformed reply leak the receive buffer and drain the Receive queue. First, the speculative peek p = xdr_inline_decode(xdr, 0); /* five p++ reads follow */ asks xdr_inline_decode() for zero bytes, which returns xdr->p without consulting xdr->end. The five subsequent __be32 reads can then walk up to 20 bytes past the wire payload into stale regbuf contents and misclassify t

    linux-oem-6.17Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  5. CVE-2026-72464

    Высокий · CVSS 7.5EPSS 0,68%Нет опубликованного исправления

    xprtrdma: Repost Receive buffers for malformed replies

    In the Linux kernel, the following vulnerability has been resolved: xprtrdma: Repost Receive buffers for malformed replies rpcrdma_wc_receive() decrements the transport's Receive count for every completion before it dispatches a successful Receive to rpcrdma_reply_handler(). The handler must post a replacement Receive WR before returning unless ownership of the rep has moved elsewhere, as on the backchannel path. Commit 2ae50ad68cd7 ("xprtrdma: Close window between waking RPC senders and posting Receives") moved the Receive refill out of rpcrdma_wc_receive(), where it had run ahead of every reply, into rpcrdma_reply_handler() so that the r

    linux-oem-6.17Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  6. CVE-2026-72462

    Высокий · CVSS 8.8EPSS 0,17%Нет опубликованного исправления

    apparmor: fix race in unix socket mediation when peer_path is used

    In the Linux kernel, the following vulnerability has been resolved: apparmor: fix race in unix socket mediation when peer_path is used The holding a reference to the peer_sk is not enough to ensure access to the peer sk path. Accessing the path outside of the state lock allows for a race with unix_release_sock(). Fix this by taking the state lock and getting a reference to the path under lock. Ideally for connected sockets we would cache this information so we don't have to take the lock here. But for now just fix the race.

    linux-oem-6.17Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  7. CVE-2026-72461

    Высокий · CVSS 7.8EPSS 0,17%Нет опубликованного исправления

    apparmor: fix refcount leak when updating the sk_ctx

    In the Linux kernel, the following vulnerability has been resolved: apparmor: fix refcount leak when updating the sk_ctx Currently update_sk_ctx() transfers the plabel reference, unfortunately it is also unconditionally put in the caller. Ideally we would make the caller conditionally put the reference based on whether it was transferred but for now just fix the bug by getting a reference.

    linux-oem-6.17Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  8. CVE-2026-72460

    Высокий · CVSS 7.1EPSS 0,13%Нет опубликованного исправления

    apparmor: check label build before no_new_privs test

    In the Linux kernel, the following vulnerability has been resolved: apparmor: check label build before no_new_privs test aa_change_profile() builds a replacement label with fn_label_build_in_scope() before the no_new_privs subset check. The build helper can fail and return NULL or an ERR_PTR, but the result was passed to aa_label_is_unconfined_subset() before the existing IS_ERR_OR_NULL() check. Reuse the existing target-label build failure handling immediately after the build. This preserves the current audit handling while preventing the subset helper from dereferencing an invalid label.

    linux-oem-6.17Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  9. CVE-2026-72459

    Высокий · CVSS 7.8EPSS 0,14%Нет опубликованного исправления

    apparmor: aa_label_alloc use aa_label_free on alloc failure

    In the Linux kernel, the following vulnerability has been resolved: apparmor: aa_label_alloc use aa_label_free on alloc failure aa_label_alloc() allocates a secid before allocating or taking the label proxy. If the later proxy step fails, the error path only freed the label memory, leaking any resources initialized by aa_label_init(). Use aa_label_free() on the failure path so partially initialized labels release their secid and other label resources before the backing memory is freed.

    linux-oem-6.17Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  10. CVE-2026-72458

    Без оценкиEPSS 0,21%Нет опубликованного исправления

    apparmor: fix NULL pointer dereference in unpack_pdb

    In the Linux kernel, the following vulnerability has been resolved: apparmor: fix NULL pointer dereference in unpack_pdb pdb->dfa could be NULL if unpack_dfa fails, causing a NULL pointer dereference.

    linux-oem-6.17Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  11. CVE-2026-72457

    Без оценкиEPSS 0,21%Нет опубликованного исправления

    apparmor: fail policy unpack on accept2 allocation failure

    In the Linux kernel, the following vulnerability has been resolved: apparmor: fail policy unpack on accept2 allocation failure unpack_pdb() may need to allocate a missing ACCEPT2 table for older policy data. If that allocation failed, it set an error message but jumped to the success path, returning a policydb with the required table missing. Return -ENOMEM through the normal failure path when the ACCEPT2 allocation fails. Remove the now-unused out label.

    linux-oem-6.17Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  12. CVE-2026-72454

    Высокий · CVSS 7.8EPSS 0,17%Нет опубликованного исправления

    i3c: mipi-i3c-hci: Fix race in i3c_hci_addr_to_dev()

    In the Linux kernel, the following vulnerability has been resolved: i3c: mipi-i3c-hci: Fix race in i3c_hci_addr_to_dev() i3c_hci_addr_to_dev() walks bus->devs.i3c, which is protected by bus.lock (rwsem). However, it is invoked from the MIPI I3C HCI IRQ handler, which cannot take bus.lock. This allows concurrent device addition/removal in the I3C core to modify the list while it is being traversed, potentially leading to use-after-free or crashes. Remove the dependency on the bus device list and introduce a dedicated lookup table. Add an ibi_devs[] array indexed by DAT entry, maintained under hci->lock. Update the array when IBIs are en

    linux-oem-6.17Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  13. CVE-2026-72451

    Критический · CVSS 9.8EPSS 0,67%Нет опубликованного исправления

    xfrm: Fix xfrm state cache insertion race

    In the Linux kernel, the following vulnerability has been resolved: xfrm: Fix xfrm state cache insertion race The xfrm input state cache insertion code checks the validity of the state before acquiring the global xfrm_state_lock. Thus it's possible for someone else to kill the state after it passed the validity check, and then the insertion will add the dead state to the cache. Fix this by moving the validity check inside the lock. This entire function is called on the input path, where BH must be off (e.g., the caller of this function xfrm_input acquires its spinlocks without disabling BH). So there is no need to disable BH here or tak

    linux-oem-6.17Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  14. CVE-2026-72450

    Высокий · CVSS 7.8EPSS 0,17%Нет опубликованного исправления

    xfrm: validate selector family and prefixlen during match

    In the Linux kernel, the following vulnerability has been resolved: xfrm: validate selector family and prefixlen during match syzbot reported a shift-out-of-bounds in xfrm_selector_match() due to AF_UNSPEC selector with large prefixlen (e.g. 128) matched against IPv4 flow (when XFRM_STATE_AF_UNSPEC is set). Fix this by: - Rejecting mismatched families in xfrm_selector_match. - Returning false in addr4_match if prefixlen > 32. - Returning false in addr_match if prefixlen > 128 (prevents overflow).

    linux-oem-6.17Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  15. CVE-2026-72449

    Высокий · CVSS 7.8EPSS 0,17%Нет опубликованного исправления

    drm/amdkfd: fix list_del corruption in kfd_criu_resume_svm

    In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix list_del corruption in kfd_criu_resume_svm The cleanup tail of kfd_criu_resume_svm() walks svms->criu_svm_metadata_list and kfree()s each struct criu_svm_metadata without removing it from the list. The list head is left pointing at freed kmalloc-96 objects. A second AMDKFD_IOC_CRIU_OP from the same process re-enters: list_empty() reads the dangling ->next (use-after-free), the loop walks freed entries, and each is kfree()'d again (double-free). This is reachable by an unprivileged render-group user via /dev/kfd with no capabilities required. Add list_del()

    linux-oem-6.17Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  16. CVE-2026-72448

    Без оценкиEPSS 0,18%Нет опубликованного исправления

    octeontx2-pf: Fix leak of SQ timestamp buffer on teardown

    In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: Fix leak of SQ timestamp buffer on teardown The send-queue timestamp ring is allocated with qmem_alloc() when timestamping is used, but otx2_free_sq_res() never freed sq->timestamps, leaking that memory across ifdown and device removal. Add the missing qmem_free() alongside the other SQ companion buffers.

    linux-oem-6.17Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  17. CVE-2026-72447

    Без оценкиEPSS 0,22%Нет опубликованного исправления

    sctp: hold socket lock when dumping endpoints in sctp_diag

    In the Linux kernel, the following vulnerability has been resolved: sctp: hold socket lock when dumping endpoints in sctp_diag SCTP_DIAG endpoint dumping was traversing endpoint address lists without holding lock_sock(), while those lists could change concurrently via socket operations (e.g., bindx changes). This creates a race where nla_reserve() counts addresses under RCU protection, but the subsequent copy may see fewer entries, potentially leaking uninitialized memory to userspace. Fix this by: - Taking a reference on each endpoint during hash traversal - Moving socket operations (lock_sock()) outside read_lock_bh() - Serializing addr

    linux-oem-6.17Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  18. CVE-2026-72446

    Высокий · CVSS 7.8EPSS 0,17%Нет опубликованного исправления

    ALSA: usb-audio: qcom: reject stream disable with no active interface

    In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: qcom: reject stream disable with no active interface handle_uaudio_stream_req() resolves an interface index with info_idx_from_ifnum(), which returns -EINVAL when no interface matches. The enable branch and the response: cleanup label both guard against a negative index, but the disable branch does not: it forms info = &uadev[pcm_card_num].info[info_idx] and dereferences it. uadev[].info is a pointer allocated only when a stream is first enabled, so a negative info_idx on the disable path is unsafe in two ways: - If the card was never enabled, .info is N

    linux-oem-6.17Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  19. CVE-2026-72445

    Без оценкиEPSS 0,21%Нет опубликованного исправления

    ALSA: usb-audio: qcom: clear opened when stream enable fails

    In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: qcom: clear opened when stream enable fails On enable, subs->opened is set before the service_interval is validated; an invalid interval jumps to the response label without clearing it, so the substream is wedged at -EBUSY until a disable or disconnect. Clear subs->opened on the enable error path.

    linux-oem-6.17Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  20. CVE-2026-72444

    Высокий · CVSS 7.8EPSS 0,13%Нет опубликованного исправления

    flow_dissector: check device type before reading ETH_ADDRS

    In the Linux kernel, the following vulnerability has been resolved: flow_dissector: check device type before reading ETH_ADDRS __skb_flow_dissect() unconditionally reads 12 bytes from eth_hdr(skb) when FLOW_DISSECTOR_KEY_ETH_ADDRS is requested. This assumes the skb has a valid Ethernet header at mac_header, which is not always the case. The problem can be triggered by: 1. Creating a TUN device in L3 mode (IFF_TUN, hard_header_len=0) 2. Attaching a multiq qdisc with a flower filter matching on eth_src 3. Sending a packet through AF_PACKET Since TUN in L3 mode has no link-layer header, mac_header points to the L3 data area. The flow diss

    linux-oem-6.17Операционные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

Проверьте свой сервер

Сопоставьте установленный стек и версии со свежими базами уязвимостей.

Проверьте свой сервер →