Без оценкиEPSS 0,21%Нет опубликованного исправления
mm/mm_init: handle alloc_percpu failure in free_area_init_core_hotplug
In the Linux kernel, the following vulnerability has been resolved:
mm/mm_init: handle alloc_percpu failure in free_area_init_core_hotplug
We miss a failed allocation check for pgdat->per_cpu_nodestats, which
results in a NULL deref when we offset into the per-cpu area.
Propagate -ENOMEM up the stack and leave per_cpu_nodestats pointing
at boot_nodestats so a later online can retry the allocation.
hotadd_init_pgdat() returns NULL on failure, which __try_online_node()
already maps to -ENOMEM.
On failure nothing needs to be unwound:
- the node is never marked online
- per_cpu_nodestats is left pointing at boot_nodestats
- __add_memor
Высокий · CVSS 7.8EPSS 0,18%Нет опубликованного исправления
dmaengine: xilinx_dma: Fix channel idle state management in AXIDMA and MCDMA interrupt handlers
In the Linux kernel, the following vulnerability has been resolved:
dmaengine: xilinx_dma: Fix channel idle state management in AXIDMA and MCDMA interrupt handlers
Fix a race condition in AXIDMA and MCDMA irq handlers where the channel
could be incorrectly marked as idle and attempt spurious transfers when
descriptors are still being processed.
The issue occurs when:
1. Multiple descriptors are queued and active.
2. An interrupt fires after completing some descriptors.
3. xilinx_dma_complete_descriptor() moves completed descriptors to
done_list.
4. Channel is marked idle and start_transfer() is called even though
active_list still conta
Без оценкиEPSS 0,17%Нет опубликованного исправления
dmaengine: xilinx_dma: Fix CPU stall in xilinx_dma_poll_timeout
In the Linux kernel, the following vulnerability has been resolved:
dmaengine: xilinx_dma: Fix CPU stall in xilinx_dma_poll_timeout
Currently when calling xilinx_dma_poll_timeout with delay_us=0 and a
condition that is never fulfilled, the CPU busy-waits for prolonged time
and the timeout triggers only with a massive delay causing a CPU stall.
This happens due to a huge underestimation of wall clock time in
poll_timeout_us_atomic. Commit 7349a69cf312 ("iopoll: Do not use
timekeeping in read_poll_timeout_atomic()") changed the behavior to no
longer use ktime_get at the expense of underestimation of wall clock
time which appears to be very l
Без оценкиEPSS 0,22%Нет опубликованного исправления
csky: Fix a4/a5 restoration in syscall trace path
In the Linux kernel, the following vulnerability has been resolved:
csky: Fix a4/a5 restoration in syscall trace path
The syscall trace path reloads syscall arguments from pt_regs before
calling the syscall handler. On C-SKY ABIv2, the 5th and 6th syscall
arguments are prepared as stack arguments before invoking syscallid.
The current code adjusts sp before loading LSAVE_A4 and LSAVE_A5. Since
those offsets are relative to the original pt_regs base, loading them
after changing sp fetches the wrong slots. As a result, traced syscalls
that use the 5th or 6th argument may receive corrupted arguments.
This is visible with mmap2(), which takes
Высокий · CVSS 7.7EPSS 0,18%Нет опубликованного исправления
platform/chrome: sensorhub: Fix memory overread in ring handler
In the Linux kernel, the following vulnerability has been resolved:
platform/chrome: sensorhub: Fix memory overread in ring handler
`max_response` and `sensor_num` are read from different EC commands:
- `max_response` is from cros_ec_get_proto_info().
ec_dev->max_response = info->max_response_packet_size -
sizeof(struct ec_host_response);
- `sensor_num` is from cros_ec_get_sensor_count().
sensor_num = cros_ec_get_sensor_count(ec);
With a malfunctioning EC firmware, it is possible that the `msg->insize`
(i.e., `fifo_info_length` in the context) could be clamped in
cros_ec_cmd_xfer() because `msg
Без оценкиEPSS 0,21%Нет опубликованного исправления
hwrng: core - fix rng list on registration error
In the Linux kernel, the following vulnerability has been resolved:
hwrng: core - fix rng list on registration error
hwrng_register(rng) does the following:
1. Checks if rng has name and read methods set
2. Checks if the name already exists
3. Adds rng to global rng_list
4. May try to set rng to current_rng
If step 4 fails, it returns an error. However, it does not remove the
rng from rng_list, causing a dangling reference which can result in
use-after-free if the caller frees rng, since registration failed.
Add a list_del_init() cleanup step.
Без оценкиEPSS 0,21%Нет опубликованного исправления
crypto: qat - clear AES key schedule from stack
In the Linux kernel, the following vulnerability has been resolved:
crypto: qat - clear AES key schedule from stack
qat_alg_xts_reverse_key() expands the forward XTS AES key on the stack.
That schedule contains key material and can remain in the stack frame.
Clear the temporary crypto_aes_ctx with memzero_explicit() after the copy.
Без оценкиEPSS 0,18%Нет опубликованного исправления
crypto: atmel-ecc - reject hardware ECDH without a public key
In the Linux kernel, the following vulnerability has been resolved:
crypto: atmel-ecc - reject hardware ECDH without a public key
The hardware ECDH path in atmel_ecdh_compute_shared_secret() uses the
private key stored in the device. However, the public key is cached only
after atmel_ecdh_set_secret() successfully generated that private key
for the current tfm.
atmel_ecdh_generate_public_key() already rejects requests when no public
key is cached. Add the same check to atmel_ecdh_compute_shared_secret()
to prevent the device from using a private key that was not generated
for the current tfm.
Без оценкиEPSS 0,22%Нет опубликованного исправления
crypto: atmel-sha204a - fix heap info leak on I2C transfer failure
In the Linux kernel, the following vulnerability has been resolved:
crypto: atmel-sha204a - fix heap info leak on I2C transfer failure
The nonblocking RNG path allocates a work_data structure to track the
state of an in-flight asynchronous I2C request. This pointer is stored
in rng->priv and later consumed by the read path once the transaction
completes.
If the underlying I2C transfer fails, the completion callback is invoked
with a non-zero status. In this case, the allocated work_data is not
usable for producing RNG output and must not remain associated with the
hwrng state.
Previously, the failure path only logged a warning but left th
Без оценкиEPSS 0,22%Нет опубликованного исправления
crypto: sa2ul - stop probe if context pool creation fails
In the Linux kernel, the following vulnerability has been resolved:
crypto: sa2ul - stop probe if context pool creation fails
sa_ul_probe() calls sa_init_mem() to create the DMA pool used for
security context buffers, but ignores its return value. If pool creation
fails, probe still continues with DMA setup, algorithm registration and
child population even though later request setup depends on that pool.
Stop probing when sa_init_mem() fails, and route that failure to the PM
cleanup path without attempting to destroy an uncreated DMA pool.
Без оценкиEPSS 0,21%Нет опубликованного исправления
crypto: keembay - Fix AEAD unregister count in error path
In the Linux kernel, the following vulnerability has been resolved:
crypto: keembay - Fix AEAD unregister count in error path
register_aes_algs() registers the AEAD algorithms before registering the
skcipher algorithms. If skcipher registration fails, the function unwinds
the earlier AEAD registration with crypto_engine_unregister_aeads(), but it
passes ARRAY_SIZE(algs), which is the skcipher table size.
Use ARRAY_SIZE(algs_aead) for the AEAD unwind path so the unregister helper
iterates over the same table that was registered. Also clarify the nearby
comment: the crypto registration helpers clean up algorithms registered
within the same
Высокий · CVSS 7.8EPSS 0,17%Нет опубликованного исправления
RDMA/irdma: Add refcounting to user ring MRs
In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Add refcounting to user ring MRs
Prevent userspace from deregistering the MRs that back QP/CQ/SRQ rings
by bumping the MR's refcount upon association.
Высокий · CVSS 7.5EPSS 0,68%Нет опубликованного исправления
nvmet-rdma: fix response resource leak on queue teardown
In the Linux kernel, the following vulnerability has been resolved:
nvmet-rdma: fix response resource leak on queue teardown
When an nvme target with rdma transport is removed while I/Os are in
flight, a response can be posted but its send completion is never
delivered before the connection is torn down. As a result
nvmet_rdma_send_done() and nvmet_rdma_release_rsp() are never called for
the response, and this leaks the allocated RDMA read/write context and
request SGLs.
These leaks are recreated by running blktests nvme/061 with the rdma
transport and the siw driver. Kernel kmemleak feature reports them as
follows:
unreferenced object
In the Linux kernel, the following vulnerability has been resolved:
cgroup/cpuset: Make nr_deadline_tasks an atomic_t
The nr_deadline_tasks variable in the cpuset structure was introduced by
commit 6c24849f5515 ("sched/cpuset: Keep track of SCHED_DEADLINE task
in cpusets"). It is reported by sashiko [1] that nr_deadline_tasks
can currently be modified by inc_dl_tasks_cs() under rq->lock and
by cpuset_attach() under cpuset_mutex. So if both updates happen
simultaneously, the nr_deadline_tasks variable can be corrupted leading
to incorrect operations down the road.
Fix that by changing its type to atomic_t so that nr_deadline_tasks
are alway
Средний · CVSS 5.7EPSS 0,21%Нет опубликованного исправления
wifi: mac80211_hwsim: avoid NULL skb in stop queue drain
In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211_hwsim: avoid NULL skb in stop queue drain
mac80211_hwsim_stop() drops any frames left in data->pending. The loop
currently checks skb_queue_empty() and then dequeues separately.
That split is racy with TX status handling, which can remove a pending
frame under the queue lock. If the last entry is removed after the empty
check, skb_dequeue() returns NULL and the stop path passes that NULL skb
to ieee80211_free_txskb().
Use skb_dequeue() as the loop condition instead. The dequeue result is the
object that stop owns and frees, and a concurrent status completio
time/namespace: Validate nanosecond field in proc_timens_set_offset()
In the Linux kernel, the following vulnerability has been resolved:
time/namespace: Validate nanosecond field in proc_timens_set_offset()
The function validates tv_sec to be within [-KTIME_SEC_MAX, KTIME_SEC_MAX]
but never validates that tv_nsec is within the valid range of
[0, NSEC_PER_SEC-1] before using it in timespec64_add().
timespec64_add() expects both timespec64 structures to have normalized
values with tv_nsec in the range [0, 999999999]. If off->val.tv_nsec
contains invalid values (negative or >= NSEC_PER_SEC), it could lead to
incorrect calculations or unexpected behavior.
Add validation to ensure tv_nsec is within the valid ra
Без оценкиEPSS 0,22%Нет опубликованного исправления
clk: qcom: gdsc: tear down per-domain genpds in gdsc_unregister()
In the Linux kernel, the following vulnerability has been resolved:
clk: qcom: gdsc: tear down per-domain genpds in gdsc_unregister()
gdsc_unregister() removes the OF provider entry and tears down the
parent/subdomain wiring, but never calls pm_genpd_remove() on the
individual generic_pm_domain structures registered by gdsc_init():
void gdsc_unregister(struct gdsc_desc *desc)
{
struct device *dev = desc->dev;
size_t num = desc->num;
gdsc_pm_subdomain_remove(desc, num);
of_genpd_del_provider(dev->of_node);
}
That leaves dangling entries on the global gpd_list. After a provider
unbind/rebind cycle (deferred-probe replay during e
Без оценкиEPSS 0,21%Нет опубликованного исправления
thermal/drivers/rcar: Fix error checking in probe()
In the Linux kernel, the following vulnerability has been resolved:
thermal/drivers/rcar: Fix error checking in probe()
This code accidentally calls thermal_zone_device_enable() before checking
whether thermal_zone_device_register_with_trips() failed. Move the call
until later to avoid an error pointer dereference of "priv->zone".
The driver works differently depending on if we are using OF thermal or
not. We use thermal_add_hwmon_sysfs() if we are using OF thermal and
call thermal_zone_device_enable() if not. We can share same error check
for if either of these fail.
Moving the thermal_zone_device_enable() call is a bit cleaner as wel
Без оценкиEPSS 0,22%Нет опубликованного исправления
usb: gadget: r8a66597: avoid double free of ep0_req in probe error path
In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: r8a66597: avoid double free of ep0_req in probe error path
If usb_add_gadget_udc() fails, r8a66597_probe() jumps to err_add_udc
and frees ep0_req, then falls through to clean_up2 where ep0_req is
freed again when it is non-NULL.
Remove the redundant free from err_add_udc and keep the cleanup in
clean_up2 so the request is released exactly once.
Issue found using a prototype static analysis tool
and confirmed by code review.
Без оценкиEPSS 0,22%Нет опубликованного исправления
udf: Mark LVID buffer as uptodate before marking it dirty
In the Linux kernel, the following vulnerability has been resolved:
udf: Mark LVID buffer as uptodate before marking it dirty
When an I/O error occurs while writing the Logical Volume Integrity
Descriptor (LVID) buffer to the block device, the block layer's completion
handler (`end_buffer_write_sync()`) clears the `BH_Uptodate` flag on the
buffer. However, the buffer still contains valid LVID data in memory. If
the filesystem is subsequently remounted read-write or synced,
`udf_open_lvid()` or `udf_sync_fs()` will modify the LVID buffer and call
`mark_buffer_dirty()`. This triggers a spurious
`WARN_ON_ONCE(!buffer_uptodate(bh))` warning in