p PatchFirst

PatchFirst · Свежие уязвимости

Уязвимости util-linux

За последние 30 дней в util-linux опубликовано уязвимостей: 4; в каталоге KEV: 0.

RSS ↗
Фильтры уязвимостей
Сбросить фильтры

Уязвимостей: 11

  1. CVE-2026-53615

    Высокий · CVSS 8EPSS 0,18%Нет опубликованного исправления

    util-linux libblkid DOS extended-partition overflow produces invalid partition metadata

    util-linux is a random collection of Linux utilities. Before util-linux 2.41.4, `parse_dos_extended()` in `libblkid/src/partitions/dos.c` computes an extended-partition start sector with 32-bit addition and does not apply the extended-area bounds checks to the first two EBR entries. A local attacker who causes a crafted DOS extended-partition disk image or removable medium to be probed can wrap `cur_start + start` to sector zero and cause libblkid to report a false partition overlapping the MBR. This directly compromises the integrity of the reported partition metadata; disk modification or availability loss requires a separate downstream con

    util-linuxОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  2. CVE-2026-53614

    Высокий · CVSS 7EPSS 0,14%Нет опубликованного исправления

    util-linux LIBMOUNT_FORCE_MOUNT2 allows nosuid and noexec bypass

    util-linux is a random collection of Linux utilities. In util-linux 2.39.1 through 2.41.4 and 2.42 through 2.42.1, the SUID `mount` utility reads the attacker-controlled `LIBMOUNT_FORCE_MOUNT2` environment variable with `getenv()`, allowing a local low-privileged user to force the non-atomic legacy bind-mount path. With an `/etc/fstab` bind mount authorized by `user` or `users` and protected by `nosuid`, `noexec`, or `nodev`, an attacker can race the window between the initial bind mount and the remount that applies those security flags and execute a SUID program from the temporarily unprotected mount, potentially gaining root privileges. Thi

    util-linuxОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  3. CVE-2026-53613

    Высокий · CVSS 7EPSS 0,13%Нет опубликованного исправления

    util-linux mount target TOCTOU allows local privilege escalation

    util-linux is a random collection of Linux utilities. In util-linux 2.17 through 2.41.6 and 2.42 through 2.42.3, and in 2.42.4 when the legacy `mount(2)` path is used without `/proc`, restricted non-root `mount` requests validate an `/etc/fstab` target before the mount operation re-resolves that pathname. A local low-privileged user authorized by an fstab `user` or `users` entry whose target has an attacker-writable ancestor can use `renameat2(RENAME_EXCHANGE)` to swap a path component and redirect an authorized mount to a root-owned location, such as mounting attacker-controlled content over `/etc/sudoers.d`, and thereby gain root privileges

    util-linuxОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  4. CVE-2026-53612

    Высокий · CVSS 7EPSS 0,11%Нет опубликованного исправления

    util-linux mount hook_owner TOCTOU allows local privilege escalation

    util-linux is a random collection of Linux utilities. In util-linux 2.39 through 2.41.4 and 2.42 through 2.42.1, the SUID `mount` utility's `hook_owner.c` post-mount hook performs path-based `chmod()` and `lchown()` operations on a previously validated mount target. A local low-privileged user authorized by an `/etc/fstab` entry with `user` or `users` and an `X-mount.mode`, `X-mount.owner`, or `X-mount.group` option can use `renameat2(RENAME_EXCHANGE)` to race a writable ancestor of the target and redirect the privileged ownership or mode change to a root-owned path, potentially gaining root privileges. This issue is fixed in 2.41.5 and 2.42.

    util-linuxОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  5. CVE-2026-76642

    Высокий · CVSS 8.5EPSS 0,22%Нет опубликованного исправления

    util-linux libmount Privilege Escalation via Failed Mount Helper

    util-linux versions through 2.41.5 and 2.42.2 fail to check mount helper exit status before running post-mount hooks, allowing unprivileged users to execute privileged operations on pre-existing filesystems. Attackers can exploit X-mount.idmap or X-mount.owner hooks to clone filesystems with inherited suid bits or modify target inode permissions after a helper fails, achieving privilege escalation.

    util-linuxОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  6. CVE-2026-78409

    Высокий · CVSS 7EPSS 0,19%Нет опубликованного исправления

    Util-linux: util-linux: x-mount.subdir detached-tree resolution can escape via intermediate symlinks

    The X-mount.subdir option uses a detached-tree fast path on Linux 6.15 and later and passes the configured subdirectory to open_tree() with AT_SYMLINK_NOFOLLOW. That flag does not stop intermediate symlink traversal or keep resolution inside the newly mounted filesystem. A local unprivileged user with an fstab-authorized X-mount.subdir entry can attach a host path at the intended mountpoint.

    util-linuxОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  7. CVE-2026-78410

    Высокий · CVSS 7.8EPSS 0,16%Нет опубликованного исправления

    Util-linux: util-linux: restricted bind mounts do not pin the source, allowing x-mount.owner/group/mode redirection

    A flaw was found in util-linux. Restricted bind mounts take the source path from fstab but do not pin that source before the privileged mount. A local unprivileged user who can replace the authorized source or a writable ancestor can redirect SUID mount(8) to bind another host directory. If the fstab entry also sets X-mount.owner, X-mount.group, or X-mount.mode, root then changes ownership or mode on that redirected inode.

    util-linuxОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  8. CVE-2026-78408

    Высокий · CVSS 7.9EPSS 0,19%Нет опубликованного исправления

    Util-linux: util-linux: nsenter --join-cgroup leaks root cgroup migration authority

    The nsenter --join-cgroup option opens the target cgroup.procs file as root and leaves that file descriptor open across later namespace and credential changes and across execve(). Because the kernel checks later cgroup migrations using the credentials from the original open, a program run in an attacker-controlled target can inherit root's ability to move host processes between cgroups. After a privileged operator uses --join-cgroup against that target, an unprivileged user can migrate and terminate unrelated root processes.

    util-linuxОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  9. CVE-2026-13595

    Средний · CVSS 6.8EPSS 0,17%Нет опубликованного исправления

    Util-linux: util-linux: heap use-after-free in libblkid nested partition probing

    A flaw was found in the libblkid library of util-linux. During nested partition probing, the BSD, Minix, Solaris x86, and UnixWare partition probers cache a raw pointer to a parent partition entry in a dynamically allocated array. When subsequent partition additions cause the array to be reallocated, this pointer becomes stale, leading to a heap use-after-free read. An attacker who can present a crafted block device image (for example, via USB insertion or a loop-mounted disk image) can trigger this flaw without user interaction, as libblkid is invoked automatically by udev/udisks as root on block-device hot-plug events. This could lead to li

    util-linuxОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  10. CVE-2026-27456

    Средний · CVSS 4.7EPSS 0,12%Нет опубликованного исправления

    util-linux: TOCTOU Race Condition in util-linux mount(8) - Loop Device Setup

    util-linux is a random collection of Linux utilities. Prior to version 2.41.4, a TOCTOU (Time-of-Check-Time-of-Use) vulnerability has been identified in the SUID binary /usr/bin/mount from util-linux. The mount binary, when setting up loop devices, validates the source file path with user privileges via fork() + setuid() + realpath(), but subsequently re-canonicalizes and opens it with root privileges (euid=0) without verifying that the path has not been replaced between both operations. Neither O_NOFOLLOW, nor inode comparison, nor post-open fstat() are employed. This allows a local unprivileged user to replace the source file with a symlink

    util-linuxОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  11. CVE-2026-3184

    Низкий · CVSS 3.7EPSS 0,44%Нет опубликованного исправления

    Util-linux: util-linux: access control bypass due to improper hostname canonicalization

    A flaw was found in util-linux. Improper hostname canonicalization in the `login(1)` utility, when invoked with the `-h` option, can modify the supplied remote hostname before setting `PAM_RHOST`. A remote attacker could exploit this by providing a specially crafted hostname, potentially bypassing host-based Pluggable Authentication Modules (PAM) access control rules that rely on fully qualified domain names. This could lead to unauthorized access.

    util-linuxОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

Проверьте свой сервер

Сопоставьте установленный стек и версии со свежими базами уязвимостей.

Проверьте свой сервер →