Высокий · CVSS 8.4EPSS 0,14%Нет опубликованного исправления
power: supply: cros_usbpd: Limit port counts to EC_USB_PD_MAX_PORTS
In the Linux kernel, the following vulnerability has been resolved:
power: supply: cros_usbpd: Limit port counts to EC_USB_PD_MAX_PORTS
Currently the cros_usbpd-charger driver probe iterates based on raw
charger port count returned by the embedded controller. The only check
is against the number of USB PD ports which the embedded controller
also defines. A malicious embedded controller could return an inaccurate
port count (up to 255) resulting in an out of bounds write and
subsequent memory corruption.
Update helper functions in cros_usbpd-charger to limit port counts to
EC_USB_PD_MAX_PORTS.
Высокий · CVSS 8.4EPSS 0,14%Нет опубликованного исправления
power: supply: lp8727: fix use-after-free in lp8727_release_irq()
In the Linux kernel, the following vulnerability has been resolved:
power: supply: lp8727: fix use-after-free in lp8727_release_irq()
lp8727_isr_func(), the threaded IRQ handler, is the only caller that arms
pchg->work via schedule_delayed_work(). lp8727_release_irq() currently
cancels the work before freeing the IRQ, so an IRQ delivered in between
can re-arm the work through the threaded handler. After .remove returns
the devm layer frees pchg while lp8727_delayed_func() may still run and
dereference it.
Free the IRQ first so the threaded handler is quiesced and can no longer
queue work, then cancel the delayed work to drain the final g
Без оценкиEPSS 0,17%Нет опубликованного исправления
power: supply: lp8788-charger: fix use-after-free on remove
In the Linux kernel, the following vulnerability has been resolved:
power: supply: lp8788-charger: fix use-after-free on remove
lp8788_charger_remove() flushes charger_work before unregistering the
IRQs. An IRQ thread can queue charger_work after flush_work() has
returned. The work can then run after devres frees pchg and dereference
it in lp8788_charger_event().
Unregister the IRQs first. free_irq() waits for any running threaded
handler, so no handler can queue more work afterwards. Then use
cancel_work_sync() to cancel pending work or wait for running work to
finish.
This issue was found by an in-house static analysis tool.
Высокий · CVSS 8.4EPSS 0,14%Нет опубликованного исправления
power: supply: rt9455: quiesce delayed work before teardown
In the Linux kernel, the following vulnerability has been resolved:
power: supply: rt9455: quiesce delayed work before teardown
The threaded IRQ handler can queue pwr_rdy_work,
max_charging_time_work and batt_presence_work. pwr_rdy_work and
batt_presence_work can also queue max_charging_time_work, while
batt_presence_work can requeue itself.
rt9455_remove() cancels max_charging_time_work before
batt_presence_work. The latter can therefore queue
max_charging_time_work after it has already been cancelled:
rt9455_remove() workqueue
cancel pwr_rdy_work
cancel max_charging_time_work
Без оценкиEPSS 0,17%Нет опубликованного исправления
power: supply: twl4030_charger: cancel workers via devm
In the Linux kernel, the following vulnerability has been resolved:
power: supply: twl4030_charger: cancel workers via devm
bci is devm-allocated. Two workers (bci->work and bci->current_worker)
dereference it. twl4030_bci_remove() disables charging and masks
interrupts. It cancels neither worker. A worker pending at remove() can
run after devm frees bci.
The USB transceiver comes from devm_usb_get_phy_by_node(). devm
unregisters its notifier only after remove() returns. A cancel_work_sync()
in remove() can then race a notifier reschedule. devm_work_autocancel()
and devm_delayed_work_autocancel() avoid that. They cancel the workers
during
In the Linux kernel, the following vulnerability has been resolved:
power: supply: max17040: propagate register read errors
max17040_get_vcell() and max17040_get_soc() ignore errors returned by
regmap_read(). When an I2C transfer fails, the uninitialized register
value is converted and reported to userspace as a valid voltage or state
of charge. The polling worker can also replace the cached state of charge
with the bogus value and emit a spurious change event.
Propagate read errors through the power supply get_property callback and
keep the last valid cached state of charge when polling fails.
Без оценкиEPSS 0,22%Нет опубликованного исправления
power: supply: max17040: synchronize work cancellation on suspend
In the Linux kernel, the following vulnerability has been resolved:
power: supply: max17040: synchronize work cancellation on suspend
max17040_work() requeues itself after every poll. cancel_delayed_work()
only cancels a pending instance and does not wait for a callback that is
already running.
If system suspend races with the polling callback, the callback can
continue accessing the fuel gauge and requeue itself after the suspend
callback returns.
Use cancel_delayed_work_sync() to ensure polling is quiesced before
suspend completes.
Без оценкиEPSS 0,18%Нет опубликованного исправления
s390/dasd: Do not complete a failed ESE read as successful
In the Linux kernel, the following vulnerability has been resolved:
s390/dasd: Do not complete a failed ESE read as successful
dasd_int_handler() completes an NRF read of an unallocated ESE track by
calling ese_read() and unconditionally marking the request
DASD_CQR_SUCCESS. dasd_eckd_ese_read() can return an error before it has
zeroed the destination buffer: a failed sense-data parse or a current
track outside the requested range both return early, leaving the
destination pages untouched. The request is still completed successfully,
so the block layer is handed stale / uninitialized memory instead of
zeros.
Check the ese_read() return val
Без оценкиEPSS 0,18%Нет опубликованного исправления
s390/dasd: Guard sysfs discipline callbacks against unallocated private data
In the Linux kernel, the following vulnerability has been resolved:
s390/dasd: Guard sysfs discipline callbacks against unallocated private data
Several sysfs show/store handlers call a discipline callback that
dereferences device->private, either directly or through the
DASD_DEFINE_ATTR() macro. During dasd_generic_set_online() the discipline
is assigned before check_device() allocates device->private, so an
unprivileged read of one of these world-readable attributes in that window
dereferences a NULL pointer and panics.
Guard the dereference inside each callback that actually touches
device->private.
Высокий · CVSS 7EPSS 0,15%Нет опубликованного исправления
s390/dasd: Propagate partial completion length across ERP recovery
In the Linux kernel, the following vulnerability has been resolved:
s390/dasd: Propagate partial completion length across ERP recovery
dasd_default_erp_postaction() copies the timing and device state from
the finished ERP request back to the original request but drops
proc_bytes. A request that was partially completed, an ESE read of a
not-yet-allocated track returns fewer bytes than requested, and then
recovered through the ERP chain loses its partial-completion length.
__dasd_cleanup_cqr() then sees proc_bytes == 0 and completes the whole
request instead of requeueing the remainder, silently returning zeroed
data for the part that was nev
Высокий · CVSS 8.4EPSS 0,19%Нет опубликованного исправления
iommu/msm: Unwind probe state on registration failure
In the Linux kernel, the following vulnerability has been resolved:
iommu/msm: Unwind probe state on registration failure
msm_iommu_probe() adds its devm-managed IOMMU object to
qcom_iommu_devices before adding the IOMMU sysfs device and registering
it with the IOMMU core.
If iommu_device_sysfs_add() fails, probe returns with the object still on
qcom_iommu_devices. The driver core then releases the devm allocation,
leaving a dangling list entry that later list walks may dereference.
If iommu_device_register() fails, the same dangling list entry remains
and the sysfs device is left registered as well.
Unwind the sysfs device and global li
iommu/vt-d: Force requesting ACS when tboot is enabled
In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Force requesting ACS when tboot is enabled
Currently the conditions of requesting ACS in detect_intel_iommu()
don't include tboot, leading to a possible misconfiguration with ACS
disabled (e.g. due to user opts) while iommu is later forced on by
tboot_force_iommu().
Fix it by checking tboot in detect_intel_iommu().
Высокий · CVSS 7.8EPSS 0,13%Нет опубликованного исправления
mmc: via-sdmmc: cancel card-detect work on remove
In the Linux kernel, the following vulnerability has been resolved:
mmc: via-sdmmc: cancel card-detect work on remove
Disabling the device interrupt and freeing the IRQ prevents new card-detect
work from being queued, but carddet_work already queued by the handler can
still run after via_sd_remove() returns. via_sdc_card_detect() recovers the
host through container_of() and dereferences its MMIO base; once remove()
returns the host can be freed, so that work would touch freed memory.
Cancel carddet_work after freeing the IRQ and before cancelling
finish_bh_work, which the card-detect handler can also queue. carddet_work
can re-enable the i
Высокий · CVSS 7.1EPSS 0,13%Нет опубликованного исправления
ipmi: ipmb: validate write message length
In the Linux kernel, the following vulnerability has been resolved:
ipmi: ipmb: validate write message length
ipmb_write() read message fields before validating the length byte.
A zero or short write can read uninitialized stack bytes.
A length smaller than the SMBus header underflows the block write length.
Require a non-empty buffer and the minimum IPMB request length.
Also require the length byte plus payload before parsing the message.
Без оценкиEPSS 0,18%Нет опубликованного исправления
ipmi: si: Fix NULL pointer dereference after failed registration
In the Linux kernel, the following vulnerability has been resolved:
ipmi: si: Fix NULL pointer dereference after failed registration
try_smi_init() allocates new_smi->si_sm and later calls
ipmi_register_smi_mod(), which maps to ipmi_add_smi().
During ipmi_add_smi(), the upper IPMI message handler obtains the
initial BMC device information through __bmc_get_device_id(). This can
fail if the BMC does not return a successful response to the Get Device
ID command.
When the BMC returns a nonzero completion code, the device-id helper
retries the command and eventually returns -EIO if the device ID still
cannot be fetched.
On this failure path,
Высокий · CVSS 8.1EPSS 0,31%Нет опубликованного исправления
net/iucv: filter frames in afiucv_hs_rcv() by ingress device
In the Linux kernel, the following vulnerability has been resolved:
net/iucv: filter frames in afiucv_hs_rcv() by ingress device
afiucv_hs_rcv() selects a socket from iucv_sk_list by matching four 8-byte
name fields in the transport header alone. No check is made against the
net_device the frame arrived on.
This can cause a frame arriving on any netdev to be delivered to an AF_IUCV
socket. Three problems follow.
First, a frame arriving over HiperSockets can be delivered to a socket
bound to the classic z/VM IUCV transport, which has iucv->hs_dev == NULL.
iucv_sock_bind() takes the classic path whenever the requested userid
matches iucv_us
In the Linux kernel, the following vulnerability has been resolved:
xdp: fix zero-copy frame layout
xdp_convert_zc_to_xdp_frame() clones an XSK packet into an order-0 page
and advertises PAGE_SIZE as its frame size. It allows the copied frame
to occupy the page tail needed by skb_shared_info and records zero
headroom even when metadata separates the frame header from packet data.
An AF_XDP zero-copy packet redirected through cpumap can therefore make
the skb overlap skb_shared_info or place it beyond the allocated page.
Limit the copied layout to SKB_WITH_OVERHEAD(PAGE_SIZE) and include the
metadata length in frame headroom. Redirect cal
Высокий · CVSS 7.8EPSS 0,16%Нет опубликованного исправления
slip: fix use-after-free in sl_sync()
In the Linux kernel, the following vulnerability has been resolved:
slip: fix use-after-free in sl_sync()
slip_devs[] stores bare net_device pointers and takes no reference on
them. sl_sync() and sl_alloc() walk that table from slip_open() under
rtnl_lock(), while an entry is dropped by sl_free_netdev(), which
sl_setup() installs as dev->priv_destructor.
priv_destructor is called from netdev_run_todo(), which deliberately
runs with the RTNL semaphore released so that it can sleep while waiting
for the device refcount to drop:
/* Snapshot list, allow later requests */
list_replace_init(&net_todo_list, &list);
__rtnl_unlock();
...
i
Высокий · CVSS 7.8EPSS 0,36%Публичный эксплойтНет опубликованного исправления
net: tun: bound receive headroom
In the Linux kernel, the following vulnerability has been resolved:
net: tun: bound receive headroom
tun_get_user() uses tun->align both as skb headroom and when choosing how
much packet data to keep linear. OVS can propagate an oversized headroom
request from another port to TUN or TAP.
When align is larger than the usable space in a one-page skb head,
SKB_MAX_HEAD(align) underflows and the result becomes negative when stored
in good_linear. That value later wraps when assigned to the size_t linear
variable, and tun_alloc_skb() can place skb->data outside the allocated
head.
Bound the headroom stored by TUN to the one-page skb-head budge
Без оценкиEPSS 0,21%Нет опубликованного исправления
net: dsa: realtek: use gpiod_set_value_cansleep for reset GPIO
In the Linux kernel, the following vulnerability has been resolved:
net: dsa: realtek: use gpiod_set_value_cansleep for reset GPIO
rtl83xx_reset_assert() and rtl83xx_reset_deassert() are only called from
the probe path, which may sleep and is not timing-critical. When the
reset GPIO is provided by a sleeping controller such as an I2C I/O
expander, gpiod_set_value() warns:
WARNING: drivers/gpio/gpiolib.c:4030 at gpiod_set_value+0x44/0x80, CPU#1: kworker/u16:4/61
Hardware name: B&O MAP CA33 Rev f (UNKNOWN) (DT)
Workqueue: events_unbound deferred_probe_work_func
pc : gpiod_set_value+0x44/0x80
lr : rtl83xx_probe+0x1d8/0x3a0
Call t