time/namespace: Validate nanosecond field in proc_timens_set_offset()
In the Linux kernel, the following vulnerability has been resolved:
time/namespace: Validate nanosecond field in proc_timens_set_offset()
The function validates tv_sec to be within [-KTIME_SEC_MAX, KTIME_SEC_MAX]
but never validates that tv_nsec is within the valid range of
[0, NSEC_PER_SEC-1] before using it in timespec64_add().
timespec64_add() expects both timespec64 structures to have normalized
values with tv_nsec in the range [0, 999999999]. If off->val.tv_nsec
contains invalid values (negative or >= NSEC_PER_SEC), it could lead to
incorrect calculations or unexpected behavior.
Add validation to ensure tv_nsec is within the valid ra
Без оценкиEPSS 0,22%Нет опубликованного исправления
clk: qcom: gdsc: tear down per-domain genpds in gdsc_unregister()
In the Linux kernel, the following vulnerability has been resolved:
clk: qcom: gdsc: tear down per-domain genpds in gdsc_unregister()
gdsc_unregister() removes the OF provider entry and tears down the
parent/subdomain wiring, but never calls pm_genpd_remove() on the
individual generic_pm_domain structures registered by gdsc_init():
void gdsc_unregister(struct gdsc_desc *desc)
{
struct device *dev = desc->dev;
size_t num = desc->num;
gdsc_pm_subdomain_remove(desc, num);
of_genpd_del_provider(dev->of_node);
}
That leaves dangling entries on the global gpd_list. After a provider
unbind/rebind cycle (deferred-probe replay during e
Высокий · CVSS 7.8EPSS 0,18%Нет опубликованного исправления
bpf: Reject writes through untrusted BTF pointers
In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject writes through untrusted BTF pointers
check_ptr_to_btf_access() lets program-type btf_struct_access callbacks
validate writes before the default BTF access path rejects non-read
accesses. That bypasses the read-only policy for untrusted BTF pointers
created by helpers such as bpf_rdonly_cast().
Reject non-read accesses through PTR_UNTRUSTED BTF pointers at the
common entry point, before the callback branch to handle all cases.
Без оценкиEPSS 0,21%Нет опубликованного исправления
staging: media: ipu7: fix pm_runtime refcount leak in ipu7_resume()
In the Linux kernel, the following vulnerability has been resolved:
staging: media: ipu7: fix pm_runtime refcount leak in ipu7_resume()
ipu7_resume() calls pm_runtime_get_sync() before resuming the device.
If the runtime PM resume fails, the usage count remains incremented, but
the error path returns without dropping the reference.
Use pm_runtime_resume_and_get() instead, which balances the usage count
on failure and avoids the leak. Keep returning 0 on error, as resume
callbacks should not propagate failures to the PM core, matching the
behaviour of the ipu6 driver.
Без оценкиEPSS 0,21%Нет опубликованного исправления
thermal/drivers/rcar: Fix error checking in probe()
In the Linux kernel, the following vulnerability has been resolved:
thermal/drivers/rcar: Fix error checking in probe()
This code accidentally calls thermal_zone_device_enable() before checking
whether thermal_zone_device_register_with_trips() failed. Move the call
until later to avoid an error pointer dereference of "priv->zone".
The driver works differently depending on if we are using OF thermal or
not. We use thermal_add_hwmon_sysfs() if we are using OF thermal and
call thermal_zone_device_enable() if not. We can share same error check
for if either of these fail.
Moving the thermal_zone_device_enable() call is a bit cleaner as wel
Без оценкиEPSS 0,22%Нет опубликованного исправления
usb: gadget: r8a66597: avoid double free of ep0_req in probe error path
In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: r8a66597: avoid double free of ep0_req in probe error path
If usb_add_gadget_udc() fails, r8a66597_probe() jumps to err_add_udc
and frees ep0_req, then falls through to clean_up2 where ep0_req is
freed again when it is non-NULL.
Remove the redundant free from err_add_udc and keep the cleanup in
clean_up2 so the request is released exactly once.
Issue found using a prototype static analysis tool
and confirmed by code review.
Без оценкиEPSS 0,22%Нет опубликованного исправления
udf: Mark LVID buffer as uptodate before marking it dirty
In the Linux kernel, the following vulnerability has been resolved:
udf: Mark LVID buffer as uptodate before marking it dirty
When an I/O error occurs while writing the Logical Volume Integrity
Descriptor (LVID) buffer to the block device, the block layer's completion
handler (`end_buffer_write_sync()`) clears the `BH_Uptodate` flag on the
buffer. However, the buffer still contains valid LVID data in memory. If
the filesystem is subsequently remounted read-write or synced,
`udf_open_lvid()` or `udf_sync_fs()` will modify the LVID buffer and call
`mark_buffer_dirty()`. This triggers a spurious
`WARN_ON_ONCE(!buffer_uptodate(bh))` warning in
Высокий · CVSS 7.8EPSS 0,18%Нет опубликованного исправления
bpf: Fix vmlinux BTF prep race in bpf_get_btf_vmlinux
In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix vmlinux BTF prep race in bpf_get_btf_vmlinux
bpf_get_btf_vmlinux() lazily parses the vmlinux BTF under the
bpf_verifier_lock, but publishes the result through a plain store
and re-checks it through a plain lockless load. Nothing orders
the stores initializing the struct btf inside btf_parse_vmlinux()
against the store publishing the pointer: On a weakly ordered
arch, a concurrent first-time caller taking the lockless fast
path could in principle observe the pointer before the parsed
contents are visible. The mutex_unlock() does not help such a
reader given it only
Высокий · CVSS 7.8EPSS 0,16%Нет опубликованного исправления
bpf: Fix use-after-free on mm_struct in bpf_find_vma()
In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix use-after-free on mm_struct in bpf_find_vma()
bpf_find_vma() reads task->mm and calls mmap_read_trylock(mm) without
holding a reference on the mm. On a foreign task, a concurrent exit_mm()
can free the mm_struct between the lockless read and the trylock,
resulting in a use-after-free. mm_struct is not SLAB_TYPESAFE_BY_RCU.
For the current task, task->mm is stable. For a foreign task, pin the mm
under task->alloc_lock and release it with mmput_async(), mirroring commit
d8e27d2d22b6 ("bpf: fix mm lifecycle in open-coded task_vma iterator").
Use spin_trylock() instea
Без оценкиEPSS 0,21%Нет опубликованного исправления
bus: mhi: ep: Fix device refcount leak in the error path of MHI device creation
In the Linux kernel, the following vulnerability has been resolved:
bus: mhi: ep: Fix device refcount leak in the error path of MHI device creation
mhi_ep_create_device() takes one device reference for the UL channel and
another for the DL channel after allocating the transfer device. These
references are normally released by mhi_ep_destroy_device() before the
device itself is removed.
If dev_set_name() or device_add() fails, the error path currently drops
only one reference. The remaining channel references keep the device
from being released and leave the channels associated with a device that
was never registered.
Route both failures t
Без оценкиEPSS 0,2%Нет опубликованного исправления
bpf: Reject programs with inlined helpers if JIT is not available
In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject programs with inlined helpers if JIT is not available
When an architecture (such as LoongArch, ARM64, and RISC-V) implements
bpf_jit_inlines_helper_call(), the verifier skips rewriting the helper
call offset (insn->imm) in bpf_do_misc_fixups(). This is because the
helper is expected to be inlined by the JIT compiler later. Therefore,
insn->imm remains as the raw helper enum ID.
However, if JIT is disabled at runtime (net.core.bpf_jit_enable=0) or
if JIT compilation fails dynamically (e.g., due to OOM), the program
falls back to the BPF interpreter.
When the in
Без оценкиEPSS 0,21%Нет опубликованного исправления
printk: Fix possible console use-after-free
In the Linux kernel, the following vulnerability has been resolved:
printk: Fix possible console use-after-free
When emitting a record via legacy printing, it is possible that a handover
to another legacy printing context occurs. When a context has performed a
handover, the console SRCU read lock is released and the pointer to the
console struct might now be invalid. Therefore, after calling
nbcon_legacy_emit_next_record() or console_emit_next_record(), it is
necessary to check if a handover occurred _before_ further @con usage.
Sashiko pointed out that console_flush_one_record() was not doing this.
In console_flush_one_record(), after em
Без оценкиEPSS 0,21%Нет опубликованного исправления
ACPI: RISC-V: Check acpi_get_handle() status in riscv_acpi_add_prt_dep()
In the Linux kernel, the following vulnerability has been resolved:
ACPI: RISC-V: Check acpi_get_handle() status in riscv_acpi_add_prt_dep()
In riscv_acpi_add_prt_dep(), the acpi_get_handle() call can fail which
would leave link_handle uninitialized.
Fix it by checking the acpi_get_handle() return status and skip the entry
if it fails.
In the Linux kernel, the following vulnerability has been resolved:
ACPI: RISC-V: Fix riscv_acpi_add_prt_dep() loop handling
The loop in riscv_acpi_add_prt_dep() includes error conditions that are
handled in a dubious - if not outright wrong - way, by continuining the
loop (which skips and misses the entry pointer update to point to the next
entry).
Rewrite the loop as a for loop (that handles the continuation correctly)
and wrap the condition and update statements using helper functions to make
it cleaner.
Без оценкиEPSS 0,21%Нет опубликованного исправления
platform/x86: dell-privacy: Fix race condition
In the Linux kernel, the following vulnerability has been resolved:
platform/x86: dell-privacy: Fix race condition
Accessing priv->features_present needs to happen with the list mutex
being held, otherwise priv can be freed at any moment.
Без оценкиEPSS 0,21%Нет опубликованного исправления
platform/x86: dell-wmi-base: Fix resource leak on module load failure
In the Linux kernel, the following vulnerability has been resolved:
platform/x86: dell-wmi-base: Fix resource leak on module load failure
We need to properly clean up the SMBIOS request and the privacy driver
when the module load fails.
Без оценкиEPSS 0,21%Нет опубликованного исправления
platform/x86: dell-wmi-base: Fix handling of ultra performance key
In the Linux kernel, the following vulnerability has been resolved:
platform/x86: dell-wmi-base: Fix handling of ultra performance key
The commit message of commit 5fbd827eb9c2 ("platform/x86: dell-wmi: Recognise or support new switches")
states that the ultra performance key contains additional data
after the type and code fields. The event data passed to
dell_wmi_process_key() is already parsed, so "buffer" already
starts after those two fields.
Use the correct index for accessing the first data field to avoid
a potential buffer overread.
Без оценкиEPSS 0,21%Нет опубликованного исправления
platform/x86: lg-laptop: Fix LED resource handling
In the Linux kernel, the following vulnerability has been resolved:
platform/x86: lg-laptop: Fix LED resource handling
The event notification callback might access kbd_backlight even
when it was not successfully registered with the LED subsystem.
The same happens inside acpi_remove(), where the LED devices are
unregistered unconditionally.
Fix this by tracking the availability of the kbd_backlight LED
device and use devm_led_classdev_register() to let devres take
care of unregistering the LED devices during removal. For this
the parent device of the LED devices is changed to the native
platform device.
Высокий · CVSS 7.8EPSS 0,17%Нет опубликованного исправления
bpf: Drop scalar id on sign-extending narrowing stack fills
In the Linux kernel, the following vulnerability has been resolved:
bpf: Drop scalar id on sign-extending narrowing stack fills
When a spilled scalar is filled back with a sign-extending narrowing load
(BPF_MEMSX), check_stack_read_fixed_off() copies the spilled register
including its scalar id, but coerce_reg_to_size_sx() then sign-extends the
filled register's value. If the same slot is also filled with a plain
zero-extending load (BPF_MEM), both destination registers share the id yet
hold different values. A later 'if <zext-reg> == const' then refines the
sign-extended register through sync_linked_regs() to a value it does not
have at ru
Без оценкиEPSS 0,2%Нет опубликованного исправления
remoteproc: qcom_q6v5_adsp: Fix reference leak for device node
In the Linux kernel, the following vulnerability has been resolved:
remoteproc: qcom_q6v5_adsp: Fix reference leak for device node
When calling of_parse_phandle_with_args(), the caller is responsible
to call of_node_put() to release the reference of device node.
In adsp_map_carveout, it does not release the reference.