Уязвимости linux-lts-xenial · Страница 177

powerpc/tm: Fix more userspace r13 corruption

In the Linux kernel, the following vulnerability has been resolved: powerpc/tm: Fix more userspace r13 corruption Commit cf13435b730a ("powerpc/tm: Fix userspace r13 corruption") fixes a problem in treclaim where a SLB miss can occur on the thread_struct->ckpt_regs while SCRATCH0 is live with the saved user r13 value, clobbering it with the kernel r13 and ultimately resulting in kernel r13 being stored in ckpt_regs. There is an equivalent problem in trechkpt where the user r13 value is loaded into r13 from chkpt_regs to be recheckpointed, but a SLB miss could occur on ckpt_regs accesses after that, which will result in r13 being clobbered

video: fbdev: sm712fb: Fix crash in smtcfb_write()

In the Linux kernel, the following vulnerability has been resolved: video: fbdev: sm712fb: Fix crash in smtcfb_write() When the sm712fb driver writes three bytes to the framebuffer, the driver will crash: BUG: unable to handle page fault for address: ffffc90001ffffff RIP: 0010:smtcfb_write+0x454/0x5b0 Call Trace: vfs_write+0x291/0xd60 ? do_sys_openat2+0x27d/0x350 ? __fget_light+0x54/0x340 ksys_write+0xce/0x190 do_syscall_64+0x43/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae Fix it by removing the open-coded endianness fixup-code.

scsi: qla2xxx: Implement ref count for SRB

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Implement ref count for SRB The timeout handler and the done function are racing. When qla2x00_async_iocb_timeout() starts to run it can be preempted by the normal response path (via the firmware?). qla24xx_async_gpsc_sp_done() releases the SRB unconditionally. When scheduling back to qla2x00_async_iocb_timeout() qla24xx_async_abort_cmd() will access an freed sp->qpair pointer: qla2xxx [0000:83:00.0]-2871:0: Async-gpsc timeout - hdl=63d portid=234500 50:06:0e:80:08:77:b6:21. qla2xxx [0000:83:00.0]-2853:0: Async done-gpsc res 0, WWPN 50:06:0e:80:08:77:b6:

scsi: qla2xxx: Fix premature hw access after PCI error

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix premature hw access after PCI error After a recoverable PCI error has been detected and recovered, qla driver needs to check to see if the error condition still persist and/or wait for the OS to give the resume signal. Sep 8 22:26:03 localhost kernel: WARNING: CPU: 9 PID: 124606 at qla_tmpl.c:440 qla27xx_fwdt_entry_t266+0x55/0x60 [qla2xxx] Sep 8 22:26:03 localhost kernel: RIP: 0010:qla27xx_fwdt_entry_t266+0x55/0x60 [qla2xxx] Sep 8 22:26:03 localhost kernel: Call Trace: Sep 8 22:26:03 localhost kernel: ? qla27xx_walk_template+0xb1/0x1b0 [qla2xxx] Sep

ACPI: CPPC: Avoid out of bounds access when parsing _CPC data

In the Linux kernel, the following vulnerability has been resolved: ACPI: CPPC: Avoid out of bounds access when parsing _CPC data If the NumEntries field in the _CPC return package is less than 2, do not attempt to access the "Revision" element of that package, because it may not be present then. BugLink: https://lore.kernel.org/lkml/20220322143534.GC32582@xsang-OptiPlex-9020/

net: preserve skb_end_offset() in skb_unclone_keeptruesize()

In the Linux kernel, the following vulnerability has been resolved: net: preserve skb_end_offset() in skb_unclone_keeptruesize() syzbot found another way to trigger the infamous WARN_ON_ONCE(delta < len) in skb_try_coalesce() [1] I was able to root cause the issue to kfence. When kfence is in action, the following assertion is no longer true: int size = xxxx; void *ptr1 = kmalloc(size, gfp); void *ptr2 = kmalloc(size, gfp); if (ptr1 && ptr2) ASSERT(ksize(ptr1) == ksize(ptr2)); We attempted to fix these issues in the blamed commits, but forgot that TCP was possibly shifting data after skb_unclone_keeptruesize() has been used, notably f

Bluetooth: fix null ptr deref on hci_sync_conn_complete_evt

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: fix null ptr deref on hci_sync_conn_complete_evt This event is just specified for SCO and eSCO link types. On the reception of a HCI_Synchronous_Connection_Complete for a BDADDR of an existing LE connection, LE link type and a status that triggers the second case of the packet processing a NULL pointer dereference happens, as conn->link is NULL.

Bluetooth: hci_event: Ignore multiple conn complete events

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_event: Ignore multiple conn complete events When one of the three connection complete events is received multiple times for the same handle, the device is registered multiple times which leads to memory corruptions. Therefore, consequent events for a single connection are ignored. The conn->state can hold different values, therefore HCI_CONN_HANDLE_UNSET is introduced to identify new connections. To make sure the events do not contain this or another invalid handle HCI_CONN_HANDLE_MAX and checks are introduced. Buglink: https://bugzilla.kernel.org/show_bug.

x86/mce: Work around an erratum on fast string copy instructions

In the Linux kernel, the following vulnerability has been resolved: x86/mce: Work around an erratum on fast string copy instructions A rare kernel panic scenario can happen when the following conditions are met due to an erratum on fast string copy instructions: 1) An uncorrected error. 2) That error must be in first cache line of a page. 3) Kernel must execute page_copy from the page immediately before that page. The fast string copy instructions ("REP; MOVS*") could consume an uncorrectable memory error in the cache line _right after_ the desired region to copy and raise an MCE. Bit 0 of MSR_IA32_MISC_ENABLE can be cleared to disable f

dm ioctl: prevent potential spectre v1 gadget

In the Linux kernel, the following vulnerability has been resolved: dm ioctl: prevent potential spectre v1 gadget It appears like cmd could be a Spectre v1 gadget as it's supplied by a user and used as an array index. Prevent the contents of kernel memory from being leaked to userspace via speculative execution by using array_index_nospec.

scsi: pm8001: Fix tag leaks on error

In the Linux kernel, the following vulnerability has been resolved: scsi: pm8001: Fix tag leaks on error In pm8001_chip_set_dev_state_req(), pm8001_chip_fw_flash_update_req(), pm80xx_chip_phy_ctl_req() and pm8001_chip_reg_dev_req() add missing calls to pm8001_tag_free() to free the allocated tag when pm8001_mpi_build_cmd() fails. Similarly, in pm8001_exec_internal_task_abort(), if the chip ->task_abort method fails, the tag allocated for the abort request task must be freed. Add the missing call to pm8001_tag_free().

scsi: pm8001: Fix task leak in pm8001_send_abort_all()

In the Linux kernel, the following vulnerability has been resolved: scsi: pm8001: Fix task leak in pm8001_send_abort_all() In pm8001_send_abort_all(), make sure to free the allocated sas task if pm8001_tag_alloc() or pm8001_mpi_build_cmd() fail.

scsi: pm8001: Fix memory leak in pm8001_chip_fw_flash_update_req()

In the Linux kernel, the following vulnerability has been resolved: scsi: pm8001: Fix memory leak in pm8001_chip_fw_flash_update_req() In pm8001_chip_fw_flash_update_build(), if pm8001_chip_fw_flash_update_build() fails, the struct fw_control_ex allocated must be freed.

mips: ralink: fix a refcount leak in ill_acc_of_setup()

In the Linux kernel, the following vulnerability has been resolved: mips: ralink: fix a refcount leak in ill_acc_of_setup() of_node_put(np) needs to be called when pdev == NULL.

scsi: libfc: Fix use after free in fc_exch_abts_resp()

In the Linux kernel, the following vulnerability has been resolved: scsi: libfc: Fix use after free in fc_exch_abts_resp() fc_exch_release(ep) will decrease the ep's reference count. When the reference count reaches zero, it is freed. But ep is still used in the following code, which will lead to a use after free. Return after the fc_exch_release() call to avoid use after free.

• Обновитесь до 4.4.0-289.323~14.04.1

Bluetooth: Fix use after free in hci_send_acl

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Fix use after free in hci_send_acl This fixes the following trace caused by receiving HCI_EV_DISCONN_PHY_LINK_COMPLETE which does call hci_conn_del without first checking if conn->type is in fact AMP_LINK and in case it is do properly cleanup upper layers with hci_disconn_cfm: ================================================================== BUG: KASAN: use-after-free in hci_send_acl+0xaba/0xc50 Read of size 8 at addr ffff88800e404818 by task bluetoothd/142 CPU: 0 PID: 142 Comm: bluetoothd Not tainted 5.17.0-rc5-00006-gda4022eeac1a #7 Hard

• Обновитесь до 4.4.0-289.323~14.04.1

ceph: fix memory leak in ceph_readdir when note_last_dentry returns error

In the Linux kernel, the following vulnerability has been resolved: ceph: fix memory leak in ceph_readdir when note_last_dentry returns error Reset the last_readdir at the same time, and add a comment explaining why we don't free last_readdir when dir_emit returns false.

virtio_console: eliminate anonymous module_init & module_exit

In the Linux kernel, the following vulnerability has been resolved: virtio_console: eliminate anonymous module_init & module_exit Eliminate anonymous module_init() and module_exit(), which can lead to confusion or ambiguity when reading System.map, crashes/oops/bugs, or an initcall_debug log. Give each of these init and exit functions unique driver-specific names to eliminate the anonymous names. Example 1: (System.map) ffffffff832fc78c t init ffffffff832fc79e t init ffffffff832fc8f8 t init Example 2: (initcall_debug log) calling init+0x0/0x12 @ 1 initcall init+0x0/0x12 returned 0 after 15 usecs calling init+0x0/0x60 @ 1 initcal

scsi: zorro7xx: Fix a resource leak in zorro7xx_remove_one()

In the Linux kernel, the following vulnerability has been resolved: scsi: zorro7xx: Fix a resource leak in zorro7xx_remove_one() The error handling path of the probe releases a resource that is not freed in the remove function. In some cases, a ioremap() must be undone. Add the missing iounmap() call in the remove function.

net: openvswitch: fix leak of nested actions

In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: fix leak of nested actions While parsing user-provided actions, openvswitch module may dynamically allocate memory and store pointers in the internal copy of the actions. So this memory has to be freed while destroying the actions. Currently there are only two such actions: ct() and set(). However, there are many actions that can hold nested lists of actions and ovs_nla_free_flow_actions() just jumps over them leaking the memory. For example, removal of the flow with the following actions will lead to a leak of the memory allocated by nf_ct_tmpl_alloc()