p PatchFirst

PatchFirst · Свежие уязвимости

Уязвимости linux · Страница 100

За последние 30 дней в linux опубликовано уязвимостей: 298; в каталоге KEV: 0.

Фильтры уязвимостей
Сбросить фильтры

Уязвимостей: 4292

  1. CVE-2023-53724

    Без оценкиEPSS 0,21%Нет опубликованного исправления

    mfd: pcf50633-adc: Fix potential memleak in pcf50633_adc_async_read()

    In the Linux kernel, the following vulnerability has been resolved: mfd: pcf50633-adc: Fix potential memleak in pcf50633_adc_async_read() `req` is allocated in pcf50633_adc_async_read(), but adc_enqueue_request() could fail to insert the `req` into queue. We need to check the return value and free it in the case of failure.

  2. CVE-2023-53722

    Без оценкиEPSS 0,21%Нет опубликованного исправления

    md: raid1: fix potential OOB in raid1_remove_disk()

    In the Linux kernel, the following vulnerability has been resolved: md: raid1: fix potential OOB in raid1_remove_disk() If rddev->raid_disk is greater than mddev->raid_disks, there will be an out-of-bounds in raid1_remove_disk(). We have already found similar reports as follows: 1) commit d17f744e883b ("md-raid10: fix KASAN warning") 2) commit 1ebc2cec0b7d ("dm raid: fix KASAN warning in raid5_remove_disk") Fix this bug by checking whether the "number" variable is valid.

  3. CVE-2023-53718

    Высокий · CVSS 7.8EPSS 0,15%Нет опубликованного исправления

    ring-buffer: Do not swap cpu_buffer during resize process

    In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Do not swap cpu_buffer during resize process When ring_buffer_swap_cpu was called during resize process, the cpu buffer was swapped in the middle, resulting in incorrect state. Continuing to run in the wrong state will result in oops. This issue can be easily reproduced using the following two scripts: /tmp # cat test1.sh //#! /bin/sh for i in `seq 0 100000` do echo 2000 > /sys/kernel/debug/tracing/buffer_size_kb sleep 0.5 echo 5000 > /sys/kernel/debug/tracing/buffer_size_kb sleep 0.5 done /tmp # cat test2.sh //#! /bin/sh fo

    Опубликовано Обновлено
  4. CVE-2023-53717

    Высокий · CVSS 7EPSS 0,21%Нет опубликованного исправления

    wifi: ath9k: Fix potential stack-out-of-bounds write in ath9k_wmi_rsp_callback()

    In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k: Fix potential stack-out-of-bounds write in ath9k_wmi_rsp_callback() Fix a stack-out-of-bounds write that occurs in a WMI response callback function that is called after a timeout occurs in ath9k_wmi_cmd(). The callback writes to wmi->cmd_rsp_buf, a stack-allocated buffer that could no longer be valid when a timeout occurs. Set wmi->last_seq_id to 0 when a timeout occurred. Found by a modified version of syzkaller. BUG: KASAN: stack-out-of-bounds in ath9k_wmi_ctrl_rx Write of size 4 Call Trace: memcpy ath9k_wmi_ctrl_rx ath9k_htc_rx_msg ath9k_hif_usb_reg_in

  5. CVE-2023-53712

    Без оценкиEPSS 0,21%Нет опубликованного исправления

    ARM: 9317/1: kexec: Make smp stop calls asynchronous

    In the Linux kernel, the following vulnerability has been resolved: ARM: 9317/1: kexec: Make smp stop calls asynchronous If a panic is triggered by a hrtimer interrupt all online cpus will be notified and set offline. But as highlighted by commit 19dbdcb8039c ("smp: Warn on function calls from softirq context") this call should not be made synchronous with disabled interrupts: softdog: Initiating panic Kernel panic - not syncing: Software Watchdog Timer expired WARNING: CPU: 1 PID: 0 at kernel/smp.c:753 smp_call_function_many_cond unwind_backtrace: show_stack dump_stack_lvl __warn warn_slowpath_fmt smp_call_f

  6. CVE-2023-53705

    Высокий · CVSS 8.2EPSS 0,56%Нет опубликованного исправления

    ipv6: Fix out-of-bounds access in ipv6_find_tlv()

    In the Linux kernel, the following vulnerability has been resolved: ipv6: Fix out-of-bounds access in ipv6_find_tlv() optlen is fetched without checking whether there is more than one byte to parse. It can lead to out-of-bounds access. Found by InfoTeCS on behalf of Linux Verification Center (linuxtesting.org) with SVACE.

    Опубликовано Обновлено
  7. CVE-2022-50581

    Высокий · CVSS 7.8EPSS 0,18%Нет опубликованного исправления

    hfs: fix OOB Read in __hfs_brec_find

    In the Linux kernel, the following vulnerability has been resolved: hfs: fix OOB Read in __hfs_brec_find Syzbot reported a OOB read bug: ================================================================== BUG: KASAN: slab-out-of-bounds in hfs_strcmp+0x117/0x190 fs/hfs/string.c:84 Read of size 1 at addr ffff88807eb62c4e by task kworker/u4:1/11 CPU: 1 PID: 11 Comm: kworker/u4:1 Not tainted 6.1.0-rc6-syzkaller-00308-g644e9524388a #0 Workqueue: writeback wb_workfn (flush-7:0) Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1b1/0x28e lib/dump_stack.c:106 print_address_description+0x74/0x340 mm/kasan/report.c:284

    Опубликовано Обновлено
  8. CVE-2022-50580

    Без оценкиEPSS 0,21%Нет опубликованного исправления

    blk-throttle: prevent overflow while calculating wait time

    In the Linux kernel, the following vulnerability has been resolved: blk-throttle: prevent overflow while calculating wait time There is a problem found by code review in tg_with_in_bps_limit() that 'bps_limit * jiffy_elapsed_rnd' might overflow. Fix the problem by calling mul_u64_u64_div_u64() instead.

  9. CVE-2022-50576

    Без оценкиEPSS 0,25%Нет опубликованного исправления

    serial: pch: Fix PCI device refcount leak in pch_request_dma()

    In the Linux kernel, the following vulnerability has been resolved: serial: pch: Fix PCI device refcount leak in pch_request_dma() As comment of pci_get_slot() says, it returns a pci_device with its refcount increased. The caller must decrement the reference count by calling pci_dev_put(). Since 'dma_dev' is only used to filter the channel in filter(), we can call pci_dev_put() before exiting from pch_request_dma(). Add the missing pci_dev_put() for the normal and error path.

  10. CVE-2022-50569

    Высокий · CVSS 7.8EPSS 0,17%Нет опубликованного исправления

    xfrm: Update ipcomp_scratches with NULL when freed

    In the Linux kernel, the following vulnerability has been resolved: xfrm: Update ipcomp_scratches with NULL when freed Currently if ipcomp_alloc_scratches() fails to allocate memory ipcomp_scratches holds obsolete address. So when we try to free the percpu scratches using ipcomp_free_scratches() it tries to vfree non existent vm area. Described below: static void * __percpu *ipcomp_alloc_scratches(void) { ... scratches = alloc_percpu(void *); if (!scratches) return NULL; ipcomp_scratches does not know about this allocation failure. Therefore holding the old obsolete address. ... } So when we

    Опубликовано Обновлено
  11. CVE-2022-50568

    Без оценкиEPSS 0,22%Нет опубликованного исправления

    usb: gadget: f_hid: fix f_hidg lifetime vs cdev

    In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_hid: fix f_hidg lifetime vs cdev The embedded struct cdev does not have its lifetime correctly tied to the enclosing struct f_hidg, so there is a use-after-free if /dev/hidgN is held open while the gadget is deleted. This can readily be replicated with libusbgx's example programs (for conciseness - operating directly via configfs is equivalent): gadget-hid exec 3<> /dev/hidg0 gadget-vid-pid-remove exec 3<&- Pull the existing device up in to struct f_hidg and make use of the cdev_device_{add,del}() helpers. This changes the lifetime of the device objec

  12. CVE-2022-50567

    Высокий · CVSS 7.8EPSS 0,17%Нет опубликованного исправления

    fs: jfs: fix shift-out-of-bounds in dbAllocAG

    In the Linux kernel, the following vulnerability has been resolved: fs: jfs: fix shift-out-of-bounds in dbAllocAG Syzbot found a crash : UBSAN: shift-out-of-bounds in dbAllocAG. The underlying bug is the missing check of bmp->db_agl2size. The field can be greater than 64 and trigger the shift-out-of-bounds. Fix this bug by adding a check of bmp->db_agl2size in dbMount since this field is used in many following functions. The upper bound for this field is L2MAXL2SIZE - L2MAXAG, thanks for the help of Dave Kleikamp. Note that, for maintenance, I reorganized error handling code of dbMount.

    Опубликовано Обновлено
  13. CVE-2022-50566

    Без оценкиEPSS 0,25%Нет опубликованного исправления

    mtd: Fix device name leak when register device failed in add_mtd_device()

    In the Linux kernel, the following vulnerability has been resolved: mtd: Fix device name leak when register device failed in add_mtd_device() There is a kmemleak when register device failed: unreferenced object 0xffff888101aab550 (size 8): comm "insmod", pid 3922, jiffies 4295277753 (age 925.408s) hex dump (first 8 bytes): 6d 74 64 30 00 88 ff ff mtd0.... backtrace: [<00000000bde26724>] __kmalloc_node_track_caller+0x4e/0x150 [<000000003c32b416>] kvasprintf+0xb0/0x130 [<000000001f7a8f15>] kobject_set_name_vargs+0x2f/0xb0 [<000000006e781163>] dev_set_name+0xab/0xe0 [<0

  14. CVE-2022-50564

    Без оценкиEPSS 0,25%Нет опубликованного исправления

    s390/netiucv: Fix return type of netiucv_tx()

    In the Linux kernel, the following vulnerability has been resolved: s390/netiucv: Fix return type of netiucv_tx() With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG), indirect call targets are validated against the expected function pointer prototype to make sure the call target is valid to help mitigate ROP attacks. If they are not identical, there is a failure at run time, which manifests as either a kernel panic or thread getting killed. A proposed warning in clang aims to catch these at compile time, which reveals: drivers/s390/net/netiucv.c:1854:21: error: incompatible function pointer types initializing 'netdev_tx_t

  15. CVE-2022-50563

    Без оценкиEPSS 0,25%Нет опубликованного исправления

    dm thin: Fix UAF in run_timer_softirq()

    In the Linux kernel, the following vulnerability has been resolved: dm thin: Fix UAF in run_timer_softirq() When dm_resume() and dm_destroy() are concurrent, it will lead to UAF, as follows: BUG: KASAN: use-after-free in __run_timers+0x173/0x710 Write of size 8 at addr ffff88816d9490f0 by task swapper/0/0 <snip> Call Trace: <IRQ> dump_stack_lvl+0x73/0x9f print_report.cold+0x132/0xaa2 _raw_spin_lock_irqsave+0xcd/0x160 __run_timers+0x173/0x710 kasan_report+0xad/0x110 __run_timers+0x173/0x710 __asan_store8+0x9c/0x140 __run_timers+0x173/0x710 call_timer_fn+0x310/0x310 pvclock_clocksource_read+0xfa/0x250 kvm_clock_rea

  16. CVE-2025-40011

    Без оценкиEPSS 0,26%Нет опубликованного исправления

    drm/gma500: Fix null dereference in hdmi teardown

    In the Linux kernel, the following vulnerability has been resolved: drm/gma500: Fix null dereference in hdmi teardown pci_set_drvdata sets the value of pdev->driver_data to NULL, after which the driver_data obtained from the same dev is dereferenced in oaktrail_hdmi_i2c_exit, and the i2c_dev is extracted from it. To prevent this, swap these calls. Found by Linux Verification Center (linuxtesting.org) with Svacer.

  17. CVE-2025-40001

    Без оценкиEPSS 0,26%Нет опубликованного исправления

    scsi: mvsas: Fix use-after-free bugs in mvs_work_queue

    In the Linux kernel, the following vulnerability has been resolved: scsi: mvsas: Fix use-after-free bugs in mvs_work_queue During the detaching of Marvell's SAS/SATA controller, the original code calls cancel_delayed_work() in mvs_free() to cancel the delayed work item mwq->work_q. However, if mwq->work_q is already running, the cancel_delayed_work() may fail to cancel it. This can lead to use-after-free scenarios where mvs_free() frees the mvs_info while mvs_work_queue() is still executing and attempts to access the already-freed mvs_info. A typical race condition is illustrated below: CPU 0 (remove) | CPU 1 (delayed work call

  18. CVE-2025-39998

    Высокий · CVSS 7.1EPSS 0,17%Нет опубликованного исправления

    scsi: target: target_core_configfs: Add length check to avoid buffer overflow

    In the Linux kernel, the following vulnerability has been resolved: scsi: target: target_core_configfs: Add length check to avoid buffer overflow A buffer overflow arises from the usage of snprintf to write into the buffer "buf" in target_lu_gp_members_show function located in /drivers/target/target_core_configfs.c. This buffer is allocated with size LU_GROUP_NAME_BUF (256 bytes). snprintf(...) formats multiple strings into buf with the HBA name (hba->hba_group.cg_item), a slash character, a devicename (dev-> dev_group.cg_item) and a newline character, the total formatted string length may exceed the buffer size of 256 bytes. Since snprin

    Опубликовано Обновлено
  19. CVE-2025-39996

    Без оценкиEPSS 0,23%Нет опубликованного исправления

    media: b2c2: Fix use-after-free causing by irq_check_work in flexcop_pci_remove

    In the Linux kernel, the following vulnerability has been resolved: media: b2c2: Fix use-after-free causing by irq_check_work in flexcop_pci_remove The original code uses cancel_delayed_work() in flexcop_pci_remove(), which does not guarantee that the delayed work item irq_check_work has fully completed if it was already running. This leads to use-after-free scenarios where flexcop_pci_remove() may free the flexcop_device while irq_check_work is still active and attempts to dereference the device. A typical race condition is illustrated below: CPU 0 (remove) | CPU 1 (delayed work callback) flexcop_pci_remove()

  20. CVE-2025-39993

    Высокий · CVSS 7.8EPSS 0,16%Нет опубликованного исправления

    media: rc: fix races with imon_disconnect()

    In the Linux kernel, the following vulnerability has been resolved: media: rc: fix races with imon_disconnect() Syzbot reports a KASAN issue as below: BUG: KASAN: use-after-free in __create_pipe include/linux/usb.h:1945 [inline] BUG: KASAN: use-after-free in send_packet+0xa2d/0xbc0 drivers/media/rc/imon.c:627 Read of size 4 at addr ffff8880256fb000 by task syz-executor314/4465 CPU: 2 PID: 4465 Comm: syz-executor314 Not tainted 6.0.0-rc1-syzkaller #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_a

    Опубликовано Обновлено

Проверьте свой сервер

Сопоставьте установленный стек и версии со свежими базами уязвимостей.

Проверьте свой сервер →