PatchFirst · Свежие уязвимости
За последние 30 дней в linux-xilinx-zynqmp опубликовано уязвимостей: 464; в каталоге KEV: 0.
Уязвимостей: 5424
In the Linux kernel, the following vulnerability has been resolved: Input: soc_button_array - check btns_desc->package.count Check that btns_desc->package.count is not 0 before accessing btns_desc->package.elements[0].
In the Linux kernel, the following vulnerability has been resolved: Input: synaptics-rmi4 - fix GPF in suspend and resume when unbound Transport drivers (such as rmi_i2c and rmi_spi) invoke rmi_driver_suspend() and rmi_driver_resume() on their child rmi_dev device during system power management events. However, transport drivers are fully registered and operational even if the physical RMI driver failed to bind or probe the rmi_dev device. When rmi_driver_suspend() or rmi_driver_resume() is called on an unbound rmi_dev, dev_get_drvdata() returns NULL. Calling rmi_disable_irq() or rmi_enable_irq() without driver data attached causes a NULL
In the Linux kernel, the following vulnerability has been resolved: Input: zero ff_effect before compat copy in input_ff_effect_from_user In the compat path input_ff_effect_from_user() aliases the caller's native struct ff_effect with the smaller struct ff_effect_compat and copies only the compat sized prefix: compat_effect = (struct ff_effect_compat *)effect; if (copy_from_user(compat_effect, buffer, sizeof(struct ff_effect_compat))) The tail of the native structure is never written. Callers pass an uninitialized on-stack object, for example evdev_do_ioctl() for EVIOCSFF, so those bytes keep their previous stack contents. input_
In the Linux kernel, the following vulnerability has been resolved: hwmon: (w83791d) remove fan/pwm 4-5 sysfs group on remove When the fan/pwm 4-5 pins are not used as GPIO, w83791d_probe() creates the w83791d_group_fanpwm45 sysfs group on the I2C client device. The probe error path removes this group when a later initialization step fails, but the normal remove path only removes w83791d_group. As a result, the optional fan/pwm 4-5 sysfs files can remain after the driver is unbound. The callbacks associated with these files access the driver data, which is devm allocated and released after driver unbind. Leaving the sysfs files behind can
In the Linux kernel, the following vulnerability has been resolved: wifi: brcmsmac: fix UAF in brcms_free_timer() brcms_free_timer() calls brcms_del_timer() which uses the non-synchronous cancel_delayed_work() to cancel the timer's underlying delayed work. If the work callback (_brcms_timer) is already running, cancel_delayed_work() returns false without waiting, and brcms_free_timer() proceeds to kfree(t) while the callback still accesses t through container_of(). Add an explicit cancel_delayed_work_sync() after brcms_del_timer() to guarantee that any in-flight callback has completed before the timer structure is freed.
In the Linux kernel, the following vulnerability has been resolved: wifi: iwlegacy: fix broadcast stations deallocation On the error path of __il4965_up(), il_dealloc_bcast_stations() clears only IL_STA_UCODE_ACTIVE, leaving IL_STA_BCAST set. This causes the same broadcast stations to be deallocated again by __il4965_down(). This can occur when RF_KILL is toggled during driver startup. To fix clear the entire 'used' field, since we will not do any other operations on the station.
In the Linux kernel, the following vulnerability has been resolved: wifi: libertas_tf: fix UAF in lbtf_free_adapter() lbtf_free_adapter() calls lbtf_free_cmd_buffer() to free the command buffers before calling timer_delete_sync() to wait for the command timer callback. If the timer callback (command_timer_fn) is already running when lbtf_free_cmd_buffer() frees the command array, the callback dereferences priv->cur_cmd->cmdbuf which points to freed memory. Swap the order so that timer_delete_sync() runs first, ensuring any in-flight callback has completed before the command buffers are freed.
In the Linux kernel, the following vulnerability has been resolved: wifi: libipw: reject TKIP frames without a full MIC libipw_michael_mic_verify() assumes that an skb contains an eight-byte Michael MIC. A short TKIP frame makes the unsigned payload length wrap, causing michael_mic() to read past the skb. Check that the MIC is present before verifying it, and use the existing MICHAEL_MIC_LEN constant for all MIC lengths in the verifier.
In the Linux kernel, the following vulnerability has been resolved: wifi: wlcore: release runtime PM ref on regdomain config failure wlcore_regdomain_config() gets a runtime PM reference before sending the regulatory-domain command. When wlcore_cmd_regdomain_config_locked() fails, the function queues recovery and returns without dropping that reference. Release the reference after handling the command result so both success and failure paths balance the preceding pm_runtime_resume_and_get(). The recovery worker takes a separate runtime PM reference and cannot release the reference held here.
In the Linux kernel, the following vulnerability has been resolved: wifi: wilc1000: fix RX buffer OOB-write in wilc_wlan_handle_isr_ext() wilc_wlan_handle_isr_ext() takes the RX transfer size from the device-reported interrupt status register (a 15-bit field shifted left by 2, up to 131068 bytes) and reads that many bytes from the device into rx_buffer, which is only WILC_RX_BUFF_SIZE (96K) large. The wrap check only handles the current offset; the size itself is never compared against the buffer, so a bogus SDIO device can make the driver OOB-write rx_buffer by up to ~32K with data it controls. The oversized transfer also leaves rx_buffer
In the Linux kernel, the following vulnerability has been resolved: wifi: p54: validate curve data length in the calibration curve converters p54_convert_rev0() and p54_convert_rev1() read calibration curve data from the device-supplied EEPROM entry using channel and points-per-channel counts taken verbatim from that same entry, so an entry that declares more data than it carries drives an out-of-bounds read past the EEPROM buffer (verified with a KASAN reproducer of the conversion loop). The sibling converters p54_convert_output_limits() and p54_convert_db() already validate their counts against the entry length; this path was missed. Rej
In the Linux kernel, the following vulnerability has been resolved: wifi: p54: require a full exp_if record in PDR_INTERFACE_LIST The PDR_INTERFACE_LIST loop only checks that the record start is within the entry before reading an entire struct exp_if from it. A truncated trailing record makes the if_id/variant reads cross the entry boundary into the heap beyond the EEPROM buffer (verified with a KASAN reproducer of the loop). The variant also feeds the synth front-end selection, so this is not only a leak. Advance only while a full record still fits in the entry.
In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: bound the pairwise-cipher OUI walk to the IE length mwifiex_search_oui_in_ie() reads a pairwise-cipher (PTK) count from a beacon/probe-response RSN or WPA information element and then walks that many 4-byte OUIs, comparing each with memcmp(). The count comes straight from the (attacker-supplied) IE and is never checked against the element's own length, and the callers admit the element on element_id alone (has_ieee_hdr() / has_vendor_hdr(), no length check). A crafted RSN/WPA IE with a large pairwise count therefore makes the walk read up to 255 * 4 bytes pas
In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: validate scan response extents mwifiex_ret_802_11_scan() subtracts the fixed response fields and the firmware-provided BSS length from resp->size without first proving that either extent fits. A short response or oversized BSS length can therefore underflow tlv_buf_size and make the TLV parser walk beyond the command response. Compute the fixed extent from the selected normal or background scan response. Validate that the fixed fields and BSS data fit before deriving the TLV extent and entering the parser.
In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: refuse to make a monitor active when it has no queue A monitor interface only gets a TXQ if it's created active, and one can't be added later. Setting the flag on a down interface is still allowed, so the driver is handed a monitor with no queue. ath9k dereferences it: BUG: kernel NULL pointer dereference, address: 0000000000000066 RIP: 0010:ath_tx_node_init+0x49/0x170 [ath9k] ath9k_add_interface+0x10c/0x140 [ath9k] drv_add_interface+0x54/0x250 [mac80211] ieee80211_do_open+0x32f/0x800 [mac80211] Reached with CAP_NET_ADMIN by "iw dev X set moni
In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Avoid integer underflow in EOP ring size calculation. The low 6 bits of cp_hqd_eop_control store the base-2 logarithm of the EOP ring size. This was calculated as order_base_2(q->eop_ring_buffer_size / 4) - 1 But order_base_2 can in theory return 0, so this could underflow (although in practice the ring buffer size cannot be less than 4096). Change this to order_base_2(q->eop_ring_buffer_size / 8) using properties of logarithms. Also add to the above comment to make the mathematics more clear. (cherry picked from commit f0f43fcf8b2b3a924cad9444340921c96ed
In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Avoid integer underflow with ffs in EOP ring size calc The low 6 bits of cp_hqd_eop_control store the base-2 logarithm of the EOP ring size. This was calculated as ffs(q->eop_ring_buffer_size / sizeof(unsigned int)) - 1 - 1 But ffs can in theory return 1 or 0, so this could underflow (although in practice the ring buffer size cannot be less than 4096). Change this to ffs(q->eop_ring_buffer_size / sizeof(unsigned int) / 4) using properties of logarithms. (cherry picked from commit 4f18c56630383c14bfc6b2d65f88f2f895d2121a)
In the Linux kernel, the following vulnerability has been resolved: smb: client: cancel reconnect work in clean_demultiplex_info() clean_demultiplex_info() cancels server->echo delayed work but not server->reconnect, which can cause a use-after-free when the demultiplex thread exits while a reconnect work is still queued: cifs_demultiplex_thread() cifs_readv_from_socket() cifs_reconnect() __cifs_reconnect() cifs_queue_server_reconn() mod_delayed_work(cifsiod_wq, &server->reconnect, 0) clean_demultiplex_info() cancel_delayed_work_sync(&server->echo) // echo canceled
In the Linux kernel, the following vulnerability has been resolved: smb: client: fix rlist race and missing initialization TCP_Server_Info.rlist is allocated via kzalloc which zeros both ->next and ->prev to NULL instead of pointing to itself, making list_empty() always return false and list_add() dereference a NULL ->prev pointer. Also, cifs_signal_cifsd_for_reconnect() can be called concurrently from multiple cifsd threads, allowing the same server's rlist node to be added twice into the local list, corrupting it.
In the Linux kernel, the following vulnerability has been resolved: smb: client: fix smbd_connection leak on cifs_get_tcp_session() error When an RDMA connection is successfully established via smbd_get_connection() but cifs_get_tcp_session() later fails (e.g. kthread_create() returns an error), the error path frees tcp_ses without first destroying the smbd_connection. Fix this by calling smbd_destroy() in the out_err cleanup path before kfree(tcp_ses). smbd_destroy() safely handles the case where smbd_conn is NULL, so it can be called unconditionally.
Сопоставьте установленный стек и версии со свежими базами уязвимостей.