PatchFirst · Свежие уязвимости
За последние 30 дней в linux-fips опубликовано уязвимостей: 318; в каталоге KEV: 0.
Уязвимостей: 5342
In the Linux kernel, the following vulnerability has been resolved: isofs: release zisofs block pointer buffer head zisofs_fill_pages() reads the compressed block pointer table. The error paths release the current buffer_head, the loop also releases the old buffer_head when it advances. However, the success path leaves the last buffer_head referenced. Release it before returning success.
In the Linux kernel, the following vulnerability has been resolved: spi: oc-tiny: switch to managed controller allocation The controller is allocated with the non-managed spi_alloc_host() while the interrupt is registered with devm_request_irq(). During removal, spi_bitbang_stop() only unregisters the controller; the subsequent spi_controller_put() then frees the controller together with its embedded driver-private devdata, which is the IRQ handler's dev_id. The devm_request_irq() release action (free_irq()), which drains the handler, does not run until after .remove() returns. A late or latched interrupt can therefore reach tiny_spi_irq
In the Linux kernel, the following vulnerability has been resolved: remoteproc: Prevent crash handling to race with rproc_del() There's no synchronization between rproc_crash_handler_work() and rproc_del(), as such it's possible for a driver to be removed while crash-handler work is scheduled, or even executing - resulting in use-after-free issues. To avoid this the scheduled work need to be cancelled and synchronized against before the removal proceeds. In order to ensure that this doesn't race with the reporting, and thereby scheduling new work, a "deleting" flag is introduced. This is similar to the RPROC_DELETE state that was introduc
In the Linux kernel, the following vulnerability has been resolved: PCI: Fix UAF when probe runs concurrent to dyn ID removal Dynamic IDs are only guaranteed to be valid when dynids.lock is held, as remove_id_store() can free the node. Thus, make a copy in pci_match_device(). Also, clarify that the id parameter is only valid during probe.
In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix infinite loop in nilfs_clean_segments() syzbot reported a hung task in nilfs_transaction_begin(). This occurs because the cleaner ioctl falls into an infinite loop if nilfs_segctor_construct() repeatedly returns -EROFS (e.g. the device is remounted as read-only after an I/O error). Currently in nilfs_clean_segments(), if err is non-zero, it logs the error and sleeps but doesn't abort when it encounters a terminal error like -EROFS. This causes the thread to loop forever. Fix this by breaking out of the loop if nilfs_segctor_construct() returns -EROFS. This mat
In the Linux kernel, the following vulnerability has been resolved: nilfs2: prevent out-of-bounds read in super root block parsing super-root inode metadata size is trusted before nilfs_read_inode_common(). Reject super-root inode sizes whose computed on-disk footprint exceeds the filesystem block size. This prevents malformed filesystem images from making nilfs_read_inode_common() read past the end of the super-root block. [ryusuke: clarify the commit title]
In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix BUG in nilfs_copy_dirty_pages() on dirty state mismatch Syzbot reported a kernel BUG triggered within nilfs_copy_dirty_pages(), which copies dirty DAT file folios/pages to its shadow page cache. The BUG occurs when a retrieved dirty folio/page unexpectedly loses its 'dirty' status. This issue arises because, since the commit referenced below, the 'dirty' flag of a folio/page can be cleared asynchronously after the filesystem detects metadata corruption and transitions to read-only mode. Resolve the issue by returning an -EROFS error if the filesystem has tran
In the Linux kernel, the following vulnerability has been resolved: RDMA/cxgb4: free STAG index when TPT entry write fails write_tpt_entry() allocates a new STAG index with c4iw_get_resource() and bumps stats.stag.cur before programming the entry. When write_adapter_mem() fails, it returns the error without releasing the index or reversing the statistic. No MR is inserted into rhp->mrs, so deregistration never reclaims it, leaking the index until device teardown. Record whether this call allocated the index and, on a failed write, return it to tpt_table and decrement stats.stag.cur. Key the rollback on both the write error and that flag
In the Linux kernel, the following vulnerability has been resolved: IB/isert: reject PDUs declaring more data than was received isert_recv_done() hands each received PDU to the opcode handlers without ever looking at wc->byte_len, the number of bytes the HCA actually placed in the receive descriptor. The handlers then copy that many bytes - the data-segment length the initiator declared in the BHS (ntoh24(hdr->dlength), via the derived unsol_data_len / imm_data_len) - out of the fixed-size descriptor: isert_handle_iscsi_dataout(): sg_copy_from_buffer(sg_start, sg_nents, isert_get_data(rx_desc), unsol_d
In the Linux kernel, the following vulnerability has been resolved: IB/isert: reject login PDUs declaring more data than was received isert_login_recv_done() records how many bytes the HCA actually placed in the login buffer, but nothing compares that against the length the login PDU's BHS declares. isert_rx_login_req() copies min(login_req_len, MAX_KEY_VALUE_PAIRS) bytes into login->req_buf, and the login code then reads the declared length back out of that buffer - for the first PDU in iscsi_target_locate_portal(), payload_length = ntoh24(login_req->dlength); tmpbuf = kmemdup_nul(login->req_buf, payload_length, GFP_KERNEL); and for t
In the Linux kernel, the following vulnerability has been resolved: spi: davinci: switch to managed controller allocation The controller is allocated with the non-managed spi_alloc_host() while the interrupt is registered with devm_request_threaded_irq(). During removal, spi_bitbang_stop() only unregisters the controller; the subsequent spi_controller_put() then frees the controller together with its embedded davinci_spi devdata, which is the IRQ handler's dev_id. The devm_request_threaded_irq() release action (free_irq()), which drains the handler, does not run until after .remove() returns. A late or latched interrupt can therefore reac
In the Linux kernel, the following vulnerability has been resolved: wifi: rtlwifi: pci: fix error path in rtl_pci_probe() In the last error path in rtl_pci_probe(), the cleanup functions are skipped due to a wrong goto label. Moreover, the successful call to rtl_init_rfkill(), ieee80211_register_hw(), rtl_debug_add_one() have to be reverted. Fix this issue by updating the labels and adding the relevant cleanup functions to the last error path.
In the Linux kernel, the following vulnerability has been resolved: power: supply: isp1704_charger: cancel work on remove The USB notifier and initial VBUS detection can schedule isp->work. The remove path unregisters the notifier and power supply, but does not wait for queued or running work before tearing down the power supply state. Cancel the work after unregistering the notifier. Do this before unregistering the power supply. This issue was found by a static analysis tool.
In the Linux kernel, the following vulnerability has been resolved: misc: sgi-gru: remove interrupt-context page-table walks The GRU TLB miss handler walks a process's page tables without holding page-table locks or a reference to the mapped page. It also uses a kernel page-table accessor on user page tables and supports only PMD-level large mappings on x86-64. Remove the direct walker. Send interrupt faults directly to user polling mode so the existing call-OS fallback retries them in process context. Remove the mmap-lock failure statistic that can no longer be incremented.
In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: fix P2P action frame handling without device vif Some P2P action frame paths assume the P2P device vif is always available. That is not true when userspace sends non-P2P public action frames through the primary interface, or when action-frame abort runs after the P2P device vif has not been created. Fall back to the primary vif when aborting an action frame without a P2P device vif, and guard P2P device saved IE access before using it for peer channel search.
In the Linux kernel, the following vulnerability has been resolved: serial: core: do fallible allocations before the console can be registered serial_core_add_one_port() allocates uport->tty_groups after uart_configure_port(), which may register the console. If the allocation fails, the driver unwinds the port while its console remains registered. The earlier uport->name allocation has a related failure path that leaves state->uart_port linked to a port being freed. Failslab reproduced a NULL dereference in PL011 console output and a KASAN use-after-free in i.MX console output after failed binds. Allocate the name and tty_groups before li
In the Linux kernel, the following vulnerability has been resolved: serial: core: clear freed pointers on uart_register_driver() failure uart_register_driver() leaves drv->state pointing to freed memory when tty_alloc_driver() fails. If tty_register_driver() fails, drv->tty_driver also retains a pointer after its reference is dropped. Drivers that use drv->state as an "already registered" flag can then skip registration on the next probe and pass the freed state to uart_add_one_port(). This issue was found with failslab on QEMU's raspi1ap board by failing registration and binding the PL011 port again. Clear both pointers on their failure
In the Linux kernel, the following vulnerability has been resolved: tty: skip cdev_del() when no cdev is registered TTY device registration can fail before a cdev is allocated. Serial core keeps the port so setserial can still use it, and later removal passes the NULL cdev slot to cdev_del(), causing a NULL-pointer dereference. Only delete the cdev when the slot is not NULL.
In the Linux kernel, the following vulnerability has been resolved: tty: clear cdev pointer after cdev_add() failure tty_cdev_add() drops the cdev reference when cdev_add() fails, but leaves driver->cdevs[index] pointing to freed memory. tty_unregister_device() later passes that stale pointer to cdev_del(), causing a use-after-free. Clear the slot after dropping the reference.
In the Linux kernel, the following vulnerability has been resolved: HID: synchronize input before cleaning up a failed probe hid_device_io_start() allows reports to run concurrently with probe. If the probe subsequently fails, __hid_device_probe() releases driver resources and clears hdev->driver without first excluding those report callbacks. For example, a report may enter hidraw_report_event() while the failure path frees the associated hidraw object, leading to a use-after-free when the report takes the object's list lock. Stop input before performing failed-probe cleanup. This reacquires driver_input_lock and waits for any report cal
Сопоставьте установленный стек и версии со свежими базами уязвимостей.