Уязвимости linux-hwe-5.15 · Страница 89

ALSA: usb-audio: fix OOB write in snd_usbmidi_novation_output()

In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: fix OOB write in snd_usbmidi_novation_output() snd_usbmidi_novation_output() lays out a two-byte header at transfer_buffer[0..1] and passes &transfer_buffer[2] together with a length of ep->max_transfer - 2 to snd_rawmidi_transmit(): count = snd_rawmidi_transmit(ep->ports[0].substream, &transfer_buffer[2], ep->max_transfer - 2); ep->max_transfer comes from the output endpoint's wMaxPacketSize via usb_maxpacket(). A malformed or malicious device can advertise a bulk OUT endpoint with a wMaxPacketSize of 1 - the USB core only clamps this

• Обновитесь до 5.15.0-202.212~20.04.1

ALSA: usb-audio: Complete cleanup after system-resume errors

In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Complete cleanup after system-resume errors A failed system resume can leave the card unusable until reboot. usb_audio_resume() jumps to err_out when snd_usb_pcm_resume() or snd_usb_mixer_resume() fails. The error path skips the out: block, which restores D0 and decrements chip->num_suspended_intf. The card stays in SNDRV_CTL_POWER_D3hot, so later control access blocks in snd_power_ref_and_wait(). USB core logs an interface resume callback error. It does not retry that callback, so a later callback cannot complete the skipped cleanup. usb_audio_suspend()

• Обновитесь до 5.15.0-202.212~20.04.1

USB: serial: option: fix slab OOB read in interrupt URB callback

In the Linux kernel, the following vulnerability has been resolved: USB: serial: option: fix slab OOB read in interrupt URB callback The interrupt URB buffer is allocated in setup_port_interrupt_in() based on the endpoint's wMaxPacketSize: buffer_size = usb_endpoint_maxp(epd); port->interrupt_in_buffer = kmalloc(buffer_size, GFP_KERNEL); When a USB device declares wMaxPacketSize = 8 on its interrupt IN endpoint, the buffer is allocated from kmalloc-8 cache (exactly 8 bytes). If the device sends a short packet (actual_length < wMaxPacketSize), the URB completes with status == 0 and the callback proceeds to read: data[sizeof(s

• Обновитесь до 5.15.0-202.212~20.04.1

USB: c67x00: fix use-after-free in c67x00_add_iso_urb()

In the Linux kernel, the following vulnerability has been resolved: USB: c67x00: fix use-after-free in c67x00_add_iso_urb() When TD creation fails for the last packet of an isochronous URB, c67x00_add_iso_urb() gives the URB back before updating the endpoint scheduling state. c67x00_giveback_urb() frees the URB private data, and the completion callback may release the final URB reference. The following accesses to urbp->ep_data, urb->interval, and urbp->cnt can therefore use freed memory. Update next_frame and cnt before giving back the failed final packet, making the giveback the last operation that uses the URB and its private data.

• Обновитесь до 5.15.0-202.212~20.04.1

usb: usbfs: fix use-after-free of usb_device in usbdev_release()

In the Linux kernel, the following vulnerability has been resolved: usb: usbfs: fix use-after-free of usb_device in usbdev_release() usbdev_release() drops its reference to the struct usb_device before draining the list of completed async URBs, but that drain path reads back through the same object: free_async() calls dec_usb_memory_use_count() for any URB whose buffer came from the usbfs mmap() region, and its first statement is bus_to_hcd(ps->dev->bus). After a disconnect the usbfs reference can be the last one, in which case usb_put_dev() frees the device and the subsequent loop reads offset 80 of freed memory and uses the result as a s

• Обновитесь до 5.15.0-202.212~20.04.1

nfc: st21nfca: validate ATR_REQ length against the received frame

In the Linux kernel, the following vulnerability has been resolved: nfc: st21nfca: validate ATR_REQ length against the received frame st21nfca_tm_recv_atr_req() checks that the received ATR_REQ frame is at least ST21NFCA_ATR_REQ_MIN_SIZE and that the self-declared atr_req->length is at least sizeof(struct st21nfca_atr_req), but never checks that atr_req->length does not exceed the actual received length (skb->len). st21nfca_tm_send_atr_res() then trusts the declared length: gb_len = atr_req->length - sizeof(struct st21nfca_atr_req); ... memcpy(atr_res->gbi, atr_req->gbi, gb_len); so an RF peer that sends a short frame but sets atr_req

• Обновитесь до 5.15.0-202.212~20.04.1

xfs: don't livelock in scrub on a circular unlinked list

In the Linux kernel, the following vulnerability has been resolved: xfs: don't livelock in scrub on a circular unlinked list LOLLM points out that online fsck can livelock if an unlinked inode list contains a loop. Use a bitmap to detect cycles.

Bluetooth: RFCOMM: take rfcomm_mutex for the deferred setup accept

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: take rfcomm_mutex for the deferred setup accept rfcomm_sock_recvmsg() completes a deferred setup by calling rfcomm_dlc_accept() without holding any RFCOMM lock: if (test_and_clear_bit(RFCOMM_DEFER_SETUP, &d->flags)) { rfcomm_dlc_accept(d); return 0; } and rfcomm_dlc_accept() dereferences the session on its first line: struct sock *sk = d->session->sock->sk; Every other path that touches d->session runs under rfcomm_mutex: rfcomm_dlc_open(), rfcomm_dlc_close(), rfcomm_dlc_exists(), rfcomm_dlc_send_rpn(), and the RFCOMM thread through rfcomm_proc

• Обновитесь до 5.15.0-202.212~20.04.1

rndis_host: add overflow check in rndis_rx_fixup()

In the Linux kernel, the following vulnerability has been resolved: rndis_host: add overflow check in rndis_rx_fixup() Add an overflow check to ensure that data_offset + data_len + 8 does not wrap, which would enable an OOB read of the USB data buffer.

• Обновитесь до 5.15.0-202.212~20.04.1

ALSA: dummy: Check card index validity at probe

In the Linux kernel, the following vulnerability has been resolved: ALSA: dummy: Check card index validity at probe snd_dummy_probe() blindly trusts that the given devptr->id value is within the proper card index range. It's OK for the devices the driver itself creates at the module probe time, but if the device is bound manually via sysfs interface, this could be -1 as "none", and this leads to OOB access for index[] and other parameters. Add a sanity check for the card index and warn/correct it if it's a value out of the range.

• Обновитесь до 5.15.0-202.212~20.04.1

ocfs2: fix missing metadata reservation for large xattrs

In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix missing metadata reservation for large xattrs [BUG] lsetxattr() panics the kernel when setting a large xattr value on a fragmented filesystem where the file already has an external xattr block. [CAUSE] ocfs2_calc_xattr_set_need() never reserves metadata blocks for a new xattr value's extent tree when the file already has an external xattr block. The not_found path leaves meta_add at zero, so meta_ac is NULL when ocfs2_xattr_extend_allocation() runs. A new value root has room for a single extent record. On a fragmented filesystem, the allocator cannot satisfy th

• Обновитесь до 5.15.0-202.212~20.04.1

ext4: stop retrying saturated xattr cache entries

In the Linux kernel, the following vulnerability has been resolved: ext4: stop retrying saturated xattr cache entries ext4_xattr_block_set() retries when a cache entry selected for reuse has a saturated reference count after taking the buffer lock. The retry returns to the mbcache lookup without making that entry ineligible, so it can select the same unusable entry indefinitely. A task spinning there can hold the parent directory's i_rwsem and leave concurrent rmdir callers blocked. Normally a reusable entry has a reference count below EXT4_XATTR_REFCOUNT_MAX because the count and MBE_REUSABLE_B are updated under the same buffer lock. A co

• Обновитесь до 5.15.0-202.212~20.04.1

nilfs2: reject invalid block index in GC ioctl

In the Linux kernel, the following vulnerability has been resolved: nilfs2: reject invalid block index in GC ioctl Syzbot reported list corruption caused by a double list_add_tail() call on bh->b_assoc_buffers within nilfs_lookup_dirty_data_buffers(). Analysis revealed that the root cause was the insertion of a page/folio with a page index of ULONG_MAX into the page cache via the GC ioctl. filemap_get_folios_tag(), called by nilfs_lookup_dirty_data_buffers(), repeatedly detects a dirty folio with a page index of ULONG_MAX due to index wrap-around, leading to duplicate processing of dirty buffers. As a preparatory step, the GC ioctl loads

• Обновитесь до 5.15.0-202.212~20.04.1

ext4: don't enable DAX on new encrypted files

In the Linux kernel, the following vulnerability has been resolved: ext4: don't enable DAX on new encrypted files Currently, when a new encrypted regular file is created, the call to ext4_set_inode_flags(inode, init=true) in __ext4_new_inode() is made before EXT4_INODE_ENCRYPT is set. As a result, it can set S_DAX if the filesystem is mounted with "-o dax=always". EXT4_INODE_ENCRYPT then actually gets set a bit later in __ext4_new_inode(), when it calls fscrypt_set_context() which calls ext4_set_context(). ext4_set_context() sets EXT4_INODE_ENCRYPT and calls ext4_set_inode_flags(inode, init=false) to set S_ENCRYPTED too. This was intend

• Обновитесь до 5.15.0-202.212~20.04.1

xfs: validate attr entry pointer before field access

In the Linux kernel, the following vulnerability has been resolved: xfs: validate attr entry pointer before field access xfs_attr3_leaf_verify_entry() accesses lentry/rentry fields (namelen, valuelen) before checking if the entry pointer itself is within bounds. If nameidx is crafted to point near the end of the buffer, these field accesses can read out-of-bounds before the bounds check at name_end > buf_end is performed. Add explicit bounds checks for entry pointers before accessing their fields. Use offsetof() to check that the start of the flexible array member (nameval/name) is within bounds, which ensures all preceding fields are safe

• Обновитесь до 5.15.0-202.212~20.04.1

nfc: digital: clamp SENSF_RES length to the destination buffer

In the Linux kernel, the following vulnerability has been resolved: nfc: digital: clamp SENSF_RES length to the destination buffer digital_in_recv_sensf_res() memcpy()s resp->len bytes from a remote NFC-F device response into the NFC_SENSF_RES_MAXSIZE-byte target.sensf_res field without an upper-bound check. A nearby malicious NFC-F device can send an oversized SENSF_RES response to overflow the stack-local struct nfc_target. Clamp resp->len to NFC_SENSF_RES_MAXSIZE before the copy. Found by 0sec automated security-research tooling (https://0sec.ai).

• Обновитесь до 5.15.0-202.212~20.04.1

nfc: fdp: bound the device-reported read length and fix an skb leak

In the Linux kernel, the following vulnerability has been resolved: nfc: fdp: bound the device-reported read length and fix an skb leak fdp_nci_i2c_read() takes the next packet length from two device-supplied bytes and never validates it. The value is a u16 used as the i2c_master_recv() count into a 261-byte on-stack buffer: a malicious, counterfeit or malfunctioning controller (or an i2c bus interposer) can drive it far past the buffer for a stack out-of-bounds write that clobbers the canary and return address, or below the minimum frame size (directly, or by truncating the computed sum) so the header/LRC strip and the next length read run

• Обновитесь до 5.15.0-202.212~20.04.1

nfc: microread: validate target discovery payload lengths

In the Linux kernel, the following vulnerability has been resolved: nfc: microread: validate target discovery payload lengths microread_target_discovered() parses target discovery payloads from skb->data according to the HCI gate. The fixed field offsets and UID copies were checked only against the destination nfc_target buffers, not against the actual skb length. Validate that each gate-specific payload contains the fixed fields and UID bytes before reading or copying them.

• Обновитесь до 5.15.0-202.212~20.04.1

nfc: llcp: bound the connect_sn TLV walk to the skb

In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: bound the connect_sn TLV walk to the skb Commit 27256cdb290e ("nfc: llcp: bound SNL TLV parsing to the skb and add length checks") fixed the unbounded TLV walk in nfc_llcp_recv_snl(), and commit d8bd2dedbde5 ("nfc: llcp: fix OOB read and u8 offset wrap in TLV parsers") subsequently bounded nfc_llcp_parse_gb_tlv() and nfc_llcp_parse_connection_tlv(). One sibling parser sharing the same pattern remains unbounded: nfc_llcp_connect_sn(). nfc_llcp_connect_sn() walks a TLV list, reading a two-byte header (type, length) followed by length bytes of value, without checki

• Обновитесь до 5.15.0-202.212~20.04.1

nfc: llcp: fix OOB read and u8 offset wrap in TLV parsers

In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: fix OOB read and u8 offset wrap in TLV parsers nfc_llcp_parse_gb_tlv() and nfc_llcp_parse_connection_tlv() contain three related bugs in their TLV parsing loops: 1. 'offset' is declared u8 but tlv_array_len is u16. When TLV data advances offset past 255 it silently wraps to zero, causing infinite loops or double-processing of buffer data. 2. Before reading tlv[0] (type) and tlv[1] (length) there is no check that offset+2 <= tlv_array_len. A truncated TLV causes an OOB read of one byte past the buffer end. 3. After reading the length field, the valu

• Обновитесь до 5.15.0-202.212~20.04.1