PatchFirst · Свежие уязвимости
За последние 30 дней в linux-azure опубликовано уязвимостей: 1045; в каталоге KEV: 0.
Уязвимостей: 6362
In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Avoid freeing unallocated PCIe SGL buffers _base_release_memory_pools() unconditionally frees every ioc->pcie_sg_lookup[] entry, including ones the setup loop never allocated after a partial failure, causing a "bad dma" warning on debug kernels or a NULL pointer dereference otherwise.
In the Linux kernel, the following vulnerability has been resolved: net: page_pool: fix UAF in __page_pool_release_netmem_dma on xa_cmpxchg race This bug was discovered while testing the hns3 driver under channel reconfiguration (`ethtool -L` / `ethtool -G`) with iperf3 traffic on arm64. The race is intermittently triggered when page_pool_destroy() runs page_pool_scrub() concurrently with page return via page_pool_put_netmem() on a different CPU. A WARN in page_pool_clear_pp_info() surfaced the dangling DMA index bits left by the cmpxchg loser, which led to the investigation. page_pool_scrub() iterates pool->dma_mapped via xa_for_each() wi
In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: fix integer overflow in MFT cluster validation In ntfs_init_from_boot(), the boot sector's MFT cluster numbers are validated against the volume size with: if (mlcn * sct_per_clst >= sectors || mlcn2 * sct_per_clst >= sectors) goto out; mlcn and mlcn2 are u64 fields read directly from the boot sector. sct_per_clst is bounded above by 4096 (true_sectors_per_clst() plus the is_power_of_2() check below it), but the multiplication is done in u64 and wraps when mlcn (or mlcn2) is large enough -- e.g. mlcn near 2^62 with sct_per_clst == 4 wraps to 0, which com
In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: reject out-of-range evcn in mi_enum_attr() In mi_enum_attr(), the start/end VCN validation for non-resident attributes is: if (svcn > evcn + 1) goto out; When evcn is U64_MAX the "evcn + 1" expression wraps to 0 and any svcn passes the check. For evcn values close to U64_MAX (but not equal to it) the right-hand side is still a meaningless near-wrap upper bound, so a malformed on-disk attribute with svcn == 0 and evcn near U64_MAX can pass mi_enum_attr() unrejected. VCN (virtual cluster number) is a cluster index, so any valid evcn is bounded by the volume's to
In the Linux kernel, the following vulnerability has been resolved: ALSA: core: Fix use-after-free in snd_card_do_free() A use-after-free was detected in snd_card_do_free() when a sound card managed by devres is unbound while a user-space application still holds an open file descriptor. For managed cards, the memory is allocated using devres_alloc(), and its release function is set to __snd_card_release(), which calls snd_card_free(). When the device is unbound, the unbind thread calls snd_card_free(), which drops a reference to the card's device. If the user thread still has an open file descriptor, the reference count does not reach zero
In the Linux kernel, the following vulnerability has been resolved: HID: haptic: don't write an uninitialized value to unhandled usages fill_effect_buf() initializes value only for the four haptic usages handled by its switch, but writes it to field->value[] for every usage. An unhandled usage can therefore receive either an uninitialized value or one left over from the previous usage. hid_output_report() then serializes that value into the effect's report buffer. Skip unhandled usages instead. This also matches switch_mode(), which only updates fields it recognizes. Found with Clang's -Wconditional-uninitialized.
In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: validate topology volume range before allocation SOF treats the topology mixer min and max values as non-negative indices into its volume table. It stores them in signed fields, allocates max + 1 entries through an int argument, and later indexes the table with the stored range. An inverted range is invalid, while a maximum at or above INT_MAX cannot be represented safely after the increment or in the signed fields. Validate the complete range before storing it or allocating the table.
In the Linux kernel, the following vulnerability has been resolved: riscv, bpf: Fix missing sign-ext for signed 1-byte and 2-byte kfunc args On RV64, the ABI requires sign-extension for signed 1-byte and 2-byte kfunc args. However, the RV64 JIT currently does not perform sign-extension for such kfunc args. Before commit 7ce090afbf72 ("bpf: Infer zext_dst based on static register liveness analysis"), state pruning could potentially omit zero-extension of 32-bit subregisters, which inadvertently masked the above issue by making the args appear as if they had been properly sign-extended. After that commit, the problem is exposed, causing the
In the Linux kernel, the following vulnerability has been resolved: ACPI: scan: fix bus ID cleanup on device_add() failures When device_add() fails after acpi_device_set_name() has allocated an instance ID and a new acpi_device_bus_id has been linked into acpi_bus_id_list, the rollback path only removes wakeup_list and detaches the ACPI handle data. That leaves the bus-ID bookkeeping behind and keeps the allocated instance number consumed. Move the bus-ID cleanup and wakeup-list removal into a single helper. Use it from both the normal device teardown path and the device_add() rollback path. The wakeup list node is initialized before reg
In the Linux kernel, the following vulnerability has been resolved: mailbox: qcom-cpucp: fix PREEMPT_RT self-deadlock in IRQ handler qcom_cpucp_mbox_irq_fn() calls mbox_chan_received_data() while holding chan->lock. Under PREEMPT_RT, spin_lock_irqsave() is converted to an rt_spinlock (rtmutex-based), which tracks ownership and can sleep. The callback chain triggered by mbox_chan_received_data() eventually reaches mailbox_clear_channel() -> mbox_send_message() -> add_to_rbuf(), which attempts to re-acquire the same chan->lock. Since rtmutex detects the re-entrant lock attempt by the same owner, the thread blocks waiting for a lock it alread
In the Linux kernel, the following vulnerability has been resolved: mailbox: qcom-cpucp: handle NULL data in send_data callback mailbox_clear_channel() calls mbox_send_message() with NULL data to notify the remote side that the RX channel has been cleared. qcom_cpucp_mbox_send_data() blindly dereferenced the data pointer, causing a NULL pointer dereference kernel panic when invoked from this path under PREEMPT_RT. Add an explicit NULL check and return early without writing to the TX register, which is the correct behaviour for a channel-clear notification.
In the Linux kernel, the following vulnerability has been resolved: mailbox: riscv-sbi-mpxy: validate RPMI notification lengths The SBI return value controls how many bytes are copied from shared memory into the RPMI notification buffer. It is not validated against the negotiated shared-memory size before that copy. The event walker also uses a reversed loop condition and can inspect a short event record. Validate the complete notification length before copying it, iterate only while a full event header remains, and stop when a declared event payload extends beyond the copied notification data.
In the Linux kernel, the following vulnerability has been resolved: null_blk: use DEFINE_MUTEX for the file-scope mutex In null_init(), mutex_init(&lock) currently happens after configfs_register_subsystem(), which exposes the nullb subsystem to userspace. A racing mkdir() into /sys/kernel/config/nullb/ can reach null_find_dev_by_name() -> mutex_lock(&lock) before the mutex is initialized, trigger warning: [ 123.137788] DEBUG_LOCKS_WARN_ON(lock->magic != lock) [ 123.137796] WARNING: kernel/locking/mutex.c:159 at mutex_lock+0x171/0x1c0, CPU#13: mkdir/1301 [ 123.140090] Modules linked in: null_blk(+) nft_fib_inet nft_fib_ipv4 ...... [ 12
In the Linux kernel, the following vulnerability has been resolved: null_blk: register configfs subsystem after creating default devices In null_init(), configfs_register_subsystem() currently runs before register_blkdev(), so when null_blk is built as a module, a racing mkdir() + poweron from userspace can reach null_add_dev() while null_major is still 0. __add_disk() then hits WARN_ON(disk->minors) (major=0 with minors!=0) and fails: [root@fedora ~]# [ 2366.521436] WARNING: block/genhd.c:476 at __add_disk+0x8a7/0xde0, [ 2366.523552] Modules linked in: null_blk(+) nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib [ 2366.529081] CPU: 26 UID:
In the Linux kernel, the following vulnerability has been resolved: null_blk: free global tag_set on init error path If shared_tags is enabled, null_setup_tagset() allocates the global tag_set via null_init_global_tag_set(). If device creation later fails, err_dev destroys the default devices and calls unregister_blkdev(), but never frees the global tag_set. Since module init failed, null_exit() is never invoked, so the global tag_set's tags and maps are permanently leaked. Free the global tag_set in err_dev, matching null_exit() which does if (tag_set.ops) blk_mq_free_tag_set(&tag_set).
In the Linux kernel, the following vulnerability has been resolved: null_blk: free zones array on device power-off null_init_zoned_dev() allocates dev->zones when a zoned device is powered on, but null_del_dev() never frees it on power-off; dev->zones is only freed later in null_free_dev(), when the configfs directory is removed. If the device is powered off and then on again, null_init_zoned_dev() allocates a new array and overwrites the dev->zones pointer, leaking the previous allocation each power cycle. Free dev->zones in null_del_dev() via null_free_zoned_dev() to solve it. And calling null_free_zoned_dev() in null_free_dev() is no lo
In the Linux kernel, the following vulnerability has been resolved: null_blk: reject per-device queue resize for shared tag set When shared_tags is enabled, null_setup_tagset() makes the device use the global tag_set, whose driver_data stays NULL. null_map_queues() therefore falls back to the module-wide g_submit_queues/g_poll_queues instead of any per-device value. Resizing submit_queues or poll_queues via configfs on such a device calls blk_mq_update_nr_hw_queues() on the shared set, shrinking set->nr_hw_queues. __blk_mq_realloc_hw_ctxs() only grows the q->queue_hw_ctx[] allocation, so on shrink it merely exits and NULLs the now-excess
In the Linux kernel, the following vulnerability has been resolved: null_blk: serialize configfs attribute stores with the lock The NULLB_DEVICE_ATTR _store takes no lock: apply_fn attributes (submit_queues, poll_queues) get dev->NAME written again after apply_fn returns, outside its lock; APPLY=NULL attributes are entirely lockless. configfs only serializes stores per-open-file, so concurrent stores on separate fds race. For apply_fn attributes, once one store's apply_fn has reconfigured the hardware, a second (losing) store can still overwrite dev->NAME afterwards. This leaves dev->submit_queues out of sync with the live queue count, whi
In the Linux kernel, the following vulnerability has been resolved: null_blk: serialize configfs attribute updates with device setup The attribute store methods generated with NULLB_DEVICE_ATTR() refuse to change the configuration of a live device by testing NULLB_DEV_FL_CONFIGURED, but that flag is only set by nullb_device_power_store() after null_add_dev() has returned, and the store methods take no lock at all. configfs only serializes writes to the same open file (buffer->mutex), so a write to any attribute can run concurrently with null_add_dev() and change the device configuration while it is being used. null_add_dev() reads the conf
In the Linux kernel, the following vulnerability has been resolved: blk-iolatency: clear delay state when freeing policy data io.latency can throttle a group which has no latency target of its own. When a sibling misses its target, check_scale_change() scales down its peers, and a peer that reaches queue depth one gets blkcg_use_delay() called on it on every further scale-down, even with min_lat_nsec == 0. iolatency_pd_offline() resets the target through iolatency_set_min_lat_nsec(), which clears the delay only on a nonzero to zero transition, so it never clears such a peer. Freeing the policy data then leaves blkg->use_delay set and blkc
Сопоставьте установленный стек и версии со свежими базами уязвимостей.