drm/amdkfd: Avoid double-unpin of DOORBELL/MMIO BOs on free
In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Avoid double-unpin of DOORBELL/MMIO BOs on free
amdgpu_amdkfd_gpuvm_free_memory_of_gpu() unpinned DOORBELL and MMIO
remap BOs (which are pinned at allocation time) before checking whether
the BO is still mapped to the GPU. When the BO is still mapped, the
function returns -EBUSY and leaves the BO alive, but it has already
been unpinned. The BO is then unpinned again when it is finally freed
during process teardown, triggering a ttm_bo_unpin() underflow warning:
WARNING: CPU: 18 PID: 15066 at ttm/ttm_bo.c:650 amdttm_bo_unpin+0x6d/0x80 [amdttm]
Workqueue: kfd
ieee802154: Avoid calling WARN_ON() on -ENOMEM in cfg802154_switch_netns()
In the Linux kernel, the following vulnerability has been resolved:
ieee802154: Avoid calling WARN_ON() on -ENOMEM in cfg802154_switch_netns()
It's pointless to call WARN_ON() in case of an allocation failure in
dev_change_net_namespace() and device_rename(), since it only leads to
useless splats caused by deliberate fault injections, so avoid it.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
In the Linux kernel, the following vulnerability has been resolved:
veth: fix NAPI leak in XDP enable error path
During XDP enablement in veth, if xdp_rxq_info_reg() or
xdp_rxq_info_reg_mem_model() fails, the driver rolls back the changes.
However, the rollback loop:
for (i--; i >= start; i--) {
decrements the loop index 'i' before the first iteration. This
correctly skips unregistering the rxq for the failed index 'i' (as
registration failed or was already cleaned up), but it also
erroneously skips calling netif_napi_deli() for rq[i].xdp_napi.
Since netif_napi_add() was already called for index 'i', this leaves
a dangling napi_struct i
ACPI: processor_idle: Mark LPI enter functions as __cpuidle
In the Linux kernel, the following vulnerability has been resolved:
ACPI: processor_idle: Mark LPI enter functions as __cpuidle
When function tracing or Kprobes is enabled, entering an ACPI Low
Power Idle (LPI) state triggers the following RCU splat:
RCU not on for: acpi_idle_lpi_enter+0x4/0xd8
WARNING: CPU: 8 PID: 0 at include/linux/trace_recursion.h:162 function_trace_call+0x1e8/0x228
The acpi_idle_lpi_enter() function is invoked within the cpuidle
path after RCU has already been disabled for the current local CPU.
Consequently, ftrace's function_trace_call() expects RCU to be
actively watching before recording trace data, emitting
In the Linux kernel, the following vulnerability has been resolved:
qede: fix out-of-bounds check for cqe->len_list[]
Move index check before element access.
Без оценкиEPSS 0,21%Нет опубликованного исправления
tracing/probes: Remove WARN_ON_ONCE from parse_btf_arg
In the Linux kernel, the following vulnerability has been resolved:
tracing/probes: Remove WARN_ON_ONCE from parse_btf_arg
Sashiko found that user can cause this WARN_ON_ONCE() easily
with adding a kprobe event based on a raw address with BTF
parameter.
Since this is not an unexpected condition, remove the
WARN_ON_ONCE().
HID: picolcd: prevent NULL pointer dereference in picolcd_send_and_wait()
In the Linux kernel, the following vulnerability has been resolved:
HID: picolcd: prevent NULL pointer dereference in picolcd_send_and_wait()
In picolcd_send_and_wait(), an integer overflow of the signed loop counter
'k' can theoretically lead to a NULL pointer dereference of 'raw_data'.
If the loop executes more than INT_MAX times, 'k' becomes negative,
making the condition 'k < size' true even when 'size' is 0.
Change the type of 'k' to 'unsigned int' to prevent the overflow and
eliminate the out-of-bounds access.
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.
[jkosina@suse.com: extended hash
In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_irc: fix parse_dcc() off-by-one OOB read
parse_dcc() treats data_end as an inclusive end pointer, but its only
caller passes data_limit = ib_ptr + datalen, which points one past the
last valid byte.
The newline search loop iterates while tmp <= data_end, so when no
newline is present, *tmp is read at tmp == data_end, one byte beyond
the region filled by skb_header_pointer().
irc_buffer is kmalloc'd as MAX_SEARCH_SIZE + 1 bytes and datalen is
capped at MAX_SEARCH_SIZE, so the stray read does not fault. The byte
is uninitialized or stale; if it cont
In the Linux kernel, the following vulnerability has been resolved:
perf/x86/amd/lbr: Fix kernel address leakage
A user-only branch stack can contain branches that originate from
the kernel. As a result, kernel addresses are exposed to user space
even when PERF_SAMPLE_BRANCH_USER is requested. On AMD processors
supporting X86_FEATURE_AMD_LBR_V2, perf can still report SYSRET/ERET
entries for which the branch-from addresses are in the kernel.
E.g.
$ perf record -e cycles -o - -j any,save_type,u -- \
perf bench syscall basic --loop 1000 | \
perf script -i - -F brstack|tr ' ' '\n'| \
grep -E '0x[89a-f][0-9a-f]{15}'
batman-adv: gw: acquire ethernet header only after skb realloc
In the Linux kernel, the following vulnerability has been resolved:
batman-adv: gw: acquire ethernet header only after skb realloc
The pskb_may_pull() called by batadv_get_vid() could reallocate the buffer
behind the skb. Variables which were pointing to the old buffer need to be
reassigned to avoid an use-after-free.
batman-adv: dat: acquire ARP hw source only after skb realloc
In the Linux kernel, the following vulnerability has been resolved:
batman-adv: dat: acquire ARP hw source only after skb realloc
The pskb_may_pull() called by batadv_get_vid() could reallocate the buffer
behind the skb. Variables which were pointing to the old buffer need to be
reassigned to avoid an use-after-free.
batman-adv: dat: ensure accessible eth_hdr proto field
In the Linux kernel, the following vulnerability has been resolved:
batman-adv: dat: ensure accessible eth_hdr proto field
When batadv_get_vid() accesses the proto field of the ethernet header, it
is not checking if the data itself is accessible. The caller is responsible
for it. But in contrast to other call sites, batadv_dat_get_vid() and its
caller didn't make sure this is true. This could have caused an
out-of-bounds access.
In the Linux kernel, the following vulnerability has been resolved:
ntfs3: fix out-of-bounds read in decompress_lznt
decompress_lznt() does not validate array index bounds before accessing
the decompression table. A corrupted NTFS3 image with invalid compressed
data can trigger an out-of-bounds read.
Add index bounds checking to prevent the OOB access.
mtd: maps: vmu-flash: fix NULL pointer dereference in initialization
In the Linux kernel, the following vulnerability has been resolved:
mtd: maps: vmu-flash: fix NULL pointer dereference in initialization
The mtd_info contains a struct device, which must be linked to its
parent. Without this, the initialization of the MTD fails with a NULL
pointer dereference.
In the Linux kernel, the following vulnerability has been resolved:
Input: ims-pcu - add response length checks
The driver processes response data from device buffers without verifying
that the device actually sent enough data. This can lead to
out-of-bounds reads or processing stale data.
Add checks for the expected response length before accessing the
buffers.
Input: ims-pcu - fix potential infinite loop in CDC union descriptor parsing
In the Linux kernel, the following vulnerability has been resolved:
Input: ims-pcu - fix potential infinite loop in CDC union descriptor parsing
The driver parses CDC union descriptors in ims_pcu_get_cdc_union_desc()
by iterating through the extra descriptor data. However, it does not
verify that the bLength of each descriptor is at least 2. A malicious
device could provide a descriptor with bLength = 0, leading to an
infinite loop in the driver.
Add a check to ensure bLength is at least 2 before proceeding with
parsing.
hwmon: (asus_atk0110) Check package count before accessing element
In the Linux kernel, the following vulnerability has been resolved:
hwmon: (asus_atk0110) Check package count before accessing element
atk_ec_present() walks the management group package returned by the GGRP
ACPI method and, for each sub-package, reads its first element:
id = &obj->package.elements[0];
if (id->type != ACPI_TYPE_INTEGER)
without checking that the sub-package is non-empty. ACPICA allocates the
element array with exactly package.count entries, so for a sub-package
with a zero count this reads past the allocation.
The sibling function atk_debugfs_ggrp_open() performs the same access but
skips empty packages with a package
f2fs: fix listxattr handling of corrupted xattr entries
In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix listxattr handling of corrupted xattr entries
Validate the xattr entry before reading its fields in f2fs_listxattr().
Return -EFSCORRUPTED when the entry is outside the valid xattr storage
area instead of returning a successful partial result.
Высокий · CVSS 8.6EPSS 0,58%Нет опубликованного исправления
inet: frags: strip GSO state from fragments before reassembly
In the Linux kernel, the following vulnerability has been resolved:
inet: frags: strip GSO state from fragments before reassembly
A virtio_net_hdr (tun/tap, or AF_PACKET with PACKET_VNET_HDR) can mark
an IPv4 or IPv6 fragment as GSO; nothing relates gso_type to frag_off.
inet_frag_reasm_prepare()/inet_frag_reasm_finish() keep the first
fragment's skb as the head of the reassembled datagram, including its
shinfo->gso_size/gso_type/gso_segs, and chain the remaining fragments
on frag_list with whatever linear/paged layout they arrived with.
After ip_defrag() (ip_local_deliver(), nf_defrag_ipv4, ...) the
reassembled skb therefore still claims
block: stop the timeout timer when releasing a never added disk
In the Linux kernel, the following vulnerability has been resolved:
block: stop the timeout timer when releasing a never added disk
disk_release() undoes blk_mq_init_allocated_queue() for a disk whose
probe failed before add_disk(), but it only calls blk_mq_exit_queue().
Nothing there stops q->timeout, and that timer rolls forward: it stays
pending until it next expires, not until the last request completes.
So if the driver issued any I/O before adding the disk, the
request_queue is freed while still linked into a timer wheel bucket.
Commit 6f8191fdf41d ("block: simplify disk shutdown") dropped the
blk_cleanup_queue() call that used to st