PatchFirst · Свежие уязвимости
За последние 30 дней в linux-azure-5.15 опубликовано уязвимостей: 594; в каталоге KEV: 0.
Уязвимостей: 6489
In the Linux kernel, the following vulnerability has been resolved: media: cec: Serialize exclusive follower delivery cec_receive_notify() reads the exclusive follower pointer without the adapter lock. Serialize the no-follower check and message delivery against mode changes and release.
In the Linux kernel, the following vulnerability has been resolved: media: cedrus: fix memory leak in cedrus_init_ctrls() In cedrus_init_ctrls(), the V4L2 control handler is initialized before allocating memory for ctx->ctrls. If this allocation fails, the function returns -ENOMEM without freeing the previously allocated handler resources, leading to a memory leak. Fix this by calling v4l2_ctrl_handler_free() on the ctx->ctrls allocation failure path. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet p
In the Linux kernel, the following vulnerability has been resolved: media: cobalt: Avoid freeing ALSA private data twice snd_cobalt_card_create() stores cobsc in sc->private_data and installs snd_cobalt_card_private_free() as sc->private_free. From that point, snd_card_free(sc) releases cobsc through the ALSA card cleanup path. If cobalt_alsa_init() fails after snd_cobalt_card_create(), the err_exit_free path calls snd_card_free(sc) and then kfree(cobsc). That second free releases the same object again. Remove the explicit kfree(cobsc) and leave ownership with the ALSA card. This issue was found by a static analysis checker and confirmed
In the Linux kernel, the following vulnerability has been resolved: media: cx231xx: reject geometry changes while the VBI queue is busy vidioc_s_fmt_vid_cap() and vidioc_s_std() change the device-wide dev->width / dev->norm but only refuse the change when the *video* queue (dev->vidq) is busy. The VBI queue (dev->vbiq) shares that same geometry: cx231xx_init_vbi_isoc() latches dma_q->lines_per_field from dev->norm, the VBI videobuf2 plane is sized from dev->width / dev->norm in vbi_queue_setup() and vbi_buf_prepare(), and cx231xx_do_vbi_copy() then recomputes the destination offset from the *live* dev->width and the latched lines_per_field
In the Linux kernel, the following vulnerability has been resolved: media: cx23885: cancel NetUP CI work before teardown netup_ci_exit() frees a netup_ci_state while its work item, netup_read_ci_status(), may still be pending or running on the system workqueue. The worker obtains the state with container_of() and dereferences it, so it must not outlive the state. netup_ci_init() queues the initial status read, and CI GPIO interrupts subsequently queue the same work from netup_ci_slot_status(). During remove, cx23885_finidev() calls free_irq() before the CI device is unregistered. free_irq() prevents further IRQ handlers from running, but d
In the Linux kernel, the following vulnerability has been resolved: media: em28xx: defer audio-only extension registration The audio-only path registers extensions while probing the primary device. For a dual-TS board, this happens before dev_next is created. The duplicate device inherits is_audio_only and is then independently inserted into em28xx_devlist. The list is intended to contain only primary devices: extension operations reach the secondary device through dev_next. The independently linked secondary can be freed during disconnect while its list node remains reachable, resulting in a use-after-free. Defer audio-only extension reg
In the Linux kernel, the following vulnerability has been resolved: media: em28xx: fix use-after-free of dev_next->devlist on disconnect When a device with has_dual_ts=1 is probed and the is_audio_only path is taken, both dev and dev->dev_next are added to the global em28xx_devlist via em28xx_init_extension(). However, during disconnect, em28xx_close_extension(dev) only calls list_del(&dev->devlist), leaving dev->dev_next->devlist still linked in the global list. When dev_next is subsequently freed via kref_put(), its devlist entry becomes a dangling pointer in em28xx_devlist. The next device probe that calls em28xx_init_extension() trigger
In the Linux kernel, the following vulnerability has been resolved: media: go7007: defer the ALSA v4l2 put until card release go7007_snd_init() already takes a v4l2_device reference for the ALSA side, but go7007_snd_remove() drops it immediately after calling snd_card_free_when_closed(). That is too early when a userspace process still has the capture PCM open. The ALSA card and its PCM callbacks remain alive until the last file is closed, so the release path can still reach struct go7007 through pcm->private_data and call go7007_snd_hw_free() after the V4L2 release path has freed the object. Move the matching v4l2_device_put() to the ALS
In the Linux kernel, the following vulnerability has been resolved: media: i2c: ov02a10: fix endpoint parsing use-after-free The ov02a10_check_hwcfg() function calls fwnode_handle_put(ep) immediately after allocating and parsing the endpoint. However, it subsequently calls fwnode_property_read_u32() using the same 'ep' handle, leading to a potential use-after-free. Additionally, reading the optional 'ovti,mipi-clock-voltage' property used to overwrite the 'ret' variable. If the property was missing, 'ret' would become negative, and this failure code would be incorrectly returned at the end of the function, causing probe to fail entirely.
In the Linux kernel, the following vulnerability has been resolved: media: i2c: ov7740: fix use-after-destroy in remove The ov7740_remove() function had a severe teardown order bug where it destroyed the driver's mutex before freeing the V4L2 control handler which relies on that mutex, leading to a use-after-destroy kernel panic. Furthermore, the driver explicitly called v4l2_ctrl_handler_free() and mutex_destroy() sequentially, but then called ov7740_free_controls() which invokes both of them a second time, resulting in a double-free. This patch fixes the issue by unregistering the subdevice first, and relying exclusively on ov7740_free_c
In the Linux kernel, the following vulnerability has been resolved: media: rc: sunxi-cir: Unregister rc device on probe failure After rc_register_device() succeeds, later probe failures must undo the registration with rc_unregister_device(). The current error path jumps to the allocation cleanup label and only calls rc_free_device(), leaving the rc device registration and resources created by rc_register_device() behind. Add a registered-device unwind label for the IRQ lookup, IRQ request, and hardware initialization failure paths. Keep rc_free_device() for failures before rc_register_device() succeeds.
In the Linux kernel, the following vulnerability has been resolved: media: rtl2832_sdr: use vb2_video_unregister_device() on remove to fix DMA leak rtl2832_sdr_remove() runs on USB disconnect and clears dev->udev to NULL before any pending streaming teardown has run. When user space later closes its file descriptor, vb2 calls rtl2832_sdr_stop_streaming() which in turn calls rtl2832_sdr_free_stream_bufs(). That helper releases each coherent buffer with: usb_free_coherent(dev->udev, dev->buf_size, dev->buf_list[dev->buf_num], dev->dma_addr[dev->buf_num]); usb_free_coherent() returns immediatel
In the Linux kernel, the following vulnerability has been resolved: media: rtl2832_sdr: release URBs and stream buffers on start_streaming() failure rtl2832_sdr_start_streaming() calls rtl2832_sdr_alloc_stream_bufs(), rtl2832_sdr_alloc_urbs() and rtl2832_sdr_submit_urbs() in sequence and shares a single err: label that only unlocks the mutex and returns. When alloc_urbs() succeeds but submit_urbs() fails, or when alloc_urbs() itself returns -ENOMEM after alloc_stream_bufs() has already succeeded, the URBs and/or the coherent DMA stream buffers stay allocated while streaming reports failure to vb2. Two latent defects follow on the next VIDIO
In the Linux kernel, the following vulnerability has been resolved: media: s2255: bound JPEG frame size before copying into the buffer s2255_fillbuff() memcpy()s vc->jpg_size bytes of a captured JPEG/MJPEG frame into the vb2 plane. vc->jpg_size is taken verbatim from the S2255_MARKER_FRAME header the device sends (pdword[4] in save_frame()) and, unlike the frame payload length just above it, is never bounded: payload = le32_to_cpu(pdword[3]); if (payload > vc->req_image_size) /* payload is checked ... */ return -EINVAL; vc->pkt_size = payload; vc->jpg_size = le32_to_cpu(pdword[4]); /* ... jpg_size is not */ A malicious or malfuncti
In the Linux kernel, the following vulnerability has been resolved: media: s2255: check firmware size before reading trailing marker s2255_probe() reads a 4-byte marker and version from the last 8 bytes of the firmware blob (fw->data[fw_size - 8] and [fw_size - 4]). If the firmware file is shorter than 8 bytes, fw_size - 8 underflows and the access reads out of bounds. Validate the firmware size before indexing.
In the Linux kernel, the following vulnerability has been resolved: media: saa7164: fix cleanup on resource allocation failure saa7164_dev_setup() adds the device to the global saa7164_devlist before requesting the PCI BAR memory regions. If get_resources() fails, saa7164_dev_setup() decrements the device count and returns an error, but leaves the device on saa7164_devlist. The probe error path then frees the device, leaving a dangling entry on the global list. Reuse the existing MMIO mapping error path to remove the device from saa7164_devlist and decrement the device count before returning. Also release BAR0 if it was successfully requ
In the Linux kernel, the following vulnerability has been resolved: media: tda18250: fix possible integer overflow Integer overflow may occur, when variable exp equals to zero. Result of shift 1 << (exp - 1) may then leads to undefined behavior.
In the Linux kernel, the following vulnerability has been resolved: media: v4l2-fwnode: Fix fwnode leak in v4l2_fwnode_parse_link In v4l2_fwnode_parse_link(), the remote endpoint fwnode reference is acquired using fwnode_graph_get_remote_endpoint(). This reference is properly released in the error paths, but it is leaked on the success path. Add the missing fwnode_handle_put() before returning 0 to prevent the reference leak. [Sakari Ailus: Fix subject prefix and coding style a little.]
In the Linux kernel, the following vulnerability has been resolved: media: video-i2c: fix kthread error pointer left in kthread_vid_cap on failure kthread_run() returns an ERR_PTR on failure, not NULL. When start_streaming() fails, data->kthread_vid_cap is left holding this error pointer instead of being cleared. This causes two subsequent bugs: 1. A future call to start_streaming() sees a non-NULL kthread_vid_cap and returns 0 (success) immediately, without actually starting the capture thread. 2. A call to stop_streaming() checks 'kthread_vid_cap == NULL' which is false for an error pointer, and proceeds to call kthread_stop()
In the Linux kernel, the following vulnerability has been resolved: media: zoran: Avoid freeing a registered video_device twice zoran_init_video_device() installs zoran_vdev_release() as the video_device release callback through zoran_template. After video_register_device() succeeds, video_unregister_device() drops the registered video_device reference and the V4L2 core eventually invokes that release callback, which kfree()s the video_device. zoran_exit_video_devices() called video_unregister_device() and then kfree(zr->video_dev), so device teardown could free the same video_device twice. Remove the direct kfree() and clear the cached p
Сопоставьте установленный стек и версии со свежими базами уязвимостей.