p PatchFirst

PatchFirst · Свежие уязвимости

Уязвимости linux-raspi · Страница 118

За последние 30 дней в linux-raspi опубликовано уязвимостей: 835; в каталоге KEV: 0.

RSS ↗ JSON ↗
Фильтры уязвимостей
Сбросить фильтры

Уязвимостей: 6345

  1. CVE-2026-89857

    Критический · CVSS 9.8EPSS 0,62%Нет опубликованного исправления

    scsi: qla2xxx: Hold qpair lock when sending NVMe LS reject

    In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Hold qpair lock when sending NVMe LS reject qla_nvme_ls_reject_iocb() allocates from and advances the request ring through __qla2x00_alloc_iocbs() (which assumes the hardware_lock is held) and qla2x00_start_iocbs() (which advances the ring and rings the request-in doorbell), but takes no lock itself. Two of its callers invoke it without the producer lock held: - qla_nvme_xmt_ls_rsp(), the NVMe-FC .xmt_ls_rsp transport callback, on its error path, and - qla2xxx_process_purls_pkt(), run from the purex work/DPC context. Both use ha->base_qpair, whose qp_

    linux-raspiОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  2. CVE-2026-89856

    Высокий · CVSS 8.4EPSS 0,18%Нет опубликованного исправления

    scsi: qla2xxx: Clamp MSI-X derived queue counts to avoid truncation

    In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Clamp MSI-X derived queue counts to avoid truncation ha->msix_count is u16, but ha->max_req_queues, ha->max_rsp_queues and ha->max_qpairs are u8. Deriving the queue count as "ha->max_req_queues = ha->msix_count - 1" therefore truncates: a board (or a misconfigured/malicious hot-plugged device) advertising 257 MSI-X vectors yields msix_count - 1 == 256, which truncates to 0. An MSI-X count of 1 zeroes it as well, and in target mode the subsequent "ha->max_req_queues--" then underflows 0 to 255. When the count is 0, qla2x00_alloc_queues() calls kzalloc_objs(st

    linux-raspiОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  3. CVE-2026-89855

    Без оценкиEPSS 0,22%Нет опубликованного исправления

    scsi: qla2xxx: Serialize flash version read in reset handler

    In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Serialize flash version read in reset handler The "update cache versions without reset" sysfs reset operation (0x20261) calls get_flash_version(), which reads hardware flash registers, without holding ha->optrom_mutex. The VPD update path serializes the same call under optrom_mutex, so this reset path can interleave its flash register accesses with a concurrent VPD or optrom flash operation and corrupt the reads. Hold ha->optrom_mutex across the get_flash_version() call to match the VPD update path.

    linux-raspiОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  4. CVE-2026-89854

    Высокий · CVSS 7.8EPSS 0,16%Нет опубликованного исправления

    scsi: qla2xxx: Fix cs84xx use-after-free on host teardown

    In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix cs84xx use-after-free on host teardown qla84xx_put_chip() drops the last reference to ha->cs84xx and frees it via __qla84xx_chip_release() without clearing ha->cs84xx. During teardown it ran before scsi_remove_host(), which is what removes the 84xx_fw_version host sysfs attribute. A concurrent read of that attribute in the window between the two calls executes qla24xx_84xx_fw_version_show(), which dereferences the freed ha->cs84xx, resulting in a use-after-free. Move qla84xx_put_chip() to after scsi_remove_host() in both qla2x00_remove_one() and qla2x00_

    linux-raspiОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  5. CVE-2026-89853

    Без оценкиEPSS 0,22%Нет опубликованного исправления

    scsi: qla2xxx: Fix FCE trace use-after-free during firmware dump

    In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix FCE trace use-after-free during firmware dump qla2x00_free_fce_trace() freed and cleared ha->fce while holding only fce_mutex. The firmware-dump consumers qla27xx_fwdt_entry_t264() and qla25xx_copy_fce() read ha->fce (NULL check followed by a copy of the buffer) under hardware_lock and never take fce_mutex. A debugfs FCE disable could therefore free the DMA buffer between a dump's NULL check and its copy, resulting in a use-after-free. Unpublish ha->fce under hardware_lock, then release the lock and free the DMA buffer (dma_free_coherent() may sleep). A

    linux-raspiОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  6. CVE-2026-89852

    Без оценкиEPSS 0,22%Нет опубликованного исправления

    scsi: qla2xxx: Zero mailbox struct in qla2x00_get_firmware_state()

    In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Zero mailbox struct in qla2x00_get_firmware_state() The mbx_cmd_t is allocated on the stack but left uninitialized. qla2x00_mailbox_command() has several early-return paths (PCI permanent failure, device failed, EEH busy, ISP abort pending, mailbox access timeout, purge mbox) that return without writing the input mailbox registers back into mcp->mb[]. qla2x00_get_firmware_state() then unconditionally copies mcp->mb[1..6] (and mb[12]) into the caller's states[] array regardless of the return value. On such a failure the copied values are uninitialized kernel

    linux-raspiОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  7. CVE-2026-89851

    Без оценкиEPSS 0,22%Нет опубликованного исправления

    scsi: qla2xxx: Fix FCE trace enable parsing in debugfs

    In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix FCE trace enable parsing in debugfs qla2x00_dfs_fce_write() called kstrtoul() with a NULL result pointer, so a successful parse would dereference NULL and oops. Worse, the int return value (0 on success, negative errno on failure) was assigned to the unsigned long enable flag, inverting the intended logic: a valid number was treated as "disable" while a parse failure enabled FCE. Parse the value into enable and propagate parse errors to userspace.

    linux-raspiОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  8. CVE-2026-89850

    Без оценкиEPSS 0,22%Нет опубликованного исправления

    scsi: qla2xxx: Don't query firmware state while chip is down

    In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Don't query firmware state while chip is down qla2x00_fw_state_show() initializes rval to QLA_FUNCTION_FAILED and jumps to the out: label when the chip is down or EEH is busy. The out: block then re-issued qla2x00_get_firmware_state() because rval != QLA_SUCCESS, defeating the chip-down/EEH-busy guards and issuing a mailbox command (outside optrom_mutex) during ISP reset or PCI error recovery, which can hang the adapter. It also turned a normal in-lock mailbox failure into a second unsynchronized mailbox attempt. Make the out: fallback only mark the firmware

    linux-raspiОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  9. CVE-2026-89849

    Высокий · CVSS 8.8EPSS 0,36%Нет опубликованного исправления

    scsi: qla2xxx: Reject non-SCSI SRB on status IOCB fast path

    In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Reject non-SCSI SRB on status IOCB fast path qla2x00_status_entry() filters out non-TYPE_SRB entries and the SRB_NVME_CMD, SRB_BIDI_CMD and SRB_TM_CMD types, then falls through to a SCSI fast path that assumes the command is an SRB_SCSI_CMD. The first thing on that path, qla_chk_edif_rx_sa_delete_pending(), and the subsequent handling both evaluate GET_CMD_SP(sp), i.e. sp->u.scmd.cmd. The srb u union overlays the SCSI command pointer with other command layouts (bsg_job, iocb_cmd). If firmware delivers an unexpected STATUS_TYPE IOCB for a non-SCSI handle, sp-

    linux-raspiОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  10. CVE-2026-89848

    Высокий · CVSS 8.1EPSS 0,59%Нет опубликованного исправления

    scsi: qla2xxx: Quiesce response IRQ before freeing request queue

    In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Quiesce response IRQ before freeing request queue qla2xxx_delete_qpair() deletes the request queue before the response queue. qla25xx_delete_req_que() frees the request queue memory (kfree(req) in qla25xx_free_req_que()), but the response-queue MSI-X is only released later, in qla25xx_free_rsp_que(). In that window the response interrupt can still fire, qla2xxx_msix_rsp_q() queues qpair->q_work, and qla_do_work() -> qla24xx_process_response_queue() dereferences the now-freed rsp->req (LOGINOUT/CT/ELS entries and the status path), a use-after-free. The cancel

    linux-raspiОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  11. CVE-2026-89847

    Критический · CVSS 9.8EPSS 0,69%Нет опубликованного исправления

    scsi: qla2xxx: Avoid double completion in async IOCB timeout

    In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Avoid double completion in async IOCB timeout qla2x00_async_iocb_timeout() tries to abort a timed-out async IOCB. When qla24xx_async_abort_cmd() fails, both the SRB_LOGIN_CMD path and the SRB_CTRL_VP/default path scan outstanding_cmds[] for the SRB and then call sp->done(sp, QLA_FUNCTION_TIMEOUT) unconditionally, without checking whether the SRB was actually found and removed. If the response ISR completes the same handle first, it removes the SRB under qp_lock_ptr and runs sp->done() -> complete(sp->comp). The submitter qla24xx_control_vp() wakes from wait_

    linux-raspiОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  12. CVE-2026-89846

    Критический · CVSS 9.1EPSS 0,71%Нет опубликованного исправления

    scsi: qla2xxx: Bound rsp_info_len to avoid OOB sense-data read

    In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Bound rsp_info_len to avoid OOB sense-data read In qla2x00_status_entry(), the FWI2 status path advances sense_data and shrinks par_sense_len by rsp_info_len: if (IS_FWI2_CAPABLE(ha)) { sense_data += rsp_info_len; par_sense_len -= rsp_info_len; } rsp_info_len is a 32-bit value taken directly from the target's FCP response (sf.rsp_data_len), while par_sense_len is the IOCB data area size (28 bytes for 24xx, 60 bytes for 29xx). A hostile or buggy target reporting an rsp_info_len larger than par_sense_len makes the unsigned subtraction underflow to a hug

    linux-raspiОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  13. CVE-2026-89845

    Без оценкиEPSS 0,22%Нет опубликованного исправления

    scsi: qla2xxx: Avoid req_q_map double-read in qla2x00_error_entry()

    In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Avoid req_q_map double-read in qla2x00_error_entry() qla2x00_error_entry() reads ha->req_q_map[que] twice: once for the NULL check and again when assigning it to req. The map slot is cleared by qla25xx_free_req_que() (ha->req_q_map[que_id] = NULL under mq_lock) during queue teardown, while the response-queue interrupt that drives qla2x00_error_entry() is still registered (the IRQ is released later in qla25xx_free_rsp_que()). If the slot is set to NULL between the two reads, req becomes NULL and is dereferenced. Read the slot once into req and NULL-check the

    linux-raspiОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  14. CVE-2026-89844

    Высокий · CVSS 8.8EPSS 0,34%Нет опубликованного исправления

    scsi: qla2xxx: Hold vport_slock for host map update in report ID acquisition

    In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Hold vport_slock for host map update in report ID acquisition qla24xx_report_id_acquisition() format-1 handling drops vport_slock after taking the vport reference and then calls qla_update_host_map() without the lock. That reaches qla_update_vp_map(), which mutates the ha->host_map btree via btree_insert32()/btree_update32()/btree_remove32() and is documented to require vport_slock to be held by the caller. Running it unlocked can race concurrent host_map updates and corrupt the btree. The format-2 path in the same function already wraps its host_map update

    linux-raspiОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  15. CVE-2026-89843

    Без оценкиEPSS 0,22%Нет опубликованного исправления

    scsi: qla2xxx: Zero-init bsg stack buffers to avoid info leak

    In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Zero-init bsg stack buffers to avoid info leak Several bsg handlers stage their request/reply in an uninitialized 256-byte on-stack buffer (uint8_t bsg[DMA_POOL_SIZE]) and fill it via sg_copy_to_buffer(), which only copies as many bytes as the user-supplied request payload. When the request is shorter than the structure, the remainder of the buffer is left holding stale stack data. qla2x00_read_fru_status() and qla2x00_read_i2c() then copy the full structure back to the reply payload with sg_copy_from_buffer(), leaking the uninitialized stack bytes to user s

    linux-raspiОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  16. CVE-2026-89842

    Без оценкиEPSS 0,21%Нет опубликованного исправления

    scsi: qla2xxx: Skip NVMe LS reject IOCB when FW not started

    In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Skip NVMe LS reject IOCB when FW not started qla_nvme_xmt_ls_rsp() bails out to the out: label when firmware is not started (!ha->flags.fw_started), but the out: path unconditionally calls qla_nvme_ls_reject_iocb(), which ends in qla2x00_start_iocbs() and an unconditional doorbell write to the request queue in-pointer register. This rings the firmware doorbell and queues an IOCB that stopped or resetting firmware cannot consume, and touches MMIO during the reset/EEH window where fw_started is also clear. Only emit the LS reject IOCB (and ring the doorbell) w

    linux-raspiОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  17. CVE-2026-89841

    Высокий · CVSS 7.8EPSS 0,17%Нет опубликованного исправления

    f2fs: only redirty pinned folios in redirty_blocks

    In the Linux kernel, the following vulnerability has been resolved: f2fs: only redirty pinned folios in redirty_blocks redirty_blocks() pins folios with read_cache_folio() and then walks the same range again with filemap_lock_folio() to redirty them and drop the references it took. Commit 5951fee46bef ("f2fs: Use a folio in redirty_blocks()") changed the second pass to a do/while loop. If read_cache_folio() fails before anything is pinned, page_idx does not advance but the cleanup loop still runs once. If readahead has already populated the failed folio in page cache, that extra iteration finds it and folio_put_refs(folio, 2) drops one re

    linux-raspiОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  18. CVE-2026-89840

    Высокий · CVSS 7.1EPSS 0,17%Нет опубликованного исправления

    f2fs: validate MOVE_RANGE destination size

    In the Linux kernel, the following vulnerability has been resolved: f2fs: validate MOVE_RANGE destination size F2FS_IOC_MOVE_RANGE checks the source range, but not the destination end before updating i_size. A source hole can expose this: __clone_blkaddrs() skips NULL_ADDR entries and returns success, so the caller can still extend the destination inode with unchecked pos_out + len. Reject destination overflow and use inode_newsize_ok() before extending the destination inode.

    linux-raspiОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  19. CVE-2026-89839

    Без оценкиEPSS 0,2%Нет опубликованного исправления

    f2fs: use the mount idmap for the owner check in f2fs_xattr_advise_set()

    In the Linux kernel, the following vulnerability has been resolved: f2fs: use the mount idmap for the owner check in f2fs_xattr_advise_set() f2fs_xattr_advise_set() calls inode_owner_or_capable() with &nop_mnt_idmap before allowing the "system.advise" xattr to be set, instead of the idmap that the VFS passes to the ->set() handler. f2fs supports idmapped mounts, so on such a mount this checks the caller's fsuid against the unmapped on-disk owner rather than the mapped owner: the actual owner can be wrongly denied with -EPERM and an unrelated caller wrongly allowed. Pass the handler's idmap instead.

    linux-raspiОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  20. CVE-2026-89838

    Высокий · CVSS 7.1EPSS 0,17%Нет опубликованного исправления

    f2fs: limit recovery filename logging to stored length

    In the Linux kernel, the following vulnerability has been resolved: f2fs: limit recovery filename logging to stored length F2FS stores recovery filenames as a length plus a fixed-size i_name buffer. The buffer is not NUL-terminated, but recover_inode() and recover_dentry() print it with %s. For a 255-byte filename, recovery logging can read past i_name into the following raw inode fields. Print the name with a precision bounded by i_namelen and F2FS_NAME_LEN.

    linux-raspiОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

Проверьте свой сервер

Сопоставьте установленный стек и версии со свежими базами уязвимостей.

Проверьте свой сервер →