Уязвимости linux-azure · Страница 146

crypto: xilinx-trng - Remove crypto_rng interface

In the Linux kernel, the following vulnerability has been resolved: crypto: xilinx-trng - Remove crypto_rng interface Implementing the crypto_rng interface has no purpose, as it isn't used in practice. It's being removed from other drivers too. Just remove it. This leaves hwrng, which is actually used. Tagging with 'Cc stable' due to the bugs that this removes: - xtrng_trng_generate() sometimes returned success even when it didn't fill in all the bytes. - It was possible for xtrng_trng_generate() and xtrng_hwrng_trng_read() to run concurrently and interfere with each other, as the locking code in xtrng_hwrng_trng_read(

• Обновитесь до 7.0.0-1017.17

drm/amdkfd: Validate CRIU-restored IDs before idr_alloc

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Validate CRIU-restored IDs before idr_alloc The KFD CRIU restore flow restores previously saved object IDs from userspace. For event restore: kfd_criu_restore_event() -> create_signal_event() / create_other_event() -> allocate_event_notification_slot() -> idr_alloc(..., *restore_id, *restore_id + 1, ...) For BO restore: criu_restore_memory_of_gpu() -> idr_alloc(..., bo_priv->idr_handle, ...) In both cases, the restored ID comes from userspace-provided CRIU data. idr_alloc() expects the ID range values to fit within s

• Обновитесь до 7.0.0-1017.17

ntfs3: Allocate iomap inline_data using alloc_page

In the Linux kernel, the following vulnerability has been resolved: ntfs3: Allocate iomap inline_data using alloc_page This fixes a BUG reported in iomap_write_end_inline: iomap_inline_data_valid checks that the inline_data fits within a page. If the inline_data is allocated with kmemdup there's no guarantee that it's page-aligned, so the check sometimes fails. Allocate it with alloc_page to ensure it's page-aligned.

• Обновитесь до 7.0.0-1017.17

alpha/PCI: Add security_locked_down() check to pci_mmap_resource()

In the Linux kernel, the following vulnerability has been resolved: alpha/PCI: Add security_locked_down() check to pci_mmap_resource() Currently, Alpha's pci_mmap_resource() does not check security_locked_down(LOCKDOWN_PCI_ACCESS) before allowing userspace to mmap PCI BARs. The generic version has had this check since commit eb627e17727e ("PCI: Lock down BAR access when the kernel is locked down") to prevent DMA attacks when the kernel is locked down. Add the same check to Alpha's pci_mmap_resource().

• Обновитесь до 7.0.0-1017.17

tipc: avoid busy looping in tipc_exit_net()

In the Linux kernel, the following vulnerability has been resolved: tipc: avoid busy looping in tipc_exit_net() Blamed commit introduced a busy-wait loop in tipc_exit_net() to wait for pending UDP bearer cleanup works to complete: while (atomic_read(&tn->wq_count)) cond_resched(); This loop can busy-wait for a long time if cond_resched() is a NOP. This typically happens if the netns exit is executed by a high priority task, or under kernels configured without preemption (CONFIG_PREEMPT_NONE). In such cases, it wastes CPU cycles and can lead to soft lockups. Fix this by replacing the busy loop with wait_var_event(),

• Обновитесь до 7.0.0-1017.17

bpf: Add missing access_ok call to copy_user_syms

In the Linux kernel, the following vulnerability has been resolved: bpf: Add missing access_ok call to copy_user_syms As reported by sashiko we use __get_user without prior access_ok call on the user space pointer. Adding the missing call for the whole pointer array. Plus removing the err check in the error path, because it's not needed and also we can return -ENOMEM directly from the first kvmalloc_array fail path. [1] https://lore.kernel.org/bpf/20260611115503.AC16D1F00893@smtp.kernel.org/

• Обновитесь до 7.0.0-1017.17

UBUNTU-CVE-2026-80811

In the Linux kernel, the following vulnerability has been resolved: io_uring/cmd: fix iovec leak when the async cmd is not recycled An io_async_cmd carries an iovec array in ->vec.iovec, allocated when the vec has to grow and kept across recycling through ctx->cmd_cache. On two paths nothing frees it and io_clean_op()'s kfree(req->async_data) drops the io_async_cmd without it. io_req_uring_cleanup() clears the async data flags only when io_alloc_cache_put() succeeds, and the cache holds IO_ALLOC_CACHE_MAX == 128 entries, so once it is full the put fails and the vec is left behind. An NVMe passthrough workload gets there without doing anythin

RDMA/rxe: Fix responder UAF on IB_QP_MAX_DEST_RD_ATOMIC modify_qp

In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix responder UAF on IB_QP_MAX_DEST_RD_ATOMIC modify_qp rxe_qp_from_attr() handles IB_QP_MAX_DEST_RD_ATOMIC outside the IB_QP_STATE path, so it holds no state_lock and runs while the responder task rxe_receiver() (recv_task on rxe_wq) is live. A modify_qp() setting only that attribute calls free_rd_atomic_resources() then alloc_rd_atomic_resources(), swapping qp->resp.resources[] while rxe_prepare_res()/find_resource() walk it; free_rd_atomic_resources() also leaves the cached pointer qp->resp.res dangling. A local unprivileged user can race the free/realloc into

RDMA/rxe: Fix OOB in free_rd_atomic_resources()

In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix OOB in free_rd_atomic_resources() free_rd_atomic_resources() iterates using qp->attr.max_dest_rd_atomic. Updating max_dest_rd_atomic before freeing the old array can make the free path walk past the old allocation and trigger a slab out-of-bounds write catched by KASAN: ================================================================== BUG: KASAN: slab-out-of-bounds in free_rd_atomic_resource drivers/infiniband/sw/rxe/rxe_qp.c:180 [inline] BUG: KASAN: slab-out-of-bounds in free_rd_atomic_resources drivers/infiniband/sw/rxe/rxe_qp.c:171 [inline] BUG: KASAN: sla

nvme-tcp: fix usage of page_frag_cache

In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: fix usage of page_frag_cache nvme uses page_frag_cache to preallocate PDU for each preallocated request of block device. Block devices are created in parallel threads, consequently page_frag_cache is used in not thread-safe manner. That leads to incorrect refcounting of backstore pages and premature free. That can be catched by !sendpage_ok inside network stack: WARNING: CPU: 7 PID: 467 at ../net/core/skbuff.c:6931 skb_splice_from_iter+0xfa/0x310. tcp_sendmsg_locked+0x782/0xce0 tcp_sendmsg+0x27/0x40 sock_sendmsg+0x8b/0xa0 nvme_tcp_try_send_cmd_pdu+0x149/0x2a

usb: xhci: bail out of setup if the controller is inaccessible

In the Linux kernel, the following vulnerability has been resolved: usb: xhci: bail out of setup if the controller is inaccessible xhci_gen_setup() locates the operational registers using the capability length read from the very first register: xhci->op_regs = hcd->regs + HC_LENGTH(readl(&xhci->cap_regs->hc_capbase)); If the controller is dead or has dropped off the bus, that read returns ~0, HC_LENGTH() truncates it to 0xff, and op_regs ends up 0xff bytes past the page-aligned MMIO base, i.e. unaligned. The first access through it, xhci_halt() -> xhci_handshake() reading op_regs->status, is then an unaligned readl() on device memory.

fuse: fix race between interrupt and resend

In the Linux kernel, the following vulnerability has been resolved: fuse: fix race between interrupt and resend After commit f8fce75fedf7 ("fuse: clear intr_entry in fuse_resend and fuse_remove_pending_req") the WARN_ON(!list_empty(&req->intr_entry)) in fuse_request_free() still triggers due to the following race: In request_wait_answer() if (test_bit(FR_SENT, &req->flags)) -> returns true In fuse_chan_resend() clear_bit(FR_SENT, &req->flags) In request_wait_answer() queue_interrupt(req) Fix by: - move clearing FR_SENT inside fpq->lock - move setting FR_PENDING inside fiq->lock - recheck FR_SENT after acquiring fiq->lock in

fuse: fix missing barrier when checking io-uring readiness

In the Linux kernel, the following vulnerability has been resolved: fuse: fix missing barrier when checking io-uring readiness fuse_block_alloc() reads fch->initialized and then fch->io_uring. fch->io_uring is set before fch->initialized, ordered by the smp_wmb() in fuse_chan_set_intialized(), but fuse_block_alloc() has no matching read barrier between the two loads. This may lead a CPU to observe fch->initialized=1 but fch->io_uring=0, and skip the check that blocks request allocation until the io-uring queues are ready. This can reintroduce the lock-order inversion deadlock that commit 3393ff964e0f prevents. Add an smp_rmb() barrier to

fuse: publish io-uring queues with release semantics

In the Linux kernel, the following vulnerability has been resolved: fuse: publish io-uring queues with release semantics fuse_uring_create_queue() initializes a fuse_ring_queue and then publishes the pointer into ring->queues[qid] with WRITE_ONCE() under the fch->lock. There are several readers that may concurrently be fetching that pointer locklessly and then deferencing it. WRITE_ONCE() doesn't ensure ordering of the queue's field initialization before the ring->queues[qid] pointer assignment. The queue must be published with smp_store_release() so the field initialization is guaranteed to happen before. Readers in paths where the read

fuse: wait for FR_FINISHED on abort_on_kill to prevent use-after-free

In the Linux kernel, the following vulnerability has been resolved: fuse: wait for FR_FINISHED on abort_on_kill to prevent use-after-free The abort_on_kill path in request_wait_answer() calls fuse_abort_conn() and returns without waiting for FR_FINISHED. If fuse_dev_do_write() is concurrently processing the same request (FR_LOCKED set), the caller frees req->args while it is still being accessed, causing a use-after-free. Fix this by jumping to the existing wait_event(FR_FINISHED) instead of returning early. The wait will not hang because fuse_abort_conn() ensures all requests are ended.

fuse: fix invalidate lock leak on setattr writeback failure

In the Linux kernel, the following vulnerability has been resolved: fuse: fix invalidate lock leak on setattr writeback failure fuse_do_setattr() takes filemap_invalidate_lock() for a DAX truncate (fault_blocked = true) and releases it at the out:/error: labels. But when a writeback flush is also needed, a write_inode_now() failure returns directly and leaks the lock, so any later fault or truncate on the file stalls on the stale rwsem. For example, truncate(2) on a setuid file reaches fuse_do_setattr() with both ATTR_SIZE and ATTR_MODE set: truncate(2) └─ do_truncate() ├─ dentry_needs_remove_privs() # S_ISUID └─ no

fuse: fix invalidate lock leak on open O_TRUNC DAX failure

In the Linux kernel, the following vulnerability has been resolved: fuse: fix invalidate lock leak on open O_TRUNC DAX failure fuse_open() takes filemap_invalidate_lock() for a DAX truncate (dax_truncate = true) and releases it before the out_inode_unlock label. But when fuse_dax_break_layouts() fails, the goto out_inode_unlock skips the unlock and leaks the rwsem, so any later fault or truncate on the file stalls on the stale lock. fuse_dax_break_layouts() can fail with -ERESTARTSYS when a signal interrupts the wait for busy DAX pages to drain: open("file", O_RDWR | O_TRUNC) └─ fuse_open() ├─ filemap_invalidate_lock() #

usb: gadget: f_tcm: keep port count until LUN teardown completes

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_tcm: keep port count until LUN teardown completes tcm_usbg_drop_nexus() permits session removal once tpg_port_count reaches zero. However, usbg_port_unlink() currently decrements that count from the fabric_pre_unlink() callback, before core_dev_del_lun() waits for active se_lun references to drain. If removal of the last LUN races a nexus removal, the latter can observe a zero port count and call target_remove_session(). This frees sess_cmd_map while an in-flight struct usbg_cmd, including its work item, can still be accessed. Overlapping the last-LUN unlin

tls: device: fix out-of-bounds write in tls_append_frag()

In the Linux kernel, the following vulnerability has been resolved: tls: device: fix out-of-bounds write in tls_append_frag() Found with syzkaller and a local syzbot instance running on top of a netdevsim TLS offload emulation; tls_device.c is otherwise only reachable on a machine with a NIC that implements the offload. tls_push_data() only checks whether the open record still has room for another frag at the bottom of its loop, and the MSG_MORE early break skips that check. The record survives to the next syscall with the frag count it already had, and tls_append_frag() does not check either, so with TLS_TX_ZEROCOPY_RO every splice(SPLIC

gtp: serialize PDP context updates

In the Linux kernel, the following vulnerability has been resolved: gtp: serialize PDP context updates PDP contexts can be deleted through GTP_CMD_DELPDP or while the GTP network device is being unregistered. The latter is serialized by RTNL, but the generic-netlink delete path only holds RCU. Running both paths concurrently can therefore make both paths delete the same PDP context. The issue was found through static analysis and reproduced on a KASAN-enabled kernel by a simple two-thread program racing GTP_CMD_DELPDP against RTM_DELLINK: Oops: general protection fault, probably for non-canonical address KASAN: maybe wild-memory-acces