p PatchFirst

PatchFirst · Свежие уязвимости

Уязвимости linux-azure-fips · Страница 37

За последние 30 дней в linux-azure-fips опубликовано уязвимостей: 577; в каталоге KEV: 0.

Фильтры уязвимостей
Сбросить фильтры

Уязвимостей: 7995

  1. CVE-2026-97600

    Без оценкиEPSS 0,2%Нет опубликованного исправления

    ieee802154: cc2520: fix FIFOP work use-after-free

    In the Linux kernel, the following vulnerability has been resolved: ieee802154: cc2520: fix FIFOP work use-after-free The FIFOP interrupt handler queues cc2520_fifop_irqwork. On removal, cc2520_remove() only flushes the work. The devm-managed FIFOP IRQ remains active until after ->remove() returns and can queue the work again after that flush, allowing it to run after the private data is released. Disable the work with disable_work_sync() instead of flushing it, so the handler can no longer queue it once removal begins. Destroy the buffer mutex last, since the worker and the stop callback invoked through ieee802154_unregister_hw() both

    Опубликовано Обновлено
  2. CVE-2026-97599

    Без оценкиEPSS 0,21%Нет опубликованного исправления

    ieee802154: hwsim: serialize pib updates to fix double-free

    In the Linux kernel, the following vulnerability has been resolved: ieee802154: hwsim: serialize pib updates to fix double-free hwsim_update_pib() does an unserialized read-swap-free of phy->pib: pib_old = rtnl_dereference(phy->pib); ... rcu_assign_pointer(phy->pib, pib); kfree_rcu(pib_old, rcu); It assumes the RTNL is held, but ->set_channel is not always called under it: the mac802154 scan worker changes channels via drv_set_channel() without the RTNL. Such an update can race an RTNL-held one on the same phy; both read the same pib_old and both kfree_rcu() it, double-freeing the object. With SLUB percpu sheaves batching kfree_rcu(),

    Опубликовано Обновлено
  3. CVE-2026-97598

    Без оценкиEPSS 0,22%Нет опубликованного исправления

    ipv4: fib: bound automatic table ID allocation

    In the Linux kernel, the following vulnerability has been resolved: ipv4: fib: bound automatic table ID allocation fib_empty_table() probes every table ID from 1 until it finds a free one. IPv4 tables are stored in a 256-bucket hash table, so a dense set of IDs makes each probe walk a growing hash chain while RTNL is held. Automatic table assignment ("ip rule ... table 0") is an IPv4-only legacy path. Bound the automatically allocated ID to 4096 so the RTNL hold stays bounded, without changing lookups of explicitly specified table IDs. This changes user-visible behavior. A table-0 rule previously received the lowest free ID in 1..RT_TA

    Опубликовано Обновлено
  4. CVE-2026-97597

    Средний · CVSS 6.8EPSS 0,22%Нет опубликованного исправления

    ipv6: flowlabel: cap duplicate leases per socket

    In the Linux kernel, the following vulnerability has been resolved: ipv6: flowlabel: cap duplicate leases per socket ipv6_flowlabel_get() allocates an ipv6_fl_socklist entry for every successful GET. The recheck path for a compatible existing flowlabel links another lease without applying any lease admission check. Repeated GET requests for one shareable label can therefore grow a socket's lease list without bound. Reject a new unprivileged lease once the socket already holds FL_MAX_PER_SOCK leases. Check this on the shared recheck path so reuse of a globally interned label, including the fl_intern() collision path, is covered as well. New

    Опубликовано Обновлено
  5. CVE-2026-97596

    Без оценкиEPSS 0,22%Нет опубликованного исправления

    ipvs: reject invalid states in connection template sync records

    In the Linux kernel, the following vulnerability has been resolved: ipvs: reject invalid states in connection template sync records IPVS sync receivers validate protocol states before creating or updating a connection. For connection templates, however, they only log states outside the template state range and still store the value in the connection. A template can be returned by ordinary connection lookup. TCP and SCTP then use the invalid state as an index into their transition tables. Reject invalid template states in both sync protocol versions before looking up or modifying a connection. The version 1 path handles both IPv4 and IPv6

    Опубликовано Обновлено
  6. CVE-2026-97582

    Без оценкиEPSS 0,21%Нет опубликованного исправления

    hwmon: (gpio-fan) Fix use-after-free in alarm work

    In the Linux kernel, the following vulnerability has been resolved: hwmon: (gpio-fan) Fix use-after-free in alarm work fan_alarm_irq_handler() queues fan_data->alarm_work, but nothing cancels it. fan_alarm_notify() dereferences fan_data and its hwmon device. On unbind, devres frees the interrupt, which only waits for the handler itself, and then releases the hwmon device and fan_data, so a pending fan_alarm_notify() can run after those frees. Replace INIT_WORK() with devm_work_autocancel(), registered before devm_request_irq(). The devres cleanup then frees the interrupt first, so no new work can be queued, and cancels the work while fa

    Опубликовано Обновлено
  7. CVE-2026-97581

    Высокий · CVSS 7.1EPSS 0,21%Нет опубликованного исправления

    media: verisilicon: hantro: bound G2 HEVC tile loop to the buffer capacity

    In the Linux kernel, the following vulnerability has been resolved: media: verisilicon: hantro: bound G2 HEVC tile loop to the buffer capacity prepare_tile_info_buffer() writes one entry per tile into the tile_sizes DMA buffer, sized for a grid equal to the PPS uAPI array capacity. Use the bounded v4l2_hevc_pps_num_tile_columns() / v4l2_hevc_pps_num_tile_rows() helpers so the loops stay inside the buffer.

    Опубликовано Обновлено
  8. CVE-2026-97576

    Высокий · CVSS 7.8EPSS 0,16%Нет опубликованного исправления

    media: v4l2-ctrls: validate HEVC tile counts

    In the Linux kernel, the following vulnerability has been resolved: media: v4l2-ctrls: validate HEVC tile counts The stateless HEVC decoders read num_tile_columns_minus1 + 1 entries from column_width_minus1[] and num_tile_rows_minus1 + 1 from row_height_minus1[] and use them as tile-loop bounds, but std_validate_compound() does not bound these u8 counts. Reject a V4L2_CTRL_TYPE_HEVC_PPS with tiling enabled whose tile counts exceed the uAPI array capacity, mirroring the existing compound-control range checks.

    Опубликовано Обновлено
  9. CVE-2026-97573

    Высокий · CVSS 8.1EPSS 0,6%Нет опубликованного исправления

    bnxt_en: Handle buffer allocation failure in bnxt_rx_ring_reset()

    In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Handle buffer allocation failure in bnxt_rx_ring_reset() bnxt_rx_ring_reset() frees the ring buffers and then reallocates them, ignoring the result. bnxt_alloc_one_rx_ring() can fail in bnxt_alloc_one_tpa_info_data(), which returns -ENOMEM on the first failed allocation and leaves the remaining rxr->rx_tpa[] entries zeroed. The error isn't propagated up, so the loop in bnxt_rx_ring_reset continues and at the end the code re-enables TPA with partially unallocated rx_tpa array. This means that when the agg_id from hardware is mapped to a SW index in rxr->rx_tpa[],

    Опубликовано Обновлено
  10. CVE-2026-97572

    Без оценкиEPSS 0,22%Нет опубликованного исправления

    bnxt_en: Propagate RX ring init failures in bnxt_init_nic()

    In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Propagate RX ring init failures in bnxt_init_nic() bnxt_init_rx_rings() returns an error when bnxt_alloc_one_rx_ring() fails, but bnxt_init_nic() discards that return value and calls bnxt_init_chip(), which enables TPA. If an allocation fails, this could leave rxr->rx_tpa[] partially zeroed and TPA would be enabled over an array with zeroed entries. This would lead to a zeroed DMA address being handed out if the agg_idx is translated to a SW index at a zeroed entry. Fix this by propagating the error out of bnxt_init_nic(). Both callers already check its return va

    Опубликовано Обновлено
  11. CVE-2026-97566

    Средний · CVSS 4.8EPSS 0,21%Нет опубликованного исправления

    mptcp: pm: kernel: drop pending ADD_ADDR when removing ID0

    In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: kernel: drop pending ADD_ADDR when removing ID0 The in-kernel MPTCP path manager can leave a stale ADD_ADDR announcement entry alive when removing the id 0 endpoint. This happens because the id 0 removal path does not tear down pending announcements, unlike the non-zero id path. When the PM later reselects id 0 after adding another signal endpoint, it finds the stale anno_list entry and hits WARN_ON_ONCE(mptcp_pm_is_kernel()) in mptcp_pm_announced_alloc(). Root cause: asymmetry between removal paths. - Non-zero id path: mptcp_nl_remove_subflow_and_signal_addr()

    Опубликовано Обновлено
  12. CVE-2026-97565

    Высокий · CVSS 7.1EPSS 0,2%Нет опубликованного исправления

    smb: client: reject short READ responses in CIFSSMBRead()

    In the Linux kernel, the following vulnerability has been resolved: smb: client: reject short READ responses in CIFSSMBRead() CIFSSMBRead() reads DataLengthHigh, DataLength and DataOffset out of the READ_RSP returned by the server without first checking that a whole READ_RSP was actually received. The length of the response is recorded in rsp_iov.iov_len, but nothing constrains it to be at least read_rsp_size before those fields are dereferenced. A malicious or compromised SMB1 server can return a response shorter than the READ_RSP header, so that parsing the header itself reads past the end of the receive buffer. SMB1 is not negotiated by

    Опубликовано Обновлено
  13. CVE-2026-97564

    Высокий · CVSS 8.5EPSS 0,22%Нет опубликованного исправления

    smb: client: reject userspace cifs.idmap descriptions

    In the Linux kernel, the following vulnerability has been resolved: smb: client: reject userspace cifs.idmap descriptions cifs.idmap key descriptions carry authority-bearing fields (owner and group SIDs and uid/gid values in "os:"/"gs:"/"oi:"/"gi:" form) that the cifs.idmap upcall helper treats as kernel-originating inputs. Unlike its sibling cifs.spnego, the cifs.idmap key type has no vet_description hook, so userspace can create keys of this type through request_key(2)/add_key(2) and supply those fields without CIFS origin. A request_key(2) call with a non-NULL callout then drives a root usermodehelper upcall (/sbin/request-key -> cifs.i

    Опубликовано Обновлено
  14. CVE-2026-97563

    Средний · CVSS 6EPSS 0,19%Нет опубликованного исправления

    smb: client: reject out-of-bounds DataOffset in CIFSSMBRead()

    In the Linux kernel, the following vulnerability has been resolved: smb: client: reject out-of-bounds DataOffset in CIFSSMBRead() The SMB1 synchronous read helper CIFSSMBRead() validates the server's DataLength against CIFSMaxBufSize and the caller's count, but never validates DataOffset. The copy source is formed as &pSMBr->hdr.Protocol + le16_to_cpu(pSMBr->DataOffset) and memcpy()'d for DataLength bytes with no check that the [DataOffset, DataOffset + DataLength) range lies within the response actually received from the server. A malicious or compromised SMB1 server can return a response carrying an in-range DataLength and a large Dat

    Опубликовано Обновлено
  15. CVE-2026-97562

    Высокий · CVSS 7.5EPSS 0,41%Нет опубликованного исправления

    smb: client: pin DFS superblock in iterator callback

    In the Linux kernel, the following vulnerability has been resolved: smb: client: pin DFS superblock in iterator callback tcon_super_cb() stores a raw superblock pointer, but __cifs_get_super() takes its active reference only after iterate_supers_type() has dropped s_umount and its passive reference. Concurrent DFS automount expiry can therefore free the superblock before cifs_sb_active() uses it. A deterministic KASAN test reproduces the race as: BUG: KASAN: slab-use-after-free in cifs_sb_active+0x77/0x80 The same test passes with this change applied. Take the active reference in the callback while iterate_supers_type() still holds s_

    Опубликовано Обновлено
  16. CVE-2026-97561

    Средний · CVSS 5.3EPSS 0,21%Нет опубликованного исправления

    smb: client: honor forceuid/forcegid when mapping SIDs to uid/gid

    In the Linux kernel, the following vulnerability has been resolved: smb: client: honor forceuid/forcegid when mapping SIDs to uid/gid When the administrator mounts with forceuid or forcegid (uid=/gid= mount options), they expect all files to appear owned by the specified user/group. However, several code paths unconditionally called sid_to_id() to overwrite cf_uid/cf_gid with server-provided values, ignoring the administrator's explicit override: - smb311_posix_info_to_fattr() (stat via POSIX extensions) - cifs_posix_to_fattr() (readdir via POSIX extensions) - parse_sec_desc() (CIFS ACL ownership mapping) This allowed an untrusted

    Опубликовано Обновлено
  17. CVE-2026-97559

    Низкий · CVSS 2EPSS 0,21%Нет опубликованного исправления

    smb: client: fail DACL rewrite when the new DACL exceeds 64K

    In the Linux kernel, the following vulnerability has been resolved: smb: client: fail DACL rewrite when the new DACL exceeds 64K replace_sids_and_copy_aces() and set_chmod_dacl() accumulate the size of the DACL they build in a u16. That accumulator can wrap. validate_dacl() caps num_aces at (dacl_size - sizeof(struct smb_acl)) / 20, i.e. 3276 for a maximally sized DACL, while each rewritten ACE can grow to sizeof(struct smb_ace) (76 bytes) once its SID is replaced with one carrying SID_MAX_SUB_AUTHORITIES sub-authorities. The worst case is therefore sizeof(struct smb_acl) + 3276 * 76 = 248984 bytes, far beyond what a u16 can hold. A wrapar

    Опубликовано Обновлено
  18. CVE-2026-97558

    Средний · CVSS 5.7EPSS 0,23%Нет опубликованного исправления

    smb: client: fix cifsFileInfo reference leak in deferred close

    In the Linux kernel, the following vulnerability has been resolved: smb: client: fix cifsFileInfo reference leak in deferred close When cifs_close() defers a close, it hands the cifsFileInfo reference of the closing struct file to the queued work. Each execution of smb2_deferred_work_close() drops one such reference. deferred_close_scheduled can be false while the work is pending: the workqueue clears PENDING when the callback starts to run, before the callback clears the flag under deferred_lock. A close in that interval requeues the running work, and the callback then clears the flag, leaving the requeued work pending with the flag down.

    Опубликовано Обновлено
  19. CVE-2026-97557

    Высокий · CVSS 7.5EPSS 0,7%Нет опубликованного исправления

    smb: client: avoid leaking refcount in cifs_queue_oplock_break()

    In the Linux kernel, the following vulnerability has been resolved: smb: client: avoid leaking refcount in cifs_queue_oplock_break() cifs_queue_oplock_break() unconditionally takes a reference on the target file before queueing cifs_oplock_break(). Only that work item decreases the reference counter again. If another oplock break arrives while that work is still queued, queue_work() will return false and not queue this second work item. As a result, we will never reach the point to drop the file reference again and are leaking this reference. This can be triggered when interacting with a slow-responding server. As a result, later unmount

    Опубликовано Обновлено
  20. CVE-2026-97556

    Без оценкиEPSS 0,21%Нет опубликованного исправления

    smb: client: avoid leaking refcount when cifs_sb_tlink() fails

    In the Linux kernel, the following vulnerability has been resolved: smb: client: avoid leaking refcount when cifs_sb_tlink() fails cifs_oplock_break() takes over the reference that cifs_queue_oplock_break() acquired when it queued the work, and drops it with _cifsFileInfo_put() once the break has been processed. Only in setups with "-o multiuser", cifs_sb_tlink() may fail, at which point cifs_oplock_break() returns without putting the file reference, mirroring the reference leak we already fixed in the companion patch to cifs_queue_oplock_break(). This would trigger a crash due to busy inodes on the next unmount: BUG: Dentry ... still

    Опубликовано Обновлено

Проверьте свой сервер

Сопоставьте установленный стек и версии со свежими базами уязвимостей.

Проверьте свой сервер →