Уязвимости linux-gcp-4.15 · Страница 118

comedi: Reinit dev->spinlock between attachments to low-level drivers

In the Linux kernel, the following vulnerability has been resolved: comedi: Reinit dev->spinlock between attachments to low-level drivers `struct comedi_device` is the main controlling structure for a COMEDI device created by the COMEDI subsystem. It contains a member `spinlock` containing a spin-lock that is initialized by the COMEDI subsystem, but is reserved for use by a low-level driver attached to the COMEDI device (at least since commit 25436dc9d84f ("Staging: comedi: remove RT code")). Some COMEDI devices (those created on initialization of the COMEDI subsystem when the "comedi.comedi_num_legacy_minors" parameter is non-zero) can b

ipv6: prevent possible UaF in addrconf_permanent_addr()

In the Linux kernel, the following vulnerability has been resolved: ipv6: prevent possible UaF in addrconf_permanent_addr() The mentioned helper try to warn the user about an exceptional condition, but the message is delivered too late, accessing the ipv6 after its possible deletion. Reorder the statement to avoid the possible UaF; while at it, place the warning outside the idev->lock as it needs no protection.

btrfs: reserve enough transaction items for qgroup ioctls

In the Linux kernel, the following vulnerability has been resolved: btrfs: reserve enough transaction items for qgroup ioctls Currently our qgroup ioctls don't reserve any space, they just do a transaction join, which does not reserve any space, neither for the quota tree updates nor for the delayed refs generated when updating the quota tree. The quota root uses the global block reserve, which is fine most of the time since we don't expect a lot of updates to the quota root, or to be too close to -ENOSPC such that other critical metadata updates need to resort to the global reserve. However this is not optimal, as not reserving proper spa

lib/crypto: chacha: Zeroize permuted_state before it leaves scope

In the Linux kernel, the following vulnerability has been resolved: lib/crypto: chacha: Zeroize permuted_state before it leaves scope Since the ChaCha permutation is invertible, the local variable 'permuted_state' is sufficient to compute the original 'state', and thus the key, even after the permutation has been done. While the kernel is quite inconsistent about zeroizing secrets on the stack (and some prominent userspace crypto libraries don't bother at all since it's not guaranteed to work anyway), the kernel does try to do it as a best practice, especially in cases involving the RNG. Thus, explicitly zeroize 'permuted_state' before it

Bluetooth: SMP: force responder MITM requirements before building the pairing response

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: SMP: force responder MITM requirements before building the pairing response smp_cmd_pairing_req() currently builds the pairing response from the initiator auth_req before enforcing the local BT_SECURITY_HIGH requirement. If the initiator omits SMP_AUTH_MITM, the response can also omit it even though the local side still requires MITM. tk_request() then sees an auth value without SMP_AUTH_MITM and may select JUST_CFM, making method selection inconsistent with the pairing policy the responder already enforces. When the local side requires HIGH security, first ver

USB: dummy-hcd: Fix locking/synchronization error

In the Linux kernel, the following vulnerability has been resolved: USB: dummy-hcd: Fix locking/synchronization error Syzbot testing was able to provoke an addressing exception and crash in the usb_gadget_udc_reset() routine in drivers/usb/gadgets/udc/core.c, resulting from the fact that the routine was called with a second ("driver") argument of NULL. The bad caller was set_link_state() in dummy_hcd.c, and the problem arose because of a race between a USB reset and driver unbind. These sorts of races were not supposed to be possible; commit 7dbd8f4cabd9 ("USB: dummy-hcd: Fix erroneous synchronization change"), along with a few followup c

media: solo6x10: Check for out of bounds chip_id

In the Linux kernel, the following vulnerability has been resolved: media: solo6x10: Check for out of bounds chip_id Clang with CONFIG_UBSAN_SHIFT=y noticed a condition where a signed type (literal "1" is an "int") could end up being shifted beyond 32 bits, so instrumentation was added (and due to the double is_tw286x() call seen via inlining), Clang decides the second one must now be undefined behavior and elides the rest of the function[1]. This is a known problem with Clang (that is still being worked on), but we can avoid the entire problem by actually checking the existing max chip ID, and now there is no runtime instrumentation added

dm: remove fake timeout to avoid leak request

In the Linux kernel, the following vulnerability has been resolved: dm: remove fake timeout to avoid leak request Since commit 15f73f5b3e59 ("blk-mq: move failure injection out of blk_mq_complete_request"), drivers are responsible for calling blk_should_fake_timeout() at appropriate code paths and opportunities. However, the dm driver does not implement its own timeout handler and relies on the timeout handling of its slave devices. If an io-timeout-fail error is injected to a dm device, the request will be leaked and never completed, causing tasks to hang indefinitely. Reproduce: 1. prepare dm which has iscsi slave device 2. inject io-t

ACPI: processor: Fix NULL-pointer dereference in acpi_processor_errata_piix4()

In the Linux kernel, the following vulnerability has been resolved: ACPI: processor: Fix NULL-pointer dereference in acpi_processor_errata_piix4() In acpi_processor_errata_piix4(), the pointer dev is first assigned an IDE device and then reassigned an ISA device: dev = pci_get_subsys(..., PCI_DEVICE_ID_INTEL_82371AB, ...); dev = pci_get_subsys(..., PCI_DEVICE_ID_INTEL_82371AB_0, ...); If the first lookup succeeds but the second fails, dev becomes NULL. This leads to a potential null-pointer dereference when dev_dbg() is called: if (errata.piix4.bmisx) dev_dbg(&dev->dev, ...); To prevent this, use two temporary pointers and ret

md raid: fix hang when stopping arrays with metadata through dm-raid

In the Linux kernel, the following vulnerability has been resolved: md raid: fix hang when stopping arrays with metadata through dm-raid When using device-mapper's dm-raid target, stopping a RAID array can cause the system to hang under specific conditions. This occurs when: - A dm-raid managed device tree is suspended from top to bottom (the top-level RAID device is suspended first, followed by its underlying metadata and data devices) - The top-level RAID device is then removed Removing the top-level device triggers a hang in the following sequence: the dm-raid destructor calls md_stop(), which tries to flush the write-intent b

btrfs: don't BUG() on unexpected delayed ref type in run_one_delayed_ref()

In the Linux kernel, the following vulnerability has been resolved: btrfs: don't BUG() on unexpected delayed ref type in run_one_delayed_ref() There is no need to BUG(), we can just return an error and log an error message.

drm/v3d: Set DMA segment size to avoid debug warnings

In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Set DMA segment size to avoid debug warnings When using V3D rendering with CONFIG_DMA_API_DEBUG enabled, the kernel occasionally reports a segment size mismatch. This is because 'max_seg_size' is not set. The kernel defaults to 64K. setting 'max_seg_size' to the maximum will prevent 'debug_dma_map_sg()' from complaining about the over-mapping of the V3D segment length. DMA-API: v3d 1002000000.v3d: mapping sg segment longer than device claims to support [len=8290304] [max=65536] WARNING: CPU: 0 PID: 493 at kernel/dma/debug.c:1179 debug_dma_map_sg+0x330/0x388 CPU:

btrfs: do not ASSERT() when the fs flips RO inside btrfs_repair_io_failure()

In the Linux kernel, the following vulnerability has been resolved: btrfs: do not ASSERT() when the fs flips RO inside btrfs_repair_io_failure() [BUG] There is a bug report that when btrfs hits ENOSPC error in a critical path, btrfs flips RO (this part is expected, although the ENOSPC bug still needs to be addressed). The problem is after the RO flip, if there is a read repair pending, we can hit the ASSERT() inside btrfs_repair_io_failure() like the following: BTRFS info (device vdc): relocating block group 30408704 flags metadata|raid1 ------------[ cut here ]------------ BTRFS: Transaction aborted (error -28) WARNING: fs/btrfs/

octeontx2-af: Workaround SQM/PSE stalls by disabling sticky

In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: Workaround SQM/PSE stalls by disabling sticky NIX SQ manager sticky mode is known to cause stalls when multiple SQs share an SMQ and transmit concurrently. Additionally, PSE may deadlock on transitions between sticky and non-sticky transmissions. There is also a credit drop issue observed when certain condition clocks are gated. work around these hardware errata by: - Disabling SQM sticky operation: - Clear TM6 (bit 15) - Clear TM11 (bit 14) - Disabling sticky → non-sticky transition path that can deadlock PSE: - Clear TM5 (bit 23) - Preventing credit d

rapidio: replace rio_free_net() with kfree() in rio_scan_alloc_net()

In the Linux kernel, the following vulnerability has been resolved: rapidio: replace rio_free_net() with kfree() in rio_scan_alloc_net() When idtab allocation fails, net is not registered with rio_add_net() yet, so kfree(net) is sufficient to release the memory. Set mport->net to NULL to avoid dangling pointer.

ext4: move ext4_percpu_param_init() before ext4_mb_init()

In the Linux kernel, the following vulnerability has been resolved: ext4: move ext4_percpu_param_init() before ext4_mb_init() When running `kvm-xfstests -c ext4/1k -C 1 generic/383` with the `DOUBLE_CHECK` macro defined, the following panic is triggered: ================================================================== EXT4-fs error (device vdc): ext4_validate_block_bitmap:423: comm mount: bg 0: bad block bitmap checksum BUG: unable to handle page fault for address: ff110000fa2cc000 PGD 3e01067 P4D 3e02067 PUD 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 0 UID: 0 PID: 2386 Comm: mount Tainted: G W

drm: Account property blob allocations to memcg

In the Linux kernel, the following vulnerability has been resolved: drm: Account property blob allocations to memcg DRM_IOCTL_MODE_CREATEPROPBLOB allows userspace to allocate arbitrary-sized property blobs backed by kernel memory. Currently, the blob data allocation is not accounted to the allocating process's memory cgroup, allowing unprivileged users to trigger unbounded kernel memory consumption and potentially cause system-wide OOM. Mark the property blob data allocation with GFP_KERNEL_ACCOUNT so that the memory is properly charged to the caller's memcg. This ensures existing cgroup memory limits apply and prevents uncontrolled kerne

xfrm: esp: avoid in-place decrypt on shared skb frags

In the Linux kernel, the following vulnerability has been resolved: xfrm: esp: avoid in-place decrypt on shared skb frags MSG_SPLICE_PAGES can attach pages from a pipe directly to an skb. TCP marks such skbs with SKBFL_SHARED_FRAG after skb_splice_from_iter(), so later paths that may modify packet data can first make a private copy. The IPv4/IPv6 datagram append paths did not set this flag when splicing pages into UDP skbs. That leaves an ESP-in-UDP packet made from shared pipe pages looking like an ordinary uncloned nonlinear skb. ESP input then takes the no-COW fast path for uncloned skbs without a frag_list and decrypts in place over da

• Обновитесь до 4.15.0-1186.203

jfs: nlink overflow in jfs_rename

In the Linux kernel, the following vulnerability has been resolved: jfs: nlink overflow in jfs_rename If nlink is maximal for a directory (-1) and inside that directory you perform a rename for some child directory (not moving from the parent), then the nlink of the first directory is first incremented and later decremented. Normally this is fine, but when nlink = -1 this causes a wrap around to 0, and then drop_nlink issues a warning. After applying the patch syzbot no longer issues any warnings. I also ran some basic fs tests to look for any regressions.

memory: mtk-smi: fix device leak on larb probe

In the Linux kernel, the following vulnerability has been resolved: memory: mtk-smi: fix device leak on larb probe Make sure to drop the reference taken when looking up the SMI device during larb probe on late probe failure (e.g. probe deferral) and on driver unbind.