PatchFirst · Свежие уязвимости
За последние 30 дней в linux-xilinx-zynqmp опубликовано уязвимостей: 382; в каталоге KEV: 0.
Уязвимостей: 5327
In the Linux kernel, the following vulnerability has been resolved: media: mtk-mdp: Fix a reference leak bug in mtk_mdp_remove() In mtk_mdp_probe(), vpu_get_plat_device() increases the reference count of the returned platform device. Add platform_device_put() to prevent reference leak.
In the Linux kernel, the following vulnerability has been resolved: drm/atmel-hlcdc: fix memory leak from the atomic_destroy_state callback After several commits, the slab memory increases. Some drm_crtc_commit objects are not freed. The atomic_destroy_state callback only put the framebuffer. Use the __drm_atomic_helper_plane_destroy_state() function to put all the objects that are no longer needed. It has been seen after hours of usage of a graphics application or using kmemleak: unreferenced object 0xc63a6580 (size 64): comm "egt_basic", pid 171, jiffies 4294940784 hex dump (first 32 bytes): 40 50 34 c5 01 00 00 00 ff ff ff ff 8
In the Linux kernel, the following vulnerability has been resolved: hfsplus: pretend special inodes as regular files Since commit af153bb63a33 ("vfs: catch invalid modes in may_open()") requires any inode be one of S_IFDIR/S_IFLNK/S_IFREG/S_IFCHR/S_IFBLK/ S_IFIFO/S_IFSOCK type, use S_IFREG for special inodes.
In the Linux kernel, the following vulnerability has been resolved: EFI/CPER: don't go past the ARM processor CPER record buffer There's a logic inside GHES/CPER to detect if the section_length is too small, but it doesn't detect if it is too big. Currently, if the firmware receives an ARM processor CPER record stating that a section length is big, kernel will blindly trust section_length, producing a very long dump. For instance, a 67 bytes record with ERR_INFO_NUM set 46198 and section length set to 854918320 would dump a lot of data going a way past the firmware memory-mapped area. Fix it by adding a logic to prevent it to go past the
In the Linux kernel, the following vulnerability has been resolved: fbdev: of: display_timing: fix refcount leak in of_get_display_timings() of_parse_phandle() returns a device_node with refcount incremented, which is stored in 'entry' and then copied to 'native_mode'. When the error paths at lines 184 or 192 jump to 'entryfail', native_mode's refcount is not decremented, causing a refcount leak. Fix this by changing the goto target from 'entryfail' to 'timingfail', which properly calls of_node_put(native_mode) before cleanup.
In the Linux kernel, the following vulnerability has been resolved: gfs2: fiemap page fault fix In gfs2_fiemap(), we are calling iomap_fiemap() while holding the inode glock. This can lead to recursive glock taking if the fiemap buffer is memory mapped to the same inode and accessing it triggers a page fault. Fix by disabling page faults for iomap_fiemap() and faulting in the buffer by hand if necessary. Fixes xfstest generic/742.
In the Linux kernel, the following vulnerability has been resolved: media: cx88: Add missing unmap in snd_cx88_hw_params() In error path, add cx88_alsa_dma_unmap() to release resource acquired by cx88_alsa_dma_map().
In the Linux kernel, the following vulnerability has been resolved: wifi: libertas: fix WARNING in usb_tx_block The function usb_tx_block() submits cardp->tx_urb without ensuring that any previous transmission on this URB has completed. If a second call occurs while the URB is still active (e.g. during rapid firmware loading), usb_submit_urb() detects the active state and triggers a warning: 'URB submitted while active'. Fix this by enforcing serialization: call usb_kill_urb() before submitting the new request. This ensures the URB is idle and safe to reuse.
In the Linux kernel, the following vulnerability has been resolved: iommu/amd: move wait_on_sem() out of spinlock With iommu.strict=1, the existing completion wait path can cause soft lockups under stressed environment, as wait_on_sem() busy-waits under the spinlock with interrupts disabled. Move the completion wait in iommu_completion_wait() out of the spinlock. wait_on_sem() only polls the hardware-updated cmd_sem and does not require iommu->lock, so holding the lock during the busy wait unnecessarily increases contention and extends the time with interrupts disabled.
In the Linux kernel, the following vulnerability has been resolved: HID: prodikeys: Check presence of pm->input_ep82 Fake USB devices can send their own report descriptors for which the input_mapping() hook does not get called. In this case, pm->input_ep82 stays NULL, which leads to a crash later. This does not happen with the real device, but can be provoked by imposing as one.
In the Linux kernel, the following vulnerability has been resolved: usb: chipidea: udc: fix DMA and SG cleanup in _ep_nuke() The ChipIdea UDC driver can encounter "not page aligned sg buffer" errors when a USB device is reconnected after being disconnected during an active transfer. This occurs because _ep_nuke() returns requests to the gadget layer without properly unmapping DMA buffers or cleaning up scatter-gather bounce buffers. Root cause: When a disconnect happens during a multi-segment DMA transfer, the request's num_mapped_sgs field and sgt.sgl pointer remain set with stale values. The request is returned to the gadget driver with
In the Linux kernel, the following vulnerability has been resolved: 9p/xen: protect xen_9pfs_front_free against concurrent calls The xenwatch thread can race with other back-end change notifications and call xen_9pfs_front_free() twice, hitting the observed general protection fault due to a double-free. Guard the teardown path so only one caller can release the front-end state at a time, preventing the crash. This is a fix for the following double-free: [ 27.052347] Oops: general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b6b: 0000 [#1] SMP DEBUG_PAGEALLOC NOPTI [ 27.052357] CPU: 0 UID: 0 PID: 32 Comm: xenwatc
In the Linux kernel, the following vulnerability has been resolved: media: i2c/tw9906: Fix potential memory leak in tw9906_probe() In one of the error paths in tw9906_probe(), the memory allocated in v4l2_ctrl_handler_init() and v4l2_ctrl_new_std() is not freed. Fix that by calling v4l2_ctrl_handler_free() on the handler in that error path.
In the Linux kernel, the following vulnerability has been resolved: kcm: fix zero-frag skb in frag_list on partial sendmsg error Syzkaller reported a warning in kcm_write_msgs() when processing a message with a zero-fragment skb in the frag_list. When kcm_sendmsg() fills MAX_SKB_FRAGS fragments in the current skb, it allocates a new skb (tskb) and links it into the frag_list before copying data. If the copy subsequently fails (e.g. -EFAULT from user memory), tskb remains in the frag_list with zero fragments: head skb (msg being assembled, NOT yet in sk_write_queue) +-----------+ | frags[17] | (MAX_SKB_FRAGS, all filled with data)
In the Linux kernel, the following vulnerability has been resolved: ntb: ntb_hw_switchtec: Fix array-index-out-of-bounds access Number of MW LUTs depends on NTB configuration and can be set to MAX_MWS, This patch protects against invalid index out of bounds access to mw_sizes When invalid access print message to user that configuration is not valid.
In the Linux kernel, the following vulnerability has been resolved: drm/atmel-hlcdc: fix use-after-free of drm_crtc_commit after release The atmel_hlcdc_plane_atomic_duplicate_state() callback was copying the atmel_hlcdc_plane state structure without properly duplicating the drm_plane_state. In particular, state->commit remained set to the old state commit, which can lead to a use-after-free in the next drm_atomic_commit() call. Fix this by calling __drm_atomic_helper_duplicate_plane_state(), which correctly clones the base drm_plane_state (including the ->commit pointer). It has been seen when closing and re-opening the device node while
In the Linux kernel, the following vulnerability has been resolved: team: avoid NETDEV_CHANGEMTU event when unregistering slave syzbot is reporting unregister_netdevice: waiting for netdevsim0 to become free. Usage count = 3 ref_tracker: netdev@ffff88807dcf8618 has 1/2 users at __netdev_tracker_alloc include/linux/netdevice.h:4400 [inline] netdev_hold include/linux/netdevice.h:4429 [inline] inetdev_init+0x201/0x4e0 net/ipv4/devinet.c:286 inetdev_event+0x251/0x1610 net/ipv4/devinet.c:1600 notifier_call_chain+0x19d/0x3a0 kernel/notifier.c:85 call_netdevice_notifiers_mtu net/core/dev.c:2318 [inlin
In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_h323: fix OOB read in decode_choice() In decode_choice(), the boundary check before get_len() uses the variable `len`, which is still 0 from its initialization at the top of the function: unsigned int type, ext, len = 0; ... if (ext || (son->attr & OPEN)) { BYTE_ALIGN(bs); if (nf_h323_error_boundary(bs, len, 0)) /* len is 0 here */ return H323_ERROR_BOUND; len = get_len(bs); /* OOB read */ When the bitstream is exactly consumed (bs->cur == bs->end), the check nf_h323_error_boun
In the Linux kernel, the following vulnerability has been resolved: net: wan: farsync: Fix use-after-free bugs caused by unfinished tasklets When the FarSync T-series card is being detached, the fst_card_info is deallocated in fst_remove_one(). However, the fst_tx_task or fst_int_task may still be running or pending, leading to use-after-free bugs when the already freed fst_card_info is accessed in fst_process_tx_work_q() or fst_process_int_work_q(). A typical race condition is depicted below: CPU 0 (cleanup) | CPU 1 (tasklet) | fst_start_xmit() fst_remove_one() | tasklet_schedule() unregis
In the Linux kernel, the following vulnerability has been resolved: media: radio-keene: fix memory leak in error path Fix a memory leak in usb_keene_probe(). The v4l2 control handler is initialized and controls are added, but if v4l2_device_register() or video_register_device() fails afterward, the handler was never freed, leaking memory. Add v4l2_ctrl_handler_free() call in the err_v4l2 error path to ensure the control handler is properly freed for all error paths after it is initialized.
Сопоставьте установленный стек и версии со свежими базами уязвимостей.