Без оценкиEPSS 0,22%Нет опубликованного исправления
HID: picolcd: clamp eeprom debugfs read to bytes actually received
In the Linux kernel, the following vulnerability has been resolved:
HID: picolcd: clamp eeprom debugfs read to bytes actually received
picolcd_debug_eeprom_read() trusts resp->raw_data[2] -- a length byte
supplied by the device in its REPORT_EE_DATA reply -- clamped only to
the caller's read() count:
ret = resp->raw_data[2];
if (ret > s)
ret = s;
if (copy_to_user(u, resp->raw_data+3, ret))
It never checks resp->raw_size, the number of bytes picolcd_raw_event()
actually copied into the 64-byte raw_data[] of the kmalloc'd struct
picolcd_pending. A device (or a spoofed picoLCD) returning a length byte
of 0xff, read with a count >= 255,
Без оценкиEPSS 0,22%Нет опубликованного исправления
HID: roccat: free buffered reports when destroying device
In the Linux kernel, the following vulnerability has been resolved:
HID: roccat: free buffered reports when destroying device
roccat_report_event() duplicates each report with kmemdup() and stores
the allocation in a circular-buffer slot. The allocation is released only
when that slot is reused.
The device destruction paths free struct roccat_device without releasing
reports still stored in cbuf[]. This makes those allocations unreachable
and leaks up to ROCCAT_CBUF_SIZE report buffers per device.
Add a small destructor that frees every buffered report before freeing the
device, and use it in both paths that can destroy a registered devic
Высокий · CVSS 8.8EPSS 0,35%Нет опубликованного исправления
HID: sensor: custom: Fix field sysfs group cleanup on failure
In the Linux kernel, the following vulnerability has been resolved:
HID: sensor: custom: Fix field sysfs group cleanup on failure
hid_sensor_custom_add_attributes() creates one sysfs group for each
custom sensor field. If sysfs_create_group() fails after some groups
have already been created, the function returns the error without
removing the previously created groups.
Add a local unwind path to remove the groups that were already created.
With enable_sensor exposed only after the field attributes are ready,
this path can free sensor_inst->fields without leaving enable_sensor
able to access pointers into that array.
Средний · CVSS 5.4EPSS 0,21%Нет опубликованного исправления
HID: mcp2221: stop device IO before hid_hw_stop
In the Linux kernel, the following vulnerability has been resolved:
HID: mcp2221: stop device IO before hid_hw_stop
Quiesce device IO at the start of the devm cleanup callback
mcp2221_hid_unregister() so that incoming HID reports cannot race with
hardware teardown during probe failure or device removal, addressing a
potential use-after-free.
Guard the call to hid_device_io_stop() with io_started. On normal
removal hid_device_remove() has already cleared io_started before the
devres group is released, so an unconditional call would otherwise hit
the !io_started path and emit a spurious "io already stopped" warning
on every removal. The guar
Высокий · CVSS 7.8EPSS 0,18%Нет опубликованного исправления
ecryptfs: hold msg ctx list lock when cleaning daemon queue
In the Linux kernel, the following vulnerability has been resolved:
ecryptfs: hold msg ctx list lock when cleaning daemon queue
ecryptfs_exorcise_daemon() drops queued messages from a dying daemon
without holding ecryptfs_msg_ctx_lists_mux, but
ecryptfs_msg_ctx_alloc_to_free() requires that lock.
Take the list lock while moving the queued contexts back to the free
list to avoid racing with other global msg ctx list users.
Высокий · CVSS 7.1EPSS 0,16%Нет опубликованного исправления
ecryptfs: pass packet set buffer size to parser
In the Linux kernel, the following vulnerability has been resolved:
ecryptfs: pass packet set buffer size to parser
ecryptfs_parse_packet_set() receives a pointer into the file header, but
it calculates the remaining packet buffer size from PAGE_SIZE - 8. For
version 1 headers the packet set starts later in the header, so this can
overstate the available buffer.
Pass the actual packet set buffer length from the caller and calculate
per-packet limits from the remaining bytes in that buffer. Recompute the
remaining length after consuming a tag 3 packet before parsing the
following tag 11 packet.
Высокий · CVSS 7.8EPSS 0,17%Нет опубликованного исправления
ecryptfs: reject oversized encrypted_key_size in parse_tag_3_packet
In the Linux kernel, the following vulnerability has been resolved:
ecryptfs: reject oversized encrypted_key_size in parse_tag_3_packet
parse_tag_3_packet() set encrypted_key_size from the Tag 3 packet body
without bounding it against ECRYPTFS_MAX_KEY_BYTES (64). When
encrypted_key_size > 64, decrypt_passphrase_encrypted_session_key()
sets decrypted_key_size = encrypted_key_size and performs two
out-of-bounds writes:
1. crypto_skcipher_decrypt() writes encrypted_key_size bytes into
decrypted_key[64] via scatterlist, overflowing into the parent
ecryptfs_auth_tok struct.
2. memcpy(crypt_stat->key, decrypted_key, decrypted_key_size) wri
Высокий · CVSS 7.8EPSS 0,14%Нет опубликованного исправления
ecryptfs: reject too-small tag 70 packets
In the Linux kernel, the following vulnerability has been resolved:
ecryptfs: reject too-small tag 70 packets
ecryptfs_parse_tag_70_packet() subtracts fixed metadata fields from the
parsed packet body size to derive the encrypted filename size. A
malformed packet with a body smaller than those fixed fields can underflow
that size calculation.
Reject tag 70 packets before the subtraction unless the body contains the
signature, cipher code, and at least one byte of encrypted filename data.
Высокий · CVSS 7.8EPSS 0,17%Нет опубликованного исправления
ecryptfs: release message context on send failure
In the Linux kernel, the following vulnerability has been resolved:
ecryptfs: release message context on send failure
ecryptfs_send_message_locked() moves a message context from the free
list to the allocated list before sending the request to the userspace
daemon.
If ecryptfs_send_miscdev() fails, the context is left on the
allocated list and cannot be reused. Move it back to the free list on
failure and clear the caller's pointer.
Высокий · CVSS 8.8EPSS 0,65%Нет опубликованного исправления
ext2: Fix lost inode updates for IS_SYNC inodes
In the Linux kernel, the following vulnerability has been resolved:
ext2: Fix lost inode updates for IS_SYNC inodes
ext2_setsize() and ext2_xattr_set2() had a construct like:
if (IS_SYNC(inode)) {
sync_inode_metadata(inode, 1);
} else {
mark_inode_dirty(inode);
}
which leads to lost inode updates for IS_SYNC inodes because
sync_inode_metadata() does anything only if the inode is already dirty
and hence inode updates may be simply lost. Fix the problem by
unconditionally marking the inode dirty and *then* call
sync_inode_metadata().
Средний · CVSS 6.8EPSS 0,17%Нет опубликованного исправления
fbdev: ssd1307fb: defer I2C transfers from damage callbacks
In the Linux kernel, the following vulnerability has been resolved:
fbdev: ssd1307fb: defer I2C transfers from damage callbacks
The fbdev damage callbacks may run from fbcon while printk has disabled
preemption. They currently update the display synchronously, which enters
the sleeping I2C transfer path from atomic context.
A complete report from an RK3566 system follows:
[ 258.129004] watchdog: watchdog0: watchdog did not stop!
[ 258.129067] BUG: scheduling while atomic: systemd/1/0x00000003
[ 258.129076] Modules linked in: algif_hash algif_skcipher af_alg bnep
binfmt_misc lz4hc lz4 zram snd_soc_hdmi_codec brcmfmac_wcc hci_ua
Высокий · CVSS 7.8EPSS 0,17%Нет опубликованного исправления
fbdev: uvesafb: unregister connector callback on init failure
In the Linux kernel, the following vulnerability has been resolved:
fbdev: uvesafb: unregister connector callback on init failure
uvesafb_init() registers the v86d connector callback before registering
the platform driver. If platform_driver_register() fails, the function
returns the error directly and leaves the connector callback registered.
The later platform-device failure path already unregisters the callback.
Add the same cleanup before the final return when platform-driver
registration fails.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code.
Высокий · CVSS 7.1EPSS 0,18%Нет опубликованного исправления
forcedeth: fix off-by-one when saving/restoring non-PCI config space
In the Linux kernel, the following vulnerability has been resolved:
forcedeth: fix off-by-one when saving/restoring non-PCI config space
nv_suspend() and nv_resume() walk the non-PCI configuration space with
for (i = 0; i <= np->register_size/sizeof(u32); i++)
which runs one iteration too many. saved_config_space is declared as
u32 saved_config_space[NV_PCI_REGSZ_MAX/4];
and NV_PCI_REGSZ_VER3 is equal to NV_PCI_REGSZ_MAX (0x604), so on a VER3
device register_size/sizeof(u32) is exactly the array length and the last
iteration addresses one element past the end.
The element it lands on is np->name_rx[0..3]: saved_config_space[] is
foll
Без оценкиEPSS 0,22%Нет опубликованного исправления
fsnotify: Fix stale object mask after concurrent mark updates
In the Linux kernel, the following vulnerability has been resolved:
fsnotify: Fix stale object mask after concurrent mark updates
When a mark gets a new event bit, fanotify and inotify may avoid
recalculating the object mask if the cached aggregate already contains that
bit. This is racy with a recalculation triggered by a concurrent update to
another mark on the same connector.
The concurrent scan can read the mark before the new bit is added, while
the updater reads the old aggregate before that scan publishes its result.
The updater then skips recalculation and the scan publishes a mask without
the bit, leaving the object mask stale aft
Без оценкиEPSS 0,18%Нет опубликованного исправления
bnx2x: fix double free in bnx2x_init_firmware() error path
In the Linux kernel, the following vulnerability has been resolved:
bnx2x: fix double free in bnx2x_init_firmware() error path
bnx2x_init_firmware() frees bp->init_ops, bp->init_data and
bp->init_ops_offsets in its error path without setting them to NULL.
The cleanup function bnx2x_release_firmware() frees the same three
pointers unconditionally, so if init_firmware fails and
release_firmware is later called (e.g. from __bnx2x_remove or through
the function state machine), all three are freed a second time.
Set each pointer to NULL after kfree() in the error path so that the
subsequent kfree(NULL) in bnx2x_release_firmware() is a safe no-o
Без оценкиEPSS 0,22%Нет опубликованного исправления
dm-era: fix shadowed superblock leak on take-snap failure
In the Linux kernel, the following vulnerability has been resolved:
dm-era: fix shadowed superblock leak on take-snap failure
metadata_take_snap() bumps the live superblock refcount and then
dm_tm_shadow_block() allocates a new block for the metadata snapshot.
If the subsequent dm_sm_inc_block() of writeset_tree_root or
era_array_root fails, the function only unlocks the clone and
returns. The newly allocated shadow block is never returned to the
metadata space map, so each failed take-snap permanently leaks one
metadata block.
Free the clone with dm_sm_dec_block() on those error paths, matching
the final step of metadata_drop_snap().
Без оценкиEPSS 0,23%Нет опубликованного исправления
dm raid1: reserve space for NUL-terminator in build_constructor_string()
In the Linux kernel, the following vulnerability has been resolved:
dm raid1: reserve space for NUL-terminator in build_constructor_string()
Reserve space for the termination NUL after the maximum 20 decimal
digits of a long long value to avoid buffer overflow in sprintf().
Высокий · CVSS 7.8EPSS 0,17%Нет опубликованного исправления
dm array: validate array block headers on read
In the Linux kernel, the following vulnerability has been resolved:
dm array: validate array block headers on read
array_block_check() validates blocknr and csum and nothing else, while
node_check(), next to it, has bounded the structural fields since both
were written. dm_array_cursor_next() takes its loop bound from the
on-disk nr_entries and element_at() is unguarded pointer arithmetic, so
a count larger than the block holds keeps the cursor in one block while
the index grows past it and the read walks off the dm-bufio buffer --
dm_cache_load_mappings() drives it once per cache block at activation.
Check the header against itself: rejec
Высокий · CVSS 7.8EPSS 0,13%Нет опубликованного исправления
dm array: reject an array block whose value size is not the caller's
In the Linux kernel, the following vulnerability has been resolved:
dm array: reject an array block whose value size is not the caller's
array_block_check() can only compare the header against itself, so a block
with value_size 4 and max_entries 1018 is internally consistent and passes.
dm-cache keeps two arrays -- mappings at 8 bytes and hints at 4 -- and the
roots for both live in the superblock. Point the mappings root at a hint
block and __load_mappings() walks it through an info whose value size is 8,
so element_at() strides 8 bytes over 4-byte entries and reaches offset 8160
of a 4096-byte block.
get_ablock() and __shadow_ablock() ar
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: serialize security confirmation handling
rfcomm_security_cfm() looks up a session on session_list and then walks
its DLC list without holding rfcomm_mutex. Since RFCOMM session teardown
uses rfcomm_mutex, krfcommd can close and free the same session and DLCs
concurrently:
hci_rx_work krfcommd
----------- ---------
rfcomm_session_get()
rfcomm_lock()
rfcomm_session_close()
rfcomm_dlc_unlink()