Уязвимости linux-ibm-5.15 · Страница 92

s390/zcrypt: Fix missing mem scrub at clear key import in cca_clr2cipherkey()

In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Fix missing mem scrub at clear key import in cca_clr2cipherkey() The helper function _ip_cprb_helper() uses internal buffer memory for building and processing CPRBs. After use this buffer was never scrubbed which could lead to leaving for example clear key material in memory which could be exposed via tricky reuse of this same memory. Extend the _ip_cprb_helper() function with another parameter 'scrub' used to steer scrubbing of this buffer. So now the caller has the opportunity to decide if scrubbing is needed or not. Extend the clear key to secure key token

• Обновитесь до 5.15.0-1111.115~20.04.1

can: j1939: transport: j1939_session_fresh_new(): initialize receive buffer

In the Linux kernel, the following vulnerability has been resolved: can: j1939: transport: j1939_session_fresh_new(): initialize receive buffer Zero the allocated buffer in j1939_session_fresh_new() to ensure it contains no residual data. While there is a potential performance impact if users allocate maximum sized ETP buffers, most real-world use cases are not noticeably affected since the maximum known buffer size is typically around 65K. [mkl: add Message-ID]

• Обновитесь до 5.15.0-1111.115~20.04.1

can: softing: fw_parse(): validate firmware record spans

In the Linux kernel, the following vulnerability has been resolved: can: softing: fw_parse(): validate firmware record spans fw_parse() reads a fixed record header, a firmware-provided payload, and a trailing checksum without knowing the end of the firmware blob. A truncated record can therefore make those reads exceed the blob. The same record also supplies addresses and lengths for writes into DPRAM. The generic loader uses wrap-prone mixed signed arithmetic for its bounds check, while the application loader does not bound the staging copy at all. Pass the firmware end to the parser and validate the full source record. Use a signed wide

• Обновитесь до 5.15.0-1111.115~20.04.1

drm/amd/display: use proper context for logging

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: use proper context for logging The same as the rest of the code, get_ss_info_from_atombios() uses calc_pll_cs->ctx->logger for logging. But calc_pll_cs->ctx is initialized only later in calc_pll_max_vco_construct(). Therefore, any output using DC_LOG_SYNC() leads to a NULL pointer deference in get_ss_info_from_atombios(). According to Sashiko, the very same problem exists in dce112_get_pix_clk_dividers() and dcn3_get_pix_clk_dividers() too. To avoid accessing the NULL context, use clk_src->base.ctx->logger everywhere. That context in base is initialized e

dmaengine: idxd: fix double free of wq, engine, and group structs

In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: fix double free of wq, engine, and group structs The release callbacks for wq, engine, and group devices (idxd_conf_wq_release, idxd_conf_engine_release, idxd_conf_group_release) each call kfree() on the enclosing struct. The setup error paths and cleanup functions also call kfree() explicitly after put_device(), producing a double free whenever put_device() drops the reference count to zero and fires the release. In the setup functions, device_initialize() is called before device_add(), so the reference count is exactly 1 at the error sites. put_device()

hwmon: (sht3x) Fix unaligned accesses

In the Linux kernel, the following vulnerability has been resolved: hwmon: (sht3x) Fix unaligned accesses Sashiko reports: In sht3x_update_client(), the 16-bit temperature and humidity values are extracted from a stack-allocated byte array using be16_to_cpup(). The pointers passed to this function are calculated as buf and buf + 3. Since the difference between the two pointers is an odd number of bytes, at least one of them is guaranteed to be at an unaligned offset. This will trigger an alignment fault on strict-alignment architectures such as ARMv5 or SPARC, resulting in a kernel panic. Fix the problem by using get_unaligned_be16() ins

net: ethernet: mtk_eth_soc: pass eth to mtk_handle_irq_rx in poll_controller

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: mtk_eth_soc: pass eth to mtk_handle_irq_rx in poll_controller mtk_handle_irq_rx expects a struct mtk_eth * (matching the request_irq cookie), but mtk_poll_controller incorrectly passed the net_device *. Calling ndo_poll_controller with CONFIG_NET_POLL_CONTROLLER enabled would then crash.

tracing/mmiotrace: Add NULL check for mmio_trace_array in logging functions

In the Linux kernel, the following vulnerability has been resolved: tracing/mmiotrace: Add NULL check for mmio_trace_array in logging functions mmio_trace_rw() and mmio_trace_mapping() retrieve mmio_trace_array into tr and pass it to __trace_mmiotrace_rw() and __trace_mmiotrace_map(). If these functions are invoked while mmio_trace_array is NULL (e.g. before initialization or after disabled), accessing tr->array_buffer.buffer will result in a NULL pointer dereference crash. Fix this by adding an explicit NULL check for tr at the beginning of __trace_mmiotrace_rw() and __trace_mmiotrace_map().

• Обновитесь до 5.15.0-1113.117~20.04.1

KVM: s390: pci: Fix NULL dereference on AIBV allocation failure

In the Linux kernel, the following vulnerability has been resolved: KVM: s390: pci: Fix NULL dereference on AIBV allocation failure The airq_iv_create() can return NULL on failure, but the return value was never checked. If it fails, zdev->aibv will be NULL and fail when dereferenced in kvm_zpci_set_airq(). Add a NULL check and free the previously allocated AISB bit and zdev->aisb on failure.

vxlan: re-fetch eth header after route_shortcircuit()

In the Linux kernel, the following vulnerability has been resolved: vxlan: re-fetch eth header after route_shortcircuit() Before route_shortcircuit(), the eth header pointer is cached from eth_hdr(skb). Inside route_shortcircuit(), pskb_may_pull() can be called, which may reallocate skb->head. In this case, returning to vxlan_xmit() leaves the cached eth pointer pointing to freed memory, leading to a use-after-free when dereferencing eth->h_dest. Fix this by updating eth = eth_hdr(skb) after calling route_shortcircuit().

• Обновитесь до 5.15.0-1111.115~20.04.1

i2c: amd-mp2: Unregister callback on adapter add failure

In the Linux kernel, the following vulnerability has been resolved: i2c: amd-mp2: Unregister callback on adapter add failure amd_mp2_register_cb() stores the platform I2C context in the MP2 PCI driver's callback table before the adapter is registered. If i2c_add_adapter() fails, probe returns and devres frees the context, but the PCI driver can still dereference the stale pointer from its IRQ and system-sleep callbacks. Unregister the callback before returning the adapter registration error.

• Обновитесь до 5.15.0-1111.115~20.04.1

s390/dasd: Fix potential NULL pointer dereference

In the Linux kernel, the following vulnerability has been resolved: s390/dasd: Fix potential NULL pointer dereference dasd_release_space() checks the implementation of the is_ese() discipline function before calling it to determine if a given device is an ESE DASD. The current usage of the logical AND operator will lead to a NULL pointer dereference as the function is called even if the function pointer is NULL. Fix this by using the logical OR operator.

• Обновитесь до 5.15.0-1111.115~20.04.1

i2c: imx: Fix slave registration race and error handling

In the Linux kernel, the following vulnerability has been resolved: i2c: imx: Fix slave registration race and error handling In i2c_imx_reg_slave(), the slave pointer was assigned before pm_runtime_resume_and_get(). If pm_runtime_resume_and_get() failed, the error path returned without clearing i2c_imx->slave, leaving it non-NULL and causing all subsequent registration attempts to fail with -EBUSY. Additionally, because this driver uses a shared IRQ, the interrupt handler i2c_imx_isr() can execute concurrently and, after acquiring slave_lock, dereference i2c_imx->slave. The previous fix attempt added a lockless i2c_imx->slave = NULL on t

• Обновитесь до 5.15.0-1113.117~20.04.1

driver core: use READ_ONCE() for dev->driver in dev_has_sync_state()

In the Linux kernel, the following vulnerability has been resolved: driver core: use READ_ONCE() for dev->driver in dev_has_sync_state() dev_has_sync_state() reads dev->driver twice without holding device_lock() -- once for the NULL check and once to dereference ->sync_state. Some callers only hold device_links_write_lock, which doesn't prevent a concurrent unbind from clearing dev->driver via device_unbind_cleanup(). Fix it by reading dev->driver exactly once with READ_ONCE(), pairing with the WRITE_ONCE() in device_set_driver().

• Обновитесь до 5.15.0-1111.115~20.04.1

Drivers: hv: vmbus: use generic driver_override infrastructure

In the Linux kernel, the following vulnerability has been resolved: Drivers: hv: vmbus: use generic driver_override infrastructure When a driver is probed through __driver_attach(), the bus' match() callback is called without the device lock held, thus accessing the driver_override field without a lock, which can cause a UAF. Fix this by using the driver-core driver_override infrastructure taking care of proper locking internally. Note that calling match() from __driver_attach() without the device lock held is intentional. [1]

perf sched: Fix register_pid() overflow, strcpy, and BUG_ON

In the Linux kernel, the following vulnerability has been resolved: perf sched: Fix register_pid() overflow, strcpy, and BUG_ON register_pid() has several issues when processing untrusted perf.data: 1. Integer overflow: (pid + 1) * sizeof(struct task_desc *) can wrap to a small value on 32-bit systems when pid is large (e.g. 0x40000000), causing realloc to return a tiny buffer followed by out-of-bounds writes in the initialization loop. 2. Heap buffer overflow: strcpy(task->comm, comm) copies the untrusted comm string into a fixed 20-byte COMM_LEN buffer with no length check. 3. BUG_ON on allocation failure: perf.data is u

• Обновитесь до 5.15.0-1113.117~20.04.1

perf tools: Use perf_env__get_cpu_topology() in machine__resolve()

In the Linux kernel, the following vulnerability has been resolved: perf tools: Use perf_env__get_cpu_topology() in machine__resolve() machine__resolve() accesses env->cpu[al->cpu].socket_id after checking al->cpu >= 0 and env->cpu != NULL, but without validating al->cpu against env->nr_cpus_avail. Since al->cpu comes from the untrusted perf.data sample, a crafted file with a large CPU index causes an out-of-bounds heap read. Use perf_env__get_cpu_topology() which validates both NULL and bounds. Also bounds-check al->cpu before the cast to struct perf_cpu (int16_t): without this, values like 65536 silently truncate to 0, bypassing the acc

bpf: Disable xfrm_decode_session hook attachment

In the Linux kernel, the following vulnerability has been resolved: bpf: Disable xfrm_decode_session hook attachment BPF LSM programs can currently attach to xfrm_decode_session(). That hook may return an error, but security_skb_classify_flow() calls it from a void path and triggers BUG_ON() if an error is returned. Disable BPF attachment to the hook to prevent a BPF LSM program from turning packet classification into a full panic.

netfilter: xt_nat: reject unsupported target families

In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_nat: reject unsupported target families xt_nat SNAT and DNAT target handlers assume IP-family conntrack state is present and can dereference a NULL pointer when instantiated from an unsupported family through nft_compat. A bridge-family compat rule can therefore trigger a NULL-dereference in nf_nat_setup_info(). Reject non-IP families in xt_nat_checkentry() so unsupported targets cannot be installed. Keep NFPROTO_INET allowed for valid inet NAT compat users and leave the runtime fast path unchanged. [ The crash was fixed via 9dbba7e694ec ("netfilter: nft_c

• Обновитесь до 5.15.0-1111.115~20.04.1

mmc: vub300: defer reset until cmd_mutex is unlocked

In the Linux kernel, the following vulnerability has been resolved: mmc: vub300: defer reset until cmd_mutex is unlocked vub300_cmndwork_thread() holds cmd_mutex while it sends a command and waits for the command response. If the response wait times out, __vub300_command_response() kills the command URBs and then synchronously resets the USB device through usb_reset_device(). That reset path re-enters the driver through vub300_pre_reset(), which also takes cmd_mutex. The worker therefore tries to acquire the same mutex recursively while it is still holding it from the command path. This issue was found by our static analysis tool and th

• Обновитесь до 5.15.0-1111.115~20.04.1