Уязвимости linux-hwe · Страница 173

scsi: ses: Handle enclosure with just a primary component gracefully

In the Linux kernel, the following vulnerability has been resolved: scsi: ses: Handle enclosure with just a primary component gracefully This reverts commit 3fe97ff3d949 ("scsi: ses: Don't attach if enclosure has no components") and introduces proper handling of case where there are no detected secondary components, but primary component (enumerated in num_enclosures) does exist. That fix was originally proposed by Ding Hui <dinghui@sangfor.com.cn>. Completely ignoring devices that have one primary enclosure and no secondary one results in ses_intf_add() bailing completely scsi 2:0:0:254: enclosure has no enumerated components sc

btrfs: don't check PageError in __extent_writepage

In the Linux kernel, the following vulnerability has been resolved: btrfs: don't check PageError in __extent_writepage __extent_writepage currenly sets PageError whenever any error happens, and the also checks for PageError to decide if to call error handling. This leads to very unclear responsibility for cleaning up on errors. In the VM and generic writeback helpers the basic idea is that once I/O is fired off all error handling responsibility is delegated to the end I/O handler. But if that end I/O handler sets the PageError bit, and the submitter checks it, the bit could in some cases leak into the submission context for fast enough I/O

media: platform: mediatek: vpu: fix NULL ptr dereference

In the Linux kernel, the following vulnerability has been resolved: media: platform: mediatek: vpu: fix NULL ptr dereference If pdev is NULL, then it is still dereferenced. This fixes this smatch warning: drivers/media/platform/mediatek/vpu/mtk_vpu.c:570 vpu_load_firmware() warn: address of NULL pointer 'pdev'

Bluetooth: hci_sysfs: Fix attempting to call device_add multiple times

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sysfs: Fix attempting to call device_add multiple times device_add shall not be called multiple times as stated in its documentation: 'Do not call this routine or device_register() more than once for any device structure' Syzkaller reports a bug as follows [1]: ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:33! invalid opcode: 0000 [#1] PREEMPT SMP KASAN [...] Call Trace: <TASK> __list_add include/linux/list.h:69 [inline] list_add_tail include/linux/list.h:102 [inline] kobj_kset_join lib/kobject.c:164 [inline] kobject_add_interna

• Обновитесь до 4.15.0-206.217~16.04.1

parisc: led: Fix potential null-ptr-deref in start_task()

In the Linux kernel, the following vulnerability has been resolved: parisc: led: Fix potential null-ptr-deref in start_task() start_task() calls create_singlethread_workqueue() and not checked the ret value, which may return NULL. And a null-ptr-deref may happen: start_task() create_singlethread_workqueue() # failed, led_wq is NULL queue_delayed_work() queue_delayed_work_on() __queue_delayed_work() # warning here, but continue __queue_work() # access wq->flags, null-ptr-deref Check the ret value and return -ENOMEM if it is NULL.

• Обновитесь до 4.15.0-208.219~16.04.1

scsi: fcoe: Fix transport not deattached when fcoe_if_init() fails

In the Linux kernel, the following vulnerability has been resolved: scsi: fcoe: Fix transport not deattached when fcoe_if_init() fails fcoe_init() calls fcoe_transport_attach(&fcoe_sw_transport), but when fcoe_if_init() fails, &fcoe_sw_transport is not detached and leaves freed &fcoe_sw_transport on fcoe_transports list. This causes panic when reinserting module. BUG: unable to handle page fault for address: fffffbfff82e2213 RIP: 0010:fcoe_transport_attach+0xe1/0x230 [libfcoe] Call Trace: <TASK> do_one_initcall+0xd0/0x4e0 load_module+0x5eee/0x7210 ...

• Обновитесь до 4.15.0-208.219~16.04.1

drm: bridge: adv7511: unregister cec i2c device after cec adapter

In the Linux kernel, the following vulnerability has been resolved: drm: bridge: adv7511: unregister cec i2c device after cec adapter cec_unregister_adapter() assumes that the underlying adapter ops are callable. For example, if the CEC adapter currently has a valid physical address, then the unregistration procedure will invalidate the physical address by setting it to f.f.f.f. Whence the following kernel oops observed after removing the adv7511 module: Unable to handle kernel execution of user memory at virtual address 0000000000000000 Internal error: Oops: 86000004 [#1] PREEMPT_RT SMP Call trace: 0x0 adv7511_cec_ad

ACPICA: Fix error code path in acpi_ds_call_control_method()

In the Linux kernel, the following vulnerability has been resolved: ACPICA: Fix error code path in acpi_ds_call_control_method() A use-after-free in acpi_ps_parse_aml() after a failing invocaion of acpi_ds_call_control_method() is reported by KASAN [1] and code inspection reveals that next_walk_state pushed to the thread by acpi_ds_create_walk_state() is freed on errors, but it is not popped from the thread beforehand. Thus acpi_ds_get_current_walk_state() called by acpi_ps_parse_aml() subsequently returns it as the new walk state which is incorrect. To address this, make acpi_ds_call_control_method() call acpi_ds_pop_walk_state() to pop

• Обновитесь до 4.15.0-208.219~16.04.1

NFSD: Protect against send buffer overflow in NFSv2 READ

In the Linux kernel, the following vulnerability has been resolved: NFSD: Protect against send buffer overflow in NFSv2 READ Since before the git era, NFSD has conserved the number of pages held by each nfsd thread by combining the RPC receive and send buffers into a single array of pages. This works because there are no cases where an operation needs a large RPC Call message and a large RPC Reply at the same time. Once an RPC Call has been received, svc_process() updates svc_rqst::rq_res to describe the part of rq_pages that can be used for constructing the Reply. This means that the send buffer (rq_res) shrinks when the received RPC reco

wifi: brcmfmac: fix use-after-free bug in brcmf_netdev_start_xmit()

In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: fix use-after-free bug in brcmf_netdev_start_xmit() > ret = brcmf_proto_tx_queue_data(drvr, ifp->ifidx, skb); may be schedule, and then complete before the line > ndev->stats.tx_bytes += skb->len; [ 46.912801] ================================================================== [ 46.920552] BUG: KASAN: use-after-free in brcmf_netdev_start_xmit+0x718/0x8c8 [brcmfmac] [ 46.928673] Read of size 4 at addr ffffff803f5882e8 by task systemd-resolve/328 [ 46.935991] [ 46.937514] CPU: 1 PID: 328 Comm: systemd-resolve Tainted: G O 5.4.199-[RE

• Обновитесь до 4.15.0-206.217~16.04.1

iomap: iomap: fix memory corruption when recording errors during writeback

In the Linux kernel, the following vulnerability has been resolved: iomap: iomap: fix memory corruption when recording errors during writeback Every now and then I see this crash on arm64: Unable to handle kernel NULL pointer dereference at virtual address 00000000000000f8 Buffer I/O error on dev dm-0, logical block 8733687, async page read Mem abort info: ESR = 0x0000000096000006 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x06: level 2 translation fault Data abort info: ISV = 0, ISS = 0x00000006 CM = 0, WnR = 0 user pgtable: 64k pages, 42-bit VAs, pgdp=0000000139750000 [00000000000000

net/tunnel: wait until all sk_user_data reader finish before releasing the sock

In the Linux kernel, the following vulnerability has been resolved: net/tunnel: wait until all sk_user_data reader finish before releasing the sock There is a race condition in vxlan that when deleting a vxlan device during receiving packets, there is a possibility that the sock is released after getting vxlan_sock vs from sk_user_data. Then in later vxlan_ecn_decapsulate(), vxlan_get_sk_family() we will got NULL pointer dereference. e.g. #0 [ffffa25ec6978a38] machine_kexec at ffffffff8c669757 #1 [ffffa25ec6978a90] __crash_kexec at ffffffff8c7c0a4d #2 [ffffa25ec6978b58] crash_kexec at ffffffff8c7c1c48 #3 [ffffa25ec6978b60] oops

• Обновитесь до 4.15.0-208.219~16.04.1

drivers/md/md-bitmap: check the return value of md_bitmap_get_counter()

In the Linux kernel, the following vulnerability has been resolved: drivers/md/md-bitmap: check the return value of md_bitmap_get_counter() Check the return value of md_bitmap_get_counter() in case it returns NULL pointer, which will result in a null pointer dereference. v2: update the check to include other dereference

nfsd: under NFSv4.1, fix double svc_xprt_put on rpc_create failure

In the Linux kernel, the following vulnerability has been resolved: nfsd: under NFSv4.1, fix double svc_xprt_put on rpc_create failure On error situation `clp->cl_cb_conn.cb_xprt` should not be given a reference to the xprt otherwise both client cleanup and the error handling path of the caller call to put it. Better to delay handing over the reference to a later branch. [ 72.530665] refcount_t: underflow; use-after-free. [ 72.531933] WARNING: CPU: 0 PID: 173 at lib/refcount.c:28 refcount_warn_saturate+0xcf/0x120 [ 72.533075] Modules linked in: nfsd(OE) nfsv4(OE) nfsv3(OE) nfs(OE) lockd(OE) compat_nfs_ssc(OE) nfs_acl(OE) rpcsec_gss_k

• Обновитесь до 4.15.0-208.219~16.04.1

ALSA: hda: Fix Oops by 9.1 surround channel names

In the Linux kernel, the following vulnerability has been resolved: ALSA: hda: Fix Oops by 9.1 surround channel names get_line_out_pfx() may trigger an Oops by overflowing the static array with more than 8 channels. This was reported for MacBookPro 12,1 with Cirrus codec. As a workaround, extend for the 9.1 channels and also fix the potential Oops by unifying the code paths accessing the same array with the proper size check.

modpost: fix off by one in is_executable_section()

In the Linux kernel, the following vulnerability has been resolved: modpost: fix off by one in is_executable_section() The > comparison should be >= to prevent an out of bounds array access.

ACPICA: Add AML_NO_OPERAND_RESOLVE flag to Timer

In the Linux kernel, the following vulnerability has been resolved: ACPICA: Add AML_NO_OPERAND_RESOLVE flag to Timer ACPICA commit 90310989a0790032f5a0140741ff09b545af4bc5 According to the ACPI specification 19.6.134, no argument is required to be passed for ASL Timer instruction. For taking care of no argument, AML_NO_OPERAND_RESOLVE flag is added to ASL Timer instruction opcode. When ASL timer instruction interpreted by ACPI interpreter, getting error. After adding AML_NO_OPERAND_RESOLVE flag to ASL Timer instruction opcode, issue is not observed. ============================================================= UBSAN: array-index-out-of-b

shmem: use ramfs_kill_sb() for kill_sb method of ramfs-based tmpfs

In the Linux kernel, the following vulnerability has been resolved: shmem: use ramfs_kill_sb() for kill_sb method of ramfs-based tmpfs As the ramfs-based tmpfs uses ramfs_init_fs_context() for the init_fs_context method, which allocates fc->s_fs_info, use ramfs_kill_sb() to free it and avoid a memory leak.

drm/mediatek: Clean dangling pointer on bind error path

In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: Clean dangling pointer on bind error path mtk_drm_bind() can fail, in which case drm_dev_put() is called, destroying the drm_device object. However a pointer to it was still being held in the private object, and that pointer would be passed along to DRM in mtk_drm_sys_prepare() if a suspend were triggered at that point, resulting in a panic. Clean the pointer when destroying the object in the error path to prevent this from happening.

wifi: mwifiex: avoid possible NULL skb pointer dereference

In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: avoid possible NULL skb pointer dereference In 'mwifiex_handle_uap_rx_forward()', always check the value returned by 'skb_copy()' to avoid potential NULL pointer dereference in 'mwifiex_uap_queue_bridged_pkt()', and drop original skb in case of copying failure. Found by Linux Verification Center (linuxtesting.org) with SVACE.