p PatchFirst

PatchFirst · Свежие уязвимости

Уязвимости linux-raspi · Страница 91

За последние 30 дней в linux-raspi опубликовано уязвимостей: 837; в каталоге KEV: 0.

RSS ↗ JSON ↗
Фильтры уязвимостей
Сбросить фильтры

Уязвимостей: 6345

  1. CVE-2026-92481

    Без оценкиEPSS 0,21%Нет опубликованного исправления

    pinctrl: mediatek: free EINT resources on unbind

    In the Linux kernel, the following vulnerability has been resolved: pinctrl: mediatek: free EINT resources on unbind mtk_eint_do_init() creates an IRQ domain, populates it with a mapping for every EINT line and installs a chained handler on the parent interrupt, but none of these are ever released. This was harmless while the drivers were built-in, but now that they can be built as modules and unbound/rmmod'd it leaves behind a dangling IRQ domain, interrupt mappings whose chip data points at freed memory, and a chained handler that keeps firing into that freed data. The plain allocations in mtk_eint_do_init() already use the device-manage

    linux-raspiОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  2. CVE-2026-92480

    Средний · CVSS 4.8EPSS 0,21%Нет опубликованного исправления

    scsi: ufs: core: Validate string descriptors

    In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Validate string descriptors The string descriptor length includes a two-byte header while the UTF-16 payload starts after it. utf16s_to_utf8s() expects a count of UTF-16 code units, not bytes. Passing the payload byte count can make it read beyond the descriptor buffer. Validate that the payload has an even byte count, pass a code-unit count to the converter, and allocate sufficient UTF-8 output space. The raw string buffer starts after the descriptor header but its size is bLength. Copying bLength bytes from that pointer can read beyond the response buff

    linux-raspiОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  3. CVE-2026-92479

    Без оценкиEPSS 0,2%Нет опубликованного исправления

    scsi: ufs: Avoid NULL CQE dereference when reporting invalid tags

    In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: Avoid NULL CQE dereference when reporting invalid tags The single-doorbell completion path can call ufshcd_compl_one_cqe() with a NULL CQE. If no command is associated with the completion tag, the warning message dereferences the CQE while reporting the error. Avoid that dereference and include the invalid tag in the warning.

    linux-raspiОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  4. CVE-2026-92477

    Без оценкиEPSS 0,17%Нет опубликованного исправления

    scsi: ufs: debugfs: Reserve space for a string terminator

    In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: debugfs: Reserve space for a string terminator ufs_saved_err_write() copies user input into a zero-initialized stack buffer and passes it to kstrtoint(). A write that fills the entire buffer overwrites its only terminator. Reject an input whose length leaves no room for the trailing NUL.

    linux-raspiОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  5. CVE-2026-92476

    Без оценкиEPSS 0,21%Нет опубликованного исправления

    crypto: keembay - Initialize completion before requesting IRQ

    In the Linux kernel, the following vulnerability has been resolved: crypto: keembay - Initialize completion before requesting IRQ kmb_ocs_aes_probe() requests the device IRQ before initializing irq_completion. Once the handler is registered it can run immediately, and ocs_aes_irq_handler() unconditionally calls complete(). An interrupt in this window would therefore use an uninitialized completion. Initialize the completion before requesting the IRQ, as the sibling OCS HCU and ECC drivers already do.

    linux-raspiОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  6. CVE-2026-90435

    Высокий · CVSS 7.8EPSS 0,13%Нет опубликованного исправления

    RDMA/mlx5: Fix integer overflow of user QP buffer size

    In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix integer overflow of user QP buffer size set_user_buf_size() computes the QP buffer size by left-shifting the user-supplied rq.wqe_cnt and rq.wqe_shift values as signed integers. A sufficiently large rq.wqe_cnt causes signed integer overflow, which is undefined behavior, and yields a small or negative buf_size, causing ib_umem_get() to map a buffer smaller than the hardware will actually write into. Replace the shifts and addition with check_shl_overflow() and check_add_overflow(), rejecting invalid user inputs. Moreover, guard the identical shift computing

    linux-raspiОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  7. CVE-2026-90434

    Без оценкиEPSS 0,22%Нет опубликованного исправления

    isofs: release zisofs block pointer buffer head

    In the Linux kernel, the following vulnerability has been resolved: isofs: release zisofs block pointer buffer head zisofs_fill_pages() reads the compressed block pointer table. The error paths release the current buffer_head, the loop also releases the old buffer_head when it advances. However, the success path leaves the last buffer_head referenced. Release it before returning success.

    linux-raspiОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  8. CVE-2026-90433

    Без оценкиEPSS 0,21%Нет опубликованного исправления

    spi: oc-tiny: switch to managed controller allocation

    In the Linux kernel, the following vulnerability has been resolved: spi: oc-tiny: switch to managed controller allocation The controller is allocated with the non-managed spi_alloc_host() while the interrupt is registered with devm_request_irq(). During removal, spi_bitbang_stop() only unregisters the controller; the subsequent spi_controller_put() then frees the controller together with its embedded driver-private devdata, which is the IRQ handler's dev_id. The devm_request_irq() release action (free_irq()), which drains the handler, does not run until after .remove() returns. A late or latched interrupt can therefore reach tiny_spi_irq

    linux-raspiОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  9. CVE-2026-90431

    Без оценкиEPSS 0,22%Нет опубликованного исправления

    remoteproc: Prevent crash handling to race with rproc_del()

    In the Linux kernel, the following vulnerability has been resolved: remoteproc: Prevent crash handling to race with rproc_del() There's no synchronization between rproc_crash_handler_work() and rproc_del(), as such it's possible for a driver to be removed while crash-handler work is scheduled, or even executing - resulting in use-after-free issues. To avoid this the scheduled work need to be cancelled and synchronized against before the removal proceeds. In order to ensure that this doesn't race with the reporting, and thereby scheduling new work, a "deleting" flag is introduced. This is similar to the RPROC_DELETE state that was introduc

    linux-raspiОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  10. CVE-2026-90430

    Без оценкиEPSS 0,2%Нет опубликованного исправления

    iommu/tegra241-cmdqv: Publish an LVCMDQ only after it is fully initialized

    In the Linux kernel, the following vulnerability has been resolved: iommu/tegra241-cmdqv: Publish an LVCMDQ only after it is fully initialized tegra241_vintf_init_lvcmdq() stores the freshly allocated vcmdq pointer to the vintf->lvcmdqs[] array, before tegra241_vcmdq_alloc_smmu_cmdq() builds the vcmdq->cmdq. The error ISR dereferences that cmdq, so a latched LVCMDQ error (e.g. one inherited across a kexec) firing in this window would make tegra241_vintf0_handle_error() pass the still-zeroed arm_smmu_cmdq down to __arm_smmu_cmdq_skip_err(), dereferencing NULL queue register pointers. Drop the store from tegra241_vintf_init_lvcmdq() and publ

    linux-raspiОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  11. CVE-2026-90429

    Высокий · CVSS 7.8EPSS 0,16%Нет опубликованного исправления

    iommu/tegra241-cmdqv: Synchronize the error ISR against VINTF (de)init

    In the Linux kernel, the following vulnerability has been resolved: iommu/tegra241-cmdqv: Synchronize the error ISR against VINTF (de)init A user VINTF is torn down by tegra241_cmdqv_deinit_vintf(), which runs from the destroy callback and from the init-failure unwind in the alloc handler. It clears the cmdqv->vintfs[] slot and lets the iommufd core free it, but nothing serializes that against the error interrupt: tegra241_cmdqv_isr() reads cmdqv->vintfs[idx] and dereferences the vintf. A concurrent error can make the ISR read a slot mid-clear (a NULL deref) or use a vintf which is about to be freed (a use-after-free). deinit_vintf() also

    linux-raspiОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  12. CVE-2026-90428

    Без оценкиEPSS 0,17%Нет опубликованного исправления

    iommu/tegra241-cmdqv: Don't run the error ISR before probe sets up vintfs

    In the Linux kernel, the following vulnerability has been resolved: iommu/tegra241-cmdqv: Don't run the error ISR before probe sets up vintfs __tegra241_cmdqv_probe() requests the error IRQ before it has allocated the cmdqv->vintfs array and set cmdqv->num_vintfs. A CMDQV left enabled with a latched error across a kexec fires the IRQ as soon as it is requested, and tegra241_cmdqv_isr() then walks the uninitialized cmdqv->vintfs array. Request the IRQ only after cmdqv->vintfs is allocated and zeroed, so that a latched interrupt firing early runs the ISR against a valid array of NULL slots that it safely skips.

    linux-raspiОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  13. CVE-2026-90427

    Высокий · CVSS 7.4EPSS 0,17%Нет опубликованного исправления

    iommu/tegra241-cmdqv: Don't fall back to a freed smmu after devm_krealloc()

    In the Linux kernel, the following vulnerability has been resolved: iommu/tegra241-cmdqv: Don't fall back to a freed smmu after devm_krealloc() __tegra241_cmdqv_probe() uses devm_krealloc() to grow @smmu into the larger tegra241_cmdqv, which frees the original @smmu once it relocates. A failure after that returned NULL, and the caller then dereferenced the freed @smmu on its fallback path. Return an int and take @smmu by reference instead, then update *smmu to the reallocated pointer after devm_krealloc() succeeds, so the caller and its fallback path both use the live @smmu rather than the freed original.

    linux-raspiОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  14. CVE-2026-90426

    Без оценкиEPSS 0,2%Нет опубликованного исправления

    iommu/tegra241-cmdqv: Free the error IRQ before tearing down VINTFs

    In the Linux kernel, the following vulnerability has been resolved: iommu/tegra241-cmdqv: Free the error IRQ before tearing down VINTFs tegra241_cmdqv_remove() tears each VINTF down first, then calls free_irq(). Tearing a VINTF down frees vintf0 and clears cmdqv->vintfs[0]. An error in that window makes tegra241_cmdqv_isr() read the stale slot and hand it to tegra241_vintf0_handle_error(), which dereferences a NULL or freed pointer. Free the IRQ before tearing the VINTFs down. free_irq() waits for in-flight handlers to finish and blocks new ones, so no ISR can observe a VINTF as it is torn down. Note: a user-owned VINTF (viommu) could out

    linux-raspiОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  15. CVE-2026-90425

    Высокий · CVSS 8.8EPSS 0,17%Нет опубликованного исправления

    iommu/tegra241-cmdqv: Require exactly one Stream ID for a vSID

    In the Linux kernel, the following vulnerability has been resolved: iommu/tegra241-cmdqv: Require exactly one Stream ID for a vSID tegra241_vintf_init_vsid() maps a guest vSID to a single physical Stream ID taken from master->streams[0], and only warns when the device does not have exactly one stream. A device with several streams gets only its first one mapped, so a guest vSID invalidation cannot reach the others' ATC and IOTLB entries; a device with none makes master->streams a ZERO_SIZE_PTR, read out of bounds. Reject the mapping with -EOPNOTSUPP if master->num_streams is not one.

    linux-raspiОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  16. CVE-2026-90424

    Без оценкиEPSS 0,17%Нет опубликованного исправления

    iommu/tegra241-cmdqv: Fix VINTF0 leak on the init-failure path

    In the Linux kernel, the following vulnerability has been resolved: iommu/tegra241-cmdqv: Fix VINTF0 leak on the init-failure path tegra241_cmdqv_init_structures() allocates VINTF0 with kzalloc_obj(), inits it, and preallocates its logical VCMDQs. Two of its error paths leak. When tegra241_cmdqv_init_vintf() fails it returns before VINTF0 reaches the cmdqv->vintfs[] array, so the devres unwind on probe failure cannot reach it; free it directly there. A later VCMDQ preallocation failure instead leaves VINTF0 published, and so this time the unwind does reach tegra241_cmdqv_remove_vintf(), which then frees it from vintf->hyp_own. But tegra24

    linux-raspiОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  17. CVE-2026-90423

    Высокий · CVSS 7.8EPSS 0,17%Нет опубликованного исправления

    RDMA/rxe: Fix UAF in ODP init error-handling path

    In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix UAF in ODP init error-handling path rxe_odp_mr_init_user() stores &umem_odp->umem in mr->umem before calling rxe_odp_init_pages(). If rxe_odp_init_pages() fails, rxe_odp_mr_init_user() releases umem_odp and returns an error. rxe_reg_user_mr() then unwinds the error through rxe_cleanup(), rxe_mr_cleanup(), ib_umem_release(mr->umem). There is an IS_ERR_OR_NULL(umem) check at the start of ib_umem_release(). But since mr->umem is NOT reset to NULL in the error handling path of rxe_odp_mr_init_user(), the check passes and it reads already-freed fields like umem->i

    linux-raspiОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  18. CVE-2026-90422

    Без оценкиEPSS 0,21%Нет опубликованного исправления

    clk: mediatek: pllfh: Fix IO remapping leak in register_pllfhs error path

    In the Linux kernel, the following vulnerability has been resolved: clk: mediatek: pllfh: Fix IO remapping leak in register_pllfhs error path When mtk_clk_register_pllfhs function fails to register a PLL, it unregisters all PLLs and cleans up itself in its error path before returning, so the function callers don't need to do it. But contrary to mtk_clk_unregister_pllfhs function, that does almost the same sequence, it does not free the IO memory mapped on fhctl node, leading to a leak. Fix this leak by factorizing the cleanup sequence in a new private function and use it both mtk_clk_register_pllfhs and mtk_clk_unregister_pllfhs functions

    linux-raspiОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  19. CVE-2026-90421

    Без оценкиEPSS 0,21%Нет опубликованного исправления

    PCI: Fix UAF when probe runs concurrent to dyn ID removal

    In the Linux kernel, the following vulnerability has been resolved: PCI: Fix UAF when probe runs concurrent to dyn ID removal Dynamic IDs are only guaranteed to be valid when dynids.lock is held, as remove_id_store() can free the node. Thus, make a copy in pci_match_device(). Also, clarify that the id parameter is only valid during probe.

    linux-raspiОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  20. CVE-2026-90420

    Без оценкиEPSS 0,22%Нет опубликованного исправления

    nilfs2: fix infinite loop in nilfs_clean_segments()

    In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix infinite loop in nilfs_clean_segments() syzbot reported a hung task in nilfs_transaction_begin(). This occurs because the cleaner ioctl falls into an infinite loop if nilfs_segctor_construct() repeatedly returns -EROFS (e.g. the device is remounted as read-only after an I/O error). Currently in nilfs_clean_segments(), if err is non-zero, it logs the error and sleeps but doesn't abort when it encounters a terminal error like -EROFS. This causes the thread to loop forever. Fix this by breaking out of the loop if nilfs_segctor_construct() returns -EROFS. This mat

    linux-raspiОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

Проверьте свой сервер

Сопоставьте установленный стек и версии со свежими базами уязвимостей.

Проверьте свой сервер →